Equium and other laptops in general and the Usb 2 speed with stuff problems

Similar Questions

• My HP 14 laptop is not recognizing the usb ports and wifi at startup.

  During the last few days I been dealing with the issue that my laptop does not recognize the usb ports and wifi. After several reboots, it works fine. My drivers are up to date, so I don't know why, I'll have this terrible problem.

  Welcome @hildergarn,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi and USB ports on your laptop from HP.

  My first suggestion would be to use the wireless network troubleshooting and Internet tool. At the bottom it will ask you questions to help you diagnose the problem.

  Please take a look at this great Charter called troubleshooting wireless network and Internet. This document will help you to solve the problem of Wi - Fi.

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  You have uninstalled the driver in Device Manager?

  Please try to uninstall the driver in Device Manager by using the following steps:

  • Go to the Device Manager.
  • Expand network adapters.
  • Right-click on all NICs individually.
  • Click on uninstall.
  • Restart the laptop twice.

  How many devices you try to connect?

  What you are trying to connect via USB?

  Are - what you happened to try to use the HP Support Assistant?

  Here is a link to the HP Support Assistant, if you not him have not yet tried. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Here are other troubleshooting steps that may help too. If the USB device does not appear in Device Manager, then it might be a question of power requirement. Unplug the machine and perform the following steps until the device is detected:

  • Reboot the laptop

  • Plug in and wait five seconds.

  • If the device does not appear, try connecting to another USB port.

  • If the USB device is displayed in Device Manager after you connect the cable to a different port, then uninstall and reinstall the software of USB device driver.

  If the device is not recognized in any port, unplug it and go to the next step.

  • Open the Device Manager.

  • Double-click Bus USB controllers,

  • Double-click on a USB root hub,

  • Click the Power tab

  • Click on properties of power supply (if it is displayed).

  Devices need that are connected to the hub are shown, as well as the power they have. If the total displayed power is more than 500 mA, remove the devices and use a hub powered.

  • Continue looking at the properties of the power of each USB hub. If the total power required exceeds the total available power for the hub, then remove a device on this hub to a decrease in the number of consumption.

  • Plug in and wait five seconds. If the device is not recognized, unplug and go to the next step.

  Please note; Remove USB cables at high speed that are more than 3 m (9.8 ft) in length and use cables at high speed that are shorter than 3 m.

  Source: troubleshooting USB connections - please look at this document and follow all the steps in it.

  When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If please re-post and let me know the detailed results of all the troubleshooting steps in this post. Could you please provide me with your model number (How can I find my model number or product number?) also.

  Can't wait to hear from you!

  Have a great day!

• For the USB Hi-Speed and Licensing policy GPIB controller

  Hello

  I wanted to confirm understanding licensing NI VISA.

  If I use the GPIB controller OR to the USB Hi-Speed, is NEITHER VISA license are included?  488.2 NOR pilot is that CD is included along so I guess its license.

  In accordance with the licensing policy as long as you are using hardware NOR the license included.

  Here is the sentence that does this is clear.

  "Are examples of products that include the driver NI-VISA LabVIEW, CVI, TestStand, NOR-488. 2, GPIB controllers, PXI controllers, etc. If you do not use a software or hardware, you can buy NI-VISA development software separately. »

  If my understanding is 488.2 and NI-VISA OR license is included if you use the NI GPIB for Hi Speed USB controller.

  Thank you

  ANI

  It's true and you can deploy a runtime of NI-VISA smaller with your executable file.

• Epson Stylus Photo R2880, tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors

  Tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors. Printing through the standard power supply is perfect. Thanks in advance for your help.

  Standigay

  Tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors. Printing through the standard power supply is perfect. Thanks in advance for your help.

  Standigay

  Hello

  This looks like a good question for the support of Epson.

  Help and Support - Epson America, Inc..:
  http://www.Epson.com/cgi-bin/store/help/help.jsp?BV_UseBVCookie=Yes&category=products

  Concerning

• My touchpad does not work and the usb mouse works

  After connecting with a USB key, my touchpad does not work and the USB mouse works

  Hi, Dieudonné,

  Make and model of computer?

  Have you tried to uninstall the drivers for the touchpad.  Update?

• How to use Apple time machine to back up multiple pc, I have an ipad, hp (WINDOWS 7, AND the door of ENTRY WITH XP

  How to use Apple time machine to back up multiple pc, I have an ipad, hp (WINDOWS 7, AND the door of ENTRY WITH XP

  Hi David,

  Time Machine is a backup utility in built for the Mac operating system that works with your Mac and a (sold separately) external hard drive or Time Capsule airport. You can go through the article to get the idea of base on the application.

  The basics of the Mac: Time Machine

  http://support.Apple.com/kb/ht1427

  You can go through the items in the link for your reference.

  Time Machine

  http://www.Apple.com/in/support/TimeMachine/

  I suggest you to contact the Apple support forums for help on the issue.

  https://discussions.Apple.com/index.jspa

  Do not hesitate to contact us for any information related to Windows.

• Laptop does not recognize the usb mouse or the internal speakers.

  The laptop does not recognize the USB mouse. I have re installed the drivers from the site of the constructor (HP), but it still does not work.

  In addition, the internal Laptop speakers no longer work. There is no sound coming out of the laptop and it does not recognize the external headphones plugged into the headphone jack.

  I ran several troubleshooting utilities (audio playback, FixIt) and they are no help.

  Hello

  Thank you for keeping us posted.

  Sorry for the late reply.

  I imagine the inconvenience that you are experiencing. However, I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  How to use the tool File Checker system to repair missing or corrupted system files,

  Please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article describes how to run the system (SFC.exe) to File Checker tool analyzes your system files and to repair the system missing or corrupt files in Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  If the problem persists, follow method 2

  Method 2:

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft, security scanner please follow the steps in the link provided below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.   

       

  If the problem persists, follow method 3

  Method 3:

  I suggest you try the steps from the following link and check if it works.

  No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For the problem with the USB mouse, there could be a possibility that there is a conflict of material with the mouse.

  I suggest you to try some other USB mouse with the laptop and check if it works.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

• I have a new Toshiba laptop and the keyboard is equipped with a blue trackball (mouse) in the middle of it and I'm looking to disable

  I have a new laptop Toshiba and when I type my cursor will move to a different place at random.  The keyboard is equipped with a blue trackball (mouse) in the middle of it, and I think that it may cause the problem.  How can I disable it?   I don't want to disable my mouse pad, just the blue ball.

  Thank you

  Georgette

  Hello

  Check with Toshiba Support, their drivers and documentation online and ask in the forums of Toshiba.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  There may be a program that runs in the tray near the clock in the bottom right that controls the
  device. Some Toshiba models have the keys of the map at the top of the screen (move the mouse all the way to)
  up to see if your model has this feature) which allows control on some devices. Some models
  have (usually indicated on the key cards) shortcut keys that control input devices.

  If nothing else works, try Control Panel - double - mouse and other pointing devices - devices Manager
  Click the device - driver tab - Disable. I would use this as last resort than the other options possible
  allow you to activate and deactivate the device much easier.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• fan stays on too long and the battery level decreases rapidly: any problem identified?

  Fan stays on too long and the battery level decreases rapidly: all identified cause problem or possible?

  MacBook Air mid-2013

  OS 10.11.13

  Processor 1.7 GHz Intel Core i7

  8 GB of DDR3 memory at 1600 MHz

  Thank you, Paolo

  Hi Paskowski,

  Can you give us a little more information about your problem?  What applications or processes are you using when you encounter the problem with your fan and battery?  The activity monitor application can provide you with some basic information.

  Use the monitor activity on your Mac.

  The resources below provides general information on how optimize the battery life and troubleshoot the battery on your MacBook Air.

  On batteries for laptops Mac

  Take care

• external hard drive and the USB does not

  When I connect my external hard drive or my USB which do not shown anymore.not or work

  Hello

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  If a PC and if necessary the embedded USB can be disabled and a USB card can be used only
  is not expensive. For a laptop, using a real computer shop (no leeks and glances at a Best Buy
  or other stores) or system manufacturer support.

  ------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• privious page arrow and the box for websites with dropdown disappeared fom my opening page

  my opening page counts Yahoo search with any of the other boxes. I can't go back to the previous page or find a web site without going through the main site through Yahoo search. I thought it was a problem with Yahoo (it's my opening page), but they say it's Firefox.

  Make sure that you are not running Firefox mode full screen with all the hidden toolbars.

  • Press F11 to toggle mode full screen (file/Firefox > fullscreen)

  If the menu bar is hidden, then press the F10 key or hold down the Alt key, which should make the convening of menu bar.

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars".

  • Is he missing elements then open the window customize via "view > toolbars > customize" or "Firefox > Options > toolbars»
  • If a missing element is located in the toolbar palette and then bring her back in the window customize the toolbar
  • If you don't see an item on a toolbar and in the toolbar palette, then click on the "Restore default" button to restore the default toolbar set up.

  See also:

  • http://KB.mozillazine.org/Toolbar_customization
  • https://support.Mozilla.com/kb/back+and+forward+or+other+toolbar+items+are+missing

• Password problems and the slowness of IMAP with BTYahoo

  After changing POP IMAP, I experience slow responses (including Thunderbird does not) and repeated messages to change my password. My work around is to remove all the password stored in Thunderbird, close and re - open Thunderbird, enter my existing password and get Thunderbird to save him. Also, I have to enter my password when sending emails. After this Thunderbird works well (but very slow to get new emails) for a few days. Then I get a message that my password is not accepted and to enter a new password - which none are accepted. My impression is that this message occurs when Thunderbird updates draft records, sent or deleted from the server. Encryption with the server synchronization problem?
  When things work, on the opening of Thunderbird the new e-mail list is displayed but cannot be opened for some time. During this wait, Thunderbird does not not msg occurs if I try another action such as moving a slider to see an old email.
  Any suggestions on how to solve my problems?
  Tony Carmona

  TonyCaporn said

  After changing POP IMAP, I experience slow responses (including Thunderbird does not) and repeated messages to change my password. My work around is to remove all the password stored in Thunderbird, close and re - open Thunderbird, enter my existing password and get Thunderbird to save him. Also, I have to enter my password when sending emails. After this Thunderbird works well (but very slow to get new emails) for a few days. Then I get a message that my password is not accepted and to enter a new password - which none are accepted. My impression is that this message occurs when Thunderbird updates draft records, sent or deleted from the server. Encryption with the server synchronization problem?
  When things work, on the opening of Thunderbird the new e-mail list is displayed but cannot be opened for some time. During this wait, Thunderbird does not not msg occurs if I try another action such as moving a slider to see an old email.
  Any suggestions on how to solve my problems?
  Tony Carmona

  It turns out that my problem was due to an interaction of the Thunderbird and McAfee antivirus. That has been fixed to be scanned and attached to an incoming mail causing Thunderbird does not Msg. Power analysis of attachment of the fixed e-mail off my problem
  Tony Carmona

• Ground and the USB-8451-&gt; it should reference?

  I use a usb-8451 attached to a PCB card which has its own means with separate analog and digital designs. When I join the 8451 grounded strange results of power supply occur. Is it allowed to leave separate and unconnected?

  Devices USB usually get their power supply (+ 5V and GND) of the device, they are connected. There is no need of additional connections to GND. These additional connections can lead to "mass loops" that can pick up noise and cause errors. -The 'front end' of a device properly designed USB is isolated from the power supply. If you connect anything to the input of the USB device, use the GND or NOT the entrance terminal, of reference and NEVER the Terminal GND of the Board that powers the USB device.

• I am trying to install the following hotfixes 4 KB973593, KB973704, KB975960 andKB974561 and I keep geeting a 646 error. I have the firewall off and Norton AV off the coast. Also, I ran the software tool Milacious with no problems.

  None

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• The selected file cannot be linked because there 6 audio channels, and the clip was created with 2

  I tried to link the MTS files to a project that I have edited with AVI files. I got the message "the selected file cannot be bound because it has 6 audio channels and clip was created with channel 2/channel" audio. Does anyone know what I need to do?

  I had this problem and the cause in my case, it was that I changed all my clips in the project are mono audio channels. When I tried to swap the originals with proxies, I did, I had a similar message for the clips that have been affected by the designation of channels. I opened the project and selected all my media items in the project window and changed all the audio back to 'use the file' and that did the trick for me.