Equium A60 does not start correctly

Similar Questions

• Drive CD/DVD of Equium A60 does not work correctly

  Hello
  I just bought a used Equium A60. The seller reformatted the laptop using the player. However, the player will not play any disc now (I tried the CD, DVD and Toshiba load discs. The Device Manager shows the drive works, but the program tells me to insert a disk. Using advice gleaned on this forum I tried to clean the lens, System Restore, start with the key C pressed, tried F12, downloaded a driver for DVDram drive and finally remove the disk and submit.
  The seller said he always worked well for him and the laptop arrived in perfect condition. All you other ideas?

  Go to Device Manager and remove the CD/DVD drive.
  Then restart the laptop and wait until the OS has recognized and installed the disc again.
  Reboot the laptop!
  Access to the registry editor and select this key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Here, you need to remove the UpperFilter and UpperFilter
  Then reboot again.

  I hope it helps

• Equium A60 does not start after the BIOS update

  I have an Equium A60. After being caught with some very nasty malware and Trojan horse, I had the disiccion to reformat the machine and reinstall the OS.

  Everything goes well until I updated the bios. Machine crashed and now I can't restart. Press the power button and the machine will start for 3-4 seconds and then stops.

  I know it of because of the bios and want to know if there is anything that I can reset this back to the original settings?

  Thanks in advance for your help

  Hello

  Unfortunately, you can not solve a BIOS is broken down by yourself. At the machine really / judgment of accident during the update process? If Yes, then your machine has disappeared and the only chance to bring back to life is to ask an authorized service partner to help you.
  Maybe they have a software to solve these problems. You should try and contact the nearest ASP in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck

• Mac does not start correctly

  Hello, my Imac does not start correctly. When he plays the macsound boots but only half of the load of the boot. Then it restarts.

  What I have done:

  (1) unplug everything and held the power button for 10 seconds.

  (2) held the shift key--> after that I have a few bluish vertical lines

  (3) held cmd + option + P + R-> after I have a few vertical lines bluish, but bigger

  (4) held the c key

  (5) very slow D

  (6) CMD + V-> it's fast to read and to search for errors

  After all these different things, randomly I these bluish vertical lines and sometimes a few flickers on my screen.

  Can someone help me?

  If I need to reinstall I can recover my data?

  I appreciate your help and thanks for your help.

  I solved the problem! I googled a lot and I found that it was the GPU was down. Well, I searched and found the solution...

  I think that apple don't want to hear or see. But if you are a little technical or handyman, Cook your GPU in the oven. Yes, bake your GPU in the oven! See the link: https://www.youtube.com/watch?v=9vPM41ZmLos

  I warn you all, be very patient and very carefully, or you can destroy your beloved mac. The case may go to an apple store workshop.

• My iMac does not start correctly. Instead, I just a gray screen. Safe mode starts, it's ok. No problem. So I ask what next step can I try? Thank you very much

  My iMac does not start correctly. Instead, I have a gray white screen. Safe mode starts, it's ok. No problem. But not in safe mode, only grey screen again.  So I ask what next step can I try? Thank you very much and sorry for my bad English.

  Reinstall El Capitan without erasing the drive

  Make sure that you have a current backup before continuing.

  HD recovery start:

  Restart the computer after the ring, press in and hold the COMMAND and R keys until the menu screen to appear.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

  In the future please post in the appropriate forum. Your question is not related to the developers forum. I will take care of moved it.

• 6 Lightroom does not start correctly

  LIghtroom 6a fonctionnee om my 10 (x 64) of Windows without problem for 6 months. After the installation of a slide (CyberViewX) scanner and a regular update to Win 10 that occurred automatically when closing down the computer, the 6 Lightroom does not start correctly since I restarted the computer. I uninstalled the scanner CyberViewX program and rebooted the computer again. The only thing that happens when you try to open LR6 is a message that an error has occurred when opening the catalog. I do not have a backup catalog, and there is a button where I can choose a different catalog. When you press this button I find the backup catalog, but when I chose this catalogue I go back to the original message and the backup catalog was obviously not chosen. There is a button to create a new catalog as well and when I press this button I just in my photo folder and there seems to be no way to create a catalog or open LR6. This form of dialogue is obviously not working correctly.

  There was a lock by the catalog file, and I deleted this file. I also tried all the tricks LR running as an administrator and assign full privileges for all users of my photo file.

  The only thing I have not tried is to uninstall and reinstall the whole LR6, but I have a lot of photos and work so I hesitate to do this without knowing that it is necessary and if sure that I can get everything back in order with the old catalog and all restored. Anyway to fix corrupted with the installation DVD files?

  What should do? Help!

  Hi bjomb,

  You suggest to choose the option to create a catalog and give it the name once you get the pictures folder window, and then choose create.

  This would create a new catalog.

  check if it opens the new catalog, and it passes under the background processes in the Task Manager.

  If it does not, then you need to reinstall Lightroom program and it would not affect your changes as changes are stored in the catalogues and catalogues remain it is same when the resettlement.

  Kind regards

  Claes

• Satellite Pro A60 - does not start

  My A60 will not start. The power supply is plugged with a green light on the power supply and the A60. The battery is full (light began in orange and is now green). Nothing happens when you press the power button.

  Tried to take the battery out and running on AC, but no change.

  Any ideas?

  Thank you
  L

  HI Laurent,.

  Try to remove the battery and also diconnecting the AC power for a few minutes. Then re-install the battery and try to turn on the unit. If this does not work, then remove the battery and plug in the AC power. Again try to power on the device.

  If none of the above works then you will need to refer to a Service partner authorized to have the laptop checked.

  Kind regards

• Satellite U300 - Windows does not start correctly

  My U300 Vista Home run came in a boot loop: Windows can not start correctly and makes me want to use repair system, which failed and just makes me want to stop the computer again.

  I've tried without success, but failure mode it no more. I have a product recovery CD, but the system does not start from him. When I studied at the start, I saw that the BIOS does not detect the optical drive.

  Help please! Thank you.

  Hi nonprofit.

  You could try to load the default settings in the BIOS. Maybe it will be reconigze the CD/DVD drive again.

  Otherwise I think that it of necessary to replace the defective drive. Then, you would be able to use the Toshiba recovery disc again. This will restore factory in a few minutes.

• Satellite C650 - Windows does not start correctly

  I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

  Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

  Hey Buddy,

  You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

  If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.

• Satellite Pro L850-1DW does not start correctly

  Hello

  I have a client who has a L850-1DW / PSKDHE-00E005EN laptop.

  She keeps pointing out that the computer does not start successfully from the cold.
  She argues that the question arises mainly when the battery starts but sometimes when it is plugged into the mains.
  I can see where point of newspapers that BSOD were registered at the start and that, on more than one occasion, his computer was recovered from a restore of Windows. He has also recovered factory once too.

  Although I've seen the consequences of these issues of "start-up" I have yet to experience first hand with the device.

  I noticed yesterday that the BIOS is outdated (as I had an alert Tempro).
  I upgraded from 1.6 to 6.50. Yet once, I didn't have problems.
  I can't find the release notes for the BIOS so I don't know if this is a known problem that has been fixed.
  I don't know if this "intermittent" defect is just that or if the user has the power button down too hard or for too long and in fact inadvertently crashing NB itself.

  Any suggestion is welcome.

  Otherwise, I guess I have to connect a call with Toshiba.

  On this virtual path, it is not easy to say what the problem is here. In my opinion, you should ask your client if you can make the data backup and install original recovery image. To my laptop computer reviews must be tested with the settings without installation of additional software.

  > I don't know if this "intermittent" defect is just that or if the user has the power button down too hard or for too long and in fact inadvertently crashing NB itself.
  Who knows? Ask your client and show how to start the laptop by pressing the button walk / stop. It must be done slowly and for only one second.

• Equium A60 do not start

  Hello

  My Equium A60 primer not. Once the power is on, the Toshiba screen after, nothing else happens. The screen shows that the light is on but nothing is displayed. Fans are working and go to market and stop at intervals.

  During the boot and hold down the F8 key, I tried to load safe mode, but the machine stopped by what follows the on-screen...

  multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\system 32\ntoskrnl.exe
  multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\system 32\hal.dll
  multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\system 32\KDCOM. DLL
  multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\system 32\BOOTVID.dll
  multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\system 32\config\system

  Anyone has any ideas on where to find a solution to this. Is it software or hardware releated etc.

  Thanks much for any help.

  Hello!

  In my view, this could be a problem with the drive HARD or Windows.

  First of all, I would like to check the HARD disk:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. You can then the HARD drive.
  On the same site is a user's guide if you want to know more.

  If the HARD drive has no error I would reinstall Windows with the recovery because you disk as no access in safe mode.

  Good bye

• InDesign CS5 does not start correctly

  My Indesign CS5 does not start.

  I don't see the program to start, but if I go to the "active processes management" I can see it running.

  Thus, the program starts, but I don't see its interface.

  My OS is W7 professional.

  This problem affects me for a week.

  I tried to uninstall and reinstall without results.

  PS. I have a Premium Suite CS5, and other programs works fine.

  Thanks for the support

  Ciao, Peter,.

  Finally I got it! The problem was on the ID fields, where to load the application.

  I have two monitor, managed by the nView Desktop Manager. So ID has been busy away from my office, I know not why.

  But strangest of all, ID no was not shown in the application tab in the 'management of active processes.

  So I disabled the Manager the nview and ID appear.

  But it is a big bug ID, which Adobe has to manage.

  Thank you very much for your help.

  Ciao, Luca

• Equium A60 will not start

  Hi, I am despartely needing help with my A60 equium that won't start. When you turn the button lights up, fan and starting, but then in a few seconds the cutting power. I tried different sources of energy, also just by using ac power and battery just all produce the same results. I had installed a memory chip a few months back and thought it might be that, but when I took it off the laptop has always been the problem.

  Is there that anyone may be able to help me with this problem? Thank you

  TAF

  Hi Michael,

  The first thing that happens when your, press on the power button on your laptop, it's that the CMOS chip (which contains your BIOS) through a pre-deignated POST (Power On Self Test) process that verifies the functions of the material of base components after what the BIOS will be charged which will lead in turn to the operating system itself being started.

  If a failure or a problem occurs during POST and then power on the sequence stops (usually after a series of beeps are emitted that are coded to help the diagnostic process. The actual beep codes are specific to the manufacturer of the CMOS/BIOS chip.

  If you receive no all audible sounds, then it is likely that the problem is very early in the POST process and may indicate a problem with your main card or your electronic internal.

  You can try to remove and and reinstall devices such as RAM memory modules, hard drive, optical drive, etc to see if this corrects the situation, but if not then you will need to take the device to authorized, Service partner who has the diagnostic equipment needed to perform accurate control.

  Kind regards

• Equium A60 does not recognize the DVD ROM

  I am trying to use the product recovery dvd - rom on my Equium A60 and found that the reader not recoginse not the disc. I tried DVD movies, audio CD and other disks installion and all work well and the recovery disc is recognized on the other 2 computers I tried it on if the drive is not damaged.

  I've also tried uninstalled the driver and restart the computer, so the driver reinstalled, this allowed the disk to read once, but when I rebooted the computer run really drive it is came with the same messages "not found no bootable disk" he was not able to read again since.

  Can anyone help?

  Hold on! Have you tried to boot from the recovery DVD or have you tried to boot under Windows OS?

  I put t know exactly what could be wrong but sometimes a lens player could malfunction and could not calibrate correctly. In this case some mediums are not readable.

• Equium A60 does not restart

  Hello

  My Equium A60 which I had since almost two years earlier this week crashed and does not restart. I met previous problems of slowness and the computer laptop closing (which I believe was down to heat), but it's much more serious.

  All that happens when I pass on is a black screen is displayed, as if the monitor does not work, and then after a few minutes it turns off, there is nothing really to go. Is there anyway I can record what's on my hard drive or who lost? Any help would be appreciated.

  Thank you

  You can try to connect the HARD drive to another laptop or desktop as an external device using the USB HDD box. The disc HARD should be recognized automatically and you can copy all of your files.

  Of course, this is possible if the HARD drive is not defective. I did several times with my old Satellite 1900 HDD. No problem at all.

  On your device, I can tell you just follow: after pressing the power button / stop if there is no activity (HDD led, display, the cooling fan noise) I guess the unit must be controlled by the service.