Equium - dead after hibernation, the system recovery does not work

Similar Questions

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unexpected error in the property page. The VSS service uses the system restore does not work. Error (0 x 810000202). __

  original title: "there was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information, see the journal of events (0 x 810000202). __

  "There was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information see log of events (0 x 810000202).

  Please try the troubleshooting below to check the status of the shadow copy Volume service

  1. click on start > all programs > Accessories > run

  Type the following text in the run window, and then click ok:

  Services.msc

  You will get the Services window.

  2. Please check service Volume shadow copy service is "started" and "automatic".

  If these services are not set to "Started" and "Automatic", please, do a right-click on the service and select "Properties".
  On the window properties, please change the startup type to automatic, and use the Start button to start the service.

  Click on apply, click ok.

  Close the Services window

  Restart the computer and check if the problem occurs again.

  If the problem persists, start your computer in safe mode and try to do a restore of the system again. Temporarily disable your anti-virus protection

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  I hope this helps
  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite A200 - 19L: no sound after hibernation & CD/DVD drive does not work

  First of all, my laptop computer became very slow loading vista after formula 1 week to buy it.

  Second, sometimes when I put the mode 'sleep' a revival of the laptop, there is no sound and a red circle appears over the speaker icon in the bar of tasks, and when I go into control panel > Sound, he tells me that no. his drive was installed and when restarting the laptop the problem resolved?

  Thirdly, after the formula of the week 3 buy the computer also dvd - cd player has the same problem, like the sound and when you open my computer that NO cd\dvd drive icon and when I put a cd or dvd, it does not work or run and it happens all the time, even if the laptop restarts.

  Since then im able to watch movies or work.

  I'm lost and I don't know what to do!
  (Sorry for my bad English, but I hope you understand the problems)

  Hey Osama

  I think I can help you. The questions that appear on your laptop are not serious and the only one associated with software or registry.

  Regarding your noise problem:
  Please check this Microsoft document
  http://support.Microsoft.com/kb/929685/en-us
  or
  http://support.Microsoft.com/kb/937077/

  the MS update must be downloaded and installed ;)

  Regarding the missing CD/DVD drive;
  I think you should try to remove the drive from Device Manager and reboot the laptop. Then the operating system should recognize the STRANGE again.
  Secondly you should access the registry editor and should remove the upper filter and bring back the key filter
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Recommend checking out:
  http://support.Microsoft.com/kb/270008/en-us

  best regards and I hope that I can help you

• System recovery does not work?

  I have a HP Pavilion dv2910us, and I need to perform a recovery system on my laptop. I tried to press F11 when the computer starts, and it does nothing except it emits a loud beep and continues on its way, commissioning. So when it does not work, I came across the site of HP to look for another way may be to perform a system recovery that I never knew. I found that I can open the Recovery Manager in my Start menu and run the operation there. I tried about 15 times, following the specific steps that were given to me and even another way, that I found on the forum. All that happens is my computer restarts and I get into my account and it's the same as it was before. I really need perform this system recovery. I already moved the files that I need to save to an external hard drive, and I really need to solve this problem. What I am doing wrong, or how do I restore my laptop to factory in another way?

  Additional information: my product number is FE989UA #ABA and the series is 2CE8200Y5Q.

  Message edited by snowshoe on 24/07/2009 22:36

  sha3ko wrote:
  I have the same problem, and from what I know, if you have upgraded or downgraded your computer (in other words, if you reinstalled the operating system other than the original) it will cause corruptions on the recovery partition in drive D. I tried to find a way to retrieve the recovery partition, but it seems that there is no way unless you are a computer genius. My final solution just order a set of hp recovery disks, but I'll try that before I pay for it. Good luck with yours.

  Try this >

  1.right - click on the "Computer" icon and select manage.
  2. This will launch the Microsoft Management Console.
  3. on the left side of the MMC console, click "Disk management" and it will show you all the partitions.
  4. right - click on the "HP Recovery" partition and select "Mark as Partition Active."
  5. when the warning message appears, select 'Yes' - restart the notebook and it will automatically start in the Recovery Manager without having to press F11.

• February 25, 2015, after agreeing the Firefox Hello does not work dwhelper. All proposed tests without success.

  I was download Firefox Hello a couple of days. dwhelper no longer works. I tested the extensions. As I only have two, dwhelper and add-on, it was easy to do.

  I use a lot dwhelper. I use online videos from many sources for my physics and astronomy, teaching needs.

  It is a problem with many video sites, not just YouTube.

  I deleted dwhelper and reinstalled. Firefox started and stopped. Rebooted my macbook pro as well.

  Program seems to be working and including window specifying the location to place the download file.

  Hello from Firefox is not a separate download - its share of Firefox itself. There is no direct interaction between your navigation and the morning of Firefox.

  It is more likely that Firefox updated to the latest version, and something in the change means that dwhelper does not work as well. I suggest you ask on the support site of the developer of the extension http://www.downloadhelper.net/documentation.php

  According to support threads this thread, there is also a beta version available that could solve your problem.

  Unfortunately its hard for us using extensions, they are developed by third parties.

• Qosmio modem: after update the modem driver does not work

  Qosmio F10-145 with WSP2 MCE.
  Yesterday, I installed Phone Dialer Pro. Then, I realized that the microphone did not work with this program.
  The help file suggested upgrade modem driver that I then downloaded from the Toshiba site.
  It was the last time that my modem was working.
  I tried everything: from the update to restart in SafeMode as administrator, remove the driver and reinstall it from the Tools CD, use SFC and all I get is an 'access denied' message at the end of the installation process.
  System Restore doesn't work anymore as the last point of available restoration after the "Reinstall".
  I called help line of Toshiba which suggested resettlement of the entire system using the recovery CD... That would take days (programs, updates, mail files + digital certificates...).
  The last option that is somewhat like a spare wheel, as it has to install an external modem PCMCIA. This worked well but is frustrating because there is a modem already installed.
  Also, why don't I have any problem installing external modem, but cannot install one that is already there?
  Any suggestion?

  [Edited by: admin on 24 June 05 19:18]

  Hello

  As far as I know Toshiba Software modem is connected to COM 3.

• My system recovery does not work

  Hello
  I have an e-machine computer with windows xp. I want to recovery s sytem to completely wipe my computer and bring him back to the original configuration. When I put my cd/dvd for system recovery, all right after that I restart until it comes to the loading screen for the recovery of the PC Angel system. After that it is trying to load the computer ends by crashes and I can't start the recovery of the system.

  WHAT DO!

  Thank you

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Link above is to the XP newsgroups.

  There is a list of groups of discussion XP to the bottom of the left column.

  http://www.eMachines.com/support/product_support.html

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• I have the same problem. When I do a system restore, I get an error message. The service of shadow copy of Volume used by the system restore does not work. Error 0 x 81000202

  My security service center cannot be started too.

  Hello

  Malware scan

  malware stops normally you use the system restore protect themselves remove you

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  7.  

  and try to do a restore mode safe

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  7.  

  and if using norton disable product anti-forgery protection

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

• Microsoft - accidentally not uninstalled games not in the Recycle Bin, lost the system restore does not work

  Hi I have uninstalled a few programs and lost microsoft games in the process, have tried the system restore and cannot find them in the Recycle Bin, restore says system 0x8100001A and 0 x 810000101 code

  Hi I have uninstalled a few programs and lost microsoft games in the process, have tried the system restore and cannot find them in the Recycle Bin, restore says system 0x8100001A and 0 x 810000101 code

  Assuming that yoy are using Vista...
  Suggestions:

  1. start > all programs > scroll down to find GAMES > open it. MS games still appear? > If Yes, click on one of them > it does not open and it works?

  2. see if this Microsoft Support can be applied to your situation:
  http://support.Microsoft.com/kb/940263 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• The system image does not work on win7 Home Premium HP Pavilion Elite HPE 250f

  The system image (and Windows Backup with and without Image system options) just do not start with the same error message indicating insufficient space for "Volume Shadow copy".

  HD has about 100 MB for the operating system and other files more about 11 GB for HP Factory Image.  Trying to backup to an external drive, Iomega USB with 650 GB of capacity.  External hard drive now empty but has been used before.

  HP support has no answer!

  April 24, 2013

  Just thought I'd give you the answer to this old problem.

  Windows 7 (for earlier versions) work as described in the help of the screen except that the VSS mode

  must be turned on.  This allows Windows to actuall save parts of the operating system

  Although these parts are involved in the actual backup.

  Shame on the HP technical support for not knowing this.

  In addition, the original tech support suggestion was to call Microsoft.

  With a new HP PC you have no direct support from Microsoft (free).

  It took me a while to work with Paragon Backup (wonderful product) to realize that VSS

  must be enabled in the operating system for these virtual backup features to work.

  {Information}

• XP will not acquire an IP address. Start tcp/ip and obtain the dependency service error. Public static IP and the system still does not work.

  This system was given to me the difficulty.  It is clean of viruses and spyware, it was at a time given some.  Now unable to connect to any type of network, IPs as 0.0.0.0, will not be renewed.  Get dependency errors when I try and start TCP/IP.  I reset the winsock stack.  Any suggestion at this point would be useful.

  Hi MarkReeves,

  1. What is the accurate and complete error message?

  I suggest you try the steps from the following links in the article and see if it helps:

  The network status icon may display a message 'Acquiring network address' after an address is already acquired in Windows XP Starter Edition

  How to reset the Protocol Internet (TCP/IP)

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  I hope this helps.

• Helpctr.exe does not load in the Start Menu. System Restore does not work.

  Help and Support not be loading not on the Start Menu. I get a msg of error helpctr.exe is not found. I run for the file with no result. Also the system restore does not work even in safe mode. I use XP Home SP3. Any suggestions? Thank you.

  No problemo!

• Envy of HP dv7-7332ea - System Restore does not work on windows 8

  Hey there,

  I recently bought this machine about a month ago. I used the Windows 8 System Restore feature to restore my pc to a previous state.

  However, after running it, I got a message saying: it failed and to ensure my anti virus is disabled. Accordingly, I have disabled Norton and tried again but it still does not work.

  Previously, the only problem I had with the pc was that he locked himself completely and therefore I turned off the machine that I have been unable to close.

  When I rebooted, HP Support Assistant could not run and so I uninstalled and then reinstalled from website theHP. It is now resolved. The thing is I'm a little scared that something is wrong with the machine that is the reason why I think that the system restore does not work.

  I'm a newbie on the computers here. Could you please give me some advice to diagnose if there is nothing wrong with my machine and fix the system restore?

  See you soon,.

  Damon

  Hi Damon,

  Norton is a component called 'Tamper Protection' that should be disabled before a system restore can be performed - for more details on this topic, see the following link.

  Disable self-protection.

  Kind regards

  DP - K

• System Restore does not work, once again.

  Hi, I read a topic of 2010 that has not yet been answered. I worked with a tech at Microsoft by e-mail, but when I answered: System Restore didn't work. Now it does not work yet. I had installed Returnil system safe, but I got an error msg 0 x 80004005, (third-party antivirus), so I uninstalled the program. I went through the registry and delete something with Returnil all 4 sections of the registry. Remove the common files folder that was left after uninstalling. Restarted my computer several times. I use MSE, with free versions of spywareblaster and MBAB, who are both at the request not in real time. I tried to restore to a time before I had installed Returnil first, (I installed and uninstalled 3 times in 2 days) and could not. I tried to use a snapshot to restore spywareblaster and managed to restore to the point 2 x before installing because forward the installation of point returnil has been altered. At the moment no malware has been detected and no threat of MSE. What to do next?

  Thanks in advance for any help. Liz.

  Here's my usual route to find out how to reinstall System Restore:

  If you have already run MBAM and SAS, temporarily disabled your antivirus and anti-malware applications and tried your Safe Mode system restore and you still get the restoration of the system to work, you must reinstall just your system restore.  You do not have to reinstall XP - just reinstall the system restore part.

  System Restore is a frequent target of attacks by malicious software.

  When you reinstall the system restore, all your current Restore Points will be deleted and you must restart your computer once the installation is complete.  After the reboot, a new Restore Point will be created as a new point of system control in your calendar of SR.

  If your system had a malware infection, it could be that some of the files in your old Restore Points are also infected up to wipe out the 'old' and new is often a good idea if you wonder if the old Restore Points are infected or not.

  Assuming that your XP is installed on drive C of your computer:

  As you go through the reinstallation of the RS, the resettlement will be asked to locate certain files as you go along and ask your XP installation CD.   If you do not have a genuine XP bootable installation CD, you can change the path where Setup looks for files one at a time, because they are needed.  More on that later.

  Navigate to the following folder:

  c:\Windows\Inf

  Locate and right-click the following file:

  SR.inf

  Choose Install

  If you can not see the sr.inf file, set up your system to show hidden files and show file extensions.

  Click on tools, Options, view and turn on "Show the hidden files and folders" and uncheck "Hide extensions for known file types", then you should be able to see the file c:\windows\inf\sr.inf.

  Installation can request files from the c:\windows\inf\386 folder.  It would be your installation CD bootable XP genuine if you have one and the Service Pack installed on your system must be the same as the CD that you will use.

  You don't need absolutely a CD to do the reinstall, because files must already be on your system somewhere if SR was working before.

  If you are prompted for a file, and you can't find it where I suggest in my example below (it works on my system), you need to search your hard drive and find where the files on your system.

  If the request to a file and you don't know where he is, let waiting for installation and click Start, search, and search for it
  has requested the file and find it on your system.  If SR has already worked before, the file is already on your system somewhere.

  Search finds the requested file, go back to the installation and specify the path where you found the file requested and click OK.  Installation can request several files along the way, but you can find them all.

  Here's how my system works when I reinstall SR when I pretend that I don't have a genuine XP bootable installation CD:

  When you are asked:

  SR.sys

  Point the install in c:\windows\system32\drivers

  When you are asked:

  c:\windows\system32\srclient.dll

  Point install it in c:\windows\system32

  When you are asked:

  Filelist. XML

  Point of installation at c:\windows\system32\restore (or c:\windows\ServicePackFiles\i386)

  When you are asked:

  srframe. MMF

  Point installation c:\windows\system32\dllcache (c:\windows\system32\restore)

  Once installation is complete, you will receive a message that you must restart your computer.

  Restart your computer and look at your schedule of SR.  You should have a new point system control in your calendar.

  When you get SR working again, I ran MBAM and SAS to make sure that your system is reasonably clean of malware.

  The day that you think you need to help the system restore you is not the day to discover the system restore does not work, then you need to test.

  After the reinstallation, manually create a Restore Point and test the restoration process and make sure that you are convinced that it works from one end to the other.