Equium L300: Lively controversy - power calibration error

Similar Questions

• Equium M50 can burn CD but not DVD - power calibration error

  Hello

  Well, basically, that's my problem. The other day I tried to burn a dvd but kept getting the "power calibration error" tried different DVD and burning software, but still the same problem, although I can burn DVDs perfectly.

  Any ideas anyone?
  Thank you.

  Hi dude

  Unfortunately, this doesn't sound good.
  Power calibration error is known to me and it seems that there is no other way to replace the CD/DVD drive with the new.

  According to the error message is unable to calibrate s lens by car in the right position and that's why the drive can't handle certain mediums.

  See your owner's manual for compatible CD/DVD players.
  If you want you can also control the caught player in charge of a partner of service authorized in your country.

  Good luck

• Power calibration error - Mat * a UJ - 830 s drive Satellite M45

  Hello!

  I have a problem writing files on my carpet * a writer uj-830 s. My laptop is Satellite M45. When I try to burn a CD or DVD in nore or dla, it gives the power calibration error.

  I'm sick and tired of this!
  Can someone help me please?

  Hello

  Power calibration error is known to me and revealer of truth he s just doesn't sound right.
  For the most part, this message appears if the lens of the player is unable to calibrate in the right position.

  The goal must always be calibrated before you start read or write the middle.
  If this procedure fails, the drive is not able to manage the CD or DVD and get the power calibration error.

  Frankly, in most cases, the drive needs to be replaced, because AFAIK this dysfunction is not repairable.

• DVD-RAM 'Power calibration Error' on Statellite L20

  I have a problem with my recorder Satellite and DVD - RAM (MAST * a DVD-RAM UJ - 841S).
  When I try to burn a CD/DVD (I use Nero 6) often I see information "POWER CALIBRATION ERROR".
  So I have a question: this error is software error or is it a hardware problem.
  Sometimes I can burn CD/DVDs.
  I have Windows XP he SP2
  RAM 512 MB
  HARD DRIVE 60 GB
  Computer is almost 2 years old.
  Thanks a lot for all ideas.

  Hello

  Please check this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19024 topic and see what some users think about it.

• Satellite L20: Cannot burn DVDs - power calibration error

  Hello

  I have problems when you try to burn the DVD on my Toshiba Satellite L20. Nero indicates a "power calibration error". Lens and drive have been cleaned up, but it did not help. Supprisingly, DVR +/-RW and CD are treated correctly. DVD player of any sort is also OK. Only burning DVDs (+/-), regardless of their manufacturer, fails.

  The next step, I wanted to put a fresh firmware in the drive which is Mat * a UJ - 841 S. I found the firmware on another site of PC companies. But the installer stops with the message that it does not apply to my reader however it was designed exactly for this kind of car.

  On the website of Panasonic, manufacturer of the drive, there is the information that support for this model is provided by the hardware vendor - in this case, it is Toshiba. But there is no firmware for this drive on Toshiba support pages.

  Can anyone help me, please.
  Thanks in advance.

  Piotr

  Hi Piotr

  First of all, note that after the installation of non-Toshiba firmware yourself, will lose it warranty for the reader. In any case, on a forum I found an interesting solution. You can try:

  1) click Start
  (2) select control panel
  3) click on Administrative Tools
  4) click on services
  (5) go your way down to SERVICE of the COM of ENGRAVING of IMAPI CD
  (6) right-click (on IMAPI), and then select Properties
  (7) in the middle of the window, it will say start type. Click the arrow on the right and select disabled.
  8) click APPLY

  I also noticed that Nero starts much more quickly than before. I recommend you test different blank media.

• DVD-RAM UJ-820 s - power calibration error

  Since a few days, I have this problem. If I start the burner, I get an error: "power calibration error". What this means? What can I do?

  Thank you for your help.

  Hello

  Click on the advanced search option and put error of calibration of power as search terms. You will find a few interesting topics like this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=17442
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9703

  Check it!

• Satellite A50 will record on Dvd, but not on a CD - power calibration error

  My Satellite A50 will record on Dvd, but not on a cd. It happens with power calibration error after about 5% of the record.
  The drive used to save at all!

  --> Power calibration error is a mistake known to me.
  I've read on various sites several suggestions and comments and the power calibration error appear because the lens of the drive can not calibrate correctly.
  It is a hardware malfunction and unfortunately nothing :(

  You will need to replace the drive

• Re: Need Satellite L30 - 105 Vista - power calibration error - new firmware

  Hey guys =)

  Ive got a Satellite L30-105 running a Vista 32 bit. And even if I try several different (Imageburn, Nero) burning software, and with the TDK - CD, I get an error in the burning software, saying "power calibration error".

  Satellite L30 - 105 (item number PSL33E-02S026N5), use a cd/dvd burner called MAST * a DVD-RAM UJ-850 s

  I wonder, can I download and install new drivers for my dvd player?

  I will also try to buy this "cleaning-cd", to try to clean the lens. cause I bought the laptop in 2007... then her grandmother as...

  But you guys don't have any what could be bad? Is it expensive to get a new cd/dvd drive for this laptop?

  Bravo and thank you!

  Hello

  Power calibration error means that the laser ODD lens cannot calibrate in the right position.
  Generally this has nothing to do with a firmware of drive but with the problem of equipment.

  In most cases, the CD/DVD drive must be replaced.

  I'm not sure how a new CD/DVD drive could be but the fact is that you cannot use any CD/DVD drive
  You need a compatible and such disc compatible and taken in charge could be ordered in a local ASP.

  welcome them

• Qosmio G20: Can't burn CD but only DVD - power calibration error

  Hello

  I am having trouble, and I think it's very strange.
  I can't record audio cd or data!

  I used sonic reducer, like nero, like windows media player... tried 3 different brands of cd'r and I can not burn audio or data files in one of these... But... I can burn DVDs... it's very strange right?

  PS: when I record with nero, I keep having this message on the relatory of the engraving: 'power, calibration error' but only i when I try to burn Cda´s... DVD recording has not this problem

  I have to update some drivers?

  Please, any help would be great, or I'll have to make a big trip to resolve the problem on the laptop store.

  concerning

  Hello

  I'm afraid you will have to make a trip: (m
  Information about the burning process was very useful.
  This confirms my fears.
  In my opinion there is not a lot to do and the drive needs to be replaced. There is a power calibration error. This happens if the lens can not calibrate correctly. If you use different media the lens must be calibrated every time before the combustion process will begin.

  I think that you will need to contact the Toshiba ASP in your country

• Satellite M40: Power calibration error - drive cannot burn DVD - RW more

  My drive is a carpet * an oem UJ - 831S. After a screw-up partitioning job, I had to format my HD and reinstall Windows XP... and then I can not burn DVD - RW more.

  Tried many programs such as Nero and a fireman, gives an error of calibration of power from the beginning.
  Burning CD - r and CD - RW no problem however, and I can read CDs and DVDs of movies very well.

  Google and searched for a month without success, tried to blow the laser lens, but there is no dust, I tried different media, etc. I know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincedence to stop working right after that I reinstalled XP.

  An interesting note however, my laptop has not been provided with a CD of Toshiba, so I had to reinstall manually more drivers by downloading the Toshiba site, so I have a funny feeling, this could be a thing of the software/firmware, or even a framework.

  I installed the new firmware 1.02 for the reader as well. I don't remember what the firmware was before resettlement, IE the laptop computer settings to factory default, I'd like to downgrade to 1.00 if possible.

  Experts have ideas? And is there a way I can reset the firmware?

  Maybe I could remove the drive from the system-> devices and let XP Reinstall for me?

  Hello

  > I don't know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincidence to stop working right after that I reinstalled XP.

  Of course, it s simply to say the drive is dead because everything looks like a hardware malfunction. Most often the power calibration error appears because of the drive lens can't calibrate in the right position and thus cannot read some CD or DVD s s or it of not possible to write about them.

  But maybe you are a lucky man and might try this procedure:
  -Try to remove the drive physically from the Bay for laptop
  -Restart the unit without the drive
  -In this case the operating system should start from the HARD drive
  -Close the notebook then reinsert the drive unit in the Bay of s for laptop
  During initialization, the laptop should recognize the drive and must pick up the firmware

  Then you can check if you can burn the DVD again, otherwise you will need a new drive

• The CD/DVD drive power calibration error - Satellite A100-646

  Hi all

  I have a problem with the DVD-RAM of my laptop. I can not burn cd/DVDs, show error message is "power calibration error".
  Can I fix it myself?
  I tried to change the blank media (CD/DVD), cleaned the optical lens. S.O. Vista Home Premium
  The unit of DVD - RAM, it is MAST * A DVD-RAM UJ-850 s ATA Device Ver = 1.10 firmware

  Tanks a lot
  Best regards

  Fabrizio

  > I can fix it myself?

  Do not think that you will be able to solve this problem, because according to the error message, lens driver cannot calibrate in the right position and that's why the drive can't burn any DVD or CD.

  This is a mechanical problem and to my knowledge, the drive must be replaced.
  For assistance, please contact the ASP in your country. They should replace the disc with the compatible and supported a.

  If the warranty is valid should be done for free.

  Good luck a cheers

• Satellite A505-S6005: creating recovery discs power calibration error

  Hello

  just bought a satellite A505-S6005 and try to create recovery discs.
  I am using Dynex DVD - R.

  He created the 1st disk after the slightest mistake 2 times and when I started the 2nd drive continued to get again the message that is OE01BS-26 error Code - 2 said A 037303 power calibration area error occurred, check the disk for dirt or scratches.

  The disks are not scratched, and after going through 5-6 discs wonder if something is wrong with the optical drive & not the disks.

  Any help appreciated.
  Thank you.

  Hello

  I think it's a problem with your DVD media
  You are using incompatible disks!

  Try different DVD from different manufacturers.
  I m using the Verbatim or TDK DVD-R and my CD/DVD drive handles these discs without problem.

  Check it! I'm sure this will help you!

• Recovery DVD creation error - power calibration error has occurred

  Hello

  Tyring to create the recovery DVD, but after a few minutes the following message appears: Power calibration area error has occurred
  error code: 0e01b5-00037304
  Please check if dvd is scratched or dirty.

  I have already lost 4 DVDs (brand new in box)
  Y at - it another way to create recovery DVDs or is it enough if I have the recovery saved on drive D?
  Thanks for the help

  To be honest, it is a good idea to create recovery DVDs. It can happen that the HARD drive will be defective or for any other reason, you will not be able to access the saved on the second partition recovery image. If something goes wrong, you can use recovery DVD to install OS and have once again the factory settings.

  I don't know what the problem is here, but I advise you to use DVD-R virgins only. Buy TDK or Verbatim and it works well.
  Believe me, that I have created about 20 DVD recovery by always using the same media. Whenever it worked correctly.

  Theoretically, you can only have the recovery image on the second partition, but you can not install other OS. Score structure cannot be changed. Believe me it's much better to create recovery DVDs.

• Satellite A350-10 b - power calibration error DVD - RW TS-L633A

  I have a problem with recording DVD Toshiba Recovery Disc Creator. I get the message as "an error has occurred in the calibration power" error code: 0E01B5-26-00037304
  Already lost 2 CD and I have no intend more.

  I tried to download the latest firmware, which must have a version of link Samsung SC05: [http://www.samsungodd.com/eng/Firmware/Firmware/Firmware.asp]. I don't understand why Samsung doesn't support the drive installed in a Toshiba laptop.

  When agile Toshiba launches new firmware for TS-L633A?

  Hello

  > I have a problem with recording DVD Toshiba Recovery Disc Creator. I get the message as "an error has occurred in the calibration power" error code: 0E01B5-26-00037304

  This message always, if you try to use fully compatible diskettes.
  It of not always called firmware or defective CD/DVD drive.

  Try to use different drives from different manufacturers.
  I use R TDK (CD and DVD) and I m pleased with most of my devices (CD/DVD drive, stand alone DVD player, PS3, etc) treat this type of disc properly.

  But I had similar problems with other discs...

• Power calibration error

  I use Nero Burning Rom, with a brand new Lenovo W500. I have Vista Business 64 on a new installation.

  I get an error of calibration of power when burning a DVD using Nero and the DVD-RAM internal drive (MAST * beep * A DVD-RAM UJ862A). I don't get this error when you use external DVD burners.

  I've read about using google searches and it looks like a hardware error. Could I get a support staff to look into this?

  Thank you

  I was able to burn a DVD, even if it was another brand of writable DVD. It seems that the writer is sensitive to the DVDs I use. I have not seen this kind of behavior since the 1990s with the CD - Rs and it's disappointing.