Equium L40 - Internet only in safe mode - is not recovery CD/DVDs

Similar Questions

• Vista broke down. Can only use safe mode. (NOT RESOLVED)

  Hey, if my computer worked fine until I tried to install an update from windows. It seems not completely install and just froze, so I closed the window and restarted my computer.

  I then try to connect to my user, and it seems like I'm on a temporary user instead. I could still get into my files, but any changes I've made have not been saved. I said to myself, this is not normal, so decided to do a system restore.

  I restart my computer once again and try to connect. It looks like its about to load, but then says "logout" and goes back to the login screen again = S

  I try to restart, press F8 and put it on safe mode. I try another system restore - no change. I use the command prompt to perform a disk check, no change. I do a virus scan - no viruses. My boyfriend has also checked the RAM, and he can't find a problem.

  Have saved as much as I can on discs and USB. Is there something else I could try, because I really don't want to have to restart my brand new computer?

  Thanks in advance!

  Hi, Boniface,.

  The temporary user account is probably using the locale by default, where the transition to the American.

  What is your computer brand and model?

  You can access the administrator account:

  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  If you can, try running SFC:

  http://support.Microsoft.com/kb/929833

  If this does not help, you can try to check your profile for corruption:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows starts only in safe mode after refomatting

  I reformatted computer my husband, during the process of re-setup the computer shut down & restarted in safe mode. I can't the computer to start Windows normally, it starts only in safe mode or at least what looks like safe mode. I am trying to install Windows XP Home Edition. I was not able to install any device to connect to the internet on this subject, so I can install SP3.

  Can someone help me solve this problem please

  Hi Malinda1979,

  Since you formatted and installed windows, its non-secure mode. Try to install display drivers. You can check if the display drivers are installed correctly click Start-> settings-> Control Panel-> system. Hardware-> display adapters. If you have any yellow exclamation next to any device, you must install the drivers.

  I hope this helps.

  * You need to install all the drivers of your motherboard / driver cd (which came with your pc), including the chipset, sound... etc.

  If it's a laptop brand / Office (HP, Dell, Acer, etc), you can visit the manufacturing site and select the model and download the latest orders.

• Inspiron 6000 connect only in safe mode

  Hi I have a very complicated problem with this dell inspiron 6000 would initially connect to the internet fine and now connect only in safe mode with networking support.

  Windows XP pro, all updates and the drivers installed and the latest drivers for the hardware as well.

  I am connected ATM threw a wired router with the onboard broadcom 440 when in normal mode, I get a DNS error and I am in safe mode without error LOL. I ran ipconfig with each listed switch.

  It is setup exactly the same thing in normal mode as in trunk then yes time for a punt and hope for a field goal.  nothing has been changed any software added recent updates installed were the 8th of this month. It comes from spending a couple of days.

  I used the winsockfix corrupt but also removed all the network hardware in normal conditions and then restarted in safe and removed there as well. Following is the display of the ipconfig command.

  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.

  C:\Documents and Settings\Misty > ipconfig/all

  Windows IP configuration

  Name of the host...: mistysdammit
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: hsd1.or.comcast.net.

  Ethernet wireless network connection card:

  The connection-specific DNS suffix. :
  ... Description: Intel (r) PRO/Wireless 2200BG Network
  Connection
  Physical address.... : 00-15-00-1B-73-0E
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... Autoconfiguration IP address: 169.254.156.42
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :

  Adapter Ethernet Local Area Connection 3:

  The connection-specific DNS suffix. : hsd1.or.comcast.net.
  ... Description: Broadcom 440 x 10/100 integrated Cont
  roll
  Physical address.... : 00-12-3F-E6-C1-E6
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... The IP address: 192.168.1.101
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DNS servers...: 68.87.69.146
  68.87.85.98
  Lease obtained...: Wednesday, April 23, 2008 06:16:41

  End of the lease...: Wednesday, May 14, 2008 02:16:41

  C:\Documents and Settings\Misty > ipconfig/all

  Windows IP configuration

  Name of the host...: mistysdammit
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: hsd1.or.comcast.net.

  Adapter Ethernet Local Area Connection 3:

  The connection-specific DNS suffix. : hsd1.or.comcast.net.
  ... Description: Broadcom 440 x 10/100 integrated Cont
  roll
  Physical address.... : 00-12-3F-E6-C1-E6
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... The IP address: 192.168.1.101
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DNS servers...: 68.87.69.146
  68.87.85.98
  Lease obtained...: Wednesday, April 23, 2008 06:22:23

  End of the lease...: Wednesday, May 14, 2008 02:22:23

  C:\Documents and Settings\Misty >

  now, you'll notice the wireless is on a different dns so I disabled it because I do not use home wireless. I can still connect if its active but only in safe mode.

  So in conclusion, I hope that im missing an obvious problem and that people will notice it for me until I break a toe to try this investment option.

  
  

• Satellite Pro L300 - commissioned only in safe mode

  Hay, my Satellite Pro L300 computer can be started in SafeMode only because if I start it normally it access to the desktop and then freezers.

  Can someone help with this problem?

  Hey Buddy,

  If the computer starts only in safe mode, this means that something has confused the OS

  Since when have you noticed the problem?
  No doubt it can help you to restore the system to a previous point. If it doesn t help your only option seems to be to reinstall Windows I think. Therefore, you can use the Toshiba Recovery drivers with tools disk :)

• Windows does not start successfully - only in safe mode.

  I have a 3200 HP with XP Home Edition. Windows starts only in Mode safe when I download Service Pack 3. Is there a way to fix this without doing a complete restore of the system.  I've been running without SP3 because I knew of this issue. Recently, it has been downloaded and now Windows does not start successfully.  Only in Safe Mode.   When I discovered this problem, I was able to fix it, but can't remember if it was fixed without doing a complete restore of the system and starting over.

  Required reading:

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01457284

• After you have installed SP3 (on XP with SP2), the PC does not restart in normal mode, only in safe mode

  After you install SP3, PC does not restart in normal mode, only in safe mode, without giving a clear indication of what is the problem or how to fix it - other than say to check settings in the Panel (not very useful).

  PC is a Compaq Presario desktop with AMD processor, model #: SR1720AN product #: EL540AA-ABG

  I reinstalled the operating system recovery disks, which reformats HD and installed XP with SP2.

  I then installed the SP3 from a flashdrive (361 MB files). Everything went without hiccups, but final restarts, he won't get to normal mode, safe mode only.

  I did it twice.

  Any ideas? Thank you.

  Here are the specifications of your desktop Compaq Presario SR1720AN. According to the specification, this model comes with a processor AMD and Windows XP Home Edition SP2 installed at the factory. According to your description, it seems that the HP recovery discs may have been poorly photographed for an AMD-based computer. Please see this Microsoft article and this HP document about your problem.

  To solve your problem, please reinstall Windows XP SP2 by booting from your HP recovery disks. After Windows XP SP2 is complete restored and that your computer is operational, download the "Windows XP SP3 with AMD CPU upgrade utility." Run this utility, and then restart your computer. Then download the "Windows XP Service Pack 3 Package of Network Installation" for it professionals. You can also try to use the SP3 Installer on your USB. Install the update to Windows XP SP3 and then restart when you are prompted to.

  This solve your problem?

  Please send BRAVO

• My computer is stuck in the loop "Update Configuration". Boots only in safe mode.

  My computer is stuck in the loop "Update Configuration". Boots only in safe mode. I tried to do a system restore, but an error message appears that says:

  To perform an offline system restore, you must specify which Windows installation you want to restore. For example, if the installation is in "C:\Windows:" should be restored, enter the following command: rstrui.exe/OFFLINE:C\Windows

  I typed in the "run" command, and it didn't work either. VIsta came installed on the computer, so I don't have a disc to insert and reboot with. Help, please!

  Thanks, Ben

  OK, I found how to fix this problem.

  Go to this site download and buy the repair for Vista disc. Burn it to a disc.
  This link will guide you in burning instructions
  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn
  Start your computer with the disk and follow the instructions
  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

• Why can't I access the internet without using safe mode

  Help cannot access internet without using safe mode

  Hi Dharrington25,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  As you are able to access the Internet using the safe, put your computer in a clean boot state in order to identify the program causing this problem.
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See KB Microsoft article below for more information on how to solve a problem by performing a clean boot in Windows Vista or in Windows 7:How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Unable to connect to the internet, except in safe mode

  I worked with the cable co and co wireless router and they said that I must have some settings on my computer that let me access the internet unless in safe mode.  It seemed to have happened right after that I tried to hang a new wireless router.  Once I followed the steps for the wireless router, I got a message that there is no internet connection.  I know that the modem works, because I can hard wire on my laptop and log in safe mode with network and be well.  There must be a setting that I did not find, but which must be modified to allow access to the internet the way "normal".  Anyone have any ideas?

  
  

• Yahoo Messenger opens in safe mode and not in normal mode

  August 10, my flash has crashed when I was with google chrome, then all of a sudden, yahoo Messenger is wobbly. Then thought that yahoo needed to update Messenger, so I checked and of course, there was a newer version. I downloaded and that one point until yesterday if my computer went to sleep while I was connected to yahoo messenger or if I signed up I could not sign in and the purple area remains impossible to click anywhere or even move desktop. Could not only to return with a restart of the computer.  Now it doesn't open in safe mode and not in normal mode.

  I have been in contact with the support of Yahoo messenger and they gave me things to try as Messenger clear cache via the prompt commands, uninstall and reinstallation in Mode safe mode with networking, reset of IE9, check the connection, etc... Yesterday I did all these steps and this time I saw came error window "missing windows component, flash.ocx". I went to Flash via the Control Panel, and of course, my ActiveX went awol. Then I got using IE9.  Instant yahoo Messenger WORKS FINALLY! And I got the smiley face on the login window animation, BUT I can't use it in Mode without failure.  Login window won't be developed in Normal mode.  Is there something I have to toggle to open in Normal Mode?  I have this blue and yellow shield on it. I did the thing of Mr. fixit and there he had set for a few minutes, then she came back.  In the said detailed report something hidden icon got corrupted and something to rebuild the icon cache...
  -Using Windows 7 Home Premium 64-bit

  Hello

  1 are. what fixit you referring?

  2. do you get an error message when you run Yahoo messenger in normal mode?

  Method 1:

  Right click on the Yahoo messenger and select run as administrator.

  Method 2:

  Perform a clean boot and check if you are able to launch Yahoo messenger in normal mode.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

  Method 3:

  To rebuild the icon cache, refer to this link.

  Forum FAQ:How to rebuild the icon cache

• our and twitch.tv do load properly (no content displayed) deleted the cookies/cache, nodnsprefetch, no proxy, safe mode, did not help!

  our and twitch.tv do load properly (no content displayed) deleted the cookies/cache, nodnsprefetch = true, ensured that no proxy, safe mode, did not help!
  The approximate layout works very well, but the real tv-content (contraction) or the real message (ggroups) texts will not be displayed. Also, by clicking on the wheel of preferences in ggroups will display a small empty box instead of a drop-down list filled with stuff.
  The pages all work properly in chrome.

  Note that youtube and google search normal, pages provider freemail, news pages and basically all the other pages I can think of work normally and 100%!

  I use linux 64-bit, firefox 22. However, this problem is not new, it's happened with older versions of ff too. I'm just tired of pulling up chrome every time, so I decided to report it here for a solution.

  Well, after you move a large number of files and the contents of the file autour, I found a solution:

  Delete the line
  user_pref ("dom.storage.enabled", false);
  of prefs.js solved the problem.

  Thank you.

• Windows XP safe mode does not

  The computer, I work with the University running windows xp sp2, not authentic and is infected with several viruses and to among which are Sality.AT and Hikjav! INF and Hikjav! At and some more... I had Avira installed on the computer and I uninstalled and installed NOD32 today, I tried to analyze your computer in safe mode I discovered safe mode works not at all, whenever I tried running safe mode, I was sent to the page asking if I want to start windows normally or in safe mode... I don't know if scan with NOD32 will help me and it removes all viruses and the to tho I should mention especially, he found the virus Sality.AT in partitions on my hard drive. I discovered that the computer is infected with the virus and worms, when I used my flash at home on my computer when I use MSE as protection program... I thank your help and let me know what I need to do...

  Thanks in advance...

  Kind regards

  Zeinab

  Is that you are not able to start in safe mode, and then try the other options such as N/W and safe mode with command in safe mode prompt.

  In SafeMode with command prompt when you have the command window press Ctrl + SHIFT + ESC to open the Manager tasks, then click on file-> new task-> Type EXPLORER. EXE and press the ENTER key. Close the Task Manager and you will be able to see the desktop.

  If you are still not able to start then do a system restore to restore the computer to an earlier date when the computer was working fine and then run a scan for malware removal.

  If you want to work in normal mode to remove the virus then try Microsoft online safety analysis, which manages similar definitions than MSE

  Security scanner: http://onecare.live.com/site/en-us/default.htm

  Or you can also run a scan with Kaspersky AVP tool:

  http://devbuilds.Kaspersky-Labs.com/devbuilds/AVPTool/

  Touhami

• Statrted of Vista in safe mode and systm recovery restores and no recoverydisk not found?

  Statrted of Vista in safe mode and systm recovery restores and no recoverydisk not found? Sys restore is off and will not turn on and due to safemode noting els / programs will not work. is there a way out?

  Hi Jeff,

  1. you receive messages or error codes?

  2. did you of recent changes on the system?

  If you are able to boot into safe mode without any problem, you can try to perform a clean boot and check if it helps.

  Method 1:

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  If you are always faced with the question, then you can check if you can start your computer by using the known last good Configuration feature and fix the problem.

  You can read the following article to do the same thing:

  Using the last good known Configuration

  Method 3:

  If the steps above fail, then you must have a full version of Windows Vista disk and try to perform a repair of the boot to WinRE (Windows Recovery Environment) boot from the installation disc.

  If restarting fails, then try to perform a restore of the system to WinRE (Windows Recovery Environment).

  For more information, you can consult the following article:

  What are the system recovery options in Windows Vista?

• Windows vista Theme it's not uninstall and safe mode does not work

  I try to uninstall the windows vista theme, but it is not uninstalled. A black screen is coming, and it is disappearing. I also try to uninstall the theme of windows vista by creating my new account, but it is not uninstall same problem is coming. I also try to uninstall by opening my PC in safe mode. but my safe mode does not open

  I hope you answer me as soon as possible.

  Hello

  Follow the link

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall