Equium A60 does not restart

Similar Questions

• Equium A60 does not recognize the DVD ROM

  I am trying to use the product recovery dvd - rom on my Equium A60 and found that the reader not recoginse not the disc. I tried DVD movies, audio CD and other disks installion and all work well and the recovery disc is recognized on the other 2 computers I tried it on if the drive is not damaged.

  I've also tried uninstalled the driver and restart the computer, so the driver reinstalled, this allowed the disk to read once, but when I rebooted the computer run really drive it is came with the same messages "not found no bootable disk" he was not able to read again since.

  Can anyone help?

  Hold on! Have you tried to boot from the recovery DVD or have you tried to boot under Windows OS?

  I put t know exactly what could be wrong but sometimes a lens player could malfunction and could not calibrate correctly. In this case some mediums are not readable.

• Drive CD/DVD of Equium A60 does not work correctly

  Hello
  I just bought a used Equium A60. The seller reformatted the laptop using the player. However, the player will not play any disc now (I tried the CD, DVD and Toshiba load discs. The Device Manager shows the drive works, but the program tells me to insert a disk. Using advice gleaned on this forum I tried to clean the lens, System Restore, start with the key C pressed, tried F12, downloaded a driver for DVDram drive and finally remove the disk and submit.
  The seller said he always worked well for him and the laptop arrived in perfect condition. All you other ideas?

  Go to Device Manager and remove the CD/DVD drive.
  Then restart the laptop and wait until the OS has recognized and installed the disc again.
  Reboot the laptop!
  Access to the registry editor and select this key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Here, you need to remove the UpperFilter and UpperFilter
  Then reboot again.

  I hope it helps

• Equium A60 does not start after the BIOS update

  I have an Equium A60. After being caught with some very nasty malware and Trojan horse, I had the disiccion to reformat the machine and reinstall the OS.

  Everything goes well until I updated the bios. Machine crashed and now I can't restart. Press the power button and the machine will start for 3-4 seconds and then stops.

  I know it of because of the bios and want to know if there is anything that I can reset this back to the original settings?

  Thanks in advance for your help

  Hello

  Unfortunately, you can not solve a BIOS is broken down by yourself. At the machine really / judgment of accident during the update process? If Yes, then your machine has disappeared and the only chance to bring back to life is to ask an authorized service partner to help you.
  Maybe they have a software to solve these problems. You should try and contact the nearest ASP in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck

• Equium A60: Does not burn the DVD?

  Hi all

  Ive had my phone for almost a year now and for some reason any dvd drive does not burn the DVD, it burns cd perfectly but when it comes to bruning DVD it says that nothing is in the drive...

  Ive tried Philips DVD + RW and DVD + R Sony but still no luck, I know that for some DVDs, you must first delete it, but the drive is not even delete them... On the drive, his engraver of DVD multi and the rewritable clearly marked... so am confused at why his does not work... Ive also tried to use Nero to burn DVDs but no luck

  Any help appreciated thanks

  Ammunition

  Hello

  What s on DVD-R and DVD - RW?
  I also suggest trying different brands of DVD.
  Generally, you will find a list of DVDs and CDs, tested and compatible media in the user manual. Check it out.

• Equium A60 does not work properly with the Logitech Quickcam Fusion

  If someone managed to use a webcam Logitech Quickcam Fusion with an Equium A60?

  I installed the latest available drivers and software and most of the time it screws right up to the operation of the computer. He ends by crashes so bad that I can't recover even using Manager Windows task! If I leave the USB cable connected to the PC, 9 times out of ten, it won't boot into Windows, until I have remove lead :(

  I installed the same software and drivers on my desktop PC and the device works very well every time and the boots OK with the camera connected to a USB port.

  Two computers use Win XP with SP2 and all updates.

  Hello Bill

  Do you have problems with the USB ports if you are using other devices? I really don? t know what can be the problem. Check the Logitech SUPPORT PAGE

  Maybe you'll find some tips there.

• Equium A60 does not recognize the USB webcam

  I just bought a creative vista more webcam and tried to install it on my laptop Equium A60, the software is installed properly and everything but when I connected the webcam to the usb port my laptop didn't recognize it.
  I tried to uninstall and reinstall and nothing has changed. Someone has an idea of what could be bad?

  Hello

  Sometimes USB devices can be recognized correctly because of the low power from USB ports. Usually, USB devices should work with 500mA of power. It is a standard. But sometimes the USB devices need more than only of 500mA. In this case, you can use an external USB hub with external power supply.

  You can also disable the power save option in the device under USB root hub Manager.
  You will find a power management tab. Please enter in this tab and disable the option: allow the computer to turn off this device to save power.

  D this on all the USB root hubs

• Equium A60 does not start correctly

  Hey,.
  I was working on my laptop and it froze, so I restarted, but it froze again.
  When it restarts again the laptop attempted a System Check, but to try to initialize steps 3 > (newspaper?) it happened extremely slow so I restarted it.

  This time, the laptop not boot but produces a blank screen showing:
  "For (x) Realtek RTL8139 810 x PCI Fast Ethernet Controller v 2.13 /8130/ (020326) PXE - E61 Media Test fails, check the cables." PXE-MOF-leave PXE ROM.

  However, when I am sometimes inclined to my laptop, it starts, but slowly?
  I test the University, but I don't understand what to do; I took it to our technicians, and they don't know what to do. Can anyone help please?

  Hello Joseph

  I assume that the HARD drive is at the end of his life. Like written Marina trying to check if you have access to the HARD drive otherwise, I think you need to buy new HARD drive.

  Please let us know if you will find what is the problem.

• This morning update of Firefox has been downloaded but does not restart the laptop. He's trying to start and the lights on the keyboard. He continually tries to restart. The screen is blank. It was working fine until I clicked on restart.

  PC IS A COMPAQ PRESARIO V6000 RUNNING WINDOWS XP

  PC DOES NOT RESTART AFTER THE LAST FIREFOX DOWNLOAD THIS MORNING

  The PC screen does not light and I think he's dead. It can be quite fortuitous, and there may be a hardware failure that he would have stopped working even without the download of firefox. I'll have to consider Repair shop and see if anything can be saved on the hard disk.

  Thanks anyway

  Dave

• El Capitan does not restart while updating

  El Capitan 10.11.3 trying to reboot the system to install 10.11.4. It closes all applications, there is only the trash and Finder icons in the Dock, but nothing happens.

  It is an opportunity to update to OS X without completely reinstalling the system? And why this is happening?

  Hi there bibimij,

  It seems that you install the 10.11.4 updated, but the computer does not restart on its own. There could be several reasons for something like that happening, but I'd first leave applications running when you run the update because there might be an application taking upward. If you are not sure whether or not you have closed them all, you can use Force Quit to quit any programs that may be running.

  Force a nearby application on your Mac.

  If this does not help, then I would then reset your PRAM:

  How to reset the NVRAM on your Mac.

  Test the issue once this has been reset. If she keeps going on although I would then start in safe mode so that some at the system level and hiding the kernel, as well as perform a disk check and repair if necessary.

  Try safe mode if your Mac does not end commissioning

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then exit the safe mode with a normal restart and test once more. Thank you for using communities of Apple Support.

• Satellite Pro A300-15 t does not restart on the current after BIOS update

  Hello

  There is something wrong with my Satellite Pro A300-15 t. I made an update of the BIOS of toshiba recently with the latest Web site and it installed successfully. But after the installation, I noticed that my laptop does not restart when it is connected to the power adapter. It restarts and works perfectly when its power on the battery.

  After restart or start-up the laptop (on battery), it will be well when the adapter is connected.

  But, when I reboot when the adapter is connected, after his stop, just power light turns on for a second or two and gets off automatically. And not even the laptop starts manually by pressing the power button (LCD is turned off when the power light comes on for 2 seconds) when the adapter remains connected.

  So what I do is to pull the plug on the adapter, then start the computer manually by pressing the power button and reconnect the plug of the adapter to the laptop starts. It works well this way. Rest everything works perfectly.

  And this problem started after the update of the BIOS. Now, I don't know how to remedy the situation I don't know if there was a bug in the last update of the bios.

  Details of the update from: http://gulf.computers.toshiba-europe.com/innovation/download_bios.jsp?service=AE

  30/07/08
  Update the BIOS
  This Bios update adds functionality to your system.
  Satellite Pro A300 Toshiba of 3, 60 - WIN

  So please help me to solve the problem.

  Thank you best regards &,.
  Manjit M.

  Hello

  Try to update the BIOS again
  In addition, access the BIOS settings and set the default parameters. Save it and try again.

  Good bye

• R7000 does not restart after hitting the buttons wireless & WPS

  Need help on my r7000. It has been installed and works fine for months but my son hit the WPS Wifi buttons and now it does not restart. I have just the lights power & internet on

  I must say that I am tech challenged & currently without laptop or PC. I think that I installed with a laptop computer and wonder if I need a connection difficult to solve this problem. I have just an iPad & iPhone right now.

  I thought that to reset the router through genius, but it won't let me connect. I was connected to the router with iPhone & I tried iPad too but same result.

  Do I have to restore the settings to factory & b If Yes, can I install without connection to a PC? I have Comcast modem & wifi.

  All hep much appreciated.

  I had to do a hard reset but it worked. Thank you for your advice

  Problem resolved

• Equium A60 do not start

  Hello

  My Equium A60 primer not. Once the power is on, the Toshiba screen after, nothing else happens. The screen shows that the light is on but nothing is displayed. Fans are working and go to market and stop at intervals.

  During the boot and hold down the F8 key, I tried to load safe mode, but the machine stopped by what follows the on-screen...

  multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\system 32\ntoskrnl.exe
  multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\system 32\hal.dll
  multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\system 32\KDCOM. DLL
  multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\system 32\BOOTVID.dll
  multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\system 32\config\system

  Anyone has any ideas on where to find a solution to this. Is it software or hardware releated etc.

  Thanks much for any help.

  Hello!

  In my view, this could be a problem with the drive HARD or Windows.

  First of all, I would like to check the HARD disk:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. You can then the HARD drive.
  On the same site is a user's guide if you want to know more.

  If the HARD drive has no error I would reinstall Windows with the recovery because you disk as no access in safe mode.

  Good bye

• What does not restart in the FFT functions way?

  Hi all

  I would like to know what that "restart average" made for the FFT functions. According to aid,"reboot on average indicates if the VI restarts the process chosen medium." If restart on average is set to TRUE, the restart of the VI the selected with an average of process. If reboot on average is set to FALSE, the VI does not restart the process chosen sprawl. The default value is FALSE. When you call this VI for the first time, the averaging process restarts automatically. A typical case when you need to reboot on average is when a major change of entry occurs in the middle of the averaging process"

  I realized that the FFT function takes in an array of values and perform the FFT on it. If the FFT function keep a buffer previous values and clears when restart average = true? Because the FFT functions are not Point by point and they take both in all the data to deal with, "a major change of entry occurs in the middle of the averaging process" can be true?

  Thank you!

  Sigh.  I really tried to explain what was going on (probably) with this function, you use (and, I thought naively, you understand), but you got me wrong.

  

  This VI creates a zero average noise signal, providing 1024 points per second.  Do you know what should be the power spectrum of the signal?  Due to the randomness of the input signal, the power (for a small finished sample) spectrum will also have a random component.  If you had several ghosts of power on average, the average would begin to converge with the expected for random noise power spectrum.

  If you run this VI and look at the Spectra resulting (on average), you will notice that the first spectrum is the most "spice" and that spectra are averaged, the variation is reduced and diminishes the value of crete (shown by looking at the scale of Amplitude).  At any time, you can press "Reset average" and see this... reset the average, the following spectrum shows the growing nose, etc.

  It shows the right way to test the function of the power spectrum and discover what he does. My suggestion as to what makes this function seems to be largely correct.

  Bob Schor

• USB-6009 DAQmx meter task stops and does not restart when you restart the VI

  I have the task of counter DAQmx which "hangs up" while troubleshooting a VI and does not restart when I restart Traoré.  See attached fragment VI.  The counter works reliably in normal operation, but some combinations of interruption and running "highlighted" causes to stop work.  It's in LabVIEW 2009.

  It will restart if I close the VI and reopen it.  However, this causes losing me my window probe laboriously built with ten

  the probes.

  Is it possible to re - initialize a DAQmx task without closing the VI?

  This significantly slows the troubleshooting.

  As an alternative, if anyone can suggest a way to preserve a probe Watch window after closing of associated VI, it would be a work around.

  Please do not take into account.

  Counteract the work of task - it's the rest of the program which is hung up.