Equium A60: What type of CD - RW should I back up my photography

Similar Questions

• Equium A60 - what software do I need for the FN keys?

  Finally bought a new motherboard for my Equium A60 girls.

  After you have installed all the drivers, I have a few missing buttons on the keyboard and function keys do not work. Did anyone know what piece of software, I need to load on the Toshiba site to get them all to work because I do not have the original Toshiba for this model drive? The Council is a A60-157.

  Thank you very much

  Hello

  Do you have what OS installed?
  If you have installed XP on Equium A60 you can answer this question for yourself because the Toshiba site, you can find the installation instructions document. This is a list for driver installation order recommend.
  Check it!

  For keys FN and all the other special function, you need Toshiba tools:
  TOSHIBA console
  TOSHIBA controls
  TOSHIBA Hotkey utilities for display devices
  TOSHIBA Hotkey utility
  TOSHIBA Touchpad utility
  TOSHIBA utilities

• What type of HARD drive should I buy so he could keep in my aspire v3 772g?

  I have never handled parts for laptops before so I'm not really sure what type of HARD drive, I need, and I don't have to build a pc for the last 15 years, so much has changed lol

  If I could really need help, don't really care about ssd so I'll just for a normal HDD on May 1 TB and I you'd be grateful if someone me pointed in the right direction or even a recommendation

  and as I said in the topic, I got an Aspire V3 - 772G

  thnx

  Hello

  Here's the original HDD 1 TB for Aspire V3 - 772G (see links):

• can you tell me what type of game controller should I use in my windows 8 odinary controllers because does not in it

  friends, please tell me what type of controller I use

  I use a Logitech GamepadF310, and it is detected and works perfectly with full 8.1 Windows or Windows RT.

• What type of SIM card should I buy for taking pictures with ZTEOPEN?

  Never used photo with ZTEOPEN purchased 10/2013 option. Another thing I need to take pictures and upload them?

  The SIM card is only used for the mobile network.

  To store your photos, you can use the internal memory, but it is not recommended because of the constraint of storage.

  You should consider the purchase of a MicroSD card.
  If you want only to take pictures with your phone, then you can buy a relatively small MicroSD card, 8 GB will give you plenty of room.

• Can what type of 3D glases I use with my Toshiba 58L7363D?

  Hi @ all.

  IAM new here.

  IAM 33y old, married and has two children.

  I bought a Toshiba 58L7363D (no DG) last year.

  Now my kids want to start with BlueRay´s 3d.

  I have a 3D BlueRay Player.

  Now my question... What type of 3d Glases should?
  Shutter? Or just the passive?

  I can't rly find the right answer here or on Thosiba Homepage.

  I hope you understand me... my English is not rly the best... :(

  Thx for the answers and have a nice day.

  CU Funameise

  Post edited by: funameise

  In the manuals of the user to the page 29 s, I found the info you need active 3D glasses with the FPT-AG03 part number.
  To be honest I m wondering really none of them came with yor TV.

  In any case, use this part number and you can separately order 3D glasses.

  Good luck and enjoy your 3D TV.

• What type of video card to get?

  I have a HP Pavilion a6742p-b PC.

  The integrated graphics are fine for general use, but several games, which I installed refused to run without a graphics caqrd more capable, with more memory etc.

  What type of game card should I do my shopping for this computer? (AGP, PCI-express, etc.).

  I would like to have the dual monitor support if possible. Thank you for any information.

  Charlesb in Texas.

  Thanks, old_geekster, that is great information!

  Dig around for a beefier PS which will suit and hang, max out the RAM to 8 MB and are looking for a PCIexpress card who likes the motherboard.

  I'm happy enough if I can be just a few years behind the curve on the game, a lot of my favorite games back to the last century. -So, is not ready to make the last commands is OK for this machine. Hit capacity so that it can run two monitors and manage more games seems simple enough, and given that I will seek for the video material of last generation, that should offset some of the heftier power load.

  I take a bit of the Pavilion. My trusty old XP machine was destroyed by a weather event, so I did office stuff at home on an old Athlon 400 MHz with 500 MB of RAM and Win98 for too long. Once I have reproduced all data and software on the HP, the old Win98 machine will return to retirement closet once again, with honor, if not with regret.

  Should I publish my experiences pursuing this topic?  I'm a little new here, so I don't know what is appropriate.

  Charlesb

  Message edited by charlesb on 12/03/2009 09:26

• What type of graphics card can I put Poweredge T110 II?

  A result of slots server:

  4 PCIe G2 slots:
  Two x 8 slots (one with x 16 connectors)
  One x 4 slot (with x 8 connector)
  A x 1 slot

  Graphics must support Windows server 2012 (are Windows 8, Windows Server 2012-compatible drivers?). I not looking for something fancy or fast, just something that can take care of 2 monitors via DVI or DisplayPort.

  I looked at NewEgg section of graphics card and it is difficult to understand what type of interface I should take. This is what NewEgg for interface (I see no x 8 or x 4 as shown in the Poweredge T110 II specs):

  PCI Express 3.0 x 16
  PCI Express 2.1 x 16
  PCI Express 2.0 x 16
  PCI Express x 16
  PCI Express x 1
  PCI Express 2.0
  PCI Express 2.1
  PCI Express 3.0

  I would like to try any of the cards with x 8 to the end, even though it says a slot x 16 capacity, but only x 8 power.  The card can only be up to 25w.

  Kind regards

• What DVD players are compatible with Equium A60 PSA67E?

  my question; What dvd players are compatible for an equium a60 (psa67e-001001en)?

  background; I did a very stupid thing! while I was at the Japan and about 18 months after buying my a60 in the United Kingdom, the packaged dvd player. I replaced it with a teac dvd player and it worked like a dream! I threw the old disk (I think it was a matsu * has, but can't remember the exact model). in any case, I came home and had a little time on my hands, so I decided to set my machine and corrupted the windows xp registry.

  Now, windows xp runs in the loop, I can't access and I need to wipe the hard drive and start again essentially. I put the recovery disk in, but the computer doesn't read him and desperately wants his wacky way to windows. I believe that it is not recognizing the teac drive that I used to replace the old. I think that if I put an original return type, the firmware can recognize the drive and I'll be back in business... or so I hope!

  of course, all the other tips would be welcome too! Thank you.

  work around? PS a work around, I thought so... copy the contents of the diskette of recovery on a hard drive (using my old computer) can change the current hard drive in my a60 with it... theory; When the computer detects the content during the start-up, it will install xp on another part of this drive and I have a working machine once again. could - this something like this work? any thoughts?

  Post edited by: markchev66

  Hello

  Did you look in the manual of the user who is usually preinstalled on your laptop?
  There you should find information.

  I found these:
  Toshiba SD-C2612
  Toshiba SD-R6332
  Matsu * a UJ-811BTJA-A
  Matsu * a UJDA760
  Pioneer DVR-K13TBA
  Toshiba SD-R2512
  TEAC DW-224TH

  It is only a part of the list mentioned in the manual. Check it!

• I have a Mid-2010 Mac Pro Tower running OS Yosemite to which I would like to connect a Tower (G-Technology) G-Speed Q RAID via eSATA connection.  What type of card PCIe eSATA should I install in my Mac Pro tower to enable such a connection?

  I have a Mid-2010 Mac Pro Tower running OS Yosemite to which I would like to connect a Tower (G-Technology) G-Speed Q RAID via eSATA connection.  What type of card PCIe eSATA should I install in my Mac Pro tower to enable such a connection?

  https://eShop.MacSales.com/item/NewerTech/MXPCIE2E2U3/

  https://eShop.MacSales.com/item/NewerTech/MXPCIE6G2S2/

  https://eShop.MacSales.com/item/NewerTech/MXPCIE6GRS4E/

  https://eShop.MacSales.com/item/sonnet%20Technologies/TSATA6PROE2/

• What Type of PCMCIA is supported by Equium A200-1ED?

  Hello

  They gave me this old Equium A200-1ED which is too slow for window 8.

  Putting aside the expensive option of a SSD, I thought to install windows on an SD card but the BIOS do not see it as a boot device and the driver seems not to recognize as exFat and even then it only reads that 27.7 GB on a 64 GB card.

  So my next option is to get an adpater for the ExpressCard/PCMCIA location for the 64 Gb SD card that I hope the BIOS will be able to see as boot drive, but I don't know what Type (PIN configuration) of the card supports this machine slot.

  The driver seems to think that he supports PCMCIA, but I know that it is not a Type II, because I have a Type II device that does not fit into here.

  I don't want to open it, so I wrote to Toshiba, but I didn't get any answer.
  So maybe someone here can help.

  Any ideas?

  Thank you

  PCMCIA is designed for the use of some external devices, but the idea to use the preinstalled with OS boot device is really crazy. I'm pretty sure that this will not work.

  A few years ago, I had Satellite A200. It is the same model as your satellite. If you want to have good enough laptop s performance I recommend to install Windows 7 32 bit. This machine was designed for Vista, but it is supported for Win7 32 bit. WIN8 isn't the solution for this old piece of hardware.

  With Win7, it works fairly well, stable and faster than original Vista. SSD is very good way to increase the performance of s for laptop, but it costs a little. Anyway, you shouldn't buy the best and most recent SSD. You can get an opportunity for a lot of money.

  Anyway, combined with mise a niveau of RAM and Win7 installation is, in my opinion, best option for you.

• What mini PCI WLAN card can be used on Equium A60 - 157?

  Hi, im trying to buy a wireless mini LAN card pci for my toshiba Equium A60-157... do not know what an I need or I can use? Thanks Carl

  Hi Carl

  According to the specs of your device is not ready WLAN. This means that you can not switch on the unit with the mini PCI WLAN card. Only solution is the card PCMCIA or USB WLAN stick.

• Equium A60 BIOS update: what is the Boot Mode?

  Due to problems with my graphics ATI I have to do a BIOS update. To do my computer (Equium A60 PSA67E) apparently needs to be in mode 'start-up', NOT 'repeat mode '. In a previously sent forum somebody said the computer just "should be turned off" but I'm still not sure of how go to this mode. Is it just a case to go to the start menu, click on shut down the computer and turn off the computer again? But how do you know when it is in mode 'start '?
  Question: How do in boot mode? (I tried the update in 'safe' mode and it does not work)

  Hello

  Boot mode is meaning stop the laptop (BONE).
  It is important that the laptop is not in stand mode or hibernation mode.
  You just simply close the unit. That s all ;)

• Update the Bios Equium A60 - 155 failed - what to do?

  Hello

  Recently one of our engineers tried to upadate an Equium A60-155 Bios failed.

  Now, the laptop wont even post you turn it on and it shuts down striaght away.
  What are the methods for resetting the Bios?

  This requires a seiral loop back plug it or are there other methods to remove it.

  Hello

  If the unit doesn't start at all it probably the BIOS chip is damaged. In this case just service can help. Sorry, but I'm afraid that you can't do anything there.

• What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  I have a PCI 6519 data acquisition card. I want to install it on the PC and use it outputs to control a robot. I have problems with the connections to the terminal block which is attached to the cable.

  What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?