Equium L40 - switch wireless and F8 command does not

Similar Questions

• Satellite L40 - 16 d and WXP - WLAN does not work

  After you install windows xp on my toshiba l40 - 16 d (psl48e) wifi does not work!

  maybey upgreate BIOS solve the problem?
  the problem is this model doesyn can't hawe no support on toshiba - I do not know I can download the new bios and soft to bios upgreate

  Anyone know?

  > bios maybey upgreate solve the problem?

  Update the BIOS?
  Why the BIOS updated so the WLan has worked properly with this version of BIOS before installing Win XP again?

  I think that you have not installed the right WLan driver.

  Satellite L40 - 16 d belongs to the series of PSL48.
  The drivers are available on the page of the Toshiba UE driver:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?
  Note: You must select Archive first Optional product Type

  In addition, you can choose WLan driver: Realtek RTL8187B because the cell phone was equipped with such a WLan module.

• Problem with wireless - Vista Network and Sharing Center does not recognize my connection!

  I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.

  Hello

  Method 1:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can also view the related items for more information.
  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Method 3:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  See also:

  Connect to a network with Windows Vista wireless

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

• I use Windows 7 and my pc does not recognize my wireless Photosmart HP 5510 printer

  It will print but after not using it for awhile, when I try to print, I get the message that my computer can not find printed

  First thing I would try is restart your wireless router and if this does not work, it give a try.

  HP Print doctor for help with many printing problems

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c02073861&JumpID=ex_r4155/HHO/IPG/ccdoc/trailhead_doc&lang=en

  I hope this helps.

• As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  This may be caused by the Tab Mix Plus extension

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to install the latest Dev version of Tab Mix more if you use this extension.

  See the sticky on the forum of Tab Mix Plus:

  • http://tmp.garyr.NET/forum/viewforum.php?f=3
  • http://tmp.garyr.NET/forum/viewtopic.php?f=3 & t = 15740

• The top of page 1 1/4 inch has no answer whin you click on it. As in this page, sign in or register and other app does not work. in English

  The top of page 1 1/4 inch has no response when you click it. As in this page, sign in or register and other app does not work. in English

  This problem can be caused by that extended the Yahoo! toolbar or extension of Babylon also well down and covers the top of the browser window and therefore links and buttons in this part of the screen not clickable.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• T410 doesn't start, white screen and the keyboard does not power on.

  Hi, my laptop Lenovo T410 does not start. I hit the power button and looks like it is about to start. The thinklight flashes on as normal, the cd drive is checked, the caps lock on, then nothing/button blinks. No display and the keyboard does not respond. Power led lights up; If I leave it awhile the fan turns on. Can I stop the machine using the power button, but the problem remains the next time I turn it on.

  I tried to remove power and battery, power 10 button time then with the power to 30 seconds, before replacing the power supply and the battery but nothing happens. I tried to use a different keyboard. I tried to plug in an external monitor. No change.

  This problem appeared after I left it on overnight. I have the feeling that it entered into hybernation mode, perhaps, and that it disturbed some important functions which he could not complete. Not sure if. Any help gratefully received.

  Thank you very much

  Pete

  It's the original configuration of your laptop:

  ThinkPad T410 2522BF1
  
  i5 - 520 M (2.4 GHz), 4 GB RAM, 160 GB 7200 RPM HD, 14.1 in. LCD 1280 x 800, Intel 5700MHD, DVD, Intel 802.11agn Wireless Modem, 1 Gb Ethernet, UltraNav smart, secure, camera, 6 c Li-ion, Win7 Pro 32

  I firstly the LCD cable or secondary LED could be damaged, but if you don't see anything on an external monitor I tend to think it's a motherboard problem.

  Last thing you could try putting running a Live Distro Linux from a CD/DVD or USB drive, using Ubuntu or Linux Mint, for example.

• Unable to connect mifi 4510 hotspot for PC. Wireless see peripheral but does not connect... is to expire.

  mifi4510L

  Unable to connect mifi 4510 hotspot for PC. Meet operational requirements throughout the system. Using XP SP3. Wireless see peripheral but does not connect... is to expire. No msg error in Event Viewer.

  THX

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Try also to update the latest drivers for your device wireless using the link below.

  How to manage devices in Windows XP:

  http://support.Microsoft.com/kb/283658

  Hope this information is useful.

• Problems with my installation of Windows XP and my computer does not start on the CD.

  Hi, I need BIG help here please!... I wanted to do a fresh install of Win XP Pro, but my PC didn't boot from the XP CD... I changed the BIOS settings, the sequence start on CD, restart my PC and he kept boot from the HARD drive and the PC does not recognize that there is a CD-ROM drive. Once the start-up of the PC from the CD, I wanted to delete the partition and format the HARD drive, but it says "Setup could not format the partition...". "something like that... so what I did I have the PC from the boot CD, click in the command line and 'R' for repair, I wrote"format c:"and after that, I wrote" diskpart remove C:' so I deleted the old partition, create a new and when I wanted to install XP on it, I could not because the PC does not start from the CD... how can solve this? "

  Thank you!

  original title: HELP for the installation of Win XP.

  Hi Jorge,.

  So the only thing I can think is that it is a sort of master/slave thing.

  Your IDE HDD will be a Knight, probably alongside where the power cable is inserted, to dictate whether the player will be considered to be a master, slave, or cable select. Assuming that it is the only HARD drive in the PC, make sure it is designated "master". Then, in the BIOS, make sure that the boot order is specified as HDD0 first (as opposed to HDDx where x is greater than zero).

  In addition, assuming that the data cable is the new type of Ribbon with strands of 80, make sure that the blue connector of the IDE data cable is in the motherboard and that the end of the black connector is in the HARD disk and, if it is a two-disc data cable, do not use the gray connector.

  Tricky

• Help I got a malware virus and now I can't update and my firewall does not work I tried a lot of different things that have been posted here, and none of them have worked can someone help me please?

  I tried a system restore to an earlier date, that I went that far back that could, and it still does not.  I have had no file BITS so I followed some advice and managed to get one via a command and now it does not start.  I am trying to install what is called the hotfix for windows (using some other tips) it worked for over an hour now.  I wouldn't hold my breath that it will work for all advice would be welcome.  Thank you.

  Sweet!

• Impossible to find wireless adapter/driver installation does not work

  I recently had to open my laptop HP G7 to blow off the dust of my fan and under the keyboard. When I put they keyboard back together, my wifi does not work. I am now on an ethernet connection. Open a network connection, there is no icon wifi adapter. I tried to install the driver, but mid install, I get this message "the driver that you want to delete the files will not be deleted as the corresponding card is not installed". I don't know what that means, but when installation is finished, the Wi - Fi connection does not always appear in network connections, and the driver does not appear in Device Manager. What else can I try?

  Hi @king26 ,

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers. You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I think that after you open your laptop to clean dust from your fan and that breaks down your wireless card is no longer recognized.

  I suggest deleting and reinstalling the wireless card, as it can move during the cleaning process.

  The driver could not complete the installation because he couldn't find the map to focus on.

  Please let me know the results.

• MiFi will not work unless that plugged into the computer... Verizon no help at all it explains a vista problem... He used to work, but I think that an update did something to it and now it does not work...

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: hours on the phone with verizon... nothing is ready to throw the Verizon mifi and go to TMobile... forums looking for answers but not help there... seems a lot of people have this problem... someone at - it help him?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  A Beyschau of Annette

  Hello

  Quote: ' MiFi will not work unless plugged in to the computer.

  Where it has been plugged in before?

  If you are using to connect via Wireless, then it might be that your wireless connection has a problem.

  ----------------------------

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Internet and the sound does not work after the ATU Vista 64-bit

  I really didn't want to display in the hope I would find the answer using Google, as I did in the past, but this one i can not find the answer for.   2 days ago I d/l a program called Advanced System Care. I was told by 3 of my friends it works well to clean your junk files, Defragging ect ect.

  After d/l and the operation of the program, I had to leave and shut down the system. Today I start everything is fine, and then I noticed that I have a red X on my speakers. This is not the red X you get when cut there a smaller lower-right next to the speaker in the toolbar. When I mouse over it, it says "Service Audio work not" when I click it to repair, so good it shows all is working (volume mixer control is non-interactive) then I go to control panel and click on the speaker and I get "this computer cannot play audio because the windows audio service is not enabled.»   You want to enable "I click Yes and it brings back me just in the region, that I was when I clicked on the small speaker in the toolbar with the red x.»  Everything always looks the same as it was when I put in place.

  Is there anything else I can look?

  Second problem happened at the same time.  I have the same red x on my 2 computer screen in the toolbar on the bottom right. When I try to repair it it says this "this service cannot be started because it is disabled or because it has no enabled devices associated ' when I go to Device Manager and check to see if it is still showing my d-link wireless there is black! on a yellow background. When I try to access the computer to find local internet connections, it says that it can't find. I know that my Linksys is working because my Iphone is connected.  I already tried to install a cord between my router and my system and it still does not notice the internet even when you try to reconfigure.

  I read where I can make a dirty windows vista installation and fix it. but I really hope that there is a better way.  I also tried to restore my computer to last week when I made a back up and it seems after the use of this program, that he got rid of that as well. So now im out with to be able to roll back before I D/L this close program useless lol

  I'm using Vista ult 64 bit, that the computer is built for gaming and music. OCed Q6600 to 3.2 4gig ram 8800gt 2 in sli on a configuration card XFX mother if any other system or other questions please do not hesitate to ask.  I hope that someone has had this problem and can help me to solve it.  I don't want to reformat my HD or what I really want to pay Microsoft to talk to them on the phone

  Thanks for your help

  After 3 hours on the phone with the microsoft problem solved. Seems some how using CSA and the update of microsoft it limited my computer to start all programs at startup.

• My computer will not open certain programs, and the system does not.

  I have really no idea what's wrong with my computer, so I'll just list the symptoms.

  The first and foremost problem is that my computer won't open some programs.  First thing I noticed when I tried to open iTunes and it did not open, no matter how many times I tried.  I went to restart my computer, and that opens up a host of new questions.

  My antivirus - Windows Live OneCare - software does not open.  I tried to turn on Windows Defender for malware, but it crashes when I try to do.  Not only does iTunes opens, but neither a few other programs I have on my computer--mainly those who could help me to solve this problem, such as the restoration of the system.  When I try to uninstall a program - all - nothing happens and he refuses to let me try to uninstall anything else, insisting something is already uninstall.  And my computer can't detect my printer.

  Which leads to my other problem: I have two computers connected to a network via an Ethernet cable.  The other computer is fine and can access the Internet fine, but when he sends something to the printer, nothing happens on the end of the printer.  It is a red 'X' the symbol of my network on my computer in the lower right corner (next to), so I guess this confirms my concerns about the network.  I don't understand what exactly is the problem, just that the other computer cannot print (it is not connected directly to the printer, mine is).

  Because Windows Live OneCare and Windows Defender does not work, I can not scan to see if it is the result of spyware or malware.  And because whenever I click on the system restore, nothing happens, I can't restore the computers to something else.  I'm completely stuck.  More critical functions simply do not work.

  If you have Vista then the Windows 7 upgrade that will take and install without problems, but the editions between operating systems need to be adapted, Home Premium, Home Premium edition, or higher, you cannot switch to a lower version.

  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-AU/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  You never provided the installation diskettes, it's unusual for OEM nit of a recovery hard disk Partition.  Check any manual provided, or go to the manufacturer's Web site and see that your machine is delivered with.

  Failure one of the reasons for CD or DVD boot's Boot in the Bios options to have the hard drive initialization before any other media.  You may need to check the settings in the Bios and put them accordingly.

• Diagnostic test Exchange fails with 'Quest remote command does not work.

  I configured vFoglight and monitoring Exchange in a lab. When I run the diganostics Exchage test I get error "Quest romoting command does not work. I made sure that the agent's account "RUN as Service" applied.  Any ideas as to what may be causing this?

  Hello

  We look at your environment. Please open a case of pension.

  Sincerely