Equium L350D - 11 d - I should update the BIOS?

Similar Questions

• Satellite 1000-Z2: driver Intel GPU does not - I should update the BIOS?

  Hello

  I just downloaded and installed the latest driver for satellite 1000 Z2 graphics card which is Intel(r) 82830M chipset Driver revision: 6.14.10.3889. However, it does not work.

  I wonder if I should update my BIOS first. Thank you

  Hello

  It s always a good idea to update the BIOS. Thus, it would be the best you try the BIOS updated and then reinstall the graphics card driver. You can also (if it isn't already) check www.intel.com and download the drivers from there, they are sometimes more up-to-date than the drivers of toshiba. :)

  Please give some comments if the installation of the graphics card took place after the BIOS update.

  See you soon

• Error when updating the Bios Equium A60-155

  Hello.

  Here, I have TOSHIBA Equium A60-155 MODEL No.: PSA67E - 00300C8J

  "I tried to update the bios, follow this thread" [http://laptopforums.toshiba.com/t5/Drivers-and-Utilities/Equium-A60-BIOS-Update-Problem/td-p/99434] ".

  but I got the error, as in the screen:
  [Photo: http://qgwbrw.bay.livefilestore.com/y1pZJ7VOj2nrffkqrqlCXuwOHdILOPKPqWuCT0i3MoAuv6p5QR k1WSwQm3APFZIodBVIdL807fC_a_RAYR79W1XqWSpSh5x9cVw/13072010395.jpg? psid = 1]

  Hello

  Looks like you want to update the Bios back-base. You can download windows-based BIOS:

  http://img830.imageshack.us/img830/7228/78420804.jpg

  Note, updating of the Bios, close all running programs running, including antivirus, disconnect from the Internet. However, if the system works well. should not touch.

• Can Equium P200 (PSB5E) - I update the BIOS on Windows 7?

  Hello.

  My question is: how to upgrade the BIOS under Windows 7? My Bios version is 1.70, I've seen, this version 2.50 is available for download, but only under Vista.

  Can it run Windows 7?

  Hello

  First question;
  Why do you update the BIOS?
  Is the reason for this?
  If the laptop runs successfully a BIOS update is not necessary!

  Now back to the issue of BIOS;
  Some laptops have special need BIOS for Win XP or Vista.
  So if you are using XP or Vista, then you must use the BIOS that was designed for one of these windows systems on the European driver Toshiba page you can see a column of OS that provides the info for what BIOS OS is designed.

  But in most cases, the BIOS is OS independent, which means that you can use it in any Windows operating system.

  Simply said; If the BIOS is available for Vista, then you can only use it with Vista.
  If it s independent OS, you can use it with Win 7, Vista or XP

• Equium A110-276: can I update the BIOS when installing Vista?

  I don't know where to post this...

  "I have a clean install of Windows Vista on my satellite A110-276. I have to update the BIOS or not? Is - mandatory/mandatory BIOS update?

  Hello

  It seems that Toshiba has released a special version of the BIOS for Windows Vista.
  If you want you can check it on the page of the Toshiba driver.

  But if your Vista runs correctly on the computer laptop with the previous version of BIOS you n don't need to update the BIOS.
  I recommend updating BIOS, if any odd operational behavior will appear.

• Impossible to update the BIOS on Equium L350

  I tried updating the BIOS on my laptop but when I run the update I get the message "the ROM file is not newer than the BIOS. I've updated all the others drivers drivers optical drive, when I run the update to do this I get the messagae that they are not compatible, even if I download the correct one for my model.

  Any ideas please?

  Sorry my friend, but I do not understand what you want to hear now. It seems that you are a fanatic of the update ;) Just a joke!

  As you can see it the downloaded version of BIOS is not an end of history was updated.
  Driver optical drive? Can you please tell me what it is? What is the name and version of the file that you want to install?

• Satellite A210 - update the BIOS didn't

  Hello

  Just tried to update the BIOS on my Equium A210, everything went well until the closing and restarting (which failed).
  He left me with a black screen and an orange to power lights, no back to zero and I only can we get rid of the orange light if I remove the battery.
  OK, what I'm doing now?... is this repairable?

  See you soon

  > OK, what do I do now?... is this repairable?
  Yes and no.

  You can't fix this, but the ASP technician can do that.
  Therefore, you will need to contact the ASP in your country, to solve this
  The technician would be able to Flash the ROM module and I think this should help you.

• Satellite Pro A120: Need to update the BIOS after upgrade CPU

  Hello

  I have a Toshiba Satellite Pro A120 and I need to update the bios of a change in cpu cause.
  The laptop works very well, but for some reason any with the new processor fan runs always full.

  A lot, I searched but found nothing.
  The model number is PSAC1E-0QL04CG3 of ideas where I can find the bios?

  THX in advance,
  John

  Hello

  First of all: update BIOS doesn t help you.
  Why do you think that BIOS update should help reduce the activity of fan?

  I guess that your new processor is faster. Right?
  So it offers more performance and this leads to higher heat dissipation... so finally the CPU must be cooled and this can be done only if the cooling module would turn faster you agree with me?

  By the way: the update of the BIOS is on the page of the Toshiba UE driver. Since the satellite Pro A120 is very old series, you will need to search for drivers in area Archive (Type of product-> Archive)

• Portege R830/PT321E: update the Bios stops with "year error occurred while...» »

  Portege R830/PT321E: update Bios end with ' year error occurred while preparing the environment of update...» »

  Following message appears first

  BIOS version: Worm. current 3.40-> update version 3.70
  THIS Version: worm. current 1.30-> update version 1.50
  BIOS and THIS should be updated

  During BIOS update seems following message:

  + An error occurred during the preparation of the updated environment. You have not given permission to run the update. +

  My settings:
  -BitLocker is turned off.
  -No connection to a docking station
  -Windows 7 is installed
  -Boot mode is enabled? I guess that means:
  "Close all open programs, shut down windows and then turns off your computer."

  Any idea what is the problem?

  Post edited by: ML

  Hi ML

  Stupid question maybe now but why do you want to update the BIOS on this, I think, fairly new laptop model?
  Have you noticed a few issues or hardware issues?

• Update the BIOS - protected A600 problem

  I'm trying to update my BIOS settings on my laptop (that I was invited to do by the service of Toshiba hardware update).

  I followed all the instructions provided by the program because it extracted and ran the update. However, the computer began the reboot process, but has been 'disconnected' windows (Vista Business) for about an hour now. I don't know how to stop the process without causing serious damage to my BIOS, but this does not seem normal.

  Help, please!

  Hi wilreb...

  I think that the user henharas a bad experience with the BIOS updates.
  I updated the BIOS many times and never had any problems...

  I assume you mean on Tempro software... this software informs you about updates on the Toshiba page. It is not a recommendation for an update, but simply an alert that new updates has been published...

  If your laptop is running properly, then update the BIOS is not really necessary...
  You must follow these tips; never change a running system ;)

  In any case, after the update of the BIOS shouldn't take too long and if she has completed, you should see the new version in the BIOS settings...

  Check it out...

• HP Omen: update the BIOS

  HP support assistant shows that there is the following update:

  HP notebook System BIOS update
  Number SoftPaq SP74378
  version F.34Ap1

  tried to download and install without success

  should I worry?

  Thank you

  Hello

  Thanks for posting in the Forum from HP Support.

  No, no need to worry.

  Updated the BIOS/UEFI is not a critical task and I would say that you leave like this for now.

  General recommendation I provided to users/customers is NOT to upgrade the BIOS/UEFI, unless they live any sort of BIOS/UEFI problem specific. Just for updaing and update just for the use of the latest verson is not the solution. Any type of update (no matter what and that relesed it) can solve 2 problems but can introduce more than 10 questions. In addition, upgrading the BIOS (for any provider) are risky more because the BIOS recovery is not that easy compared to updates of typical software IF something goes wrong.

  Update/update IF you have any specific questions that you know have been fixed in the new version or for some serious security issues. Otherwise, keep the existing version as long as possible.

  See you soon!

• Impossible to update the BIOS on Satellite A665

  Hello

  I desperately need help with update my BIOS on Satellite A665 that my battery won't charge and the site said to me updated the BIOS, but it is not letting me update battery is less than 10%.

  Please someone help me because I have no way to use the laptop without power still present.

  Hey Buddy,

  Can you charge the battery when the laptop is turned off? Usually battery LED should show you white and orange color to the loading process if the battery is fully charged. And then start the computer and update the BIOS.

  Try to update the BIOS on the pre-installed Windows version?

• Satellite M60 - cannot access the HARD disk but update the BIOS

  Hello

  I want to update the bios on a Satellite M60
  the problem is that I can't access either on my hard drive it still reboot

  So, first I want to try to update my Bios but as I can't work with windos XP I need to do it with a Dos command.

  is there any solution for this?

  Thank you very much

  and why you want to update the BIOS?

  Even if the BIOS is not updated, the laptop should work well and should start the Windows operating system.
  This means that the problem with your laptop is unrelated to the old version of the BIOS.

  Have you tried to check the HARD drive or to reinstall Win XP?

• Portege R100: Try to update the BIOS of 1.20 to 1.60

  Hello

  I have a Toshiba R100 and try to update the BIOS of 1.20 to 1.60. However, I just get 'different ROM version' when I run the update.

  The model number on the bottom is P2010 - this is slightly different from a R100? If Yes, where can I get a BIOS update?

  Thank you

  Hello

  Well, I found the BIOS version 1.6 of 30.9.05 on the Toshiba driver page.
  This version should work properly.
  I guess you tried to upgrade the BIOS with the win version. Please consult this document:
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  You will find information how to upgrade the BIOS on the R100. You must use the trad-BIOS version.

• Problems after updating the BIOS on Satellite Pro P200

  I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.

  After updating the BIOS, I have now two problems:

  1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]

  2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.

  Basically, I want to get everything working again as it should, but cannot find any information on these issues.

  After further review, it appears that the update of the BIOS is not the cause of the problems.

  Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.

  After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.