Equium A60 very slow with Windows XP SP 2

Similar Questions

• My laptop is very slow with windows 7 64 bit

  I install windows 7 64 bit on my dell xps m1530 4 GB of ram, but it seems that windows 7 use my ram too and my phone did become much slower than vista. Is there something wrong with my hardware or drivers? Hope someone can help me solve this problem. Thank you very much.

  Hi vinhnqls,

  I suggest to access the link below and follow the steps described in the article in order to optimize your computer for better performance. The article is intended for Windows Vista, but it remains valid for Windows 7 as well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance#section_3

  Let us know for any further assistance.

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Equium L40 very slow and Windows Defender found a Trojan horse

  I was wondering if you could help me with a situation.

  Turned my laptop on and Windows Defender found a Trojan, so I chose all clear. Then it arrived 5 minutes later and I pressed on delete everything again.

  Afterwards my internet is incredibly slow and often freezing.
  Opening files and folders often locked up but I could still click on the red X if it took 30 seconds to close after that I clicked on the X.

  I get now random pop ups not even on the internet.

  Do you have any suggestions?

  Thank you.

  Hi Kieran

  Have you tried different antivirus software?
  I would recommend this. I use a software called Antivir freeware antivirus and it is nice.
  It of free and you can download it from various internet sites.

  In addition, you could use an Ad-aware to kill this Trojan horse. It of also for free and maybe it could be useful too.
  Google just to download it for free.

  If you won't be able to remove the virus from your system by using programs like Antivir, antivirus Norton antivirus, etc. and then use your Toshiba Recovery CD.

  I think this should help.

  Good bye

  Post edited by: Jaba

• Internet very slow with Windows 7.

  Here's my problem. Since I installed Windows 7 Pro x 64 my internet acted weird. There are 3 other computers on the network that is running Windows XP Pro 32-bit and a running Vista Home Premium 32 bit. Every time someone else is downloading something or watch a movie online my internet slows to void / 3Mbit normal speeds dial-up is the speed. He does only on this computer, when I download something none of the others slow down at all. It does this with 7 also, it does not do this with XP or Vista. I have searched all over the internet and have found nothing useful. Everything I've met has not worked a little. I've reinstalled 7 a few times and even tried all versions of the card ethernet driver I could find and nothing helps.

  Hello Remi R,.

  Thanks for posting in the Microsoft Answers forum! Try to start your Windows 7 computer to SafeMode w / Networking to see if the slow speeds still occur. There may be third-party software that is causing your problem. If you please, after back and let me know the results.

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Some games run very slow on Windows 8, as...

  Some games run very slow on Windows 8 as (chicken Invasion "v1, v2, v3" in red alert 2, Age of Empire 2)
  but on Windows 7 on the same Machine perform perfectly, I tried to install DirectX,.
  and tried to install the latest Version of the Driver VGA for Windows8 and tried to change VGA (Nvidia, AMD, Intel)
  but the games (not all games just a few) still running slow...? !!!
  Help, please...

  Wrong, wrong, wrong.

  This is entirely based on compatibility to a level beyond what is offered in the standard "Windows compatibility" section.  In addition to this, everything you said had absolutely nothing to do with the question.  This has nothing to do with starting or whatever it is in the same direction.

  What is happening is that something is interfering with the normal functioning of the game because of changes in the kernel of the operating system because it has been updated / rewritten since the inception of Windows XP.

  @SOVIETTION
  The most likely solution for you has nothing to do with the videobuffer here is how fix you it:

  Find the Red Alert installation directory and find the file * md.ini.
  In revenge for Red Alert 2/Yuri, it will be 'RA2MD. INI"(feel free to make a backup of the file before proceeding)
  Open it with your favorite text editor (Notepad for most people)
  Scroll down until you find the section [Video]
  Just below you will add this line-
  VideoBackBuffer = no
  Save the file in the same place and load the game.

  Enjoy!

  The VideoBackBuffer = none works perfectly, but in my case I also had to set the compatibility mode to Windows XP SP2.

  Bravo for you!

• Very slow initial Windows Update

  Hello

  I just did a fresh install of Windows 7 Ultimate 32 - bit with Service Pack 1.  The initial check of updates has managed to update updates Microsoft, but the initial check for updates of the race since (oh I dunno) 15 or 20 minutes...

  Is this just normal planned waiting for initial windows update time?

  Something has hurt very very badly with Windows Update.

  I agree.   I did a new install of Win7 SP1 yesterday and left Win Update running from one day to the next day - it was always check the updates when I got up this morning.   I thought some of the customizations I made before you start the update might have messed up things so I decided to reinstall this morning.

  First I tried the installation option by using the option to use the latest version on the web - I canceled that after that he spent an hour "collection of information" is then returned to the installation from the CD.   Once I had a fresh install of Win7, I immediately started the update.   It was now 'check updates' for about 3 hours.

  One thing I noticed, is that the history of the update shows that the update agent (7.6.7600.320) was installed during the installation.  It seems to me that the Windows team needs to get some people working on back out this version of the update agent so that Windows can actually exists to update himself.

• Internet very slow on Windows 7, I tried a lot of bugs with no luck

  I have Windows 7 Professional 64-bit. I used it without a problem for several months. But lately I had a very slow internet connection, no matter what program I use to. The same computer dual-boots with Windows XP: XP connects to Windows 7 to 0.3 Mbps and 8 Mbps.

  Security software: Avast and Comodo (use every two months with no problems).

  System Restore has been disabled by mistake, there is no restore points for trying.

  I tried EVERYTHING to fix this! I tried:
  -disabling auto tuning (this greatly improved navigation on the web, before pages would take ages to load, but the download speeds are still slow)
  -Disable IPv6
  -Disable Windows Firewall
  -disable the Windows Defender real-time protection
  Re-setup of ethernet card
  -Re-installation of network card
  -uninstall the Windows updates (those I was actually able to uninstall)
  -boot by using the system configuration to start without starting programs or non-Microsoft services
  -reset the TCP/IP stack
  -safe mode with networking
  -disabled the DHCP broadcast flag
  -change the heuristics of Windows scaling (since he says this overrided other parameters) and the provider settings control congestion

  Is there anything else I can do?

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• My Equium A60 not startup after Windows update

  Hello.
  I have an Equium A60 (PSA67E) about 1 years. There has been many problems with this one recently. First, there was the problem of overheating. The machine would heat up and stops by itself without any warning. I tried many options by keeping the cooling ports clear but dint help not at all.

  I've recently updated my bios version 1.90 such suggested by Toshiba. I always see overheating so far after the bios update.

  The most annoying is the display driver which is in this case a lack of mobility radeon ATI 7000. This would cause the display to become oversized and the resolution is very low. It would go without saying when I restart the machine.

  Last month, I reformatted the machine using the Toshiba Recovery CD. Everything went well until I am passed on the automatic update of windows. The first update coming, and I install and reboot the machine to let it function. He's fine. Comes the second update is installed and I have proceed to restart to allow functional upgrades, it does not start. The machine keeps starting over and over again without loading the OS. The screen is the typical Toshiba boot screen with the yellow light (charger) on the screen and after some time a blue screen is delivered for a short time (I am unable to read this error message it is said) and the machine starts start again. What can be the problem?

  I need to install windows XP SP2, and for this I need to go through the Windows Update. What can be the remedy and on the update of the available display driver. I tried, but it makes the situation worse.
  I used the recovery CD at least 20 times that there is no alternative. I tried to start in safe mode but din't work.

  Hi, Germain,.

  According to your description of the problem it doesn't seem to be anything wrong with what you have done so far, but I just want to clarify a few points.

  1. After installing the recovery CD system you install/activate your anti-virus software?

  2. are you using Windows Update in automatic mode or you manually select the update process?

  I recommend you to turn off automatic error (Advanced tab in system properties) reboot so the system will not attempt to restart when you get your blue error screen. This will allow you to see what error.

  Kind regards

• Equium A60 unstable after installing Windows XP SP2

  I have an Equium A60 which becomes very unstable after upgrade to Windows XP service pack 2. It has been upgraded to the latest released BIOS but no change. Someone at - it ideas?

  Hello

  In my view must avoid any problems at all. Can you please be more specific with unstable Word? What happens exactly?

• Synology Diskstation short very slow with OSX

  I use synology diskstation for 2 years and have never really found it to be very slow when it is connected to my mac pro retina book.

  Plug NAS...

  Synology NAS Office DS213J Bay 2 enclosure £159.99

  Red WD 3 TB for NAS 3.5 inch desktop hard drive - OEM £89.00

  3 TB Seagate 3.5 inch 7200 RPM 64 MB Cache hard SATA3 £89.99

  2 drives installed - 1 set up in mirror

  I measured the speeds and get 3 MB/s reading and writing on wi fi. Direct connection to a gigabit switch that directly relates to NAS both via CAT6 - makes about 35 MB/s reading and 50 MB/s in writing.

  I read a review that has measured the same device and got a 74.5 MB/s write speed and a 56.4 MB/s read speed

  When you run windows in bootcamp on the same machine, I get much better performance.

  I tried to remove a drive (speed tests are the same for each single drive)

  10.11.2 running OSX

  
  

  Is there a particular issue or the goal or the question you are interested in here?   It is clear that you are looking for performance and a few comparisons, but it's not clear (to me) where you're going with this.  Can also check with Synology people, too.

  A few generic comments follow...

  In general...  A Wi - Fi connection is slow, and Wi - Fi with interference makes even slower connections.      Descent and with a tailwind, I expect a little more than 200 Mbps (megabits per second, not megabytes) with semi-recent-grade Wi - Fi 5 GHz dual-slot, assuming a backhaul wired on the gigabit NAS and assuming no interference from Wi - Fi or claim.

  Rusty storage rotation is slow and subject to the configuration.

  Red WD appears without RPM - "Intellipower", with some comments showing a player ~ 5400 RPM, which is quite slow and at no time access in the technical sheets.  If a seller do not post access time and transfer speeds for a disk drive, the device is not intended to be a particularly fast device.  WD indicates both in the note on the sheet, too.

  For most RAID controllers, RAID-1 mirror means the two Scriptures - written to each disk in the mirror game - must fill in before the host i/o is complete.   This slows down the write speed.   If the RAID controller is intelligent - and not all RAID controllers are very smart, then it will give you the first available reading rates from the game of mirror, based on the position of rotation.  Many will just take a drive and give you the e/s as the sector turns around, so you will be waiting on average a demi-revolution.

  If you want a faster access to the storage, stay off WiFi and use two SSD storage or upgrade these disks to 15 K RPM disks configured as a RAID 0 striped.   High-end and storage gear company - the older, hard-disk-based - gets its performance to have zillions of small discs of 15 K RPM configured with disk and controller wholesale large caches, controllers (by rotation-aware) smart and with RAID 10 storage configurations or similar.

  To compare the performance of the device, the configuration of these benchmarks and what you are testing is important.  Reference material, as well as the speeds measured since the test of Windows.

• Internet very slow on Windows Vista (wireless) (originally said Windows 7)

  Original title: very slow internet

  I would like to know what windows 7 64-bit options to activate and to get the best wireless connection.  Right now just getting from one page to the same or another place to place on a page can be a real pain. Thank you for your time

  Proposed by Vista forum moderator as shown in the information system to the Vista computer file
  Home Basic with SP2 installed upgrading.

  Mike

  I apologize is not getting back to you earlier.

  When you download and install games and other you don't normally need to keep what you have downloaded in the downloads folder. Some downloads are wide to remove could free up some disk space! You need to do on a regular basis to keep on top of the problem...

  The content of your video in total 414 GB file. You might look at some of them again? If this is not the case, delete those that you no longer need.

  You have a lot of icons on the desktop. Take a look at these and remove those that you never use.

  When you did above select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter.

• Internet very slow on Windows 7

  A few months ago, I bought a new computer with Vista and experienced terrible internet speeds.  We have dsl and the other computers in the House all the fast internet in xp, so I was sure it was a problem with vista, as described here: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/74f41557-4dd7-44f5-ba39-4b6009520aef

  I was happy to install 7 because I didn't know it would solve my slow internet problems, but... it didn't.  My internet is still very slow, and the machines running xp always move at the speed of light.  This happens in IE and Firefox, and internet is always slow, even using a different wireless adapter.  Any suggestions?

  Hi RiccaDawn,

  Welcome to Microsoft Windows 7 answers Forum!
  

  1. have you tried the steps in the thread mentioned in your message?

  I recommend you try this method first.
  try to browse the internet in mode safe mode with networking. If it's a software conflict, you can solve the problem. If it does not always help, you can try the solutions I listed below in this thread.
  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/74f41557-4DD7-44F5-ba39-4b6009520aef
  
  Method 1. Reset TCP/IP:
  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357

  Method 2. Disable the DHCP Broadcast Flag:
  Link: http://support.microsoft.com/default.aspx/kb/928233
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/322756 (how to back up and restore the registry in Windows)
  Windows 7 can not get an IP address from certain routers or some non-Microsoft DHCP servers
  To resolve this issue, disable the DHCP BROADCAST flag in Windows 7. To do this, follow these steps:
  1. Click Start, type regedit in the search box, and then click regedit in the list programs.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. Locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
  3. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
  4. on the Edit menu, point to new, and then click DWORD (32-bit) value.
  5. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.
  6 right-click DhcpConnEnableBcastFlagToggle, then click on modify.
  7. in the value data box, type 1 and then click OK.
  8. close the registry editor.
  By setting this registry key to 1, Windows 7 trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.
   
  Method 3. Disable IPv6:
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
  NOTE: You should do this for each network connection.

  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• Computer is very slow with El Capitan

  After the recent upgrade to El captain, my Macbook pro (13-inch, mid 2012) became very slow.

  Starting, restarting, Safari, open programs... Wheel of Rainbow all the time.

  If someone could help, I would be very much appreciated!

  Thank you!

  My Etrecheck results:

  EtreCheck version: 3.0.3 (307)

  Report generated 2016-09-20 19:59:32

  Download EtreCheck from https://etrecheck.com

  Time 04:09

  Performance: good

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Hardware Information: ⓘ

  MacBook Pro (13-inch, mid-2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.9 GHz Intel Core i7 CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 667

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.6 (15-1004) - since startup time: less than an hour

  Disc information: ⓘ

  TOSHIBA MK7559GSXF disk0: (750,16 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 749,30 (Go 140.30 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Configuration files: ⓘ

  / etc/hosts - Count: 17

  Guardian: ⓘ

  Any where

  Kernel extensions: ⓘ

  / Library/Application Support/PeerGuardian

  xxx.qnation.PeerGuardian [no charge] (1.1.13 - SDK 10.8 - 2015-10-28) [Support]

  / System/Library/Extensions

  com.Wacom.kext.wacomtablet [no charge] (6.3.8 Wacom tablet - 2 - SDK 10.9-2016-09-20) [Support]

  Launch system officers: ⓘ

  [no charge] 7 tasks Apple

  [loading] Apple 168 jobs

  tasks of Apple 64 [performance]

  Launch system demons: ⓘ

  [no charge] 48 Apple jobs

  [loading] Apple 165 jobs

  [running] Apple 77 jobs

  Launch officers: ⓘ

  [loaded] com.adobe.AAM.Updater - 1.0.plist (2016-09-16) [Support]

  [loading] com.adobe.CS5ServiceManager.plist (2013-01-11) [Support]

  [cannot] com.extensis.FMCore.plist (2016-09-06) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2014-08-13) [Support]

  com.Wacom.wacomtablet.plist [running] (2014-03-31) [Support]

  Launch demons: ⓘ

  [loaded] com.adobe.SwitchBoard.plist (2016-09-16) [Support]

  [loading] com.adobe.fpsaud.plist (2016-08-30) [Support]

  [loading] com.disc - soft.DAEMONTools.PrivilegedHelper.plist (08 / 08/2013) [Support]

  [loading] com.google.keystone.daemon.plist (2016-09-02) [Support]

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-09-16) [Support]

  [loading] com.malwarebytes.MBAMHelperTool.plist (2015-12-28) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2014-08-13) [Support]

  [loading] com.rogueamoeba.instanton - agent.plist (2014-03-25) [Support]

  [loading] xxx.qnation.PeerGuardian.locum.plist (2015-10-28) [Support]

  User launch officers: ⓘ

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-09-20)

  [loading] com.spotify.webhelper.plist (2015-06-08) [Support]

  Items in user login: ⓘ

  Application of hidden caffeine (/ Applications/Caffeine.app)

  Suitcase Fusion 6 hidden Application (/ Applications/Suitcase Fusion 6.app)

  CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-28) [Support]

  Default browser: 601 - SDK 10.11 (2016-09-17)

  Flip4Mac WMV Plugin: 3.2.0.16 - SDK 10.8 (2013-06-07) [Support]

  WacomTabletPlugin: WacomTabletPlugin 2.1.0.6 - SDK 10.9 (2014-03-31) [Support]

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2016-09-16) [Support]

  FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-20) [Support]

  Silverlight: 5.1.20513.0 - SDK 10.6 (2016-09-16) [Support]

  QuickTime Plugin: 7.7.3 (2016-09-17)

  Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-20) [Support]

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  SharePointBrowserPlugin: 14.0.0 (2010-08-25) [Support]

  AdobePDFViewer: 10.1.1 (2016-09-16) [Support]

  JavaAppletPlugin: Java 8 updated 66 17 (2016-09-16) check the version of build

  3rd party preference panes: ⓘ

  Flash Player (2016-08-30) [Support]

  Flip4Mac WMV (2013-03-29) [Support]

  Growl (2016-09-16) [Support]

  Java (2016-09-16) [Support]

  WacomTablet (2016-09-16) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  5% WindowServer

  kernel_task 2%

  0% aslmanager

  0% fontd

  0% AddressBookSourceSync

  Top of page process of memory: ⓘ

  573 MB kernel_task

  Com.apple.WebKit.WebContent (9) 369 MB

  66 MB WindowServer

  Safari of 57 MB

  49MO softwareupdated

  Virtual memory information: ⓘ

  5.37 GB of free RAM

  used 2.63 GB RAM (2.02 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  Sep 20, 2016, 19:52:05 Self test - passed

  Sep 20, 2016, /Library/Logs/DiagnosticReports/FMCore_2016-09-20-183021_[redacted].crash 18:30:21

  / Applications/Suitcase Fusion 6.app/Contents/Resources/FMCore

  Sep 20, 2016, 06:24:44 PM/Library/Logs/DiagnosticReports/WacomTabletDriver_2016-09-20-182444_ [redacted]. Crash

  com.wacom.WacomTabletDriver - Library/Application Support/Tablet/WacomTabletDriver.app/Contents/MacOS/WacomTabletDriver

  Sep 20, 2016, /Library/Logs/DiagnosticReports/FMCore_2016-09-20-181728_[redacted].crash 18:17:28

  First uninstall CleanMyMac3. It is not necessary and can ask questions.

• SatPro A60 very slow operation

  I recently bought a SATPro A60. I loaded Office XPpro and AOL, and it seems to be very slow. Have enabled anti-virus software and firewall. No sign of the virus. I am very disappointed and would really help.
  Thank you

  Hello Sharon,
  Please could you put more details in your notebook, for example what RAM you have installed, and also if the XP Pro is the version OEM Toshiba or authentic Microsoft.

  Also, it is useful to check your task manager for any additional tasks or processes that may be running and which could have a detrimental effect on your system.

  Post edited by: NickyNoogle

• Firefox 5.0 startup is very slow with error message before continuing

  Since the loading of version 5.0, Firefox is very slow to start, and this message until he could continue:
  "A script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to see if the script ends.

  "Script: chrome://tavgp/content/libs/include.js:595.
  The only way to continue is to STOP SCRIPT

  The problem is AVG Safe search and AVG Security Toolbar

  • Problematic extensions - MozillaZine Knowledge Base
    Provides instructions for removing AVG link scanner component - to-beyond to simply disable extension
    http://KB.mozillazine.org/Problematic_extensions

  Similar questions:

  • error chrome://tavgp/content/libs/include.js:595 | Firefox Support Forum | Firefox help
    https://support.Mozilla.com/en-us/questions/787703
  • I get this problem of script is not responding - Script: chrome://tavgp/content/libs/include.js:595 | Firefox Support Forum | Firefox help
    https://support.Mozilla.com/en-us/questions/761982
  • Script: chrome://tavgp/content/avg/avgtbapi.js:125 CE WHO IS WRONG WITH GOOGLE what IT Can t DIFFICULTY THESE BORING 'SCRIPTS?' - Gmail Help
    http://www.Google.com/support/forum/p/Gmail/thread?TID=771813b789154afa & hl = in

  Articles (General information on the message)

  • Script warning unresponsive - MozillaZine Knowledge Base
    http://KB.mozillazine.org/Unresponsive_Script_Warning
  • WARNING unresponsive script | Troubleshooting | Firefox help
    https://support.Mozilla.com/en-us/KB/warning%20Unresponsive%20script?s=script+busy+responding+extension & As = s