Equium L20 with winphlash issues when you try to update BIOS

Similar Questions

• 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

  6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

  Repair Apple Software Update since the programs & features Panel configuration and then try again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Error 8007371C when you try to update Vista64 with KB958623 update

  I have a very big problem when you try to update windows via windows update.

  I can't install SP1 on my Vista 64-bit because when windows update tries to install the KB958623 update, it always shows the same error message c 8007371.

  I tried many things to fix it, but nothing works. I would appreciate if someone could help me sove the C 8007371error.

  Thanks in advance.

  Hi master2437,

  Thanks for posting your question on the Forum of answers.

  You can try using the Installer Cleanup utility and re-run the update.
  Here is an article on this subject:

  http://support.Microsoft.com/kb/290301

  I also suggest to do a clean boot before you perform the update to prevent conflicts with other software.
  Here is an article on this subject:

  http://support.Microsoft.com/kb/929135/

  Alternatively, you can try to install the update in Mode safe as well.
  Here is some information on how to do it:

  http://support.Microsoft.com/kb/950684

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get "communication error with kernel" message when you try to run a virus scan program

  Get "communication error with kernel" message when you try to run a virus scan program

  Hello

  What antivirus do you use?

  Follow the steps in the article mentioned below and check if this solves the problem.

  
  The error message "error communicating with kernel":
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN2280

• HP Officejet 6500 E709n: HP Officejet 6500 E709n hangs with mac (Mavericks) when you try to save changes to scan destination

  HP Officejet 6500 E709n hangs with Mac (Mavericks) when you try to save changes to scan destination. That's all!

  What is the problem of HP?

  Hello

  What application you want to scan to?

  Try to install the HP Easy Scan software, it will be installed in the Applications folder:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  You see a difference using?

• Receive an A12E1 error Code when you try to update Photoshop CC.  Running an iMac with 10.7.5.  My OS drive is formatted as Mac OS extended (journaled).  Any suggestions?

  Receive an A12E1 error Code when you try to update Photoshop CC.  Running an iMac with 10.7.5.  My OS drive is formatted as Mac OS extended (journaled).  Any suggestions?

  As I said, I'm Windows as well as a few links saved, I have ZERO idea what to do with a Mac

  Link for download & install and installation & activation problems can help

  -Cat http://www.adobe.com/support/download-install/supportinfo/

• Error 0 x 80240036 when you try to update Internet Explorer

  Original title: error code 0 x 80240036

  I get the error code 0 x 80240036 when you try to update to internet explore after that computer crashed

  Hello

  1. you are prompted to install Internet Explorer 8 through Windows updates?

  2. What is the number of KB of the update of Windows?

  Updated version causes this problem. To do:

  (a) click the Start button
  (b) go to Control Panel,.
  (c) click on Add/Remove Programs.
  (d) scroll through the list of programs, and downstairs, you will find all the updates that are installed with their numbers categories.

  Provide us the number of the windows update.

  Follow these methods.

  Method 1:

  I suggest you run the FIXIT from the link below and.

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Now, try to install the update and check.

  Method 2:

  If the issue is not resolved, I suggest you try the steps in the article.

  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 http://support.Microsoft.com/kb/322756

  Method 3:  If you are still not able to install Internet Explorer 8 via Windows update, then you can try manually install the update.

  Step 1: Follow these steps.
  a. visit the following Microsoft Web site: http://www.microsoft.com/downloads/Search.aspx
  (b) search by downloading the update (with the number of KB)
  c. save it on the desktop.
  d. try to install it manually.

  Step 2: You can also download and install the stand-alone Internet Explorer 8. http://www.Microsoft.com/en-US/Download/details.aspx?ID=43

• I get a notification to update when you sign in to firefox. When you try to update you get the message "connection to Server", which can go about 4 hours and never update

  I get a notification to update when you connect to firefox on my mac. When you try to update, I get a message "connect to Server" which can go over 4 hours and never update. It is most annoying. How can I remove that annoying popup which does not in any case all in ensuring that I have updated to the latest version?

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• I have error code 8024200d when you try to update and install SP1 for Vista

  I have error code 8024200d when you try to update and install SP1 for Vista. I'm currently running Vista Ultimate. Any help would be appreciated.

  Thank you!  Matt

  Matt,

  The 8024200d result code indicates WU_E_UH_NEEDANOTHERDOWNLOAD
  Update Manager did not install the update because it must be downloaded again.
  Suggest you download and Save the complete stand-alone package of Vista SP1.

  Links to the standalone versions are on this page because you validate that the edition of Vista is x 86 (32-bit) or x 64 (64-bit). You can see the architecture of the system of opening in the Panel and next to the search System system type: Windows Vista Service Pack 1 (SP1)

  Before attempting to apply the SP1 please consider this information-

  If you choose to install Windows Vista SP1 via the standalone installer available on the Microsoft Download Center, Microsoft recommends that you first check Windows Update and install all drivers in option. Read the Articles in the Knowledge Base 948187 and 948343 for more information.

  Suggest you to create a folder on the root drive (the drive where Windows is installed, usually C:\) and name SP1.
  Move the downloaded Service Pack in the newly created folder.
  Disconnect all the devices, printer, external USB hard drive, etc.

  Then, Configure the system starts in a clean condition
  After you restart the worm as a clean boot, apply SP1.

  If there is still a problem with the installation of SP1, MS offer support chat and free e-mail to "help you to download and install service packs" here-
  Microsoft technical support

  Or, you can post here - MowGreen Windows Vista Service Packs/Windows Server 2008 Service Packs Windows IT Pro - consumer safety Expert

• Error ox80072751 when you try to update to BioShock 2

  Error ox80072751 when you try to update of BioShock 2 (Steam bought)

  I tried to install the most recent GFWL, PC rebooted, signed in to GFWL with old or newly created account.

  Installed all the updates of Windows currently needed.  Tried again above.

  Disabled network manager, tried again.

  Nothing works.

  Using W7 64 bit

  Hello
   
  We checked for error code and couldn't find any information for Windows.
   
  This problem has been resolved by downloading and installing the patch from the game maker website.
  Because you bought steam bioshock2, you will need to get the patch from them and install it.
   
  There must be some specific troubleshooting steps for this error code. For the best options for technical support, please post your query on the game manufacturer's website: http://www.2kgames.com/#/index.php?p=support
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• problems when you try to update

  It says c:/windows/sysWOW64/cnupdater.exe not found when you try to update. How can I fix it

  Nicole vercimak

  CNUPDATER. EXE has nothing to do with Windows Update. See http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/f1c4b380-679d-466e-908d-bfa9684c6133 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When you try to update Windows XP, I get the message: error number: 0 x 80245001

  When you try to update Windows XP, I get the message: error number: 0 x 80245001

  Hello

  If you have configured the installation of the automatic update of your computer, the computer downloads the files necessary for the installation of Windows updates in the background and records them in certain folders on your computer. During installation, these downloaded files are extracted by the requirement by the services of update running on the computer.

  The error you are getting means that some of these extracted files required by Windows Update have been damaged. Now, in order to solve the problem better, we need more information about the computer that has the problem. José asked a few questions about this computer in the first reply to your message, it will be very useful if you could answer these questions.

  Here is some important information that we need:

  1. What is the level of service pack installed on your computer?
  (Click the Start button, click run, type winver, and press Enter to know that information)

  2. what update failed to install with this particular error code?
  (Please refer to the method 1: search for the installation error code in the Windows Update troubleshooting tool section of this article to learn how to check your update history to find this information)

  In the meantime, you can follow these steps on the computer and see if that helps:

  Note: These steps will give the files associated with Windows Update in your computer. Perform these steps would be clear Windows Update history on the computer.

  1. click on Start, click run , and then type Services.msc in the run box and press ENTER. This should open the windows of Services for you.

  2. then find the following three services in the list of Services and stop them (by clicking on it and click on stop) one by one:

  Automatic update service

  (BITS) Background Intelligent Transfer Service

  Cryptographic services

  3. open Windows Explorer and navigate to the following location:

  C:\Windows\

  Rename the folder C:\Windows\SoftwareDistribution in SoftwareDistribution.old

  4. go to the following location:

  C:\Windows\System32\

  Rename the Catroot2 in Catroot2.old folder

  (be careful here, do not rename the C:\windows\system32\catroot folder, you must rename the Catroot2 folder only)

  5. now go back to the Services window and start the services of three you had stopped earlier.

  Now, close all open windows, restart the computer and try updates and install them. If it fails again, please answer with the information that we requested.

  I hope that the information I provide here helps you. If you still need assistance, we know. We are happy to be of assistance.

• When you try to update my system I gott error 0 x 80070424.

  error0x80070424

  When you try to update my system I gott error 0 x 80070424.  Need help please, I can not install updates?

  error0x80070424

  When you try to update my system I gott error 0 x 80070424.

  Suggest that you first spread malware as the cause of the problem by following these steps:

  (1) have your system scanned by the antivirus/security suite installed.

  (2) run this tool from Kaspersky: how to remove malware belonging to the family Rootkit.Win32.TDSS

  http://support.Kaspersky.com/viruses/solutions?QID=208280684>

  (3) download, install, update and run full scans with two of these tools free anti-malware:

  MalwareBytes anti-malware (MBAM)

  http://www.Malwarebytes.org/products/malwarebytes_free>

  SUPERAntiSpyware (SAS)

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  (4) run the Windows XP and Windows Server 2003 System File Checker (Sfc.exe) tool:

  http://support.Microsoft.com/kb/310747>

  `~`

  If no malicious software is detected, there is a fix on this page which will reset the Windows Update components:

  How to reset Windows Update http://support.microsoft.com/kb/971058components >

  Suggest you download and Save it. Then, close all the open programs and web browsers.
  Run Microsoft fix 50202.msi and choose it is the default mode.
  After that he finished the race, see if the return code is displayed again when looking for updates.

  If not, then run the Fixit once more and choose his Aggressive mode.
  Restart once it is finished and see if the return code always appears when the updates.

  IF malware is detected, then please post if it has been removed and that the specific name of what has been detected.

  A KB was created for the error code 0 x 80070424 that appears when you install Microsoft Windows Update/Microsoft Update. The KB includes an automated Microsoft Fix it 50686 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/968002>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MS fix 50686.msi.

  UTC/GMT is 01:18 Thursday, September 22, 2011

• Error 80248014 occurs when you try to update Windows Vista installing KB973768. Why?

  I tried to install KB973768 and got the error code 80248014. I tried to reinstall Svc Pack 1 and I was told that it was already installed. Then he told me to empty the Distribution of software/Windows/C I did. Now it not even will check for the updates. Now, I must go back and system restore I guess and then I'm back to Square One good blood! What the _ is it wrong? I have a HP Pavilion Windows Vista Home Premium on a 64 bit OS. I use Flash Player 10.0.45.2 and browser Firefox 3.5.7. Nothing seems to work, and in addition to that of the attached screenshots do get MS technology because it gave me a corrupt address! Help me please? And I don't have his bloody monitor. Reinstall all the drivers and software that several times and I've tried manual install of KB973768 several times without success! Thanks - K & K

  E-mail address is removed from the privacy *.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista update problems. It goes in a loop when you try to update.

  Vista goes in a loop when you try to update. The loop is as follows: - control panel update windows for checking updates for windows updates-installnew update softwear-install now the user account control continue download and installation of updates = control of update windows for updates on your computer-check updates - so this loop repeat any help woul be received gratefully

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner