Equium L20-264: can I unlock the options in the Bios to change the speed of the CPU & FSB

Hello

I have a toshiba equium l20-264 today and I was wondering if I can open it the options in the bios to change the cpu speed and the speed of the fsb.

But if you don't don't do this, I already have a Dell Xps laptop Overclcoked to 4.5 ghz (twisted majorly) and I installed today a very powerful cooler and heatsink of heat inside my laptop, I'm ready to overclock bu ti do not know if I can via bios but if so could you point me to guides for a code name overclocking intel celeron m 360 : DOTHAN

Help, please

regards James...

Hello

Unfortunately, this is not possible on the laptop.

I o year owner of 3 different computers; two laptops and a desktop PC. The BIOS on the desktop is different and allows to change and increase the CPU. But the laptops BIOS does not allow to do something similar.

Why? Because the CPU overclocking would increase the internal temperature and make portable is not stable and perhaps that it would infringe the motherboards and CPU!
The notebooks run with maximum efficiency. If you compare the notebooks modules with cooling Office cooling modules you will see the difference!

Please don t waste your time and don t find any possibility to overclock the CPU and the FSB

concerning

Tags: Toshiba

Similar Questions

  • Satellite L20-173: can I put the CPU?

    Can I upgrade the cpu on my satellite L20-173 in order to play games or I can improve performance

    Hello

    No, it is not possible to upgrade the processor. It is also not possible to update the graphics card. Only you can improve memory and HARD drive.
    See the other topics in this forum, why it is not possible to upgrade the processor and graphics card.

  • Equium L20-264: can I mix memory

    Thank you all for the information about upgrading memory on the Equium L20. This I have to have 2 of the same (for example to buy an another 256) where can I buy a 1 GB and while maintaining the current 256. Or do I have to buy two 1 GB.

    Hello

    You must not have two identical RAM module. You can mix. I recommend you put slot A and smaller cotyledon in slot B.

    By the way: compatible memory for your device are
    DDR2 400/533 256 MB (PA3389U - 1 M 25)
    512 MB DDR2-400/533 (PA3412U - 1 M 51)
    1 GB OF DDR2 400/533 (PA3411U-1M1G)

    Good bye

  • Equium L20-264: how to get the restore CD

    When I bought my laptop, I him have been repackaged from a local retailer. I have been having some problems with it recently and think that I really need to do a complete restore of the system. Only problem my laptop did come with restore disks, anyone know where I can get my hands on one?

    Hello

    The recovery CD can be ordered from the ASP (authorized service provider) in your country.
    You should try to contact the guy and order the necessary CD s.

    Good bye

  • Equium L20-264, do not recognize the removable hard drive

    Can anyone help. I haven't bought a nice no notebook on the weekend and you want to get the stuff to my Lacie hard drive that I use on my mac to work on.

    Last night I plugged the drive (USB with PSU) and messages little came "new device found" then "works and is ready to use" However he didn't appear in the list of drive in the my computer window. Went to Device Manager and found it listed checked there, he worked and what everything was soft but still no joy to be able to find it or mount it or access it. I tried all the suggestions help, and eventually just turned it off.

    Also, for some reason, it lists the location as 0 istead of as USB 2 or whatever port when I plug another accessory, this would have something to do with it? I need to rename the disk or something?

    Can anyone help?

    GATS

    Hi the GATS.

    I'm not too knowledgable about MACs, but I think they use a different file for computers structure and that the files can be copied directly to a PC without first being "converted" to make them compatible. I also suspect that your Lacie is formatted to be used with a MAC, and therefore your XP operating system may not identify as a hard drive so does not show in my computer.

    I think you can get some freeware to convert your MAC files, then I suggest Googling to see what you can find.

    Kind regards

  • Equium L20-264 - how to remove the DVD drive?

    Hello

    I try to replace the DVD drive on this laptop and removed the setscrews on the base, but he didn't budge.

    There is another screw somewhere? I know that some have their screws under the keyboard, but that would need more than one? I also have a Satellite 350 and I took it easily by removing the screws located at the base.

    Any help would be appreciated

    Hello

    Please, check here

    http://www.irisvista.com/tech/

    It can help you

  • Upgrades memory battery/Equium L20-264

    Hello

    I want to improve memory my equium l20-264 to the maximum which is about 2G I think and I was wondering what parts of memory I need to do this? He currently heads the 256 MB standard, but I'm not sure if I need to replace that with a higher memory 256 AND get a new one to compensate for the amount or if I can buy a souvenir that will do the job. Is also editing them something that I can do myself or should I consider somewhere for them to do?

    The other thing is the battery life is only 1.5hours and hoped to obtain a superior capacity for her battery? Anyone know if I can do it and so what battery need and how long it lasts?

    Thanks in advance

    GATS

    Hi the GATS.

    Your laptop has two banks of memory (usually accessible by a small flap on the bottom of the unit). He must have a slot in use at present with a 256 MB card installed. New RAM modules are available in sizes of 256 MB, 512 MB and 1 GB so to get all of the 2 GB, you will need to replace the 256 MB card existing with 2 X 1 GB modules.

    The site of Toshiba UK lists all the options that are available for your model (!), but I found the options available on the following web - site: -.

    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=20877&ft=m&St=3

    I don't think it will be possible to install an additional capacity for your laptop battery and 1.5 hours you CITIES seem just to me for this model.

    Kind regards

  • Equium L20-264 - CPU upgrade

    Hello world

    I have Toshiba Equium L20-264 and I want to move into gear
    Can someone help me please?

    I had already upgraded to 2 GB of Ram, but my CPU is still 1.4 GHz.

    Please guide me what to do and if it supports several Ghz processor, which will be the best place to buy.

    Thank you.

    I assume that you have not read all the posts here in the forum about upgrading the CPU s for laptop?
    Did you?

    Some facts first:
    Update CPU is very delicate and depends on the chipset and BIOS support.
    In case one of the parties (chipset or bios) would not support new CPU, the will to power laptop on.

    Second: the laptop seems to be equipped with an Intel Celeron - M CPU, and I suppose the other Intel Celeron-M CPU be compatible:
    Intel Celeron M 370 (1.5 Ghz)
    Intel Celeron M 380 (1.6 Ghz)

    Everything supports the FSB 400 Mhz

    But guess what? Even if you add the new processor at 1.6 Ghz, the performance gain will be not noticeable. So in my eyes, CPU upgrade for this old book is useless. It won't add any performance benefits.

  • Upgrade memory for Equium L20-264

    Hello

    I have an Equium L20-264, which is "dying" and advised to upgrade memory. Specs below.

    Equium L20 - 264 part number: key features PSL2ZE-00500CAV - Numtxpackets® Celerona® M processor 360
    -Windows® XP Home Edition
    -60 GB hard drive
    -256 MB DDR2 RAM
    -15 "TFT color display
    -Drive DVD Super Multi (Double Layer)

    Issues related to the:

    1. How can I remove the existing memory? Is there a guide of the user on this operation?

    2 How many slots have?

    3. What is the max memory per slot?

    4. can I buy Toshiba memory directly?

    It is rather urgent and would like a quick answer.

    Thanks in advance
    Rag99

    Hi mate.

    As far as I know your laptop supports two memory locations.
    They must be placed at the bottom of the unit.
    If you n t know how to change this then I recommend consulted the user manual!
    The manual can be downloaded from the Toshiba European page.
    I think that the laptop can be upgraded to 2 GB of RAM. So, you can use 1 GB of RAM in one slot.

    PS: you must use the RAM DDR2 PC2-4200 memory - 200pin modules

  • Equium L20-264: unknown device PCI after Bios Update

    Hi all
    I just updated the bios on my Equium L20-264 (PSL2ZE) to V1.80.
    After restarting windows XP has detected a new PCI device but no driver for it.
    Everything seems to work and all of the devices, I expected were there.
    The name of the device is device PCI PCI\VEN_1002 & DEV_437B & SUBSYS_00000000 & REV_01\3 & 0B0C5 13 c & 0 & A2.
    Any ideas?

    Hello

    Select this device and right click and install or update the driver.
    For the source of driver, please choose this path:
    C:\Windows\System32

    Check if the driver has been found.

  • Recommended graphics card and processor for Equium L20-264

    Hello

    I was wondering which graphics cards are compatiable with equium l20-264 because I have a radeon eXpress standard ATI 200 m (waste) and wanted to update my graphics card, but I'm a beginner I upgraded my ram but really need an update for my graphics card to a lot of games for vista (you probably think how I have vista on a computer no-vista laptop ^_^)

    I was also wondering if I coould go my Proccesor to a best something like 1.0 GHZ to 2.5 GHZ but a one celeron so I don't have to get a new motherboard.

    Hello

    I would recommend not all graphics cards for this camera because it s is usually not possible to replace or update the chip graphic card on laptops.

    Upgrading the CPU would be possible.
    The CPU of the new generation of motherboards for laptop is not welded and it might be possible to remove it.
    BUT the updates are not recommended because
    -first of all, you will lose the warranty and
    -Second, the laptop could run unstable due to the higher temperature.

    However, I found a few compatible Intel Celeron - M CPU, which are supported by the motherboard:
    Intel Celeron-M 350 (1.30 GHz) FSB: 400 MHz
    360 (1.40 GHz)
    370 (1.50 GHz)
    380 (1.60 GHz)

    Good bye

  • How can I unlock the comment tool properties Add text in Acrobat XI if the verification of the lock is turned on but grayed out?

    How can I unlock the add comment text tool properties in Acrobat XI if the locking control is on but grayed?

    Please please help

    I have to work with my new Acrobat Pro XI 14 hours a day to finish my work United

    (WIN 7, 32 bit, 4 GB RAM)

    After a number of tests & hours I found a way around

    found a paper done previously to the lock option that I did for the properties 'add a text comment '.

    I then put the default property without lock

    I hope that this helps someone who has the same problem

    However adobe should fix this bug and add it to the web page of problems until it does not find a solution

    It's very awkward not not to be able to unlock a locked tool

    especially when you have tight work deadlines

  • I can't unlock the iWatch to reset.

    My problem is I can't unlock the iWatch to reset.  I made matching the iPhone but the iWatch is always asking me to unlock the iPhone.  How to unlock and not matched iWatch?

    < post branched out by host >

    Another piece of information.  I have not matched the iPhone/iWatch because I could not unlock the iWatch.  The pairing seemed to be broken, even if she showed the iWatch pairs from the phone.

  • I can't unlock the sim card because I don't have access to the entirety of the well-tempered clavier

    Hello

    I can't unlock the sim card because I don't have access to the entirety of the well-tempered clavier. Indeed, everything is enlarged.

    Hello from the bedienungshilfen zoom aktiviert den EIB. Dann das bild-display verschieben kannst.

  • How can I unlock the 427 udp port. I'm under win 7 with firewall and microsoft security essentials. No firewalls or additional security software

    How can I unlock the 427 udp port. I'm under win 7 with firewall and microsoft security essentials. No additional firewall or a security software when I go to the microsoft security essentials in the start menu, I can't find any reference to the ports.  I can't printer to work on the wireless network, even if the printer says that it is connected to the network.

    Hello

    Start the firewall of Windows listed in administrative tools.

    Create a new rule to open port 427.

    Carlos

Maybe you are looking for