Equium A80: PS2/USB adapter does not work correctly

Similar Questions

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Microsoft Teredo Tunneling adapter does not work correctly and my pc works too slowly to start and stop.

  Original title: hardware device

  Please help me...

  My Microsoft Teredo Tunneling adapter does not work correctly... I tried to reinstall it but it is impossible to install...

  So what to do so adpter may work correctly...

  And my pc runs too slowly (at startup and shutdown also)

  Help help me soon...

  Thank you...

  Hi Harshhh36,

  Usually, after the computer restarts, the drivers install automatically and it will stop the errors.

  You can also refer to the computer or the network card manufacturer's Web site to download and install the latest version of the drivers for the network card.

  You can also check in the updates of windows updates available for the network adapter driver.

  For more information, see the article:

  Automatically get recommended drivers and updates for your hardware

• WiFi adapter does not work correctly

  I want HP 4-1204TX with Windows 8 operating system and I always had the same problem with the connection using my wifi adapter. When I opened the Device Manager to search for the status of the wifi card, it says my "ralink RT3290 802.11bgn"... ". "Microsoft Wi - Fi Direct virtual adapter"... everything has the same error code which is Code 45.

  How can I solve this problem?

  Hi @FLFOO ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question on your HP ENVY 4-1204tx Ultrabook and issues with WiFi adapter is not working properly. Error codes in the Device Manager in Windows 8.1 could be fixed by removing any additional drivers. So I want to uninstall everything that is listed in the network drivers in Device Manager, reboot the laptop. Here is a list of the options in the Device Manager, it might help.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that requires an upgrade or reinstall.

  I hope this helps.

  Thank you.

• My alfa wireless usb adapter does not work and I have no internet connection. How can I solve this problem?

  Dr., Sir, I can't fix my wireless adapter usb [ALFA] Please help me how to fix this, your faithfull, Mr Hameed.

  Hello

  ·        Which is exactly the problem that you are facing with USB adapter?

  ·        You are able to go online?

  ·        Is it detected?

  ·        What operating system is installed on your computer?

  Method 1: Run the network troubleshooter and check if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: Follow the suggestions from the link and check if it helps:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 3: Solve Wired and wireless network connection problems in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 4: you can also reset the USB controller and check if it makes a difference:

  a. type devmgmt.msc in the start search box.

  b. expand Bus USB controllers.

  c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  d. restart the computer and reinstall the USB controllers.

  e. plug the removable USB storage device and perform a test to ensure that the problem is solved.

• USB ethernet does not work after update to Mac OS sierra

  Hello

  I use end of 2014 Macbook pro 15 "running Mac OS Sierra.

  Before the update for sierra, Captain, EL on OS USB ethernet has been working well, but after that the update for Sierra USB ethernet does not work, "showing the cable disconnected.

  Please advise and thanks in advance.

  Do you use the Thunderbolt Apple > Ethernet card?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  The adapter works in recovery mode?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Windows 95 Ethernet adapter does not work

  Hello

  I have created a machine virtual windows 95 and followed the instructions exactly in the link below.

  Documentation for VMware for Windows 95

  However, the network adapter does not work.  I have the latest version of VMware tools installed, but it does not seem to include any network card driver.

  I tried to download the driver for AMD PCNET Family Ethernet Adapter (PCI and ISA) from the AMD website, but that doesn't work anymore.  I have a virtual machine running Windows 95.  However, he created an image of a physical machine.  The ethernet adapter works fine on this machine, but there is no driver installed - does not require a apparently.

  If anyone has an idea on how to make the ethernet card works, I would be eternally grateful!

  Here is the configuration I have for the Windows 95 VM I created:

  . Encoding = "windows-1252".

  config.version = '8 '.

  virtualHW.version = "6".

  scsi0. Present = 'TRUE '.

  memsize = "64".

  ide0:0. Present = 'TRUE '.

  ide0:0. FileName = "7Win95.vmdk".

  ide0:0. DeviceType = 'disk '.

  IDE1:0. Present = 'TRUE '.

  IDE1:0. AutoDetect = "FALSE".

  IDE1:0. DeviceType = "cdrom-raw"

  floppy0.startConnected = "FALSE".

  floppy0. FileName = "a":

  floppy0. AutoDetect = 'TRUE '.

  ethernet0. Present = 'TRUE '.

  ethernet0. ConnectionType = "nat".

  ethernet0.virtualDev = "vmxnet.

  ethernet0.wakeOnPcktRcv = "FALSE".

  ethernet0. AddressType = 'generated '.

  Sound.Present = 'TRUE '.

  sound.fileName = "-1".

  Sound.AutoDetect = "TRUE".

  roamingVM.exitBehavior = 'go '.

  displayName = "7Win95."

  guestOS = "win95".

  virtualHW.productCompatibility = "hosted".

  extendedConfigFile = "7Win95.vmxf".

  IDE1:0. FileName = 'D: '.

  floppy0.FileType = "peripheral".

  floppy0.clientDevice = "FALSE".

  IDE1:0.startConnected = 'TRUE '.

  ethernet0.generatedAddress = "00: 0C: 29:66: ff: 4 d.

  tools.syncTime = "FALSE".

  UUID. Location = "56 4 d f3 c8 9 c 66 1 0 b - df 02 c3 6 3rd b 66 c ff 4 d.

  UUID. BIOS = "56 4 d f3 c8 9 c 66 1 0 b - df 02 c3 6 3rd b 66 c ff 4 d.

  cleanShutdown = 'TRUE '.

  Replay.Supported = "FALSE".

  ide0:0. Redo = «»

  Replay.FileName = «»

  vmotion.checkpointFBSize = "21102592".

  ethernet0.generatedAddressOffset = '0 '.

  USB. Present = "FALSE".

  pciBridge0.present = 'TRUE '.

  pciBridge0.pciSlotNumber = "17".

  scsi0.pciSlotNumber = "16".

  ethernet0.pciSlotNumber = "32".

  sound.pciSlotNumber = "33".

  Try changing line ethernet0.virtualDev = "vmxnet' to 'vlance.

  Once the AMD driver is installed and running, THEN you can try to change the vmxnet driver, by repairing the VMware Tools on the guest.

• NB200-12N - USB port does not work

  Hello

  I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
  Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
  But does not work.

  Thank you

  Paulo

  If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

  Try reinstalling the chipset utility.

  By the way: two other ports work well, right?

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• AC adapter does not work with the Qosmio F50-111

  Hello world

  I bought a Qosmio F50-111 this morning.
  The power adapter does not work on my computer (no led lit when connected), but he's working on a Satellite A300 for a working partner.
  And his power works on mine.

  I would like to know if people here have a Qosmio F50-111, the model of power that I have a model 3290-3AC3... I would like to know if it's good.

  Thank you all

  Before you expect an answer here, contact your local dealer and clarify this situation. You can also contact the nearest authorized service provider. They can say with certainty if the power adapter is one that suits or not. If you have the wrong I'm sure you get the right one for free.

• Wireless network adapter does not work on my Satellite A200

  Hello

  My wireless network adapter does not work under Vista. If I press FN + F8 nothing happens. Wireless communication is always offline.

  What can I do?

  Details:
  Typ: Atheros AR5008X Version: 7.2.0.164
  Laptop Satellite 200
  PSAE6E

  Please help me!
  Thanks in advance!

  Phil

  BIOS bug? I don t think so

  First of all, you must make sure that this isn't a hardware problem. In this case, insert the Toshiba Recovery CD and reinstall the operating system of this device. This will outline the laptop to factory settings. Notes; This would format the whole HARD drive.

  After the new installation, you must activate the WLan switch on the side of books, and you can then use the switch button FN + F8 to select the WiFi network.

  I assume that you have already configured your Wlan router. So the same settings such as the SSID, encryption of WLan, etc. must be defined on the laptop too.

• Satellite Pro L40 - wireless adapter does not work - Vista

  I recently had some problems with my laptop.
  A couple of weeks, I put in a disc of OpenSuse.
  It's not stable anything, but locked me out of my original Vista operating system.

  I reinstallled Vista Home Basic, but there are a few problems.
  Mainly, my wireless adapter does not work.

  When I flip the button to turn it on nothing happens and it is not recognized in Windows.
  I installed Atheros Driver, but still nothing happens, light is not yet.

  Any advice?

  Hello

  First check the device-> network adapters area manager
  You see the WLan card? Or the unknown device appears?

  If there is an unknown device, then the WLan driver has not been installed correctly or you tried to install a driver badly these two options are possible.

  Remember that your wireless network card? Maybe it was a Realtek WLan card?

  If it's a Realtek WLan card, try the WLan driver from the Realtek website and look for 802.11 g (RTL8187B) chip or you will simply check the page of the European driver Toshiba too the Realtek WLan driver also appeared on the Toshiba page

• El Capitan USB port does not worked well under Yosemite.

  Running a VMWARE image of the Linux kernel using a Sentinel of SafeNet USB license dongle canned.
  Has worked perfectly under Yosemite unfortunately too long to go back.

  The USB port does not work with other USB devices?

  I suspect an incompatibility with the EC and the sine of dongle USB EL strengthened using third kexts. They must be signed, and so a softer update for the dongle is probably necessary.

  http://arstechnica.co.UK/Apple/2015/09/OS-x-10-11-El-Capitan-the-Ars-Technica-re view/8 / #h1

• power adapter does not work

  I bought this point aprox. 9/10 months of Tesco, so I don't know if I have coverage?

  Printer all-in-one of HP Photosmart Plus - B209a

  power adapter does not work and I am loan owner hp printers and don't want to splash out on another.

  Help, please...

  Hello

  You should still be under warranty, but if not, you should be able to buy one from HP parts Surfer.

  I hope this helps