Equium L300 error - CD/DVD drive problem - Code 39

Similar Questions

• Portege M200 error - CD/DVD drive problem - Code 39

  I have a problem. I would like to perform a recovery on my m200 Tablet System.

  I have a dvd external drive (as the m200 has not built into the player) and the correct recovery disk.
  However, because of a problem that occurred some time ago, there is a problem with the driver (+ Windows cannot load the driver for this hardware device.

  The driver may be corrupted or missing. (Code 39) +), and so I can't start the recovery.

  If someone knows a way I can fix the driver, or another way to perform a system restore, it would be extremely useful!
  A solution to the problems of one or two would be great.

  Thank you very much!

  Hello

  > The driver may be corrupted or missing. (Code 39) +), and so I can't start the recovery.
  Are you sure about that? This code appears in running the operating system but recovery doesn't run under the operating system currently running.
  Please try to start the recovery procedure and let me know exactly what is happening.

• Re: Cd/DVD drive problem - code error 39 on Satellite P series

  Hello

  It is my first request for assistance.
  My CD/DVD drive is most recognized, and when I go to Device Manager and click on CD/DVD I'm informed that the cdrom.sys file is there but cannot be loaded.

  An error number 39 is reported.
  Any advice would be greatly appreciated, but please keep things simple to the actions of a single line if possible.

  Of course, you can get a few tips ;)
  I think you might find faster if you are looking for first in the forum, but I'll try to help you too.

  He error code 39 is very common issue and can be resolved easily.
  See this MS knowledge base article:
  http://support.Microsoft.com/kb/314060/en-us

  So first of all remove the CD/DVD drive device manager.
  Then access the registry using the regedit command and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop and wait until the CD/DVD drive has been installed again.

  That s it. ;)

• Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Original title: Add/Remove components error and DVD driver error

  Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

  Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

  I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

  Hello
   
   
  Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123

   

   

  Method 1.
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

   

   

  Method 2.
  Also, try the methods listed in the section below and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10)

  Teredo tunneling adapter error: Code 10

  I have a wireless modem in my house.  When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10) and I have to click "Reinstall driver" I did.  But it will not re - install.  I'm not too irritable.   Can help you.

  In addition, I don't know if there is a related problem, but my laptop takes a long time to communicate with the printer.   The doc will be in Quebec but does not print.

  Thank you.

  Hi LindaGreenwood,

  1. what operating system is installed on the computer?
  2. you have made no changes to the computer before the broadcast took place?

  Generated 10 error code when Device Manager does not have enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I suggest you uninstall the drivers completely uninstall and then reinstall the drivers from the manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Code 19 CD/DVD drive problem.

  My CD/DVD drive is not recognized.  I go into the Device Manager and it says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  I tried to uninstall then restart and reinstall as troubleshooting says and I still have this problem.

  I tried "Mr. Fix it" and tells me that it cannot solve the problem.

  I tried to go through the steps of using regedit and there are no "less" filter to remove, only a "superior" filter  When I look for what to do if there is no lower filters to delete, there is no help in finding.

  I checked my driver, that is until this day of nto.

  I tried a system restore. Did not work.

  I am at my wits end and any advice would be very welcome.  It seems at this point, I need to reinstall windows xp, but I have no idea how to do it even without a working cd player.

  My OS is Windows XP pro with service pack 3, and is my reader of cd/dvd LITE-ON COMBO SOHC-5236V.

  Thanks for any help.

  Hello

  In this case, try to remove the filters in your registry of the computer from the CD/DVD drive to get rid of the error CODE. Please see the link below:

  http://support.Microsoft.com/kb/982116

  Thank you! :-)

• CD/DVD-RW Gone driver - problem Code: 39

  My daughter was playing Sims2 on his PC Pavilion and one day it was fine, did a update through Windows - that automatically happens - next day my cd/DVD-RW driver - disappeared.  This is the problem report, I get:

  Description

  Signature of the problem

  Problem event name: PnPDeviceProblemCode

  Architecture: x 86

  Hardware ID: IDE\CdRomHL-DT-ST_DVDRRW_GSA-H20L___S853___

  Configure the class GUID: {4d36e965-e325-11ce-bfc1-08002be10318}

  The PnP problem code: 00000027

  Driver name: cdrom.sys

  Driver version: 6.0.6001.18000

  Driver date: 01/19/2008

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 39.

  Hello Mayasmommi,

  Thank you for your message.  Click HERE and run the FixIt!  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Change DVD drive region code

  I have a laptop with Windows 8 on it and I had problems with a "region code" because we got it. Second hand, it was when we got, but it works and the Guy didn't have anything set up. How would I go about editing a "region code"?

  Hi Jared,

  I would suggest trying the following steps and check if it helps.

  a. click on this computer and then click Properties.
  b. click Advanced System Properties.

  c. in the Hardware tab, click Device Manager.
  d. in the list of devices, double-click on CD-ROM/DVD-ROM drives, click on the DVD drive for which you want to change the region setting and then click Properties.
  e. on the tab area of the DVD, make the desired changes.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Equium A210-1AS-CD/DVD drive eject

  I just noticed this problem. My CD/DVD drive is trying to read the media, but after about 30 seconds it just ejects it, I have also no drive icon that appears on the screen for the CD/DVD drive.

  It could be a driver problem or something more serious?

  Evereything else works very well.

  See you soon

  Hello

  The CD/DVD drive is listed correctly in the Device Manager?

  Maybe it s dust on the lens. You must clean with a microfibre cloth. Be careful with this.

  In the worst case, your drive is defective and must be replaced.

• Portege 4000 CD/DVD drive problems

  Afternoon,

  Someone at - he experienced problems with the CD/DVD drive on the failure of 4000? If so, had any luck by encouraging working again?

  Thank you

  Andy.

  Hello

  If there is no way to make it work again try to use the System Restore tool or preinstall OS using the recovery CD. After that it should work fine again except there are a few hardware malfunction.

  Good bye

• Satellite 2430 DVD drive problem

  Hello
  My Satellite 2430 has had a strange DVD problem and may not know what is all about. All started when I tried to make a full recovery. The unit was not able to boot from the DVD. I checked the DVD player with different bootable disk, but still nothing. Unit won't boot from DVD drive even if you press F12 and peripheral DVD selected. Not to mention that the recovery DVDs is loaded normally in my desktop pc. Notepad starts Windows OK the HARD disk and, which is incredible, is that, inside Windows, everything is OK. The DVD player works like a dream. However, it is not enough to perform a full restore, as the recovery process cannot be initialized by Windows. A leap that the BIOS is at the origin of the problem, I've upgraded to version 1.6, but there is no change in the behavior of the DVD.
  Any thoughts, before using a big-big hammer?

  Hello

  Have you tried to change the boot priority in the BIOS?
  If this isn't the case, then first change the startup procedure to the CD player. The local network must be on the end.

• Lenovo y530 Windows 7 installation cd/dvd driver problem

  Hello everyone!

  I'm a happy user of Lenovo y530 bought with MS Windows Vista Home Premium. I have easy access to your MSDN AA software. It allows me to download and install Windows 7 Professional for example. I downloaded the image, tested on virtual machine and it works fine. So I decided to install it directly on my hard drive for portable computers. I burned a dvd with a possible minimum speed and here I had a problem. It starts very well, I choose the language and locale, but after she, I have information that there is a missing cd/dvd driver. Installer wants to give me a file location.

  I don't know what driver is needed. I downloaded files related to my Optirac drive but they are all exe and it does not accept the installation program. Could someone help me?

  I searched many forums, but there is no ansfer of satisfaing I can't use USB key to install it.

  I also tried another DVD to burn, another Windows build - and the result was the same.

  Edit: have you tried with another order of start (CD 1) - with the same results

  The response was quite strange for me. I tried a DVD + R instead of DVD - R disc and it works

• XP cannot find CD and DVD drives - 41 code

  I just reinstalled XP Pro on my PC.  In 'My Computer' my CD drive or my DVD player - RW appear.  In Device Manager, two discs show, with yellow exclamation point. In the properties of each drive, it says XP installed the driver, but cannot locate the device (Code 41).

  My BIOS sees the two discs properly and both are working, with a bootable CD after reboot.

  The DVD drive is a SATA drive and the CD-ROM drive is an IDE drive.

  I ran the automated Service technician to http://support.microsoft.com/gp/cd_dvd_drive_problems but it has not fixed this.

  What can I do to fix this?

  I just reinstalled XP Pro on my PC.  In 'My Computer' my CD drive or my DVD player - RW appear.  In Device Manager, two discs show, with yellow exclamation point. In the properties of each drive, it says XP installed the driver, but cannot locate the device (Code 41).

  My BIOS sees the two discs properly and both are working, with a bootable CD after reboot.

  The DVD drive is a SATA drive and the CD-ROM drive is an IDE drive.

  I ran the automated Service technician to http://support.microsoft.com/gp/cd_dvd_drive_problems but it has not fixed this.

  What can I do to fix this?

  Control Panel; System; Computer hardware; Device Manager; CD-ROM/DVD-ROM players; Select the drive; Right-click; Uninstall.  Then, restart the computer.

• DVD drive problem.

  I'm having a problem with my dvd r/rw drive, it does not recognize a cd - rw that contains data on it as a dvd/cd-rw, instead it recognizes it as a CD. However, she acknowledges a Virgin dvd/cd-rw as a dvd/cd-rw. Can someone explain this causes the drives are not fully and I'm using nero6 to write files on the disks.

  Hi gy-tek.

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  You can try to check out the following link and try the Fixit or the steps for Windows XP:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  If the link above does not resolve the problem, see the following link and check:

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forumand let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Driver problem (code 37)

  Hey everybody!

  Whenever I plug to the USB port on Texas Instruments evaluation/development cards, I get the following message:

  Windows cannot initialize the device of this hardware driver. (Code 37)

  I tried to restart my computer, uninstall/reinstall the drivers, windows manually to the folder on the drive (in the folder to install the software that came with the hardware products) and nothing works. I'm guessing that the problem is with my computer/Windows because none of the other users of the products reported similar problems.

  Also a few days ago I pluged in port nine disc WD external hard USB, the whole computer just crashed and now it does not recognize it when I plug. It works fine on another laptop which is another reason why I think that the problem comes from my windows/PC.

  Any help or advice would be greatly appreciated.

  I run Windows 7 on a Toshiba Satellite L555.

  Journal of aswMBR (thanks, by the way) he demonstrated a hidden service (driver seems to be probably loading at startup). In addition, given that you tried to run HJT and he you prevented of doing so, noting that the defined admin of strategies (you yourself clearly did not), it's as if my analysis is correct and that you are infected with a rootkit.

  My expertise is not analyze/debug, the malware removal by all means. That being said, I myself can give you adequate removal instructions. I can say that TDSSKiller will probably show the rootkit and be able to remove it, but using TDSSKiller and remove a rootkit can sometimes according to the rootkit make your operating system a non bootable Clipboard.

  What I would do if I were you? Honestly, just wipe the OS and on foot. You can remove the rootkit? Maybe, but you're in great danger after that, and when you have a rootkit MBR-based, he's bad and leaves a lot of problems behind.

  Alternatively, since it is your best and your choice try to remove it and perhaps even with the help of our experts/MVP security is there (in the right forum, of course).

  To you and to think!

  Kind regards

  Patrick