Equium L10: How to use Toshiba Recovery CD to install the OS

Similar Questions

• Satellite Pro L10 - how to use product recovery?

  I've had this laptop for a while, it was done incrementally over the years and now seems to have abandoned completely.

  I can barely open anything without being invited to what program I want to open it with, and web browsing becomes almost impossible.

  I have all the product recovery discs but when I try to use following the instructions 'Insert disc in drive, turn on your PC while keeping the key C' nothing happens, after all a bunch of Eman windows continues to load.

  I'm close to throw this thing out the window (I live in a 3rd floor apartment) but cannont afford a replacement. If anyone can offer me some advice much whatever it is I would be very happy.

  Thank you

  Hey Buddy,

  If I understand you just want to reinstall Windows. Is this good?

  Therefore, you must use the Toshiba recovery disc. As far as I know the old Satellite L10 there is no option of HARD drive recovery, by pressing the C key will not help you.

  So, put the Toshiba Recovery disk and boot up your laptop. Then, go into the BIOS or BIOS boot menu and choose Start from the CD/DVD drive.
  The CD starts and you can reinstall Windows :)

• How to use product recovery CD-rom?

  How to use product recovery cd-rom on the satellite A40 range?

  Hi Daniel,.

  To use the recovery CD, simply insert the first CD (assuming there are two) in the CD drive and then just turn on your laptop while pressing the 'C' key on the keyboard. This will cause the laptop to load a minimal operating system on the CD that will start the process of recovery of the product.

  You should also be an initial menu that asks you if you want to do a complete system restore or restore 'Expert'. The full restore will delete all of your 'C' drive and will then install the entire system (excluding all the extras you'll have to install afterwards). The recovery of 'Expert' will allow you to partition your hard drive before you install the operating system in the C"" drive.

  Kind regards

• NB 300 - error when using TOSHIBA Recovery Media Creator

  I wanted to create a media recovery since the purchase of my NB300 but when I use the TOSHIBA Recovery Media Creator, once the State comes to halfway it comes up with an error:

  Differences where found in the following files.

  The source path:
  D:\HDDRecovery\SWImg\10758XSP3. STORMWATER MANAGEMENT

  Target path:
  E:\ZZImg\10758XSP3. STORMWATER MANAGEMENT
  (Error code: 02016F-3 c-00000000)

  Can someone help me with this problem

  Any help is appreciated
  Thank you in advance

  I found a similar question on the Toshiba U.S. forum > click HERE.

  I also think that the recovery files are corrupted and you need is original Toshiba recovery DVD.
  Is that you get to laptop with OS preinstalled and you should be able to create recovery discs. Try to contact the closest service Toshiba and explain the situation. If you didn t change anything on the system is not your fault and maybe you will get the discs for free.

• How to use data recovery in memory of "D"? The computer did not contain a wrioter of C/D, so I couldn't make a recovery disk.

  How to use data recovery in memory of 'd' (about 10 GB)?

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask your manufacturer of computers for the EXACT method to restore to factory settings.

  This isn't their recovery process, Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• I have 5 html pages that share a common header, footer and sidebar. How to use my navigation bar to change the content of the body without duplicating a lot of code?

  I have 5 html pages that share a common header, footer and sidebar. How to use my navigation bar to change the content of the body without duplicating a lot of code? Thank you!

  Read the help section of DW on models.

  Using Dreamweaver | Creating a Dreamweaver template

  Or use Server-Side Includes

  Nancy O.

• How to use reveal all this without losing the work of culture?

  My workflow is to editing and cropping of images. I need the flexibility to perform any order.

  When I use the crop tool, I continue to delete the cropped Pixels unchecked. When I edit the images I want to edit the complete picture, not cropped image.

  If I use reveal all to make alterations on the full image after cropping, I lose my job of cropping. Is there a solution?

  How to use reveal all this without losing the work of culture?

  How to take a bath without getting wet?

  Enter drollery side you could use a path of access to store the current size before calling "Reveal everything", then later on the path as a selection of load, switch to the crop tool and hit.

  Or convert to smart object before you crop, then do the editing in the SO (it could be a potentially significant increase in file size, however).

• Satellite P100-188: recovery CD will install the SATA drivers on a blank HARD drive

  I was wondering if someone could tell me if my recovery disk would be automatically installs the drivers for SATA HDD on my P100-188, in the case of a hard drive failure total without needing a floppy drive.

  I've never had to use my recovery disc (touch wood), but I have the impression that it works in conjunction with a hidden partition on the hard drive in order to reinstall the operating system if and when necessary, I am not mistaken? If I'm so what happens if the hard drive is destroyed and a new disk? A

  s Windows is not integrated SATA drivers I've read on the Internet that would stop dead in its tracks installation if you do not have a diskette at hand drive.

  Someone had to deal with this problem?

  Hello

  Yes, the restore CD installs everything you need in a single step.

  The point is that the Toshiba Recovery CD is not the same as an original CD of MS Windows. The restore CD contains an image. It s a Pack that included OS Win, Toshiba drivers, utilities and software tools extra.

  So, using the CD recovery will install all the applications mentioned, as well as the SATA drivers ;)

  Welcome them

• Oracle 11 g RAC 2: How to resume runInstaller to continue to install the grid?

  People,
  
  Hello.
  
  I want to install Oracle 11 g RAC 2 with 2 Virtual Machines (rac1 and rac2 which BONES are Oracle Linux 5.6) in VMPlayer.
  
  I've been installing grid Infrastructure using runInstaller from step 1 to step 9/10 in rac1 and rac2 VM.
  
  After the finish by running the root.sh script in VM rac1 and rac2, the computer is off automaticall because I do not touch the keyboard for a long time. When I take the computer, runInstaller Wizard is gone. My question is:
  
  How to resume runInstaller to continue to install the grid?
  
  
  Thank you.

  Hello!

  You can not resume runInstaller.

  You must erase you envinronment and try again.

• I use 1023TX dm4, and I install the windows 8, it have problem ATI display driver

  I use 1023TX dm4, and I install the windows 8, there is an ATI driver problem, I have two screen, one intel, and one is ATI. but ati driver does not, I need to turn off, can you help me?

  Hi Tomiko094,
  
  More than likely HP won't to material support for W8 on any system purchased before October 1, 2011. Most of the W7 drivers will work W8.
  
  Have a look here http://goo.gl/hmPRB for a document official on the update of drivers and software
  
  This document here http://goo.gl/CO6uV provides information on the upgrade to Windows 8
  
  I hope this helps.

• Satellite P200: How install only Vista using Toshiba Recovery Disc

  Hello

  I would like to reinstall my operating system using the restore disk provided by Toshiba.

  I would like to know what changes I need to do to reinstall drive so that it installs Windows Vista only and does not install all the software it comes from, as well as pilots of two years.

  Hello

  It is not possible!
  The Toshiba Recovery disk contains an image. The image is a package that contains the Windows OS, drivers Toshiba, tools and utilities.
  Using the recovery disk, you will install the whole package.

  Welcome them

• Portege R500: Cannot restore Vista using Toshiba recovery disks

  I downgraded Vista to XP loaded factory.
  However, I would now like to restore back to Vista.

  I have disc 1 & 2 ' product Recovery DVD-Rom; Portege R500 disks.
  They are also marked "Windows Vista Business (SSD/PATA)" has been provided by Toshiba.

  I don't know how to use these discs to restore my operating system to Windows Vista. When I insert disc 1 and after loading some files, a message "cannot read the file source or disk - Preinst2.SWM" and I can not go any further.

  An instruction step by step would be greatly appreciated

  I wonder why you receive two recovery disks. As far as I know Toshiba Vista Recovery image is stored on a DVD.
  Perhaps you have received two CD

  In any case, have you tried to boot from the second disk? I mean the second recovery CD?

  Usually, recovery is not very sensitive. You must boot from the disc and should follow the instructions on the screen.

  The error cannot read from the source file or disk - Preinst2.SWM looks like a little to the Conference on disarmament would not readable or the CD/DVD drive would not read the disc properly.

• How to use my recovery for re instill my sys?

  Hello

  Dear Sir

  appreciate your efforts to help me because I faced a problem with my PC and I don't have enough time to go to the Tochicha TS in our region and I asked our company that I worked to instill more surgery until I can go to the TS for this problem, but still now I don't have the time to do and I can't use recovery to deliver my PC to the first factory set with the original operating sys. I've used.

  So my Question is: How do I use my recovery re breathe my sys, but I used another version in my PC, inform:

  My lap top is: Satellite L655-18 t
  Operating system
  Genuine Windows® 7 Home Basic 32-bit (pre-installed, Toshiba-HDD recovery)

  and I'm using Windows® 7 unlimited but not yet activated because I used my series Windows® 7 Home Basic for use as a temporary solution.

  Thank you in advance.

  Ahmad

  Hello

  Generally if you want to have the factory settings again you can do this on two tracks:
  -using the HDD Recovery mode will not work if you have installed the version of the own BONE
  -using the recovery DVDs

  You have created DVDs of recovery following the instructions in the user s manuals document?

• How to use a recovery disc?

  Hello

  I just bought a Toshiba M300 yesterday and the first thing I did was create the recovery of 2 DVD disc. However, I don't know how to use it just in case I ever need.

  Whenever I put the disc in the drive it opens and I see a whole bunch of files and I don't know what they are. The recovery disk is supposed to act as a windows installation disk?

  How to use it?

  The previous forum used it well described. You must start your laptop and set up the CD/DVD as first boot device. When the facility starts just follow the on-screen menu.

  Please initialize with the number of DVD 1.

  If you have any other questions please post again.

• Satellite Pro U400-12y: how to use HDD recovery after the new installation of the OS

  Dear Sir

  I have the Satellite Pro U400-12y and give tem my friend use it when he gets back, the laptops it do format c: and reinstalled new windows.
  I try to do the recovery only by pressing f8 without answering.

  How can I recover my laptop to its state of origin as drive HARD recovery again in d:
  Thanks in adv

  Hello

  You will not be able to restore the factory settings because another operating system has been installed on the first partition.
  Usually by pressing F8 immediately after the laptop has been powered should allow the advanced on-screen menu. Here, you should choose option called repair my computer and Toshiba Recovery HARD drive.

  But if this doesn t work then you will not be able to use HARD drive recovery.
  In this case, you will need to order the new CD from here:

  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye