Equium L20: Replacement keyboard keys

Had to remove 2 keys on the keyboard to clean a small piece of wood that had slipped. However, for the life of me I can replace the keys properly. I used two cell phones and could still tie them back no problem at all.

Can not get these back for love or money... no matter what body offer any help (ideally diagramatical)?

PS: Key and plastic media are certainly not broken / broken / cracked or lost.

Thank you very much

Hi Graeme

I don't know how to help you. Usually to solve major traffic again on the keyboard, you must press only plugs in the place where the keys are placed before.
Another procedure does not work for me.
Maybe something is broken (but you said that it is not a case).

However if you can not solve the key yourself then I would recommend contact a technician with more experience to help

Tags: Toshiba

Similar Questions

  • Equium L20-198: keyboard forgets to put the letters here and there

    My laptop Toshiba Equium L20-198 plays up. The keyboard sometimes seems to be a bit lazy and forgets to put the letters here and here. It seems to be worse when you type faster; is this a driver problem? If yes where can I update keyboard drivers?

    There seems to be none on the toshiba site. If it is not a driver issue - what is the problem?

    Any ideas anyone?

    Don t think that this issue was caused by a defective keyboard driver.
    I read some of the comments in this forum on similar keyboard problems on different laptops and especially BIOS update has solved a similar question.
    I recommend to check and compare the version of the BIOS of your laptop computer with the version on the Toshiba page.
    If it s a newer version then try to update the BIOS, but be careful!
    Don't forget to use the good BIOS and the proper procedure because wrong BIOS can damage the motherboard.

  • replacement keyboard keys for

    recently, one of the keys of my laptop hp g6-2105 tx 'delete' has been seconded to the keyboard while typing, and my laptop is under warranty period for coverage that ends the 19/08/2013, so can I have this fixed a problem plse, I mean I can help to solve this problem and give him something that was before she was seconded what I have to do? PLSE tell me.

    Hello

    Please try the following link:

    http://www.laptopkey.com/blog/

    and call HP directly for assistance:

    http://welcome.HP.com/country/W1/en/contact_us.html

    In the United States:

    http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

    Good luck.

  • Equium L20 - 197: keyboard does not work properly

    Having problems when you type characters come not as typed or missing

    Example of
    It's an o eampe shappnng when I attach

    Hello

    Please visit http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=22415
    You will find a comment posted by NickyNoogle. It can help you!

  • How to replace keyboard on Satellite A30 keys?

    Can anyone give me a detailed procedure to replace a keyboard key. I already had the spare keys, but I do not know how to replace! a link will be very useful!

    Keys stuck on keyboards and you can remove them easily.
    The main caps set on keyboard and if you want to turn off you must pull carefully on the key caps.

    Sorry, but I don t know how to simply explain the procedure.

  • Replace the key on the keyboard

    I had problems with sticky keys, usually the d, r and k keys I was using an air blower to draw air under them (with little or no success) and then attempted to lift the keys on an edge that helped make them work properly again... now a key popped (key d)... Yes my fault and looks like laying the back key will be difficult until one of the plastic pieces broke on one side and are bending too.

    Is it possible to replace the key or I have to replace the entire keyboard? And can I replace it myself or is it better to leave it to a technician?

    Usually, we prefer to send technicians to replace the entire keyboard.
    I'm afraid a single key are not parties we can ship you.

    If you want to you can go ahead and send me your Service number and a link to this topic via PM like that I can help you better than I can.

  • Equium L20 dead after flash BIOS

    I recently tried to update the BIOS on my Equium L20 (model PSL2Ze). I downloaded the latest version of the BIOS and ran the update of the bios windows that much happened and restarted the laptop and it's that it happened.

    Now, I don't even get the BIOS boot screen, indeed the screen didn't even come on when you press the power button.

    The green light as the fan that stays on the disk HARD runs briefly but other than that, nothing. I thought this would be fixable by burying a CD with the BIOS on but the instructions page to do this, it shows the extract the zip file you download in 3 folders 'Docs', 'disk 3.5' and 'CD', but the file download just extract in a folder and contains the version of windows and no records or Docs section.

    Is this an oversight, should I look elsewhere?

    Bq. {color: #333399} Option 2: update with CD-ROM-{color} \ {color: #333399} 1. Extract the zip file containing the BIOS upgrade to a temporary folder. \\ 2. Three subfolders will be generated in the temporary folder. "docs", "Update - 3.5' disc',"Update - CD - R or CD - RW"------3. How to make a bootable CD-ROM please read the *.pdf file in the "docs" folder \\ 4. Make sure that the laptop is plugged into the sector. \\ 5. Turn off the laptop. \\ 6. Place the BIOS upgrade CD-ROM in the optical disc drive. \\ 7. Turn on the laptop with the F12 key. \\ 8. The BIOS boot menu appears. Select CD/DVD or CD-ROM symbol with the arrow keys. Press "enter". \\ 9. Notepad starts from the upgrade of BIOS ROM-10. A boot menu is displayed. Select the point of updating the BIOS by using the arrow keys. Press "enter". ------11. The BIOS update process begins. Do not turn off the laptop during the update. ------12. If the update is complete, follow the instructions on the screen. {color}

    So basically I'm puzzled. I put a blank CD in the drive and turned on the laptop and it turns and tries to read so I'm confident a flash CD works but I don't know how to create the CD rom flash.

    Anyone can offer me some advice please?

    Scoopz

    It's a shame!
    But unfortunately, there is nothing to see! Seems the motherboard is dead and replacement is necessary to make it work again!

    You know that the update of the BIOS is always risky and so do not do if the laptop runs correctly.

    The replacement of the motherboard is not very easy and a little trickier. If you have no experience you shouldn't it because you risk damaging the new purchased Council where the warranty is valid!
    So be careful.

    I found this page that shows how to disassemble the Satellite L25. This laptop is very similar to the Equium L20. So maybe it s a little help.

    [How to disassemble the Satellite L25 | http://www.irisvista.com/tech/laptops/ToshibaL25/satellite_L25_laptop_overclocking_1.htm]

    But once again; everything you make are at your own risk!

  • Replacement keyboard for Satellite Pro P100-465

    Hello

    Does anyone know if there is another keyboard that I can get for this model?

    The current keyboard keys a pretty spongy and don't respond well except if pressed hard.
    Also, buttons which I use a lot, such as the right change key and enter key are below standard and difficult to use.

    I want to set up a keyboard layout different if possible. The keypad is not important to me.

    Thank you
    Mike

    Replacement of keyboard should not be a problem. I recommend you contact the partner of service authorized in your country. They should have the numbers for keyboards with a different layout. Using this number, you'll be able to order replacement keyboard.

  • Equium L20 - cannot start Windows mode of

    Hello

    I was wondering if you can help me. I have an Equium L20 - 197, windows xp home edition. (Also technically challenged!  :)) When I booted my computer laptop first time today, I received this message-

    «We are sorry for the inconvenience, but windows did not start successfully upward...» »
    and he gave me a few methods of commissioning:
    Safe mode
    Safe mode with networking
    Safe mode with command prompt
    Last good Configuration know (your most recent settings that worked)
    and
    Start Windows normally

    I was able to start press start windows normally and start the computer very well. I turned off the computer OK, then it was restarted later without any problems. I then restored in a frame earlier that the system did not work well. Restore seemed to go OK but then my computer froze, then were shut down by pressing the power button.

    However, the laptop will now not reboot. Just as I think it starts it goes to the error message and none of the options will work to start the computer, and I am now stuck on an endless loop of the above message.

    I don't want to use the product recovery disc, that he will wipe away all of the hard drive and I have the info I need access to! I have a recovery CD product for a Fujitsu which has windows xp edition family sp 1 on him. Is it possible that I can use this to start my computer or is there something else I need to do? I thought after pressing F12 and if it is possible to use the other drive Fujitsu to launch boot my system but do not know if this is possible. I don't have an xp disk from toshiba installation disc, when I bought the computer. :(

    I learned by a guy from the computer to the phone that sounds as if I need a new hard drive but would like to explore other methods before you go this route.

    Thank you very much in advance for any help you can give me. Susi

    Hi SusiB_1,

    Unfortunately, if you can start Windows t in any of these modes you have only one option and that is reinstall Windows. I mean you should do? You can do anything in this case

    As you wrote wipes disc, the whole HARD disc Toshiba Recovery and that's right because it of needed to recover to factory settings. But normally you should have a backup of your data or not?
    If this isn't the case, you can access the data, if you put the HARD drive into an external HARD drive enclosure. From another computer, you now have access to these data.

    By the way: for Toshiba recovery disc you n t need a product key. Everything is already done in the recovery image and no activation is necessary. :)

  • Equium A200-15I keyboard problems

    Hi all

    I have recently been given the above laptop it has a keyboard very worn with a few missing keys etc... Having bought a replacement keyboard I got it replaced, and it seems to work ok except for a few problems. Close keys don't seem to work or work strangely, for example:

    -nothing happens when I press "A" key, but when I press "S" key, I find myself with "qs" appearing on the screen
    -Same problem with 'Q', when I press the button, nothing happens but if I press 'W', I find myself with a tab size space key and a 'w' but not 'q '.
    -'a' appears, along with a "when I press the button to the left of the"1"key
    -the 'X' button also does not work, but did not appear with anything else again.
    -Same with the key 'E '.
    -by pressing the '2' key fact appears "12", while pressing on the '1' works well
    -windows key, also does nothing.

    The shift and caps lock keys work fine. The keyboard was nevertheless new out a package, it is true that on ebay, but the new. I guess the main culprit could be a faulty keyboard, but the letters appear when others touch seems weird.

    If anyone else has experienced this problem or have solutions? Whatever that either would be appreciated.

    Hello

    I think you should test another external USB keyboard.
    If the USB keyboard would work correctly, the problem is related to the new internal keyboard.
    Parts bought from Ebay could be compatible or if you have bad luck, the part will be not compatible or even defective.

  • Equium L20-198: error 0271 check date and time settings.

    My apologies if this appears twice, I tried to change and I somehow lost my thread.

    Hi people.

    For awhile, I had problems with my laptop. Toshiba Equium L20-198.

    If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

    Date and time settings error 0271 check.

    WARNING 0251 system cmos checksum bad default configuration used

    About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

    The problem persists and I now also get this message every time that I reboot rather put into hibernation.

    Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

    Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

    Thank you.

    > Is it possible that the CMOS battery charge the main battery and this is my problem?
    Well, the CMOS battery can be charged with AC adapter but the laptop must be turned on for about 18 to 20 hours.
    It s not I known if battery CMOS takes the power of the main battery
    Usually the CMOS battery should always charge in work and when the laptop is plugged in
    So, theoretically the main battery has no influence on the CMOS battery.

    I think it might be a mobo problem, I think this could be a reason for it

    By the way; in most cases the CMOS battery is not removable... so I wonder how did you repalce this CMOS battery...

  • Upgrade memory for Equium L20-264

    Hello

    I have an Equium L20-264, which is "dying" and advised to upgrade memory. Specs below.

    Equium L20 - 264 part number: key features PSL2ZE-00500CAV - Numtxpackets® Celerona® M processor 360
    -Windows® XP Home Edition
    -60 GB hard drive
    -256 MB DDR2 RAM
    -15 "TFT color display
    -Drive DVD Super Multi (Double Layer)

    Issues related to the:

    1. How can I remove the existing memory? Is there a guide of the user on this operation?

    2 How many slots have?

    3. What is the max memory per slot?

    4. can I buy Toshiba memory directly?

    It is rather urgent and would like a quick answer.

    Thanks in advance
    Rag99

    Hi mate.

    As far as I know your laptop supports two memory locations.
    They must be placed at the bottom of the unit.
    If you n t know how to change this then I recommend consulted the user manual!
    The manual can be downloaded from the Toshiba European page.
    I think that the laptop can be upgraded to 2 GB of RAM. So, you can use 1 GB of RAM in one slot.

    PS: you must use the RAM DDR2 PC2-4200 memory - 200pin modules

  • Upgrades memory battery/Equium L20-264

    Hello

    I want to improve memory my equium l20-264 to the maximum which is about 2G I think and I was wondering what parts of memory I need to do this? He currently heads the 256 MB standard, but I'm not sure if I need to replace that with a higher memory 256 AND get a new one to compensate for the amount or if I can buy a souvenir that will do the job. Is also editing them something that I can do myself or should I consider somewhere for them to do?

    The other thing is the battery life is only 1.5hours and hoped to obtain a superior capacity for her battery? Anyone know if I can do it and so what battery need and how long it lasts?

    Thanks in advance

    GATS

    Hi the GATS.

    Your laptop has two banks of memory (usually accessible by a small flap on the bottom of the unit). He must have a slot in use at present with a 256 MB card installed. New RAM modules are available in sizes of 256 MB, 512 MB and 1 GB so to get all of the 2 GB, you will need to replace the 256 MB card existing with 2 X 1 GB modules.

    The site of Toshiba UK lists all the options that are available for your model (!), but I found the options available on the following web - site: -.

    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=20877&ft=m&St=3

    I don't think it will be possible to install an additional capacity for your laptop battery and 1.5 hours you CITIES seem just to me for this model.

    Kind regards

  • How to get and replace a key on the Satellite A100-522?

    Hey, Toshiba.

    I have a Toshiba Satellite A100-522 model No. PSAA2E-01C01EED and one of my shift keys
    has broken below, so I can't use it (the small plastic bar to balance the key is broken
    If the key "blockages". Can I send it for repair to the warranty, and Ive talked to the
    seller, but I don't have the time to send it for repair (no laptop replacement in the meantime).

    Is it possible to get a new key and replace it myself? I know that some other laptop producers do the same thing,
    rather than use a lot of time on repairs, if they are too simple.

    Concerning

    John Reyes

    [email protected]

    Hello

    Well, it's very easy to replace the keys.
    Please check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20727&MessageID=76283

    But if the key is broken you will need to replace the entire keyboard.
    To remove the keyboard, you have to remove the cover plastic thinking above the F keys.
    Under this coverage, you will find 2 crews secure the keyboard
    Remove the two screws and remove the cable from the flat keyboard which is connected to the motherboard.

  • Satellite M100/200 PSMAAA RAM issue and replacement keyboard

    For the last year my satellite M100/200 PSMAAA-022006 worked rather slow, it takes a long time to open programs and sometimes crashes.
    So I intend to make a recovery of the system at the end of the school term.

    Now, I think I have a bit of extra ram, I don't want to have to go deep into my laptop and put it under my keyboard, so I'll just put it in the free space below the friendly place. I don't know what kind of ram it will take care of my system with 512 venus, then would it be appropriate put a 1 GB Stick? I can't find a manual on the Toshiba page so I'm not aware of what my system can handle and what kind of ram I can install myself.

    So the question is. How much ram can I put in and what kind.

    Also months ago I removed some keys to remove hair and lint on my keyboard, those General in the middle of the keyboard were easy to replace but my key "1" would not, so I removed the '2' thinking if I can work on how we worked the other should do the same.

    So now I'm stuck with not one or two keys, which I have now lost. The membrane on my a key ripped off also so now there are just the small piece of circuit showing. I thought that if I can remove the piece of plastic on the keys it might let me get the angle right them suddenly on.

    Should I take my laptop in a repairman and let them sort it out?

    Hello

    You can replace plastic key keyboards plugs, but you will not be able to replace the simple buttons
    So, if the only keyboard button doesn t work, then you need a new keyboard.
    Akuma is right you should get in touch with the ASP to replace!

    The M100 should accept 2 GB of RAM (2 x 1 GB) I googled a little and some were abele to upgrade!

    Greetings

Maybe you are looking for

  • would apple tv 3 work in the Philippines?

    Apple tv (3) would work in the Philippines?

  • The data in a loop of consumption does not evolve

    Help! I am reading different voltage to an interval of 500ms in a loop of producer and move to the consumption loop. However, I notice that the values in the loop of the consumer do not change even when the voltage has changed? What can I do?

  • BlackBerry Z10 Voicemail download

    MY husband died recently.  The last time I heard his voice and his last message is a voice message on my Blckberry Z10.  My wireless warning messages for 30 days.  I would like to download his message to save for the future.  It was not superficial,

  • Signature of java applications

    Hello everyone. I'm really new to this forum, but I have a question. Mabye some of you can point me in the right direction. So I'm a java developer and I started to develop java applications for blackBerry (only 1 so far). No, I want to develop an ap

  • Input audio codec C20

    Hello I tried to use the HDMI in the codec (main cam in) to connect to a DVD player I have the video image of the DVD but no sound. I have read the Administrator's guide and can not finde any thing about the path of the Audio in the codec. One knows