Equium L40-156: graphics card problem - error code 12 in Device Manager
People of the night...
Just got a family run Vista premium, Equium L40-156, everything is going well except a little problem with the display adapter (Mobile Intel 965).
Tried the drivers that I had with the installer
Tried the drivers from the toshiba download page
Tried the drivers on the Microsoft Update site
Tried the drivers from the website of intel
All have the same problem, in Device Manager, it shows with an error (the pretty yellow triangle with the "!") with an error code 12 (the device cannot find enough free resources) even after a system resart.
Switching view hidden devices displays a 2nd same device, but works correctly, but the two disappear if I try to delete either.
Display settings do not display a connected device, DXDIAG had no idea either.
Latest version of the BIOS installed, all other devices are very good and can not see an IO overlap anywhere
Any suggestions, greatly appriciated
I have studied a little bit and looked on the Microsoft page for some answers and found out what exactly means the error code 12.
+ Error code 12 +.
+ This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12) +.
+ Two devices are assigned the same i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or a combination of both). This error message may also appear if the BIOS did not allocate enough resources to the device (for example, if a (USB) universal serial bus controller is not an interruption of the BIOS because of a corrupt MPS (Multiprocessor) system table). +
Well, what to say; usually this error message should not appear with the original Toshiba preinstalled operating system.
I put t know if you have changed something or add an additional device, but it would be very interesting to know if the same error message appears after the reinstallation of the OS.
You can use the Toshiba Recovery CD/DVD of restoration!
All the drivers, the tools are already preinstalled on the recovery CD so the entire procedure will not take very long. about 10 min.
Check this box and report if the same error is displayed on the laptop with the factory settings!
My AW-18 does not correctly detect my GTX - 770 M (x 2) cards and display them in the Device Manager. What I see is that in the other devices section, there are two unknown devices listed, one of which I already know (not related). Any GTX cards appear in graphics cards.
Also, when I try to install GeForce experience, I get an error saying that I don't have cards chart for this program. It allows to launch fine until today (December 15, 2014).
This PC has a hard drive erasure and system reinstall in its history. It is possible that this point has been like that for this event.
The Hardware Id info on the elements of the mystery are as follows:
ACPI\VEN_SMO & DEV_8810
So I guess I have two questions;
(1) can you tell me what is this mystery device?
(2) why can I not see my graphics card in Device Manager, despite all the usual activities like the search of new hardware, drivers, etc..
Also note that I had already run the troubleshooter from Dell and it detected no problems.
I found a solution myself.
I looked at the BIOS settings by the F2 key at startup, and the only thing I could see I could try was to restore the default settings, so I did. My PC booted then up normally but for low resolution. Device Manager now showed two graphics cards, so I ran the installer of the latest GeForce drivers and the PC works now perfectly once more.
I buy a system with the following specifications.
Win 7 ultimate 32 bit
with intel motherboard DH61WW
When I install the drivers for the graphics card, I got error in the management system saying code 12
"This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system. »
I have the latest version of the driver software
Thank you Sir,I solve the problem by myself...!There was a reader of "AMD 3gIO filter" problem is a conflict I do system restore and install the new driver successfully...
I bought a new sd card! I connect the sd card to your pc to transfer files. The sd card is 32 GB micro sdhc class 10. and the android phone is alcatel pop. c9, but the problem is not with the alcatel but with the sd card or the pc! at the beginning I normally load sd card photos, videos and files. but then is approximately, it shows a messagage error code 80070570 0 x and then the sd card does not work normally because it seems that some files and the names of folders as Chinese letters and his strange also because the report has large capacity (sometimes 70 GB said on this weird folder properties). This happens only when I transfer files from pc to card a few minutes!
- I format the card several times, I even tried to fat32, as ntfs, also through the format of phone Android, but nothing has changed.
- antivirus different i three Runic (each separated from each other), but there is no virus in the sd card!
- I also tried defrag on the sd card.
- I also tried through windows 7 error checking.
- I also tried to format it to Go lower, for example at the maximum capacity of 20 GB.
None of the above worked. I am so disappointed and I don't know what else to do.
Please, help me!
Thank you in advance,
at this point, no matter what choice I'll click (I want to say, cancel, retry, skip), the result is the following photos:
HelloThanks for the update on the issue. I appreciate your efforts to solve this issue.
Unfortunately there is no such Microsoft Software to the task that you have requested. However, you can search on your favorite search engine for such a tool that can do the task for you.
In addition to this, I suggest you replace the SD card because there could be problems with the card. You can contact the SD card hardware support team for assistance.Hope this information was useful. In addition to this, feel free to answer in the case where you are facing in the future other problems with Windows. We will be happy to help you again.
I have a toshiba satellite L40-139 and I just instaled windows 7 64 bit on it. Since that time my atheros wireless device will not work. I tried updating the driver and windows but nothing.
In the device manager says code 10 DEVICE can NOT START.
If you read here:
The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
Then, go to the page of the driver and update the driver. If you do not have to win 7, try the vista driver.
I have a 43 error that keeps appearing and disappearing. USB devices worked for a day then stopped working since. It started sometime in March, and now they are not coming back. The USB mouse lights up as if it was on and lights up when you move like its supposed to do but it still does not work. The keyboard does nothing. I am currently using a ps/2 keyboard. I have a Windows 8 Inspiron 660 computer with a motherboard Asrock z77 pro4 and a gtx 275 graphics card. Although my windows is not 'true' so to speak I bought it on its Web site. I have also 2 monitors connected, one to the motherboard the other to the graphics card. In Device Manager, the "unknown devices" are sometimes there and sometimes not. So far, I have tried
- Uninstall the usb ports controllers.
- Download the latest drivers for my device.
- Update the computer several times.
- Unplug the unit and plug the usb devices.
- Plug my camera on other computers and they worked,
- Connect the other devices work in my computer that did not work.
- Thanks to the Fixit kit which does not work.
I was wondering if I pay for support and it does not solve my problem I would get a refund or not. I have also to documents on when usb devices worked.
When the Board of Directors and the mouse worked it showed in Device Manager but the "unknown devices" is a not disappear, even if the keyboard and mouse were the only things connected.
I just noticed that my "Standard Enhanced PCI to USB Host Controller" has an error of 45 and he said: it's not connect. I don't know what this means, but it may be useful.
It is an error 45 and he says its not connected, it seems important.
Thanks for the reply.
I'm sorry for the late reply.
I suggest you try the following steps and check if it helps.
Remove all USB devices connected to the computer.
b. press Windows + R keys, type regedit into the run window and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
(c) in the navigation pane, search for, and then click the following registry subkey:
d. in the pane of details, right click 'LowerFilters' and then click 'remove '.
e. click 'Yes' when prompted.
f. close the registry editor and restart the computer.
Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
I hope this helps.
Original title: No Sound Device
My sound stopped working. Audio device is a High Definition Audio CODEC IDT. I tried all the updates (hardware and software). In the process of troubleshouting with Device Manager, I get an error code 10. I'm just trying to get my sound card to work. How can I make it work again?
See the following article to resolve this issue.
No sound in Windows
Here is an article which related errors Description 10 Code that generates the Device Manager.
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
I recently bought a laptop computer used by my friend, an Equium P200
I reinstalled Vista and downloaded the correct drivers and everything works fine apart from a Wi - Fi connection.
I took on the key board and checked that the mini pci card in properly installed and even tried it exchanged for another
The system crashes to recognize that one is plugged, when you go to the device under network drives Manager only Realtek LAN is listed (which I suppose is the Ethernet Jack)
The WIFI card is an Atheros AR5BXB63
Any help really appreciated.
Some unknown device is listed in Device Manager?
Original title: code41
I went to the Manager of devices-uninstalled cd & dvd, rebooted, devices are see the watch but always error code41. When I insert a music cd, the Unit looks like it is will start up, then stop? I also tried the Fix - it on the web site, still does not? Any ideas?
Try the steps suggested in the given below link and check if this is useful.
Note: In the article below try the manual steps for the removal of the filters and check if that helps.
This problem may also occur if you install a non-Plug-and-Play device driver, but Windows cannot find the device. Here are some things you can try to solve this problem.
If the Troubleshooting Wizard does not resolve the problem, do one of the following:
· If the device was removed, uninstall the driver, connect the device, and then clickScan for the hardware changes to reinstall the driver.
· If the material was not removed, the driver files may be obsolete. In this case, update the driver in Device Manager. In the device properties dialog box, click theDriver tab and then click on update driver to start the theHardware Update Wizard. Follow the instructions to update the driver.
· If the device is a non-Plug-and-Play device, you may need to install a newer version of the driver. To install non-Plug-and-Play devices, use Add Hardware Wizard. Click Start, and then clickRun. In the Open box, type hdwwiz.cpl.
Hope this information is useful.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
I had some difficulty trying to get my webcam on my laptop working again.
Tried to install a new update but it would not work because of some error - 10 of the Code.
I tried to uinstall using camera Toshiba as well and re installed and that would not work due to some files of corona that she did not.
Please help me really want this camera to start working again!
What of your OS (operating system)?
No info on this subject? ... Why?
In your case, I'll try this:
Remove the old webcam driver and reboot the laptop.
Run CCleaner to clean the registry and Windows
Stop and try again
Install the latest driver from the Toshiba page.
problem with the hardware and the driver msharoknian
Take a look at this link for complete list: http://pcsupport.about.com/od/fixtheproblem/tp/device_manager_error_codes.htm
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
Microsoft Tun Miniport adapt #2 /.
Microsoft Tun Miniport Adapter #2 / it is disabled (code 22) / this device cannot start (code 10). I need help to activate the network adapter.
Description: Broadcom 802. 11b / g wlan - Packet Scheduler Miniport
Device ID: root | * tunmp \0001
status 0 x 01802401 has problem
0x0000000a problem (10)Hi GGisin,-Did you change on your computer before this problem?
Follow the steps listed in the article below for the mentioned error code:Note: The information provided in this article are applicable to other versions of Windows XP as well.Additional reference on:
Original title: WAN miniport driver
A yellow sign appears on MINIPORT Wan (IP), MINIPORT (IPV6) AND WAN WAN MINIPORT (NETWORK MONITOR) for this reason I have not access to internet to throw bluetooth tethering that even he does not connect. In the properties of the driver, it indicates:-this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)I use windows 8 in my sony vaioMODEL - SVE15123CNW
Perform the steps suggested by Nirmal S from the link below and see if it helps.
Answer please if you have any questions.
I have an Equium L40-156. When I press the power button the power led lights up, but there seems to be no hard disk activity. I manually turn off by pressing the power button for several seconds, leave it for a few seconds and then press the power again button once it starts normally.
Any ideas please?
Have you recently updated your BIOS, installed a few more RAM / another HARD drive or software? Perhaps some update driver?
Since when the error pops up? And you have always guaranteed on this subject?
So, if so, then bring your machine to an authorized partner and let check your machine. Would be the best...
We have a laptop Equium L40-156.
We have the problem with a microphone!
We can hear people calling us (via Skype), but they can not hear us.
Is it possible that we do not have a microphone inside a laptop computer?
Or is it something wrong with the setting? Thak you
Have you checked the device microphone in Skype options?
This device has been chosen?
In my opinion this laptop was not equipped the internal mic. You will need an external!
Maybe you are looking for
Since I downloaded one of your updates (taskbar?) I couldn't get the 'latest news '. It is just stuck on a previous one and says "cannot open live bookmark". I clicked on 'reload live bookmark' and nothing has changed. Any ideas? Mike
I put the function 'disable' & restarted the system & the external drive USB powered stayes & the USB mouse will wake up the system from standby mode. I can't turn it off! Any ideas? If the system is idle, can I plug a USB device into one of the 4 US
not serious... I am back... I did a little reading and tried to read another cd in the drive and the message came to say "can't play because the dvd decoder is not installed, so I guess that's the problem because I have a recovery * DVD *.» Anyone kn
Where to download recovery XP for a Mini 1151NR?
I recently bought a HP Split X 2 of Best Buy, and I like it so far. I read in the preliminary comments for this product that the CPU can be i3 or i5, RAM can be upgraded up to 8 GB and a hard drive can be placed in the keyboard. I realize that it i