Equium A60 freezes when I insert a disc into the CD-ROM drive

Hello

I have a problem with my CD drive - whenever I put a disc in it freezes the computer laptop everything! I can't do anything that even the mouse pointer hangs on the page.

I have to close the whole pc and start again - what is happening again and again, but he will accept the disk of 1 to 10 times. The drive itself emits many noises whirring etc...

Help!

Rachael

Hello

My brother had the same problem with the laptop (not Toshiba).
The whole operating system froze after the insertion of a disk of some. I put t remember if it was a DVD or CD.
However, nothing works after a long investigation, I gave up and installed a new Windows OS.
This helped and since the new installation of the OS, everything works.

But this does not mean that this will help settle the question about the machine you!
Maybe you drive malfunctions and must be replaced

Tags: Toshiba

Similar Questions

  • Even after inserting a disc in the CD/DVD drive, my computer asks once again for a disc in the drive. "Please insert a disk into drive E".

    All of a sudden my computer asks 'for a disc in the drive. Please insert a disk into drive E ". I put an and closed several times and it says all right, then it is said again and again the same message. ?? Help

    Original title: disc E

    Hello

    Thanks a lot for posting your request on this forum. You have reached the right place, and I'll do my best to help you with this question.

    It would be awesome if you can explain this problem with greater clarity. Please provide the following information to help you better with this problem.

    (1) Windows operating system you are using on the computer?

    (2) what exactly you are trying to do on the computer? You try to install games and Applications using the installation CD/DVD?

    (3) what is the exact full error message you get?

    (4) when exactly you get this error message? It's when you try to start the computer?

    (5) are you can play any CD/DVD using the CD/DVD drive on the computer?

    (6) what are the recent changes that you made to your computer before this problem?

    Please get back to us with all the relevant information about this question for assistance. You can see the article below, so that it would be helpful for you to include all the required information.

    Suggestions for a question on the help forums

    Hope it will be useful.

  • Error - Please insert a disc into the drive trying to open & H R Block at home software CD.

    Original title: XP will not launch my H & R Block at home software CD.

    I bought the & H R Block at home tax software to target and Windows XP will not launch the CD in a CD/DVD players.  I tried manually running the software, but whenever I get the response "Please insert a disk in the drive", even if the disk is in the drive.  I tried other CD and they work all including the H & R Block CD provided in the mail.  Any suggestions for ways I can manually launch the CD ROM?  I returned to the store and exchanged, and the second CD did the same thing.

    Hi AALLIS,

    You did it all change hardware or software on your machine before this problem?

    You can follow this link & check if it helps.

    How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

    Hope the helps of information.

    Please post back and we do know.

  • DVD + RW disc in the DVD - Rom drive

    I have a Toshiba SD-M1222 DVD - ROM drive. I recently bought a new machine DVD + RW internal separate.
    Discs recorded on DVD + RW not reading no problem in my other internal DVD players, but when I try to play them on my DVD-Rom on the PC, I get a message "disc not recognized", even though I have set up the record to be compatible with other players.
    Is there a way I can get the DVD + RW discs to play on this DVD - Rom drive?

    Hello

    Sorry but there is no way to change this. These are two different formats. I have the same situation with my Satellite.

    If you want to have more information about DVD formats google everywhere.

    Good bye

  • error message: there is no disc in the drive, please insert a disc into the drive.

    This happened today after that I used my USB and now I cantget get rid of this error code I click Cancel and it just keeps popping up! its so annoying, please help I would really appreciate it! thaks

    Hello laladjmom23,

    1. do you insert any removable drive to your computer before having this problem?

    I suggest that you follow the section below to resolve this issue:

    http://support.Microsoft.com/kb/330137

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Insert a disc in the drive \Device\Harddisk3\DR3?

    have a vi with sub about 20 screws in his .llb that makes a fair bit of the interaction of the data base and data acquisition.

    When it comes to 'entries preparation' sub vi in State "expt prep", if she is not simply close labview entirely, it gives 10 'Please insert a disc into the drive \Device\Harddisk3\DR3' errors in a row, then ends.  in fact some of the 10 are asking Harddisk4\DR4, but I still don't know what he's talking about.

    very mysterious, that is if I delete as void / vi and replace it with artificial constants, it does the same thing.  I use breakpoints, step over and highlight the execution and cannot see what is causing the error, it's like there is a short circuit in the wiring itself (!).

    was blocked for a day now.  thoughts?  tried to cut and paste the entire block diagram in a soft vi, labview opening/closing, restart, reinstall LV (2011 sp1) and daqmx 9.5.1 no effect.

    code attached

    new data - copy & paste the contents of the sub-vis & vi new screw do not affect not error, gutting all error DAQ hardware program priest DOES.  Board of Directors is a NI PCIe 6363.

  • Winlogon.exe guard popping up saying 'No disc' there is no disk in the drive. Insert a disc into drive K

    Winlogon.exe guard popping up saying 'No disc' there is no disk in the drive. Insert a disc into drive K. I won't record anything. It keeps popping up when I want to stop and he let me close. And it won't go away. I tried the Task Manager, and who is unable to complete the task. I went to his file and tried to delete, but it's not going to get out me of my PC

    Hello

    1. what version of operating system you are using?
    2. did you of recent changes on your system prior to this problem?
    3. when, exactly, you get this error message?

    You can try the steps mentioned below and check if it helps to solve the problem.

    Method 1: Scan your computer anti-virus using the Microsoft Safety Scanner.

    Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

    Method 2: Try to boot in safe mode and check if the same problem occurs.

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

     

    Method 3: If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

     

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Hope this information is useful.

  • floppy drive please insert a disc into drive error message A

    I TRIED 2 NEW FLOPPY DRIVES, AND EACH OF THEM GIVES AN ERROR MESSAGE THAT SAYS: S ' PLEASE INSERT A DISC IN THE DRIVE A.I DID A LOT OF CONTROLS AND I TRIED A LOT OF THINGS TO DO FLOPPY WORK.IT SAYS IN DEVICE MANAGER THAT THIS DEVICE IS WORKING PROPERLY. CABLES ARE NOT GOOD, OR IS IT A PROBLEM WITH XP? ARE MY BACKWORD CABLES, OR THE TWO DISCS ARE DEFECTIVE? IT WILL NOT READ OR WRITE. WHAT CAN I DO ELSE? IT SHOWS ON MY COMPUTER WHERE IT EXISTS AS A PLAYER A. I CAN FORGET ABOUT FLOPPY DRIVES IF I CAN'T GET AN ANSWER TO THIS PROBLEM. I ALSO READ THAT IT IS NORMAL FOR THE FLOPPY DRIVE, DO NOT SHOW ON THE SCREEN OF DISK MANAGEMENT. ANY HELP WOULD BE APRECIATED. - THANKS.

    Hello

    Exactly what you do when you get the message "Please insert a disk in drive A;

    Your cables might be backward. Some cables I've seen can be connected backwards, but normally there is a lack of female pin and/or a physical bar that stops you place the cable correctly. In case of doubt, all cables (that I saw) have an edge that is color which is the limit where pin 1 is. Your motherboard and the floppy drive (s) should also indicate what is pin 1 (sometimes with the number 1) or sometimes by an arrowhead. In addition, the end of the cable with the twist must be connected on the floppy drive.

    As you have obviously been disconnecting and reconnecting the cable, you should check for twisted on the Board and the drive pins.

    The device does not show in disk management, but should appear in the Device Manager.

    Don't you hear the drive trying to search the diskette?

    Are your formatted diskettes?

    Have you tried a new pre-formatted floppy?

    I do not recommend people to use diskettes these days. The reasons include

    • reliability
    • capacity
    • convenience

    Also, although I did not buy the disks for centuries, I wouldn't be surprised to see that memory sticks are cheaper than a box of diskettes and hold much more data.

    I would say get a memory stick and use it instead of floppy disks.

    Tricky

  • "Please insert a disc into drive I" error message problem. Help, please!

    I get the error message "Please insert a disc in the drive I" when I try to attach a drive external hard (in a case of hard disk) via a USB 2.0 to my Dell Dimension 8400 computer. I am running Windows XP Prorfessional.

    When I attach an external hard drive that comes with its own enclosure as a Western Digital MyBook via the same cable USB 2.0 the following happens. Windows Explorer shows the new disks I and J. If I try to open the drive I have, I get the "Please insert a disc into drive I"message.» However, when I try to open the drive J I'm able to do it and see the files, in this case, the Western Digital MyBook. I can also open these files.

    I searched the Internet for solutions to this problem. In some cases, the problem can be solved by renaming the drive letter, but this does not work in my case. Most of the sites I visited fail to provide a solution. Very many missions I've read on various sites, the problem seems to be related to error messages has Microsoft Windows. The solution would seem to have to disable this / these messages by changing the relevant parts of the registry. (See: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/logonuiexe-no-disk-there-is-no-disk-in-the-drive/7a158e14-6a56-4bfd-b1b5-796c3ccea3b0?page=2&tm=1341781513552, http://www.w7forums.com/please-insert-disc-into-drive-error-t11264p2.html, http://support.microsoft.com/kb/281345)

    Unfortunately, the information that I found are too vague and contradictory to me. Microsoft seems to suggest changing the value of ErrorMode in CurrentControlSet so that the user gets more no error message 'hard' (modification of the: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows\ErrorMode value = 2). However, this suggestion for the backup of SQL Server databases. It also seems a bit drastic to turn off hardware error messages. In another post the suggestion is to delete upper and lower filters in the section of the registry that controls the hard drive. The problem here is that you may have to reload the software. Also, I'm afraid I'll mess up the registry.

    I would be grateful to anyone who could tell me what parts of the need to register to edit and how to disable this message ' Please insert a disc in the drive I have. "

    I suspect that the boxes of hard drive that does not open professional XP are somehow corrupt. Unfortunately, the error message keeps me from use any diagnostic software to examine the hard drives in these speakers. In this regard, I would be grateful to anyone who might suggest a diagnosis good freeware hard drive.

    I thank the members of the forum for their help in advance.

    I really appreciate all help members can give me.

    1, the diagnostic software that youre looking for WDC, is a MS-DOS

    utility. Download from WDC, installed on an MS-DOS formatted disk, pc boot

    on disk, it automatically runs... With respect to the current problem, try to go to run, type:

    diskmgmt.msc

    MSC, locate the hd, L.click on this subject, go to actions, all, select 'enable ',.

    close the msc...

    You can also, type: cmd in run, type cmd: DiskPart in DiskPart, type:

    The type of disk list: list volume type: HELP for cmds all the...

  • «There is no disk in the drive.please insert a disc in the drive \Device\Harddisk1\DR4.»

    Hi all!

    When I try to install AVG on my WINDOWS XP SP2, a message is displayed with Titile "scvhost.exe - no disk" and the body of the message said that "there is no disk in the drive. Insert a disc into drive \Device\Harddisk1\DR4.

    attachment: -.

    http://i51.Tinypic.com/6zoaoo.gif

    or

    Please help me as soon as possible!

    Thank you very much!

    Post in the forums of users AVG.

  • How to reset the options when you enter a disc in the drive.

    Apparently, I put the options in the window when I insert a disc to be permanent.  How to return to default values?

    Hello
    Welcome to the HP Forum!

    pappy444 wrote:

    Apparently, I put the options in the window when I insert a disc to be permanent.  How to return to default values?

    Please to identify your computer.

    Ook from Lto the base/back/side of the pc/laptop to the sticker with barcode.

    Item number of pole 2 as seen on the following example of label with barcode of a HP laptop. The barcode on your HP product may be slightly different in appearance, but will still have important information necessary for us to help you.

    #Do not post not the serial number of your product because it is personal information. ###

    Display the version of the operating system installed (State whether 32 or 64 bit) and the processor as one product AMD or Intel

    What specific drive you are talking about the State. Do you mean an optical drive such as a CD or a DVD?

    If you use Windows 7 or Vista:

    Click the Windows Orb and in the search box, type autoplay.

    Above, you will see the option change the defaults for the media or devices. Select it.

    Now, you can choose the default actions you want to happen with devices and media. Once you have chosen don't forget to click on save.

    Best regards

    ERICO

  • Table colors in numbers?  Why when I insert a chart into a spreadsheet is there only six 6 colors.

    When you insert a chart in the graphic map has six colors.  Are there more color options?  I need eight different colors on my list!

    Hi Mary,

    Click the chart, and then click to select it on the seventh series (G).

    Panel format > Style > stroke (for the outline of the symbol data)

    Then click on the circle of the Rainbow to bring up the glorious Color Palette (right in the previous screenshot).

    Choose a different color.

    Repeat for the connecting line.

    Now, click the eighth series (H) and repeat with another color.

    Tip: order c active / disable the color palette.

    Please call with questions.

    Kind regards

    Ian.

  • When I insert an image in the body of my email, it is replaced with an attachment when the recipient gets (also using OE).

    I use outlook express 6 on windows xp pro.

    When I Insert an image in the body of my email, it is replaced with an attachment when the recipient gets (also using OE).
    I did use the option of fixing , I used to Insert.  The reverse also occurs.  When someone using OE sends me an email with
    a peak inside the body of the email, it appears in the box and not in the body of the email. This happens only when they concern the
    my program.  Others using OE does this experience between them.

    My mail sending format is HTML and in its settings, I checked "send pictures with messages. In addition, in the tools of internet explorer, advanced, multimedia.
    I 'send photos' checked also, in the email window, under 'format', ' Rich Text (HTML) "checked.

    I have recently reinstalled cleanly win xp to address a system idle in general.  All updates are in place and tested it with antivirus and anti-malware programs.

    That is what it is?

    [Transferred from Internet Explorer]

    Original title: outlook express

    Tools | Options | Read. Read all messages in plain text it is checked? This it will make become an attachment.

  • Repeat the mistake of Photoscreensaver.scr: "there is no disk in the drive. Insert a disc into drive \Device\Harddisk4\DR4.

    I've looked everywhere to find a solution to this problem, but it will not go away.  the message I get is

    "There is no disk in the drive. Insert a disc into drive \Device\Harddisk4\DR4.

    I have only one hard drive installed, my C drive with a partition D of the spirit of the original plant. I would be very grateful is some has a fix for this!

    Hello

    This can happen if you have conencted some disk of the machine that has pictures and you have set up the photos in the screen saver.

    You can try to change the photo screensaver can access the registry path if it exists.

    a. Click Start, type regedit in the search box and press ENTER.

    b. navigate to the

    HKEY_CURRENT_USER\Software\Microsoft\Windows Gallery\Slideshow\Screensaver photo

    c. If the screen saver is mentioned in the settings, then on the right you will see "FolderPath".

    (d) the entry for folderpath should be C:\Users\Public\Pictures\Sample pictures

    e. If isn't changing for the above entry.

    f. exit the registry editor, restart the computer and check.

    Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    For more information about how to back up and restore the registry, follow the steps from the link below:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • error message: "Please insert a disc into drive DVD D."

    I'm trying to copy files from my hard drive on a DVD. I put a blank disc and get the error message: "Please insert a disc into drive DVD D." have you tried several disks with the same result, & all are empty. The original files were on a disc & system had no problem at the opening of this disc.

    Hello

    Try this to Fix It: http://support.microsoft.com/mats/cd_dvd_drive_problems/ . Not exactly a rare problem in Windows 7.

    Let me know if this solves the problem for you.

    Kind regards

    BearPup

Maybe you are looking for

  • Wake up Apple TV but the TV remains blank

    Hey guys, when I wake up my apple TV, the light turns on, but my TV remains empty. The only way I can solve this is if I unplug the power cord and plug it in again. Anyone else having the same questions or know a fix? Thank you...

  • Opening on iPhone6 screen icons went down 1 "?

    my screen Phone6 now has opening icons on the bottom half of the screen, high is empty, although normal resume; appearance when an access point is open. How can I my screen back to normal?

  • HP Probook 450 G2: establishment of HP Client Security

    Hello I recently bought a new HP Probook 450 G2.  The updated provider upgraded the operating system to Windows PRO 8.1. I'm trying to implement the fingerprint reader, but I can't.  I read previous forums and have ensured that the following drivers

  • Sound Volume control

    Windows XP Home SP3 32-bit I couldn't find a specific to this topic so here it is: I wonder why my sound controls disappeared from my taskbar. I don't Remember to do something that would have deleted it. But I can't seem to find a How to get it back.

  • A

    A symbol of the