Equium A60: DVD - RAM, being not recognized correctly

Hiya!

I have an EA60 and my carpet * a DVD-RAM UJ-820 s is currently not recognized by the laptop properly. When I go to device drivers, he said the driver has been loaded but returns the error code 41. I reloaded the Driver and the device, and it makes no difference.

I also bought a new Pioneer DVD-RAM and it comes up with the same error code.

Can someone help me please?

[email protected]

Kind regards

Gary

To start the registry editor
Click Start, run, type regedit, and then click OK. Start the registry editor.

Then follows the steps described above.

Tags: Toshiba

Similar Questions

  • Re: Equium A60: DVD drive is not recognized - error code 39

    Hello

    My Equium A60 works very well for 4 years now.
    Lately the DVD ramis playing about and finally today there disappear form the drive list altogether.
    I uninstall the drive and install it again, but there is no difference.

    Windows gives me this message:
    + Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) +.

    could someone help me please!

    Thank you

    This issue has been described a lot of time here in the forum:
    Please check these discussions:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=129807&

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=106314𙽊

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=107214𚋎

  • Tecra M5 - DVD - Ram is not recognized

    Hello

    This is my 1st post, so this is.
    I have a Toshiba Tecra M5 my old drive has just started to slow down, I bought a new drive Tsstcorp SN-S082H/baby.

    When I slot the drive in the Bay is not recognized by the system immediately unless I'm going to add harware and ASNA for new hardware, and then he picks it up,.
    When stop & restart lappy dvd - ram is not recognized by the system, or BIOS, the light on the flange of the discs is on but when I press the button open nothing happens. I installed the latest firmware, I also don't you any driver of indevice error messages sound as if the reader is not installed, but the light on the drive is turned on but does not open.

    Some1 can help me please?

    Model name: SN-S082H/baby
    Code OEM: TS
    F/W ver. SB01

    Follow the instructions posted by Akuma. Maybe this can solve the problem.

    Also, I checked the Tecra M5 user manual. There is a list with compatible DVD players, and your new drive is not listed. Not every drive is compatible with any laptop.
    If it doesn t work get the reader to the merchant computer buy a compatible player that is listed in the user manual:

    TEAC CD-224EN
    TEAC DV-28EN
    CCP UJDA770
    TSST TS-L462C
    Pioneer DVR - K16
    CCP UJ-841

  • Re: CD/DVD drive is not recognized correctly on my Equium P200

    I recently bought a laptop P200D and now, I found that the CD/DVD drive is not recognized.

    In Device Manager the drive icon has a yellow on exclamation and in the wealthy area it says "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    I tried uninstalling the drive and then to restart the laptop but it is has not been successful. I recently downloaded and installed the Service Pack 1 for Vista and I have read that there have been problems with device drivers and wonder if there is such a body?

    Are there updated drivers available for this device?

    Thanks for any help you can give.

    Lester Mortimore

    Hello

    Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=113742 please

    I hope this will help you.

  • DVD player is not recognized correctly - Equium L100

    Can help any 1 Please my DVD - RW is not recognized in my system. Sometimes I boot and it is there, but other times I start up and it is not shown in my computer or Device Manager

    Seriously frustrated.

    Hello

    Please try this http://support.microsoft.com/kb/314060/en-us

    Is the DVD drive in the device with the yellow exclamation point Manager?

  • Equium A60 - DVD player does not read the data disks

    Hello

    I'm having a problem with my DVD drive on my laptop Toshiba Equium A60. The DVD drive (Pioneer DVD - RW DVR-K13A) will play store bought movies etc. without problem. He will also read a blank DVD when you put it in the drive, but once the information/data are on the disc, it won t detect the drive.

    I'm not really good with computer so any help would be grateful. The computer used for any play he stopped just do a few months back.

    Many thanks, Phil

    Hello Phil

    It is not easy to find explanations for these issues. What you can try is to create own data CD and check if the drive can read. I recommend buying a blank DVD-R from TDK. Over the past 7 years I never had no problem read/write TDK media.

    Media that cannot be read properly? Is - this DVD-R, DVD - RW, DVD + R or a DVD + RW?
    Please give us more information.

  • Connected to the Portege 3500 USB DVD burner is not recognized correctly

    I am trying to connect a burner DVD HP DVDv 940th my 3500.When Portege I plug in the device, it is not recognized and the Device Manager list as a storage of unknown mass without a driver. Where can I get this driver?

    Hello

    Try to check the assumption of the manufacturer or the download page. Manufacturers of portable gift use support external devices t produced by other companies.

  • Satellite Pro 6050: DVD player is not recognized correctly

    The guide shows the Toshiba SD-R2102 as one of the internal drives for machine of HRT (supplied with the CD-ROM). So I bought one. Running XP and when I install the hardware is not recognized at boot, or in Device Manager. Looked at the site to support my BIOS is the last and can find no driver there or on my tools disk.

    Can someone point me in the right direction?

    Hello

    As far as I know your device has a Slim select Bay. If the drive is not in a good position and there is no proper contact of the reader doesn t exist for the system. Please check if the disc is in the correct position. If you put it inside at the end to do a click. After that, the reader is correctly positioned.

    Good bye

  • CD/DVD drive is not recognized on Satellite Pro L10

    Hello. can someone help me with the following: -.

    My DVD drive is not recognized on my computer and in the material properties, it says that my CDW/DVD driver may be damaged and needs re-setup or "updated".

    the (r) drive is shown as TSST Corp TS-L462A - can I get the update
    Download Driver from the site? (is it free?)

    Thanks for any help

    Paul

    Hi Paul,.

    You don't say what model of laptop you have, but generally speaking if you are using Windows XP then you will use the standard Microsoft drivers for your scanner.

    However, you can Toshiba drivers and utilities download from Toshiba web site by clicking on the Support section and downloads and selection of files to download. You will need to fill in the details of your laptop so that the list of appropriate driver (unless you have provided these details when you register).

    Kind regards

  • Satellite L30 PSL33E: After downgrading to XP DVD-RAM does not burn

    My laptop (Toshiba Satellite L30 PSL33E) provided with Windows Vista but it is very slow with this OS and one of my friends downgrade my OS XP.
    But now my DVD-RAM does not burn!

    Install the driver DVD - RAM Toshiba v the European driver Toshiba page 5.0.2.5

  • DVD rw is not recognized as writable.

    DVD rw is not recognized as writable. Difficulty of MS used. Did not work. installed a new drive. still not recognized. any other ideas?

    Hi jp1681,

    ·         This fixit did you use?

    ·         The drive to read but not write disks?

    Method 1: We will uninstall the DVD drive in Device Manager and reinstall.

    a. click the Start button and then right click on my computer. Click on properties.

    b. click on the Hardware tab, and then click Device Manager.

    c. now, expand the CD-ROM/DVD-ROM drives, click with the right button on the CD-ROM/DVD-ROM drive and click on uninstall.

    d. restart the computer.

    Method 2: Log on to the manufacturer of the DVD drive and install the latest updates from driver\firmware.

    Method 3: If you are not able to read any DVD, check if you have followed the article mentioned below.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

  • CD/DVD drive is not recognized by Windows or other programs. HP Pavilion s7310n Slimline PC

    He used to work. It comes from when the computer was around the age of 4 months. should have put in, but could not take the days off to bring it back to BEST BUY - 2 years ago.

    Then... the CD/DVD drive is not recognized by Windows or other programs. If I insert a CD as Photo Suite III or any what CD/DVD, the green light comes on but no rotation and not even a warning to error.

    Now what? How can I find out / know the specs of what to look for a replacement/new one... I lost the book in my move to Florida. I have tried all sorts of key word in GOOGLE and I am half blind and tired to be re-directed to sites that have nothing to do with my question.

    Can someone help me please? Thank you. TJ Rev.

    PS... None of the links in the Solution of Sissy2 DIFFICULTY to where they are supposed to. I don't think it's my problem anyway.

    MY CD/DVD drive is dead.

    Message edited by aalienlady on 05/21/2009 21:32
    Message edited by aalienlady on 05/21/2009 21:32

     Download XP_CD-DVD - Fix.zip and save this file on your hard drive. Navigate to where you saved it, and double-click the file to extract the content. Find the EXE file that you extracted and double click it.  A confirmation dialog box appears when the script is done.  You may need to reboot for the change to take effect.

    Works on XP and Vista. Good luck!

  • DVD RAM does not

    HP DVDRAM GT10L ATA stopped working. Device manager shows yellow mark. in the properties shows device can not start (error code 10). Uninstall and reinstall the drivers moved. Help, please.

    Thanks, Niranjan, I already did, uninstall, then by restarting computer, but at the start it starts the installation of the driver and is unable to do so. in Device Manager, it says device cannot start (error code 10). Thank you

    Hello

    Thank you for visiting Microsoft Community.

    According to the description, I understand that you are facing problems with your DVD ROM. I will certainly help you to question.

    As you have already tried suggestions provided by Niranjan, I suggest you check out the link below:

    https://support.Microsoft.com/en-us/KB/943104

    You can also check out the link below:

    Your CD-ROM or DVD drive is not recognized by Windows or other programs

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    Hope this information helps.

    Meet us with the State of the question.

  • Error message: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete" and DVD disc is not recognized.

    Original title: My DVD drive is not recognized, it works physicaly works fine, but the pc does not even detect it exists.

    The error that says: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

    I did a backup and restored my system to the factory settings. After doing this still dvd was not recognized. I don't know what to do, my computer is new and Security told me that they will restore the pc and try to fix it, I can't risk my documents of the University are the same that has not worked for me before.
    Could someone help me?
    -The pilot is the last in line.
    -The works of reader dvd but the computer is not reading it, it does not even appear on the section 'computer '.
    -J' tried to use a "fix - it" on Microsoft online, but it doesn't work anymore.
    -My OS is Windows 7.
    -A restore factory settings did not work at all.
    Thank you.
    Claudio Nahmad
    Mexico City

    Hi, Claudio Nahmad,.

    This error can occur if the data in the registry for the device and its driver has been corrupted.

    Since you have already done a factory restore, leave, try to uninstall and reinstall the driver CD\DVD and check if it helps.
    Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

    We can also refer to article and check if it helps.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    Important: The above links contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    For more information, you can view the article:

    Back up the registry

    You can also try to install Windows updates, including optional updates driver and check if that helps.

    Install Windows updates in Windows 7

    Hope the helps of information.

  • Being not recognized in dimension 8400 DVD drive

    Hi all

    I have a problem with my DVD drive in my dimension 8400 (about 3 years)

    I can open the DVD player and insert DVD/CD but they are not recognized,

    My computer is not present DVD player, there is no CD/DVD players present also in the management of devices.

    I think the DVD player I have is the Philips DVD 8601 HH 16 x DVD + RW,

    I had a similar problem about 1 year ago, but that has been fixed by updating the firmware/drivers. (although the DVD player doesn't "disappear" from my computer, it comes to refuse to play the disc at the time)

    Im not a computer newbie, so I tried several things to try to make it work:

    http://www.dellcommunity.com/supportforums/board/message?board.ID=dim_cdrom&message.ID=138730&query.ID=270189#M138730 I did steps 1-3 and 5, and nothing has worked.

    Someone at - recommended step 4 too? Question about step 4: you have to clear the CMOS chip memory AND reset the default settings of the BIOS Setup? It was not clear from the guide on this forum.

    I tried to download the updates of the Firmware, but when I tried to update it says "Device not found", logic, because the device is not - where on my computer.

    That's my problem.

    Thank you very much if anyone can help me

    Perhaps the DVD player is just broken and I need to get a new one, but the fact that I can open and close the lid and the light Burns gives me hope that its stil alive: P

    Concerning

    Rowan Schaap


Maybe you are looking for