Equium A60 issue of the wireless USB mouse

Similar Questions

• Equium A60 - 173: A the wireless card or not?

  I wana to know either my laptop (EA60-173)
  has the wireless card or not. If so then I can set it up

  Hello

  Each unit with wireless card has a label of WiFi in the lower corner, and the card is also listed in Device Manager. Unfortunately I found the info Equium A60 isn't ready WiFi and only solution is the card PCMCIA WLAN or same USB.

  Good bye

• Presario R3000 (R3200?) and the wireless USB mouse

  I have a Presario R3000 (or, perhaps, R3200) bought at Office Depot ages ago...

  Also, for centuries, I used a mouse Microsoft usb/wireless.  This mouse is connected through a hub USB of TrendNet.

  Suddenly, a few days ago the mouse is not responding.

  I tried to uninstall/reinstall the drivers, peripheral and even tried a BIOS flash, nothing helps.

  Here's what's weird:

  (1) a WIRED USB mouse will work, without any problem, in the same usb ports that the Wireless does NOT work in (I try all 3 ports of the laptop and those on the hub, in all of this).

  (2) the mouse (and the replacement, I bought, thinking that my mouse is dead) appear correctly in Device Manager - they just do not respond to the movement.

  What is a USB problem?  A power USB problem?  A Windows XP (pro, R2) problem?  A motherboard problem?

  I have no idea where to continue troubleshooting...

  Thank you

  EM

  It may be a stupid question but... you did not put fresh batteries in the mouse, have you tried new batteries?

• Equium A60 crashed during the update of the Bios

  Hello, can someone tell me if this can be repaired. IHAVE an A60 Equium that crashed during the update of the BIOS, now he died nothing lights up.
  Thanks in advance

  I presume that the BIOS chip is damaged. In this case, you can do anything to make it work again. Just approved can help.

  The problem is that the repair can be quite expensive. Check it out. If selling Yes the laptop on eBay and... you know what I mean. :(

• Updating BIOS on Equium A60 to cause the BSOD?

  Hey,.
  I had my Equium A60 for a little less than 2 years and now it has started flasihing a blue screen when it works for a while, I tried to read what he says but it's too fast and then it restarts the computer! the only things I can do out there are BIOS of letters that I've now put together probably need an updated (or so I hope this is just the problem)...

  given that I've never updated the BIOS until I was wondering if I make a mistake it will cover on my extended warranty? I think I also insurance on it could someone help please?

  Hello

  This document explains how to disable the automatic restart of Windows XP after a system failure:
  http://support.toshiba-tro.de/KB0/FAQ5B01770000R01.htm

  If you turn off it does not restart the laptop and you can read the error message.
  But I think that this message is not really a help. You will get a memory address, and a common user is not able to read this BSOD.

  The BSOD appears especially because of the misconduct of software or a hardware malfunction.
  I put t think that BIOS update will help you with this problem.
  I think you should try to reinstall the operating system. Especially the new facility allows to solve software problems

  But probably the high temperature may also be responsible for these BSOD errors.
  In this case you should check the fans. Most dust and debris would be responsible for the high temperature because fans may not turn with a maximum return.

  If you have no experience a technician must clean the notebook professionally.

• Compatibility of the 'wireless laser mouse 7000' with 'wireless laser mouse 6000 receiver.

  Hello

  One of my colleagues gave me his extra Wireless Laser Mouse 7000, but he gave me a Wireless Laser Mouse 6000 receiver. will be the mouse 7000 and 6000 receiver work? are they compatible?

  help someone?

  Hello

  Yes those should work - just install the software (Intellipoint) and configure the mouse than the 7000.

  IntelliPoint - free
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Right-click on the wireless 5000 mouse

  I just got a wireless 5000 mouse and keyboard. Right-clicking does not work! I tried to uninstall / and restalling the program anything, I restarted the computer, nothing, I've updated Windows update; but the keyboard works fin, but the mouse botton. Help, please!

  The right click is the default value. Thank you very much for your help! I'm going back today.

• Issue of the wireless feature

  Specifically, my only pressing question is: the wireless antenna on the HP OfficeJet 6000 wireless model convertible turned off/disabled if the wireless feature is not necessary/no desired?  I am aware of the existence of the standard model HP 6000 of JO, which does not include the wireless feature.

  I also need to know the functionality typically wireless on HP wireless printers.  Most of them share a common wireless card, or are they all different essentially?

  I want to just familiarize myself with the brand, I manage a store that carries some HP printers.

  Thank you very much!

  Throe

  The wireless card can be disabled through the network portion of the front panel of the printer menu.

  I'm not sure that the wireless cards are widespread, but almost all of them are 802.11 g (not n).

• Track issues with the Wireless Mouse 5000 bought with Wireless Comfort Desktop 5000...

  Just bought a Microsoft Keyboard and Mouse (Wireless Comfort Desktop 5000). For some reason any mouse is pointing upwards and is not followed correctly. What seems to be the case after a few minutes of use tracking becomes unstable and it feels like the mouse pointer is delayed and begins to jump around the screen. It is even more evident when I start trying to drag windows around the office and if I drag too fast it starts to "hiccup" (best I can describe it) and it seems to miss a few frames per second that I am dragging to the desktop. I noticed in games, especially the FPS, quick turns because of the mouse to lose track, and a second, I'm facing forward and the other second I'm back, with no apparent transition between the two. I tried to disable the accuracy monitoring, but to no avail... For any help or suggestion would be appreciated...

  I use Windows 7 Professional and have no such problems with 8 year old Logitech wireless mouse, this keyboard is replacement.

  I know this is an old thread, but I can see nowear where the problem has been resolved.  I have a Logitech wireless mouse on my laptop and a thread on my desk, both had the same problem. The problem has been solved for me using just a mouse pad, no problem since! This answer may be there somewhere but I didn't fall on it even from Microsoft (surprise). Incidentally, my mousepad is often a sheet of A4 paper on a clip board. If someone actually reads this please let me know if it was any help.

• Wireless USB mouse and keyboard no longer works when disconnected and then reconnected. Cannot connect to system to be solved.

  

  I am facing a problem on my XP machine.  Here is what happened...

  I unplugged all devices and USB keyboard and mouse USB in order to move to another office.  Then I put everything back in place, then started my machine.  Mouse and keyboard not responding do not, so I can't connect it to resolve the issue.  Tried in safe mode without success.  My mouse and keyboard are made from Microsoft and are wireless.  Unsuccessful despite everything I try.  Any ideas?

  Hi Nascarfan48,

  Thanks for the update. We recommend that you check if this article helps you fix the current number:http://support.microsoft.com/kb/258826

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Wireless USB mouse works only with Windows 7

  When I plug the usb antenna, it recognizes and installs successfully the mouse.  I then sync the two but the mouse does not work.  In the device, the mouse Manager is listed under "Human Interface Devices" as an "input USB device..."  I deleted and reinstalled, rebooted my computer and several other things but still cannot make it work...

  Any suggestions?

  Thank you
  SGT Cren

  I guess that your USB ports are in need of a better driver. It is probably in your drivers "chipset".

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Equium A60 laptop - installing the software of Rio

  Hi I have a problem with my Rio software. During extraction of a CD "hold it". I wondering if anyone in the area of Surrey & Hampshire has experience reinstalling, which includes the update of the USB/Chipset drivers and update the BIOS especially advised to me of Rio. Anyone out there familiar with the software installation would be really useful for me - thank you very much

  Hello

  If you need some updates that you can find them all on http://eu.computers.toshiba-europe.com topic support & downloads. After update BIOS download here you can find the txt document and nothing description how to update the BIOS. As much as I know there no update for driver chipset or USB.

  What kind of problems you have with the software of Rio?

  Good bye

• Issue of the interface USB-6501

  When an i/o on NI USB-6501 is configured as input, pull-up k 4.7 present 5V inputs and outputs or pull-up only internally here is if configured as open-drain output?

  This pull-up's equipment... does not change when you reconfigure the port.  It is just inside the output terminals.

• Equium A60: I get the error message using explorer.exe

  Whenever I try to open an image file using paint or Fax/Image viewer, or I try to drag a file to a folder, I get the following error message:

  "Windows Explorer has encountered a problem and needs to close. We are sorry for the inconvenience ".

  The error report says:

  "AppName: explorer.exe AppVer: 6.0.2900.2180 ModName: rpcrt4.dll.
  "ModVer: 5.1.2600.2180 Offset: 000847a 6.

  Also I can't open Web pages that open in a new window, IE. Norton Internet Security 2005 also does not open, but has claimed to be active in the background.

  Does anyone have advice for me?

  I tried all the help for explorer.exe on helpwithwindows.com problems but nothing suggested worked - as spyware, malaware removal. I ran a few controls on-line virus - given that Norton does not work I have tried the scans online.

  The laptop was bought last year, and we have lost the recovery CD - so if we need them, then where we can get replacements?

  Thank you very much

  Jonathan

  HI Jonathan,.

  It seems to me that if your OS has been corrupted, and I would recommend that you re-install. You can get the replacement of any Toshiba authorized Service partner recovery CD. You can get a list of the asp from the Toshiba web site.

  Kind regards

• Equium A60-155: remove the HARD drive

  I am interested to remove the hard drive from the laptop so that I can save the data.

  Anyone know where I can get instructions on where it is located?

  I looked at the 'User Guide' section of the Web site, but it does not contain the information.

  At the moment the machine is blue Windows to load testing.

  Hello

  In my opinion, we must open Notepad.
  In this case, it of necessary to carefully remove the covers, the keyboard and the screws that put him at the bottom of the unit.
  Please Note: you will lose the warranty if you open Notepad.
  But if your warranty is still valid, you should ask the ASP for the instruction or detailed information.

  Good bye