Equium L20-264 - how to remove the DVD drive?

Similar Questions

• Satellite Pro 4260: How to remove the DVD drive?

  I have a 4260 Pro Satellite and it seems that the DVD drive is broken and I want to replace it. I can't figure out how to remove the old.
  Does anyone know how? Is there a manual with available how?

  Thank you

  Hello

  This notebook is not know for me but has checked some sites on the net and it seems that the top cover must be removed.
  Then lift the CD-ROM/DVD-ROM drive to disconnect PJ700 on the CD-ROM/DVD-ROM of PJ15 card on the system board.
  Remove the two screws that fix the Board Connector CD-ROM/DVD-ROM.
  Separate the brace connector connector Office CD-ROM/DVD-ROM and CD-ROM/DVD-ROM CD/DVD-ROM drive

  Well, I think that it of not easy for a person without experience.
  So if you n t know how to do and you have without much experience you should ask someone how knows what to do ;)

• Equium L20-264: how to get the restore CD

  When I bought my laptop, I him have been repackaged from a local retailer. I have been having some problems with it recently and think that I really need to do a complete restore of the system. Only problem my laptop did come with restore disks, anyone know where I can get my hands on one?

  Hello

  The recovery CD can be ordered from the ASP (authorized service provider) in your country.
  You should try to contact the guy and order the necessary CD s.

  Good bye

• Satellite Pro A10 - how to remove the optical drive?

  Can anyone give me some advice here please. I am trying to remove the DVD drive existing my A10. I removed the screws of restraint, but the Player cannot slide out. I checked for other screws but have found nothing.
  Any help or advice would be greatly appreciated.

  Hello

  As far that know that a single screw fix the drive.
  Turn the face of the computer down and remove the two screws fixing the CD-ROM
  Drive.
  Turn on the computer to face and open the display. Press towards the Group of CD-ROM drive and disconnect all of CD-ROM drive in the PJ1800 on the system board. Remove the two screws which support CD-ROM of the entire disc CD-ROM. Remove fixing two screws fixing the support side and remove the lateral support.

  All that s

• How to replace the DVD drive on a series of Satellite?

  Could someone give me instructions how to replace the DVD drive?
  I unscrewed a few screws in back and two under keyboard and I still can't get out.
  Any suggestions?

  Thank you
  Select this option.

  I found it!

  It's the single screw! It is under the flap of the memory.

• Satellite A30 - how to remove the hard drive

  Hi, new here...

  Can someone tell me how to remove the hard drive in my Tosh A30...

  Thank you
  captainp

  Hi Tim,.

  The hard drive on your SA30 is in the optical drive, but slide the optical drive out of its housing (undo the F5 marked screws on the bottom of the laptop).

  The hard drive will be visible fixed with four Phillips head screws that need to be removed (two on each side of the hard drive. With the removed screws, gently slide the hard drive toward the front of the laptop to disconnect its connector and carefully pull it out of its Bay.

  HTH

• Pavilion ze5730us laptop: how to remove the hard drive of the computer laptop Pavilion ze5730us

  Can anyone tell please how to remove the hard drive of the computer laptop Pavilion ze5730us?  I know its under the keyboard somehow, but I don't know how or where that open.  I could not find this model on YouTube either.

  Thanks in advance for your help.

  D.

  Hello:

  The only manual that I could find is one that covers the ze5600.

  See if it will work for your model too.

  http://h10032.www1.HP.com/CTG/manual/c00246219.PDF

• How to remove the printer driver under windows Vista software

  How to remove the printer driver under windows Vista

  Hello

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  --------------

  If you have an error spooler or service use these methods to make them disappear including having to re - install
  the same printer if you intend to remove it.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to remove the hard drive of a laptop the dv4 1444dx

  Hello

  Can someone tell me how to remove the hard drive of a 1444dx dv4 notebook? My laptop does not pass enven boot in safe mode. I tried to let repair system automatic and also tried recovery to a date when the latter worked correctly, but neither translates into success.

  I want to remove the hard drive and save my data before trying to reinstall the original image from the D: drive.

  Thanks for any help you can provide.

  Kind regards.

  Hello

  The procedure to replace the hard drive is detailed from Page 59 of your & Maintenance Guide.

  Kind regards

  DP - K

• How to remove the DVD ROM on the Satellite L300D 242?

  Hello

  my laptop (* Toshiba L300D 242 *) DVD ROM has been damaged and I have acquired a new and now I can not figure out how to remove my old DVD ROM and replace it with a new one... Please help me understand how to remove the old and replace it with a new one...
  Thank you...
  E-mail: [[email protected]]

  Agree with Feliks the ODD is secured by a screw hidden in the HARD drive Bay.
  So the HARD drive Bay cover must be removed to access this screw procedure is not really difficult, so you should be able to remove it easily.

• Equium L20-264: can I unlock the options in the Bios to change the speed of the CPU & FSB

  Hello

  I have a toshiba equium l20-264 today and I was wondering if I can open it the options in the bios to change the cpu speed and the speed of the fsb.

  But if you don't don't do this, I already have a Dell Xps laptop Overclcoked to 4.5 ghz (twisted majorly) and I installed today a very powerful cooler and heatsink of heat inside my laptop, I'm ready to overclock bu ti do not know if I can via bios but if so could you point me to guides for a code name overclocking intel celeron m 360 : DOTHAN

  Help, please

  regards James...

  Hello

  Unfortunately, this is not possible on the laptop.

  I o year owner of 3 different computers; two laptops and a desktop PC. The BIOS on the desktop is different and allows to change and increase the CPU. But the laptops BIOS does not allow to do something similar.

  Why? Because the CPU overclocking would increase the internal temperature and make portable is not stable and perhaps that it would infringe the motherboards and CPU!
  The notebooks run with maximum efficiency. If you compare the notebooks modules with cooling Office cooling modules you will see the difference!

  Please don t waste your time and don t find any possibility to overclock the CPU and the FSB

  concerning

• DV7-4270us - how to remove the DVD/CD device

  I have dv7-4270us. I need the BlueRay/DVD-ROM is rebooted. HP has this link to remove the device: http://support.hp.com/us-en/document/c01277211

  It's all wrong. Where can I find the correct instructions?

  Thank you

  Hi dhs13,

  Take a look at the maintenance and Service of Guide for your model:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?LC=en&DLC=en&cc=us&lang=en&product=5048768&

  I think that the instructions to remove the optical drive are on page 58.

  Stem

• Portege 3490CT - how to remove the hard drive?

  Hello

  I have a problem with my Portege 3490CT. It is completely dead (won't start not or read from USB floppy to use recovery discs). I would like to remove the hard drive to try to recover the information about it. Can someone tell me how to get out? I already have access to it, but I don't want to damage it in progress...

  Thank you

  Hello PNVS

  You can check this page
  http://www.servj.com/PC/Note/hdinstall/

  Good bye

• Satellite P10 804: how to remove the HARD drive?

  I would like to remove the internal hard disk of 60 GB of my satellite P10 804 and replace it with a bigger drive, but cannot find a way to enter in the case of removing the HARD drive.

  Does anyone have the details on how to do?

  Hello

  To my knowledge, the HARD drive must be placed under the optical dirve.
  To remove the HARD drive, first remove the battery and the optical drive, and then follow the steps below:

  1. remove the four black screws that anchor the shield of aluminum covering the HARD drive and pull it out.
  2. gently pull on the HARD drive the front panel of the computer to disconnect the system board, then pull it out.
  3. remove the four silver screws that attach the HARD drive to the HARD disk case.

  But be careful. If you have no experience ask someone with more experience in these replacements.

• Satellite L300: How to remove the HARD drive password

  Hello world. I have a problem with my Satellite L300. I put a password on the HARD drive and now I want to remove it, but it doesn't let me,
  So any ideas on how to completely remove the prompt to "enter the password for HARD drive built-in user" would be very appreciated.

  Thank you very much
  Martin

  Hello

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=56069

  The user wrote:
  + It's usually cycle which starts when you press or to start to change this option. +.
  + Once, I found that I was out. +

  Hope this is the info that you need to remove the HARD drive password...