Equium M-50-216. CD/DVD burning problems

Similar Questions

• Satellite P300 19 p - CD/DVD burning problem

  Hi, I'm new to the forum and I hope somone will be able to help.

  I have DVD burning problems. When I use software engraving the image is usually copied ok and then the burning process starts, which usually lasts only a few moments, then the machine spits out the disc burnt and wasted.

  I usually use Corel DVD Copy 6, but have you tried TOSHIBA and other programs such as NERO. With the help of Corel VideoStudio, it burns discs with a success rate of 90%, but the problem comes when you try to copy my own created disks.

  I tried different types of discs (that is to say + R and - R), and I also tried burning speeds.

  Anbody else suffers from this problem?

  I have managed to find an error code 06077-26 - 2A 040902, made this average anyhting for anyone?

  TEMPRO alerts appear to have provided updates firmware for a number of other DVD players, but not for my machine? Maybe it's due a? All the drivers are up to date.

  Thanks for listening and the anybodies help is more than welcome.

  See you soon.

  In my opinion, you should not think about buying replacements. If you think that the drive does not properly contact service. If necessary the reader will be replaced free of charge.

• DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. Now, I've added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers, and a stop at 01:29:32:17 (th

  DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. I have now added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers and a cleat to 01:29:32:17 (the end of the film). The combustion is interrupted with a message to watch a C:\Users\ianle_000\Documents\20151206160446.iso file. There is no file. The message also provides a link for an explanation. This Web page is impossible to obtain. I'm running on a PC with Windows 8.1.

  Thank you once again. I burned the DVD!

  It is the first film for which I have reached the stage of burning. I'm not sure why she didn't in the first place. I tried to burn the "no menu" version, but at the time, was shot the DVD itself - I wonder when he reached this point?

  So, I burned the "no menu" version to another DVD, that worked, then the version of menu, with no cleat to a third DVD, which reads perfectly.

  Now that I have a successful routine, I'll stick to it.

  Thanks for all your help.

  I'll close this discussion now.

• CD/DVD burner problems said that it is damaged or missing? Anyone has any ideas to help me solve this problem?

  Hello, I'm trying to fix my burner but I tried to uninstall and reboot my computer to see if the problem might be to set but he told me that my driver cd is missing or damaged, and I don't know what to do besides put my computer back to factory settings. So if anyone knows something I can do like that I don't have to put it back to factory settings it would be great.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: My CD/DVD burner does not work and it is said that it is damaged or missing. How can I fix it?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DVD Burner problem

  I'm writing a DVD mastered with data. He is preparing to go, and then tells me "There was an error burning disc."  I then put in another disc and it never passes the validation errors entry screen. I bought another brand of DVD media and also a new DVD burner. I put the slow write speed as I can.

  Hello FarmBoy59,

  I suggest that you run the fixit by following the link below. This will automatically diagnose and repair problems with your CD or DVD drive when trying to read or burn media:

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  If this does not work, I suggest that you follow the steps in the link below:

  http://support.Microsoft.com/kb/314060

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• DVD burning problems

  I have a compaq presario cumputer with vista OS and it has oem cd burner - dvd - rom and the dvd software burning in it. Lately in trying to put a movie on a dvd disc it gets all the way to 99% and stops. Any type of information is even thrown the disk, what is and how do I do thanks.

  Hello bobo johnson,.

  You might want to look over the following information on DVD burning in Windows Vista.
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  There is also a KB article, that you can use to automatically fix problems burning DVDs in Vista. Click on the number to view the article.
  KB Article ID: 929461 -CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  If please reply back and let us know if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite M50 CD/DVD burning problems

  I recently puirchased a Satellite M50 with the CD/DVD Multi-lecteur. Toshiba literature indicates that it can write both write - once and several CD and DVD - writing.

  While I can burn on CD - RW and DVD - RW (DVD + RW) I can't burn discs CD - R or DVD-R (or DVD + R). The error message is something in the sense of ' does not support the driver (or reader) write once discs.

  Does anyone have any suggestions?

  Thank you

  Hello

  Well, it's not easy to say why you can t burn on some media. Maybe it s a malfunction of the media?
  Have you tried to burn CDs or DVDs from different manufacturers?
  I use TDK media and I m very happy. I found an interesting article on the CD/DVD burning.
  Check this: http://www.pcworld.idg.com.au/index.php/id;1400178792;fp;4;fpid;192

  Good bye

• Tecra S2: DVD burn problem

  Hi all,
  We are 4 and we have about the same problem when you try to write a DVD with ours, laptops, with nero6 the error message is usually "there was a problem powe offers" or "invalid destination path" (I try to translate it from Italian error code). In any case, on all our laptop Tecra S2, it is quite impossible to write one DVD correctly. DVD TEAC DV-W28E material, the driver being used is by Microsoft

  Thank you all

  Hello

  First of all, it would be very interesting to know if you are using the Toshiba recovery image.
  Second, have you used different DVD and have you checked if this error message appears with other burning programs?

  I checked the page of the Toshiba driver and found an update of firmware for Tecra S2.
  In addition, there is also a DVD ram driver.
  I suggest you to install these applications.

• Satellite C850D - DVD burning problem

  Four months ago, I bought a laptop C850D - 12 L to replace my laptop computer another death.

  A couple of days, I tried to burn on a DVD jpg files; I had not done this before on the new machine.
  Everything seems fine until she reach the finishing process and the disk does not end.

  I tried to fire using Windows own engraving option, Nero and I even downloaded Ashampoo Burning Studio, but whenever I get the same results, i.e. nothing gets burned on a disc. I wasted 12 discs already try all variants of files, engraving, programs, etc., but each of them fails.

  I don't think it's the drive, I think it's a software problem, because * I am able to burn files to a CD *. The player plays also bought the DVD shop so that the part of okay - it's just finish burned DVD that is the problem.

  I downloaded a few programs that may have affected things, (Nero was already on the laptop when I bought it), they are: VLC player and DVD Styler - I downloaded them only that Windows 8 has no creation of DVD as Windows 7 programs don't.

  I phoned John Lewis, where I bought the PC, but they were not able to help, nor were Toshiba, who said it must be a software problem and asked me if I would like to speak to someone else for advice, even if it would cost me. seeing that I have a two year warranty on it, I refused.

  Drivers from the DVD were dated 2006 and a search inside the Device Manager said that these are the latest drivers.

  I went to the website of Toshiba and found a zip file driver, which has been updated in 2013. I downloaded which, to reveal the ten files, three of which are uncompressed application files. I tried to run all three of the latter with no apparent effect. I even tried to search these files when you try to update DVD drivers in Device Manager, but he acknowledged not all ten driver files (mentioned above), even though I copied these to a more convenient location in My Documents folder.

  I would be grateful for any suggestions as to how I can solve this problem.

  Best regards, Martin.

  > I don't think it's the drive, I think it's a software problem, because I am able to burn files to a CD.

  I think you use not entirely compatible DVD disks.
  It was my problem burning DVD disc.

  Recommend test you the discs DVD-R from different manufacturers but I had the best experience using R TDK and Verbatim DVD R

  PS: Windows system using common Microsoft CD/DVD driver. This is why there is no special driver for optical disc player sound is always part of the system.

• Satellite P300-h-13 - DVD burning problem

  Hello foks,.

  First of all, I'm from Holland and my English is not so good, sorry about that.

  I had my problem posted on http://laptopforums.toshiba.com/t5/General-Technology/bd-p/brd_gen and they lead me to him. So I hope that someone here has a solution to train me.
  The form of answers it will not work.

  The form of DVD playback going perfect, but burning no longer works after the first time I burned a DVD with success.

  Hmm seems strange
  Have you tried to delete upper and lower filters in the registry?
  If this is not the case, to do this:
  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the computer and check if you can write to DVD

• Satellite M55 - S139 DVD burn problem

  I tried 9 times to burn a DVD.
  I tried several software programs including InterVideo WinDVD came with the laptop, DVDFab Decrypter and those that I use most of the time, DVDShrink and ImgBurn.

  The log of the software indicates success, but most of the DVD will not play back - even on my laptop. Most of them won't open even - it just keeps telling me to insert a disk in the drive.

  Only once, I successfully burned a part of a DVD with InterVideo, and I could play on my external DVD player. But I was not able to duplicate my success (and only partially burned - perhaps InterVideo's just a demo). I tried to save as an ISO image and also just the files.

  I'm using Memorex DVD-R. Can someone help me please! I tried the DVD forums and nobody knows the answer. Is this a hardware problem?

  Here is the log of my last attempt:
  I 18:36:38 ImgBurn Version 1.2.0.0 started!
  I 18:36:38 Microsoft Windows XP Home Edition (5.1, Build 2600: Service Pack 2)
  I 18:36:38 initializing SPTI...
  I 18:36:38 looking for SCSI / ATAPI devices...
  I 18:36:57 found 1 DVD ± RW/RAM!
  I 18:37:33 operation started!
  I 18:37:33 Source file: C:\DVD. ISO
  I 18:37:33 file Source sectors: 1 760 786 (MODE1/2048)
  I 18:37:33 Source file size: 3,606,089,728 bytes
  I 18:37:33 Source file application identifier: DVD Shrink
  I 18:37:33 device destination: [1:0:0] MAST * a DVD-RAM UJ - 841 S 1.50 (D (ATA)
  I 18:37:33 Destination Media Type: DVD-R (disc ID: RITEKF1) (speeds: 1 x, 2 x)
  I 18:37:33 Destination media sectors: 2 297 888
  I 18:37:33 write Mode: DVD
  I 18:37:33 write Type: DAO
  I 18:37:33 write speed: MAX
  I have a link 18:37:33 size: Auto
  I 18:37:33 Test Mode: Yes
  I 18:37:33 BURN-Proof: enabled
  I 18:37:36 filling buffer...
  I 18:37:37 writing LeadIn...
  I 18:37:40 writing Image...
  I 18:59:19 Cache synchronization...
  I 18:59:25 cycling tray after Test write...
  I 18:59:29 operation successfully completed! -Duration: 00:21:55
  I 18:59:29 average write speed: 2 713 KB/s (2.0 x)-Maximum write rate: 2 800 KB/s (2.0 x)

  Hello

  This Protocol of engraving says nothing.
  These problems usually occur because of the CD/DVD media.
  I put t know if you tried, but you should check out the various media CD and DVD from different manufacturers.
  Well, try to use Nero burning Rom program.
  It s a great program and I m very happy

• Dell Latitude D610 dvd burner problems

  Help! I have a computer dell laptop latitude d610. It came with dvd - rom. I bought a dvd on ebay writer who was supposed to be plug-and-play. It plays CDs and DVDs, but when I burn a cd or dvd, it burns fine and they will play in other PC, but will not play in the drive that makes them. There is no sense to me at all. I noticed that after the cd is written he opens the drawer and says to close but then it didn't anythingafter that. It is just a flag in the sequence of burning software saying unable to act. Ive tried different burning programs too. same result.     I have the latest drivers. Any help would be appreciated.

  Hello

  ·         What is the brand and model of the external DVD drive?

  ·         Burning software how do you use?

  ·         Did you try to connect the device on another computer and check if you are facing a similar question?

  I suggest you to uninstall all software burner and install a burner software and check if it works.

  Follow the form of measures troubleshooting article and check if that helps.

  How to troubleshoot problems that occur when you play a DVD in Windows XP

  http://support.Microsoft.com/kb/308012

• Vista Media Center - DVD burning problems

  my media library began to say that error when you try to burn a dvd of a tv show, that I taped. The program is a unrestricted type and I've been able to burn these programs on dvd. My windows updates are up to date. I'd appreciate any help

  Hi David,

  Thank you for using Microsoft answers.

  I will need some additional information to help you best.

  O what is the exact error message you get?

  Ø do you have any third-party burning software installed on your computer?

  O are able to read these files in Windows media center?

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Let us try to disable antivirus and check if it works.

  Reactivate the antivirus after checking the issue.
   
  Let us try to disable the third-party firewall and check if it works.
  Re-enable the firewall after checking the issue.

  Method 2:

  Uninstall the third-party software if any burning and see if the problem is resolved.

  Method 3:

  You can try to restore your computer to a previous state and see if the problem is resolved.

  Follow the instructions below to restore your computer to a previous state.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  2. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  3. In the System Restore dialog box, click Next.
  4. In the list of restore points, click a restore point created at least a week before the current date, and then click Next.

     Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.

  5. Click Finish.
  6. The computer restarts. The system files and settings are returned to the State they were when the restore point was created.

  Method 4:

  Try to install the update from the link below.

  June 2008 Cumulative Update for Media Center for Windows Vista

  http://support.Microsoft.com/kb/950126

  Check whether the problem is resolved.

  Method 5:

  See the following topic in the link below.

  What is protection against copying and how does this affect me?

  This management recorded TV in Windows Media Center: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Managing-recorded-TV-shows-in-Windows-Media-Center-frequently-asked-questions

  See the link below for more information on burning CD/DVD with media center.

  Burn a CD or DVD in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• DVD burning problem

  Hi everyone, recently I had a problem when burning dvd with original writer of windows (windows 7)
  the 1st dvd fail to burn, the 2nd burn very well
  This is the case for almost a week, I lost half my DVDs, and I really want to stop
  I tried a lot of solutions suggested here, but the works of nothings
  now in order to burn a dvd, I have to wait for the first dvd to fail, so I can be able to burn DVDs.
  NB: I'm burning the same files, fails the first time, the second to succeed.
  Help, please

  Glad to hear it... hope it will continue to behave! Although you have the RW discs available now...

  Regarding the registry cleaner, you want to read the thread below... really everything you use is accessible disk cleanup tool by clicking on "BONES" - "Properties".

  Cordially - Ric.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/what-is-the-best-registry-cleaner-for-win-7/9f79ae13-C069-E011-8dfc-68b599b31bf5

• DVD BURNING PROBLEM! NEED HELP!

  I'm burning my newly downloaded Windows 8 on a DVD. The problem is, I don't know what kind of DVD to burn. DVD-R, DVD + R or DVD - RW! Help, please! If you know ANY information on this subject, it would be VERY useful.

  You can use any blank DVD to burn Windows 8 on. You will be able to install it using three types.

  DVD-R or DVD + R would be the two best options.