Equium A60 - Touchpad Code 10.

Hi there, hope someone can help you.
The touchpad on my laptop has suddenly stopped working.
After checking the properties, he said there is a "Code 10" problem
So far I have rolled back drivers, drivers updated & also uninstalled then reinstalled the touchpad, but the problem persists.

Does anyone have any ideas?

Thank you

Hello

This code declares that it is impossible to start the device. It would be interesting to know, when the message with code 10 began. Did plug you in other devices on your machine? This problem can occur because when a new device is added to your computer and Configuration Manager must arbitrate the resources of the computer and try to assign resources to each device.
Secondly it of possible that material (touchpad) has had a default. In this case, you must contact the service partner.

Good bye

Tags: Toshiba

Similar Questions

  • Re: Equium A60: DVD drive is not recognized - error code 39

    Hello

    My Equium A60 works very well for 4 years now.
    Lately the DVD ramis playing about and finally today there disappear form the drive list altogether.
    I uninstall the drive and install it again, but there is no difference.

    Windows gives me this message:
    + Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) +.

    could someone help me please!

    Thank you

    This issue has been described a lot of time here in the forum:
    Please check these discussions:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=129807&

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=106314𙽊

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=107214𚋎

  • Must disable Touchpad tapping Equium A60-173

    OK, so my father, I bought a laptop a few years and now it has forwarded to me. I am wanting to turn off tapping it on the button, but I can't find an option to do so.
    I installed a new copy of Windows XP Pro, so there may be some missing drivers that come on the recovery CD.
    I tried to find all the drivers, but I can't find my notebook anywhere. I ran the Toshiba program that is supposed to detect what laptop you have, but it came with nothing when I ran it and I also searched in the drivers on the Toshiba site section, but my laptop does not even appear in the choice of laptops.

    It is a Toshiba Equium and on the back, he said Equium A60-173 and the model number is PSA67E-00700C8J.

    So, if someone can tell me please how to disable the tapping on the touch pad that would be great. I can't disable the touchpad entirely because of course I want to control the mouse pointer.

    I saw a post that said to press Fn and F9, but has nothing, probably because I don't have the correct drivers installed.

    Any help would be great.

    Hey Buddy,

    The touchpad tapping function can be disabled in the options of the touchpad driver. FN + F9 key combination to disable the touchpad together so it s another function.

    The tapping function can be disabled if the touchpad drivers are installed. If you install Windows on a normal disc from Microsoft no drivers are installed and everything you need to install yourself. If you are using the Toshiba recovery that all disk drivers and tools are installed automatically because it contains a picture of the factory settings. Recovery disk is more comfortable.

    All the drivers and tools you need now can be downloaded here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
    * Archive * > Equium > Equium A60 > PSA67E

    As you can see you only need to search the Archives to find the drivers ;)

  • Equium A60-155 - touchpad cable required

    Hi guys,.

    Recently, my mousepad on my laptop has stopped working. So I took it to a computer to check it out.
    He concluded that the cable that connects the mousepad on the motherboard had a small tear in there that cut through some of the metal strips.

    So I am buying a new internal cable of mousepad from somewhere but I can't find anywhere that sells it.
    MY warranty has run out and I do not get a response from technical support Toshiba (at least not yet).

    Anyone know where I can get the Toshiba Equium A60 - 155 Mousepad cable that connects the motherboard to the United Kingdom?

    For any help or suggestion would be appreciated.

    Thank you

    Shuja

    Hello

    Generally, all Toshiba laptop parts could be bought of the ASP in your country.
    I think that guys would be able to order directly from Toshiba.

    If one of the local FSA does not, then try another service point.

    Here you can find the database with all of the ASP s worldwide:

    http://EU.computers.Toshiba-Europe.com/-> support Download Center &-> find an authorized service provider

    Good luck

  • Equium A60 - blue screen at startup

    Hi... problem with Equium A60. Running on Windows XP SP2, when I start the computer I see the windows xp logo and then all of a sudden it is blue screen and try to restart. What could be wrong? Any sugessions...

    Thank you

    Try to start in safe mode. To do this turn on the unit and start pressing F8 immediately, in the advanced options menu, select Safe mode. Log on as administrator. When safe mode has loaded right click on my computer-properties online-online advanced settings-online Startup Recovery & -online the system failure => to uncheck the box that says automatically restart => click OK.

    Then stop and restart normally. Now when it bluescreens, you should be able to see the complete error message. You can have a STOP error with a lot of 0s in it. Write it down. Type the STOP in the Google code or support.microsoft.com and see what happens or post it back here, chances are that in this regard, there is a knockout. unless it's a hardware problem.

  • Equium A60 - 157 HELP Card/PCMCIA wireless network!

    Hi all!

    This problem has been frustrating me for at least 2 months.

    OK, I recently bought a Belkin Wireless G Notebook Card (wifi card).
    The first time I installed the wifi card it worked perfectly. I powered
    extinguish your laptop (after I had finished working on it). The next day
    When I turned the laptop on, you guessed it, the wifi card was not
    work. I did not remove the wifi card for the power off/power on stage.

    When I went into Device Manager, a yellow exclamation point was
    above the wifi card. When I looked at the properties of wifi cards, I found the
    following message appears:

    This device cannot find enough free resources that it can use. (Code 12)
    If you want to use this device, you will need to disable one of the other devices on this system.
    Click Troubleshoot to start the troubleshooter for this device.

    I tried unistalling and reinstalling the wifi card. I tried to use the latest Belkin drivers for the wifi card. Sometimes it works, but when I have the power turned off/turned on the laptop it s not go.

    One of the ways I got the card to operate was removing and inserting the card several times
    until he finds resources and finally worked. I put t use this method as, obviously, I might damage the cardbus slot and the card. In the meantime I ve been using a Belkin Wireless G USB network adapter. I had no problems with the USB adapter, but I prefer to use the wifi card. This is because the majority of the wifi card is housed inside the laptop, so it s not easily evicted. The USB adapter is great for wireless networks inside, but too risky for roaming outside.

    I had this problem of 1.70 at 1.8 ° C bios version, and I still have it with revision 1.90. I intend to return m wifi card in the store for an Exchange, but I have a really bad feeling that the same thing will happen with the replacement of the card. I m not convinced that the current wifi card is defective, because it works perfectly when he gets the resources.

    I tried to manually configure resources on the devices, but I have a major problem. Windows seems to be LOCKED in the automatic settings. The automatic settings check box is grayed out completely, it is impossible for me clear the checkbox. I did not take anything in the bios that can help me solve this problem.

    I noticed that there are many devices running off IRQ (interrupt requests) 19, when you view resources by type in Device Manager. These devices are:

    Standard enhanced PCI to USB Host Controller
    USB host controller standard OpenHCD x 2 (two entries)
    Texas Instruments OHCI Compliant IEEE 1394 Host Controller
    Controller CardBus Texas Instrumetns PCI-1410

    When the wireless card works she also runs IRQ 19, but as I said before Windows is locked in the automatic settings and do not manually configure the hardware resources.

    Equium A60-157 is not provided on board, but it has the potential for. WiFi L.e.d. on the front panel, physical location for wifi turn on side panel wireless icon and F8. Someone know if Toshiba offer an upgrade service, or can I install wifi on board myself?

    ANYONE, PLEASE HELP ME WITH THESE QUESTIONS!
    Thanks for your time!

    Hello

    I found this for you:

    Both devices have received a same ports of entry/exit (e/s), the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or a combination of both). This error message may also appear if the BIOS did not allocate enough resources to the device (for example, if a (USB) universal serial bus controller does not get a break in the BIOS because of a damaged MPS (Multiprocessor) system table).
    You can use Device Manager to determine where the conflict is and turn off the device in conflict. On the tab General properties of the device, click Troubleshoot to start the Troubleshooting Wizard.
    Try disabling the features of conflict. It will be interesting to know if the problem will occur again.

    In my opinion, you should contact the Service partner and ask them if the unit is ready for the Wi - Fi module. Sorry, but I'm not sure about that and I don't want to give you a bad information about it.

  • Equium A60: Game - Riding Star fatal error

    My daughter tries to run Riding Star on my Equium A60, but confronted with problems. Load, it won't work. Instead, the message appears: "horse Star - fatal error. The failure of the assertion code. (null) ».

    This is a new copy of the game, not a DIY job. He pretended to be compatible XP (we miss Home Edition). It is not compatible with the Pentium 4, but use A60 Celeron D 335, I think - at least my daughter to other games that require similar specs run OK on the A60.

    Advice (I'm a numbskull computer)?

    Hello

    Equium A60 uses a Pentium 4 HT processor. It s not Celeron.
    But however if you have any problems with this game so to contact the game manufacturers and/or check the support Web site.

    PS: You're talking to a copy of the game. Maybe this problem occurs because of this copy of the game.

  • Equium A60 - what software do I need for the FN keys?

    Finally bought a new motherboard for my Equium A60 girls.

    After you have installed all the drivers, I have a few missing buttons on the keyboard and function keys do not work. Did anyone know what piece of software, I need to load on the Toshiba site to get them all to work because I do not have the original Toshiba for this model drive? The Council is a A60-157.

    Thank you very much

    Hello

    Do you have what OS installed?
    If you have installed XP on Equium A60 you can answer this question for yourself because the Toshiba site, you can find the installation instructions document. This is a list for driver installation order recommend.
    Check it!

    For keys FN and all the other special function, you need Toshiba tools:
    TOSHIBA console
    TOSHIBA controls
    TOSHIBA Hotkey utilities for display devices
    TOSHIBA Hotkey utility
    TOSHIBA Touchpad utility
    TOSHIBA utilities

  • Delition password BIOS Equium A60

    Hello

    OK a friend rang me today about its Equium A60, her ex-boyfriend put a password on the BIOS and I can't work on how to remove it, she asked him what he is, he says he was drunk and don't know what it is. She was quoted A £150 by pc magazine that is extortion.

    I had it in bits but can't seem to find the stack, the means of clearing BIOS listed on this site do not work, the thing is is not really looked after so it would not be worth spending A £150 on it, but his college work is about this, which is his only concern.

    Someone knows a way, in addition to short-circuit the chip lol. I'll be honest I'm not used to laptops, of course I said yes assuming that they would have a removable battery, like a normal pc, he has not even had one floppy else I would use a startup back disc and wipe the bios with the code. I seem to be hitting the brick walls with it.

    Please don t go to any PC shop but contact Toshiba authorized partner in your country. I am 100% sure, it is not so expensive. They will remove BIOS password for you.

  • Cd\dvd drive disappeared on Equium A60

    Hi all

    Can someone help me? I have an Equium A60. It's 18 months, outside the usual on heating problems and closing, now it starts but my DVD drive disappeared. I have a rug * a DVD-RAM UJ - 830 s. Win XP just didn't load it.

    He is no longer in 'my computer '. I'm in Control Panel of configuration and the 'systems' then 'system properties' and watched on 'Device Manager '. The drive is there, but with a big yellow exclamation point. So I checked the 'properties' it has the following message: "Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41) "and troubleshooting has no use.

    More than heating cooked my drive? I've updated the drivers for it, but this has no effect.

    Any ideas... ?? Thanks in advance...

    Hello

    When you use advanced search option, you will find several similar views with a solution to this problem, but once again for you http://support.microsoft.com/default.aspx?scid=kb;en-us;320553

    Please use method 1.

  • Drive recovery for Equium A60-157 PSA67E

    Has anyone got a copy of the disc recovery issued with an equium A60-157 PSA67E as I am trying to get this laptop for work and unable to get its hotkeys control and be able to work.

    I think I've worn out my wellcome with Equium forum and technical appeal but it's somewhere I myself lack of understanding on this subject.

    I loaded all recent downloads listed on their site, but always impossible to get these functions to work.

    So can you help me please...

    David

    Hello

    Why you n t install a new Windows OS on this laptop?
    Missing drivers can be downloaded from the page of European driver of Toshiba.
    All drivers are available!

    The recovery disc can be ordered for this model of laptop because it s too old.
    Clean install OS Win + drivers is therefore the only option

  • System failure-Equium A60 won't boot to the top

    Hey guys & gals
    for the first time using this site and need some advice!

    I have a toshiba laptop
    "equium a60 model PSA67E-No.-00200D8J.

    Ive had problems with my start up! I get an error message saying: I have a missing driver!

    read the MSG error-"system32\drivers\ntfs.sys".

    Also get message...

    "windows was not start because the following file is missing or damaged:
    system32\DRIVERS\isapnp.sys ".

    Unfortunately I can't find my original CD boot disk & I don't want to lose the files saved... not too good sense when it comes to problems with this...

    If anyone can give some advice please, it drives me crazy! Laughing out loud

    Alan.

    Heyho,

    looks like you're in big trouble. I think the only chance to backup your files is to get some linux live CD (knoppix, ubuntu and mandrake) and an external hard drive to copy the files to your hard drive internal to external hard drive attached.

    The best way would be to ask a technician or a guy who is VERY familiar with computers to backup your data.

    After that you need to reinstall your operating system but without the recovery CD, you are out of luck. Then you don't have a lot of options.
    One of these options is to look for startup disk or how to call it: "restore CD". If it is not available you should contact an authorized local dealer servicepartner toshiba and get a new recovery disk. The last option is to buy a Windows XP or to ask someone (family, friends, the one who) for a Windows XP to install.

    Greetings

  • Equium A60 - missing or corrupt ntfs.sys, please run the installation program

    When starting my Equium A60 I get the answer "ntfs.sys missing or damaged please run.

    When I run the toshiba recovery still disc, it does not cure it and I tried to boot from xp cd and it says no bootable cd in the device.

    I remember that this issue has already been discussed in different threads here in the forum.
    Why you n t use the advanced search option?

    OK I did and found these two threads:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24051

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24292

    I would be grateful for feedback!

    Greetings

  • Equium A60: XP blue screen of death: Stop: c000021a - fatal error message

    "Stop: c000021a {fatal system error} the Session manager initialization system.
    ended unexpectedly with the State 0xc000026c (0x00000000 0x00000000). The system has been shut down. »

    This is the message I get on a blue screen. I can't start the computer. His tent to restart conineously after this error message. What could be wrong someone can help.

    my system is equium A60, running on windows xp sp2 installed very recently.

    Thanks in advance.

    You should check the support microsoft help you dosent his good companion
    This, you should get started http://support.microsoft.com/kb/317189

  • Failed to load money microsoft on Equium A60

    Hello. I have an equium A60 and when I try to install microsoft money, it says that it cannot operate while the toshiba keyboard shortcut properties are running! How can I activate the shortcut keys off (not that I want to do), but, if not, how can I get setup! Any suggestions greatly appreciated!

    Please see this topic that has been placed in this forum there is a little time ;)

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=1476

    I think this should help you.
    Please post again if it will work.

Maybe you are looking for