Equium L40 - 156 - WLAN indicator sometimes does not work

Similar Questions

• Equium L40 - 156 wlan need driver

  Hello

  I recently had reinstall Vista on my laptop EQUIUM L40-156 but missing the drivers.
  In particular, the wireless network lan card driver (use another pc to connect to the internet!).

  Can someone point me in the right direction for the right drivers? As I have tried several drivers, but the operating system does not recognize any as being good.

  Any help is very appreciated.

  You will need drivers for Realtek RTL8187B on your laptop.

  Go to this page to download from Toshiba:

  http://EU.computers.Toshiba-Europe.com (Support & downloads)

  And download the Realtek wlan drivers. Make sure you only select your laptop model and the operating system. I assume you are using the 32-bit version of Vista to the standard address.

• Equium L40-10 X - audio drivers do not work on Windows XP

  I recently reinstalled XP on my equium L40-10 x. Unfortunately, the audio drivers from the Toshiba support site does not work for me - are there other drivers that are known to work?
  I didn't load the available disks and need something on the net - link?

  Thank you.

  Hi cecilrosa,

  I n t have Equium L40 but I'm pretty sure that the audio drivers are working properly. The point is that you need to first install Service Pack 3 before you can install the audio driver.

  So to remove the current sound driver and install Service Pack 3 for Windows XP. After that, you can try reinstalling the audio driver.

  Check this box!

• Multimedia keys sometimes does not work

  HP Pavilion DV4 1290el

  Windows 7-32

  Multimedia buttons sometimes don't work (buttons on wifi/audio/multimedia etc. etc. at the top of the keyboard)

  My company send me a new laptop (HP Pavilion DV4 1290el).

  Multimedia keys sometimes freezes and does not work. Then I can't turn on the wifi radio.

  I tried:

  -update the firmware (F.66)

  -Reinstall the driver of quick buttons

  None of them does not solve my problem.

  Any suggestions?

  Thank you very much

  Hello

  See if a reset helps the issue.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the power adapter and start Notepad.

  Kind regards

  DP - K

• multiply sometimes does not work

  Hello

  IM work in cs6 effects to a movie. Im making cars that move and im trying their shadows to move separately.

  teas cars are all moving of their own composition and possibly added to a final composition where you see a lot of cars on a road.

  Here's my question:

  each separate car has its own shadowlayer that I imported a separate psd file.

  I multiply those layers of shade using the CTRL on my mac and when choosing the mode of fusion and then choosing to multiply.

  This works fine most of the time when I have a look at the final model (where all the cars are together), but sometimes it isn't and the shadow remains a standard solid color. I compared the comps that work with those who are not, and I see really no difference at all.

  However, it works when I add the shadow layer in the final model.

  I tried recording first... or that you restart. This may be a bug maybe?

  

  In the model

  

  in the final model (does not work)

  

  In the model of car

  

  In the final model (this one works very well)

  I just found out what it was!...

  apparently this little sunsymbol belonging to woking no model was not turned on in the final model. I feel pretty stupid it was... but glad that it works.

  It must be 2D. It is the style that the customer approved. Indeed, adding the model background in my truckscomp wouldve done the work... I tried... but it would have messed up my system. and as you know... im not an expert in sequelae still

  Thanks a lot for your help!

• Satellite L40-18 X - wireless switch does not work

  Hello

  I installed Windows 7 on Satellite L40 - 18 x, PSL48E, the installation seems correct. After installation I noticed that the wireless switch on/off (power) switch does not. The wireless network is working except the functionality of switch.

  It worked on Windows Vista. I installed all the up-to-date drivers for the network card wireless, including atheros, configfree, chipset drivers, but no effect.

  Please can someone tell me the possibole solution?

  concerning

  Salahaddin

  Hello

  I agree with resident.
  The Wlan switch on the side of the laptop has all the drivers and it works independently of the installed software!

  The FN + F8 key combination that allows the WLan should work on if install you value added package.

  You should also check if the WLan card is set on IT in Device Manager-> properties-> Advanced tab WLan card.

  See you soon

• Smart keyboard sometimes does not work

  I have a smart keyboard connected to an iPad 12,9 Pro.

  Sometimes it stops working and I have to restart the iPad be responsive again.

  This is quite annoying because it happens 4 - 5 times a day.

  I think it's a software problem. I look forward to a solution from Apple.

  Hello alessandro2410,

  Thanks to ask questions on your Smart keyboard doesn't work don't not with iPad Pro sometimes. I understand how it is important to have a functional keyboard at any time since everything we do these days is on our devices. I'm happy to check this with you.

  To make sure the Smart keyboard until properly, I want to double check all of this help article: use your Smart with iPad Pro keyboard. If everything is correctly configured, at the end of this article is the section to get help, if there are any questions by using the intelligent keyboard with iPad Pro. If the keyboard stops working, I try to adjust the position of the iPad for a while and then re - implement Type position. I would like to ask some clarifying questions to try to win because of that.

  1. have you setting the position of the iPad for a moment, then put back in the position of Type help or you must go through all the steps, and he only reconnects after restarting the iPad?

  2. when it stops working? You mentioned that it does that 4 or 5 times a day, but it's after the iPad goes to sleep, or after you do not use it for 10 minutes, you can isolate when it no longer works to offer other options?

  3. have you noticed the disconnect keyboard started after 10 iOS upgrade only?

  Please provide information and work with me here in Apple Support communities. Have a great rest of your day.

• eHome receiver sometimes does not work after restarting

  Sometimes my Receiver USB ehome stops working after a reboot, and it has the most recent drivers from Microsoft that is the only driver for the device. I use it with Windows Media Center, and sometimes it doesn't work after reboot, or after the release of sleep. I tried to disable USB suspend but which did not work.

  Hello

  Thanks for posting your question on the Microsoft Community.

  It should be the following information so that we can help you further:

  What happens to the eHome USB receiver when the system restarts or wake mode 'sleep'? It gives you an error message, or simply, it does not?

  Verify that all devices are connected to the USB.

  Try to uninstall and reinstall eHome receiver and check if this solves

  Remove the pilot of transmitter/receiver infrared (IR) of the Windows Device Manager to force Windows to reinstall the driver. You don't have to restart the computer when you perform this procedure. To remove the pilot of transmitter/receiver infrared in the Windows Device Manager, follow these steps:

  1. Click Start, right-click my computer, and then click Properties.
  2. In the hardware tab, click Device Manager.
  3. Expand Human Interface devices.
  4. Double-click Microsoft eHome infrared transceiver.
  5. On the tab driver , click Uninstall, and then click OK
  6. Disconnect the IR receiver to the computer.
  7. Wait 30 seconds, and then reconnect the IR receiver. Windows the receiver automatically detects and installs the appropriate driver.

  In addition, update the last chipset and drivers USB of the manufacturer's Web site.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-isn ' t-work correctly

  Check in the BIOS if no energy saving option is enabled for the USB ports:

  1. Restart the computer.
  2. When the manufacturer logo to enter the BIOS settings, press "F2" . (The exact key may vary and is usually displayed on the screen for the system to start).
  3. Go to the "Integrated Peripherals" menu using the arrow keys. If your BIOS does not have a menu on-board devices, select "Advanced BIOS Features".
  4. Select "USB controller" using the arrow keys and press 'Enter' to change the setting of "disabled" to "Enabled". Once disabled, the computer does not recognize USB devices when connected.
  5. Press "F10" to save the settings and exit the BIOS.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this helps. Please get back with the results.

• Equium L350 - 10L PSLD2E: FN + F6 does not work under Win XP

  Hello

  I have a laptop Satellite L350 - 10L PSLD2E and just have it downgraded to XP of the original Vista.

  I have all the drivers set up were needed, that didn't they no yellow question mark in Device Manager.

  My problem is that I can't change the properties of the screen.
  The screen is high heat and using the button with number F6 FN does not bring the brightness.

  All the options of the FN do not work.

  Anyone can guide me please to sort it?

  Thank you very much

  Hello

  Have you installed the common Module and Hotkey Utility?

  The common Module software is an essential element for the use of the FN button.

  It should be installed first

  Please download and reinstall. In my view, this should allows to get the functionality of the FN button.

  See you soon

• Pavilion dv6tse - 3100: laptop screen turns sometimes and sometimes does not work

  When I turn on my laptop, there is a chance that the monitor does not light. What to do when this happens is I turn it works again and again until the screen lights up finally. When it lights up, it works very well and stays on until I turn it off and then the problem can repeat once again. Notes: I tried to connect to an external monitor and the TV via HDMI, and there is no signal when the monitor won't turn on, but works perfectly if the monitor does not light. If the screen lights up or not, everything else seems to work fine as I can blindly off keys and hear the music of connect/disconnect.

  Please help me!

  Hi brianh123,

  Without a doubt, a connection problem. You can give us a call on repair options. You can reach HP Total Care at 1-800-474-6836 in North America. If you are the guarantee, there will be a charge. If you want to do on your own here is the Maintenance and Service of Guidedv6. Your model may have two different display types depending on what you choose when you bought originally.  All of the Touchsmart screen is page 72 and BrightView display Assembly is located on page 77. Use the appropriate section to check the connections.

• T510 brightness adjustment sometimes does not work

  Hello

  I had some problems with the brightness of the screen on my T510.

  Sometimes after returning from standby / sleep I can't control the brightness of the screen at all (by Fn + start/end or PowerManager chaning do not work).

  I had last nNvidia drivers NVS 3100 M.

  Anyone know any solution for this problem?

  Thank you

  Lordiik

  @Lordiik,

  Reinstall the Hotkey patch + manager of power power management driver.

• Equium P300-16 t-Jack headset does not work

  Last night my headphones were works well with my laptop but when I tried to watch something earlier that my headphones would not work, but they still work if I plug it into my phone.

  And what is with portable speakers? They are turned off when you are using the headphone jack?
  When you disconnect headphones are pregnant again?
  It would be interesting to know if the little maneuver works correctly.

  One last thing: are you sure that the headphones are connected correctly?

• Equium A100-299-CD/DVD-ROM does not work

  My CD/DVD-ROM on my Toshiba Equium A100-299 won't work, do you have any idea why?

  I tried to fix it by changing the IDE secondary channel IDE ATA/ATAPI in PIO Mode only, but it doesn't seem to work...

  I get famous I I/O-warning, whenever I try to open programs and DVDs on it. But it works when I put an audio cd...

  Hello

  If all goes well it s not a malfunction of the equipment.
  We should be optimistic ;)

  Check this box: go to the Device Manager and remove the drive from the device.
  After restarting again, the operating system should recognize and initialize the disk again.

  In addition, you can try to clean the lens gently and carefully, maybe it helps

• While typing cursor sometimes does not work as expected

  While typing cursor sometimes goes to the next tab or the end of the paragraph. Characters are removed automatically.

  Cursor sometimes goes in the middle of the sentence. It is very difficult to write anything.

  Please suggest the solution. Any help is really appreciated.

  LTY

  Keyboard works in a weird way

  It is likely that your keyboard is a failure.

  If yours is a desktop computer, the solution is very simple and cheap.  Replace it.

  If yours is a portable computer, the solution is more expensive and difficult because it requires the services of a competent technician to disassemble the PC until a failure can be deleted and a new facility.  Warning, ensure that exactly the correct replacement is used.

  Another solution for a laptop that is easier and less expensive, but not so nice is to simply plug a USB external keyboard.

• The arrow keys sometimes does not work in text boxes

  I have a recurring issue which is really annoying: my left/right arrows (including CTRL + arrow keys) randomly and occasionally do work not when entering text in some text boxes on some Web sites. This never happens in unformatted text boxes 'simple' (Facebook, search fields, this box very I type in...), but unpredictably longer complexes (WYSIWYG editors, new comments youtube...).

  I tried to disable all extensions and run Firefox in safe mode and it * seems * have solved the problem, although I can't be sure and I can't isolate which he might be, given that the problem occurs randomly extension: on the same site, it will happen and then not happen.

  I'm on Firefox 25.0, although I've had this problem for years with countless versions of Firefox.

  The extensions I have installed and enabled:

  Like Adblock
  Bamboo Feed Reader, dimmer, Download Helper, Drag & Drop Zones, Flagfox FlashVideo Downloader, Flashblock, Flashgot, Grab and Drag, MouseZoom, status-4-Evar, Youtube HD

  Thanks in advance for any help you can give me.

  If it works in Mode safe mode and normal mode with all extensions (Firefox/tools > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change via "Firefox > Exit ' (Windows: Firefox/file > quit;) Mac: Firefox > quit Firefox. Linux: Firefox/file > exit)

  In the Firefox Safe mode, these changes are effective:

  • all extensions are disabled
  • Default theme is used (no persona)
  • userChrome.css and userContent.css are ignored
  • default toolbars is used (localstore - safe.rdf)
  • JIT JavaScript compilers are disabled (javascript.options. * jit)
  • hardware acceleration is disabled
  • plugins are not affected
  • preferences are not affected