Equium A60 - error caused by the RAM problem - Windows tool does not work!

Similar Questions

• Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

  The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

  When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  Additional resources:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

• Reformat and re-install XP SP2 but now struggling with the updates. Windows Update does not work. Loading SP3 will fix this?

  After repeated BSOD (FLTMGR_FILE_System 0x000000F5, 0 x 00000066, etc.) errors usually 7 to 8 minutes after the start, I reformatted the drive C: and re-installed XP SP2.  But since then, I had a very hard time updated.  I even got again the WORC and had to go back to a previous restore point after installing IE8.

  Windows Update does not work.

  [Error number: 0x8024400A] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues

  Hello.

  Try the suggestions on this site:

  http://support.Microsoft.com/kb/836941

• My Windows Media Player does not open upward when you click it in the list of available programs, nor will any media over the internet using Windows Media does not work

  My Windows Media does not open upward, when you click on Window Media Player in the list of available programs nor play any internet media using the Media window. I have the 110.6002.18311 version. Any help to fix this problem will be appreciated.

  Hello

  You can try to re register the dll files for windows media player and if it helps fix your problem. To do this, please follow the steps below:
  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. At the command prompt, type the following commands and press ENTER after each command:
  regsvr32 vbscript.dll
  regsvr32 jscript.dll
  regsvr32 wmp.dll

• the spot Healing Brush tool does not work?

  PS 2015.0.1 - IMAC OS X 10.11.1 spot healing brush does not work. all I get is a bunch of distortion.

  Try to reset the tool:

  

• Follow this procedure when the Sansa Connect recovery tool does not work!

  Hey people;

  This thread is just to consolidate the info from a lot a longer wire, earlier.

  Currently, the Sansa Connect recovery tool may or may not work for you.  You can see an error like 'failed to connect to the Internet' or "cannot retrieve the device, SanDisk contact technical support for assistance."  If Yes, it's probably because the recovery tool is unable to download the firmware images he needs zing.net.  SanDisk has not (yet) recognized this problem.  The strange thing is that * sometimes * recovery tool works, if you already have images of the firmware on the drive... but usually it doesn't.

  So here's what you do (with thanks to Larlos for providing the firmware images and order lines to their installation).  This assumes that you're 'stuck' to the "necessary recovery" post on your connection.  If not and you are in the regular menu of Sansa Connect, first follow steps 2 and 3 in this paper: http://mp3support.sandisk.com/tools/connect-recovery-instructions.pdf, do the following:

  (1) download the zip file containing the images of the http://www.megaupload.com/?d=UNLDGZ1N firmware

  (2) search for the following files in the zip file, and then copy them into the directory of your drive "C:\Program Updater Connect Device Recovery\cmdline":

  • everest_initrd_ext_prod_1.1.1.50239.SRR.e
  • everest_vmlinux_ext_prod_1.1.1.50239.SRR.e
  • yeverest_zap_ota_rel_1.1.2.65799.tar.gz.e
  • yeverest_zap_ota_rel_ext_prod_1.1.2.65799.SIG

  (3) in the same directory, create a file named recovery.bat that contains the following three lines:

  zsi_fw.exe w everest_vmlinux_ext_prod_1.1.1.50239.srr.e everest_initrd_ext_prod_1.1.1.50239.srr.e

  zaprecover.exe t 600000 f yeverest_zap_ota_rel_1.1.2.65799.tar.gz.e yeverest_zap_ota_rel_ext_prod_1.1.2.65799.sig

  pause

  (4) connect your Sansa Connect USB.

  (5) run the recovery.bat file (double-click it in Windows Explorer, or run from a DOS command prompt).  The line of 'pause' is there only so you can see the results of running if you run it from Windows Explorer.  Expect the recovery to the end; at the end of that your connection will restart.  If Windows displays the hardware wizard detected during this process, simply cancel the wizard.

  whturner wrote:

  Thanks for the help - it updated my white box to connect to the WiFi and after registration on Yahoo (without choosing any service, just updated my old email and user ID) I now INet radio with a number of stations that work fine on my home wireless network. To do this, DND to explore and syncs with WMP OK. A few quirks that I wonder about.        (1) after the firmware update, my ZAP showed that 1.2.0.58335r and OS = 1.2.0.58835 - NOW (the next day), it changed to ZAP = 1.1.2.65799r and 1.1.1.50239 = OS. Every thing seems to work even though; I have a firmware download while I was playing with the INet radio?     2) there is also a new menu item "Server Zing" that lists the name of the module, the version, and the primary and secondary server. Is this normal?  (3) what Yahoo service I - I see a small Y! symbol at the top right of the screen.                                                                                                                                               Thank you very much and congratulations Warren

  (1) no; you see the version numbers are associated with the files of the firmware (names starting with "everest" and "yeverest" files) that you have either downloaded when you ran the recovery tool, or download in megaupload.com zip file.

  (2) Yes, it's normal.  Zing is the company that allows you to manage authentication of audio stream and firmware for the connection.

  (3) the Y! symbol indicates just that when you use the Internet Radio feature, you are streaming audio of Yahoo (in fact, now owned by CBS Radio).  There is also a function of Flickr photos, which is associated with Yahoo.

• I hae a Trogan Virus to also keep a large number of viruses, too... from Windows Security Alert. The Microsoft malicious software tool does not work on Vista 64. I need another product.

  I wouldn't not viruses. I ran scans all time th. My Windows Security Alert was for a few hours and I can't ge to do anything. He keeps asking me to run the installation and then refuses, saying that all ready I have. I ran about three virs scan as this has been posted yet and I didn't have a virus. He said that maybe it's a thing.

  I tried to run th malicious Malware tool, just in case the virus were real, but he came upward and sad for a Vista 64 bit it was not compatible and I need another product. Is this one?

  E-mail address is removed from the privacy *.

  Judging strictly from your post it looks like you have too many malware scanners installed which can decrease your overall protection in the end.

  No matter what scanners you used, please follow the instructions below. Reply back with the results and include a list of all malware/antivirus scanners software that are currently installed on your computer.

  Restart the computer in Safe Mode with network. Click HERE. Download Malwarebytes. Update Malwarebytes and perform a scan.  Choose whether to remove anything found. Once completed click HERE and download Superantispyware Portable. Perform a quick scan again remove anything found.

• Update of Windows XP does not work, error 0 x 80245003. Cannot be updated to SP 3, can't update IE 6 to IE 8. How to solve these problems?

  Update of Windows XP does not work. I tried the correction of the error 0 x 80245003 and nothing has changed. Fix, that it won't work because SP 3 is not installed, because of the Windows Update does not. I try to install SP 3 manually, then downloader windows will not install reference SP 2 must be installed. SP 2 is installed. So I tried several ways to solve this problem, and I keep running into roadblocks of Windows. Help, please.

  Hi my NameJoel,

  See the methods mentioned below and check if that helps.
   
  Method 1:
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Note: A firewall is software or hardware that checks information coming from the Internet or a network. Then the firewalleither blocks information or allows information to pass to your computer. If the information is blocked or throughdepends spent on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP Service Pack 2 (SP2) and Windows XP Service Pack 3 (SP3) include firewall software.
   
  See also:
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144
   
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
  Note: Disable your antivirus software is not usually recommended, some software antivirus prevents certain system changing files. This can cause the Windows XP SP3 installation failure. To make sure that you manage to install Windows XP SP3, temporarily disable your antivirus software, including any third-party antispyware and firewall program. To do this, right-click on the icon for your antivirus program, and then click on disable. The antivirus program icon typically appears in the bottom right corner of the computer screen.
   
  Important: Make sure that you enable the antivirus software after you install Windows XP SP3.
   
  Hope this information helps.

• iTunes won't uninstall on my XP Professional version 2002. I get an error message that says that the Windows Installer does not work.

  Original title: itunes won't uninstall on my XP Professional version 2002.

  iTunes won't uninstall on my XP Professional version 2002.  I tried to delete all files from apple and it will let me delete the Apple software update.  I get an error MOUSSOKI that says that Windows Setup does not work.  What should I do?

  Hello

  Run the tool fixit in the following article and check:

  Diagnose and solve the program installation and uninstallation problems automatically

• Error updating Windows 10: does not work if the PC is joined to the domain

  My company requires that employees upgrade to Windows 10 before the deadline. When I went to install Windows 10 came an error message that says "Windows 10 does not work on this PC" and then told the user account: this PC is connected to a domain. Contact your system administrator

  Does anyone have an idea how to get around this problem? At least 2 other people in our office have successfully upgraded to Windows 10 without feeling it, and another co-worker gets the same error message.

  This is a screenshot of what happens:

  

  Your best option is to download the ISO and upgrade to a Local account.

  Step 1: How to download official Windows 10 ISO files

  Step 2: how: upgrade from previous versions of Windows using the file ISO for Windows 10

• problem with the mouse and keyboard and windows update does not work

  Since last week to start the computer, I get an error message that the mouse and keyboard functions do not work. He then seeks the errors and then indicates that the service restarts. I want to fix this problem and according to Microsoft hardware, I should download "mkc.msi", which is missing from my computer, but when I do a search for a download, it always automatically directs me to the section "community". How can I correct this problem and get the appropriate download? I use Windows Pro 64 bit with IE 11 on an Acer laptop. I have the Acer site but it was a great help. Also, for the last 6 months, I could not update my computer windows update feature does not work and no error code is presented. I tried everything to restore or re-download the windows update feature, but nothing works, or I can't find a source. I got a blue screen 3 times indicating that windows must be updated and has been the reason for the blue screen. Unfortunately, I don't have a Windows 7 reinstall drive when restarting it spilled about 85 MG of data but not identify what has been dumped. Of course I could use help on this major problem as well even if it cannot be in the category correct community.

  Hello

  I understand that you are having trouble downloading MKC. MSI. I would certainly help you to fix this problem.

  Method 1:

  If you are referring to Microsoft Mouse and keyboard Center, then check out these links to download.

  Download mouse and keyboard Center to get the best out of Windows 8

  Mouse and keyboard Center 2.0 (formerly IntelliPoint and IntelliType Pro)

  Method 2:

  You can consult the following Microsoft article if you are unable to install the updates of Windows on the computer.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

  Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  Which edition of Windows 7 is installed on the machine?

  Which edition of Windows 7 you are trying to do an Express upgrade to?

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

  ---------------------

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Error, "the upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade." Enter a different upgrade key. "When you try to upgrade to Windows 7 Ultimate

  I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.

  However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
  "The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  What should I do?

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Windows Live does not work on my laptop! Data execution prevention cause problem

  orgianlt title: Windows Live does not work on my laptop!

  Hello!

  Windows Live will not work on my laptop, data execution prevention is a problem, but how can I solve it?  It doesn't let me change the DEP settings as it says not allowed.  He did run when I first got my laptop but have had to reset the laptop to factory default, everything else works very well except windows live, it is recommended to find a user-friendly version of the DEP, when I go through solutions but don't really understand DEP.

  Thank you

  Trisha

  Hello

  If the question is limited to Windows Live you can post the question in the Windows Live forum for better support.

  http://windowslivehelp.com/

• If I start Photoshop I get 3 error messages: 1. FastCore-Routinen-Modul 2. MMXCore-Routinen-Modul 3. Mehrprozessorunterstutzungs-Modul could not be loaded because the tool does not work with this version of Photoshop.

  FastCore-Routinen-Modul could not be loaded because the tools does not work with this version of Photoshop.

  The MMXCore Routinen module could not be loaded because the tool does not work with this version of Photoshop.

  The Mehrprozessorunterstutzungs module could not be loaded because the tool does not work with this version of Photoshop.

  Hi zimlo,

  Please check the below link which may help you:

  https://helpx.Adobe.com/Photoshop/KB/error-could-load-fastcore-multiprocessor.html

  Concerning

  Sarika