Equium A60-692: Texas controller ieee 1394 host controller starts is not getting started

I had unfortunately no response about the foregoing. I have Equium A60-692 and installed the new copy of XP.

Before that, I inherited machine with power stuck on the password. Former owner had left standing for several months and said this seems to cause this not tentatives not this setting. I managed to use a rider based on the to remove, but now I think it was a symptom of more serious problems (but maybe I did something BIOS?)

The controller seems to be when the machine is hot (strange). Fact that average anomaly map mother re ccomponent ventilation cold?

Any help here, because I have tried everything I can.

Have you set the BIOS to default settings?

Hmmm... What about the question of hot/cold? I imagine that certain welded components can lose connectivity when the laptop is cold.
In my opinion, you should install driver chipset when possible. Subsequently disable device firewire in Device Manager. I mean that this port is probably not so important to you. Isn t it?

Tags: Toshiba

Similar Questions

  • Ieee 1394 host controller Texas Equium A60-692 does not start

    Hello!

    I have a Toshiba Equium A60-692 about 2 years old. On rare occasions the above will install and also the network/ethernet card etc with it when it starts. But 99% of the time it fails to start upward.

    Tech from Toshiba tell me it's the CMOS battery, but time slept OK for the last week so maybe it could be something else. Other strange things are can only recognize the drive HARD to start from what IDE Standard is chosen in the BIOS options (Enhanced IDE option and I think only used normal overall, ups causes boot errors). Also a green screen with weird graphics on occasion. Also the speed of the processor can be reduced, as shown in the properties of my computer.

    Any ideas from anyone as worried of wasting time to unsolder the battery if this isn't the problem. Could this be a fault of the motherboard that is irreparable? I am a relative novice if need help someone here. This made me!

    Hello

    I think you might be right. Eventually he s a small part on the motherboard that could malfunction.
    If I m not mistaken the controller IEEE 1394 Texas Instruments could be the Firewire port and it s part of the mobo

    Welcome them

  • Texas Instruments OHCI Compliant IEEE 1394 Host Constroller - cannot be enabled

    Texas Instruments OHCI Compliant IEEE 1394 Host Constroller (for i-link) is disabled and I have / windows can't activate.

    This is the first time I tried to use it and did not notice the errors to do with it in the past.

    Is this option enabled by default on new machines. The only thing I can think of that could have affected via my use is by Norton. In the contrary case, the laptop is a new.

    Someone else knows what - all assistance. Thanks.M

    May I ask what laptop you have, what OS you are using, and what exactly you want to do?

    Thanks ;)

  • How can I get the Bus IEEE 1394 Host controller driver to show up in Device Manager?

    I try to activate my new Firewire Interface M-Audio Solo and I encountered a small problem.
    I recently bought a PCI card on eBay and I hope that it is not defective because even if the blue light on my Solo M-Audio lights when I insert it into the firewire port, I don't see this pop up on my computer screen. In addition to this, I discovered that the Bus IEEE 1394 Host controller is not installed on my computer (Windows XP)...
    Can anyone help please?

    Of my experience with the installation of port expansion cards (USB, Firewire, etc.), they always require facilities suitable driver to work properly.  The card comes with an installation disc, or have some sort of instructions for you inform to download the latest drivers for the device from the manufacturer's website?

  • What are the cards WiFi are Equium A60-692-compatible?

    Hi all
    I have a Toshiba Equium A60-692 (model: PSA67E-001001EN). It has a wifi, lid at the rear for a wifi card, but I can't seem to find a list of anywhere where wifi cards are compatible. Someone would be able to provide me with a list of compatible cards!

    Some people said that the Toshiba Equium A60-692 does not support a Wifi but as there is a sign for one at the back I guess that it is wifi ready! In the connectivity for the Athros Wizard, he says also there a 1394 connection, but it does not have a card.

    I found a few on ebay and I want to know if they will be compatible:

    (1) Toshiba 802. 11a / g Wireless LAN Mini PCI Card - Netzwerkkarte, Mini PCI - 802. 11 b, 802. 11A, 802. 11 g, PA3298U-1MPC

    (2) Toshiba WLAN Mini PCI PA3300U-1MPC 54 megabit 802.11 g/b

    (3) TOSHIBA WLAN MINI PCI 54 Mbps 802. 11a / b PA3273U-1MPC

    (4) Toshiba PA3300U-2MPC card WiFi Kit 802.11 g 54 Mbps NEU

    Thank you for your time and I look forward to your responses!

    Neil

    Post edited by: neilsalexander

    Hello

    If s said Atheros has a connection 1394 so I guess this means that the firewire.
    The IEEE 1394 mean the firewire connection available on this laptop.

    Anyway, the WiFi network is not available and if you want to use WLan technology on your laptop if you use the WLAN USB key. It is the simplest way to connect to the wireless LAN.

  • Equium A60-692: Question on the RAM size

    I have an Equium a60-692, which indicates that she has a 256 MB DDR Ram. When I check the system, he says he has 197 MB of Ram. I am told that this is due to the pilot of the screen using the other 60 MB. Which seems big to me or is this normal? I also find that the machine is slow to start and open programs. Is it because of the limited amount of Ram (197 MB)? An increase in Ram would solve my problem?

    Hi Ron,

    You available RAM is 256 MB, and that the BIOS reserves a small portion for the graphics card. The normal distribution is 64 MB for that you will 192Mo of left RAM for use by the operating system. 64 MB is quite normal for the use of graphics (and is small enough to some modern games). You may be able to reduce the amount (say, at 32 MB) in your BIOS (check allocation UMA).

    Slow loading may indicate that your HARD drive is a grooming needs. I recommend running Disk Cleanup on your Start menu, followed by Disk Defragmenter also in the menu START. This will ensure that you schedule the files and folders are properly located and organized for use.

    Increasing your RAM probably will not help your slow loading problem, although it will improve the performance of games and utilities of great resources by reducing the use of the swap file.

    HTH

    Post edited by: NickyNoogle

  • Equium A60-692: sudden failure

    I have an equium A60-692, a little more than 9 months. For the past few weeks the computer just turned off while I'm working, especially watching a dvd. I removed the battery and restarted and worked normally. Is something wrong with the battery or the computer uses not common but the passage to the battery?

    Any help would be appreciated.
    David.

    HI David,

    There are two possible reasons for your problem,

    1: the laptop may be overheating leading to the power off. Normally, it is clearly the fan increased before the laptop closed.

    If this is the case try any dust/debris from your cooling fans with a compensation vacuum hose.

    2: your power system could suffer an intermittent contact of your power connector on your laptop, which causes the phone switch to battery power, even if the power supply is connected. Usually, this will require a power-stop/restart to restore normal operation. If this is the case, you will notice the low battery alarm.

    At 9 months, it is likely that dust/debris is your culprit so I would check that first.

    If you suspect your power connector then you should always be covered by your warranty even if you have to convince your repairman is not due to 'normal' wear

    HTH

    Post edited by: NickyNoogle

  • Equium A60-692-power - laptop gets no power

    Hey

    My Equium A60 - 692 has ceased all powered by the AC adapter (though I measured it and its give a good 19v). I noticed the end of the adapter (the end that goes into the laptop) is different from the normal ones. Rather than having a hole in the center that integrates a pic on the laptop, it's just got a piece of flat metal. Wondering that was normal and the problem is inside your computer laptop or if the latter has somehow broken and is stuck in the adapter. It looks like its supposed to be that way, but it seems a little weird...

    see you soon

    HELLO Rodders,

    I fear bad news. The flat piece of metal that you describe is the rear part of the central axis that broke inside the power jack on your laptop. It is quite a common phenomenon (check some other posts on these forums).

    Unfortunately, the solution to this problem is for your authorized Service partner nearest replace the motherboard (expensive!) unless you can find someone ready to weld in a new socket.

    Sorry to be the bearer of bad news.

    Kind regards

  • iPod and Equium A60-692

    I'm the unhappy owner of a mini ipod since Christmas, having had the thing replaced twice as format on my Toshiba Equium A60-692 caused an error of hard disk (irreparable). I hear on the grapevine that there is a known fault.
    Someone at - it help him?

    Hello

    I have no experience with this, but it will be interesting to know what exactly is happening, if you try to start the iPod. In my opinion you should try to find a solution on apple support page. Check it on http://www.apple.com/support/ipod/gethelp/.

  • Equium A60-692: memory upgrade question

    Hi, I want to improve my memory. I wanted to add a memory of 1 GB on the extra slot but I wanted to be sure that I'm looking for, I don't know much about it and I want to ensure I have buy one that is compatible with everything. If someone knows something about this answer please.
    Thank you

    Hello

    Well, you're first time here in the forum ;) Welcome!

    Now to your question. AFAIK the Equium A60-692 was delivered with an internal memory of 256 MB. This module cannot be deleted.
    Additional memory location is available and you can upgrade the memory for max 1280MB (256 MB + 1024 MB) in this case, you can use a 1 024 MB module.

    You use PC2100 DDR - RAM memory modules.
    Also, I found one that you can use without any problems. The reference is: 1024Mo PC2700 (PA3313U-1M1G)

    It may be useful

  • Event generated by the user 'anonymous' the host 'CIS '. Could not get the reference.

    Hello

    We have integrated our portal customized with the AAU in document taskflows webcenter application.
    We are not able to view the Soum, extracted from the Complutense University of MADRID. Here's the error to get connected UCM whenever we access the application.

    Event generated by the user 'anonymous' the host 'CIS '. Could not get the reference. Can not read the file. [Details]
    An error has occurred. The stack trace below shows more information.

    ! csUserEventMessage, anonymous, CIS! $! csCollectionUnableToGetReference! csCollectionCannotRead
    intradoc.common.ServiceException:! csCollectionUnableToGetReference! csCollectionCannotRead
    * ScriptStack COLLECTION_GET_REFERENCE
    3:getReferenceMeta, * no captured values *.
    at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
    at intradoc.server.Service.buildServiceException(Service.java:2260)
    at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
    Collections. CollectionUserHandler.getReferenceMeta (CollectionUserHandler.java:1765)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:600)
    at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
    at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:324)
    at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
    at intradoc.server.Service.doCodeEx(Service.java:533)
    at intradoc.server.Service.doCode(Service.java:505)
    at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
    at intradoc.server.Service.doAction(Service.java:477)
    at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
    at intradoc.server.Service.doActions(Service.java:472)
    at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1391)
    at intradoc.server.Service.executeActions(Service.java:458)
    at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:737)
    at intradoc.server.Service.doRequest(Service.java:1890)
    at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
    at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
    at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)
    to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)

    Kind regards
    Francis P

    What is the security group of your records? It is public.

  • Equium A60-692 - no power and removing the HARD drive

    The power has gone on my A60-692, the adapter is ok but there is just no no LED on the laptop. I had to get replaced a few years ago so maybe it is related to that of the power connector.

    I took to a local repair place, he said, it would cost more to fix this, so I should really find it useful laptop only think about recover my data.

    Is it really so hard to fix these things?
    How hard is it to make the hard drive out, & how would then access down my data?

    Thank you
    Dave

    Hello

    > I took to a local repair place, he said, it would cost more to fix this, so I should really find it useful laptop only think about recover my data.
    I agree with the authorized service provider. My personal opinion is that it s a malfunction of the motherboard and it is a very expensive part. Besides, Equium A60 is pretty old model so it would be better buy you a new laptop and recover your data.

    > How difficult is it to make the hard drive out, & how would then access down my data?
    It of not difficult, but I m really wondering why you need access to these data. You don t have a backup? In my opinion the backup is the most important thing you need to do on a computer.
    Anyway, normally on the underside of your laptop there is a HARD drive cover which is guaranteed by one or two screws. You must remove this cover and then you can see the HARD drive and you're able to remove it.
    Also buy an external HARD drive enclosure where you can install the HARD drive. Then you can connect it to another computer to back up your data. ;)

  • Equium A60-692. not all BIOS

    Hi all

    I just received an A60-692 that wouldn't work, I replaced the HARD drive because it was very noisy, and I had no display at all, now, when I boot with my windows disc I get a flashing bluish screen for one or two seconds then the rest of the screen on this blue/black color, I can get no Bios at all (f2) and can not move from here? any help would be appreciated,

    Francine

    You laptop as defective. I think the motherboard is faulty.
    If there is no BIOS at startup I fear you have big problem m.

    Sorry, but I think that there is nothing you can do to solve this problem, except the motherboard Exchange.

  • Equium A60-692 - cannot open the start menu and keyboard problem

    I have a problem starting my laptop A60-692 and I'm not near the points of service.

    When I push the power button the screen goes through its startup routine gives her marching band welcome charge to the top of my desk.
    But when I click on the start only the start window flashes for a split sec and remains standing. If I press the windows key on the keyboard I can then click on the start and the start window appears on the screen.

    However if I open a program like note book or internet explorer, the keyboard will not and only gives a Bell sound when I use the keyboard. If I click Start, then shut down and click on restart the laptop turns off and then restart everything works fine!

    It's very boring and tedious. I'struggled with this for a long time, although it was not like that when new.
    Everyone had the same problem or have any advice to give?
    I would be very grateful!

    Concerning

    Andrew

    Hello

    Believe me it is not easy to say what the problem is here.
    I would like to know where the mouse you are using. Use you touch pad s notebook or external mouse?
    If you use the s key to laptop please disable it with FN + F9 and test with an external mouse only.

    What about the response of the keyboard? You can also try to test with external keyboard only. Only in this way you can see if this issue has something to do with the internal keyboard.
    Please do some testing to see if this issues can be related to defective portable equipment.

  • How can I start Equium A60-692 backpack?

    the model number is A60-692, I want first of all to my computer in the BACK because I have a backup of my HARD drive made by norton ghost. while I am connected and using the operating system, it won't let me change some of the windows folders or files, so if I can start my computer backpack I can then delete the contents of my HARD drive and then restore the backup on the HARD disk.
    I need extract the contents of the backup to a flash drive or cd/dvd to be able to run windows from backup.

    is it possible to copy the backup of the operating system on the original HARD disk.
    concerning

    Hello

    I also use Norton ghost to back up. The Norton application runs on Windows XP Home edition. I always create the backup file on the second partition, and if something goes wrong I can restore OS using Norton and recorded image (file) to the second partition. If I'm not able to start the unit I can install WXP again on the first partition, install Norton and then restore from saved image. I don't have to change all folders or something. Just launch Norton Ghost and navigate to saved the image.

    Now to your problem: you didn t write the exact location of your HARD drive (partition that exist or not). You can use the external floppy drive and start with the startup disk or also create bootable CDs. How to do that you can read on http://www.nu2.nu/bootcd/

    Sorry, but your description of all the things you want to do is a little confusing to me.

Maybe you are looking for