Equium M40x - wireless not connect not

Similar Questions

• Equium M40X - can not open IE7 or emailed

  I use WXP home SP3 and the latest Atheros AR5005GS Wireless Network Adapter on my Equium M40X and have no problem with the creation of wireless
  connections.

  But when I connected to my Wi - Fi and try to open IE7 or sent emails from my office 2007 outlook the * 'Connect To' * window, but only as my dial-up connections will appear I can't open my IE7 etc, but I can connect to my firefox browser as it not by default
  I have to use my dial-up & wifi can someone help me solve as to why I am having this problem.

  Hello!

  It's strange, but you have installed all updates for your Windows?

  Maybe you need to reinstall the laptop with the Toshiba Recovery disk or you have a virus or something else on your computer. Update your antivirus program and leave virus scanner.

  Good bye

• Equium M40X does not work properly after upgrading the BIOS

  OK, well... I'm not a computer scientist, but I have a bit of trouble on my hands and I don't know where to go for the right help, so I came here.

  Today I started my lappy to confront an illuminous Green Office... not all it is green just of great spots here and there. Happened to me before, but it disappears after about 15 minutes, but today his guarded it usually hours and is still as he.

  I looked everywhere on the net for a possible fix but nothing helped, even though I've heard somewhere that an update of the BIOS might do the trick, so natually, I did... I came here and searched for my Equium M40X, found, downloaded and installed the latest version...

  but now I have a screen with a resolution of half of what it should be, it went from 1200 x 800 or something like that... to 1024 x 786 and I always get the green screen problem... the program toshiba provided for the update of the BIOS does a backup file (BIOS. (BAK)...

  I can't restore the old BIOS would set the screen resolution, but I'm just helpless as to how I go about it. I find the file, but I have no way to open/run it

  I've had this laptop for about 2 years now, I know probably just getting old and a bit tempermental, but if theres no way you people out there can help, I would much apreciate it :)

  Thanks a bunch - Ash

  Hello

  I Don t think the biosupdate is the reason for the reduced screen. It does not sound like a software thing, but rather a hardware malfunction.

  Is your normal screen during startup? If so, I'd say just remove your existing display drivers and install the new. But if it s like you described then it must be a hardware problem and the machine should be checked by a technician or at least a service partner.

  Would be better if your bring your machine to an ASP for a checkup of material.
  If you need assistance to find the ASP closest, try this link (the ASP index):

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome and good luck

• Equium M40x does not work with connected AC

  Hi all

  I have a laptop Toshiba Satellite M40x-189, there little about 2 years and recently I have problems with it.

  The laptop when it is connected to the Board, the green light appears, but after 5 seconds it laptop turn off. the looks of dead battery, because it does not load normally, I keep connect and disconnect the AC, so that the orange light appear sometimes, sometimes for 5 seconds only. It's frustrating. When the drums come to start getting free he takes forever to be full. just at the moment where there is a load on the battery, that I can work on the laptop, even with the connected AC, but instead to use the AC laptop running on the battery, which usually lasts less than an hour, and then it's the bit of history.

  All I need is just to work with connected AC, because I normally just use the AC.
  Well I don't know what the problem is, can someone help me please

  Hello

  For me, it looks like a problem with the electronic power supply on the motherboard.
  I don t think that there is an adapter of wit AC problem itself or with the bad connection between the power supply and the Commission.
  If the AC adapter would malfunction the battery would not charge. But charges of battery, it collects a very slowly but it charges

  Finally I n t think you can do something you go to the service of your country. In such cases you re on the right side

• Equium M40X does not supply power to the top!

  The battery is U/S then removed. Power supply AC is applied, the fan works OK but nothing happens when you press the power button / stop the fan still works but machine does not start.
  If the laptop is left untouched for 2-3 weeks and applied power supply and power button / Stop button, it will then start to BACK but then starts hangs in the BACK!
  After shutdown, it will fuel not again unless leave for an extended period?
  This hitch has got me beat... has anyone out there had this problem before, and if so, how was it healed?

  Sounds really serious, I guess that the motherboard could be defective. Is someone did spilt coke on your machine? It would be interesting... :)

  I suggest you to send your machine to an authorized partner of toshiba, since your machine has a serious hardware problem. Before sending the machine to an ASP, you can try to exchange the RAM. Maybe with a different RAM, the machine * could * works properly but it s not guaranteed...

  Otherwise, if even a RAM doesn´t Microsoft exchange help, visit the link below and contact a service center in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome them

• Equium M40X: Cannot print - not done. Print Spooler service does not

  My notebook Equium M40X has suddenly decided to stop from allowing me to print, gives me the message "operation was not completed. "print spooler service does not. I get this message even when you try to install the original installed printer drivers.

  To resolve this problem, I went to the services.msc to attempt to start the print spooler, but the command is not here present and seems to be missing. I also tried to launch it by clicking Start and then run and typing "net start spooler", but even once, it does not. Can anyone help with this?

  My laptop is an Equium M40X and the operating system is Windows XP Service Pack 2.

  Hello

  This error occurs because the spooler service has not been started or has stopped working.
  It seems that this error is known to Microsoft and they decided to public an article in the knowledge base that could help solve this problem.

  http://support.Microsoft.com/kb/314876

  As you say that the spooler service must be restarted.
  To start the spooler service, follow these steps:
  1. click on start and then click Control Panel.
  2. double-click Administrative Tools and then click Services.
  3. double-click on the Printer Spooler service and then change the startup type to automatic. This option sets the spooler service starts automatically when you restart the computer.
  4. If you want to start the spooler service immediately, click the Start button under the Service status field

  If you will not be able to restart the spooler service, you can try to restore the Windows operating system to the point initially by using the Windows System Restore tool.

• Equium M40X keyboard does not work properly

  I Equium M40X, but the keyboard does not work.
  I can not type anything with the keyboard. I reinstalled windows using the recovery CD but stil doesn't work.
  Please help me solve this problem.

  Sorry, but I think that the keyboard is dead and must be replaced. If you can get a new one let us know. Maybe someone can help you and explain how to share one keyboard.

  Good bye

• Equium M40X: I get to the banner of Toshiba, but Windows does not start

  When I start my 2 year old Toshiba Satellite M40X, I get to the banner of Toshiba, but Windows does not start. I tried using the recovery CD and it does not either.

  Any suggestions as to what could be the problem?

  Hello

  What do you mean with the banner of Toshiba? Did you mean the Toshiba splash screen that appears at the begging of the boot?

  Equium M40X successfully passed this screen?

  If the laptop is unable to switch to the home Toshiba screen then I presume that the BIOS has detected a hardware problem.
  In this case primarily the motherboard fails

  But if the laptop is able to spend the Toshiba start screen, the motherboard must be ok and only a 3rd device malfunction as HARD drive could cause this problem.

  Try to study a little

• My HP Pavilion Entertainment PC will not communicate with my printer HP 309g. Suffice to say that they are connected to WIFI. I have tried wireless and connected.

  My HP Pavilion Entertainment PC will not communicate with my printer HP 309g.  Suffice to say that they are connected to WIFI.  I have tried wireless and connected.

  GR

  Since they are both HP products you the best solution is to talk to them...

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Wireless network connection does not

  I can't access a wireless connection with my computer wireless network connection. The icon in the bottom right of the screen shows a red X and says 'not connected wireless network connection. The wireless on my keyboard button does not illuminate

  I tried to change the channel on the new ADSL2 wireless router and refreshed looking for wireless connections, but still not found connections. I have not used a wireless router before and never used a wireless connection with this computer so I don't know if the wireless card works or not, if the properties of the wireless adapter indicate that it works. Is there a way to check if the computer's wireless card is running or connected and if not, how can it be connected? Thank you

  I finally understood by trial and error, why I was unable to connect wireless to a modem, that you sent me. In my control panel, I found that the properties of HP Wireless Assistant had "Hide status icon" checked, so I checked it and the icon came in the bottom right of my screen. I left then clicked that icon and it showed the wireless and bluetooth was OFF so I went in and it now works.

  Why HP support could not help me in what I don't know, I just got the race!

  Hope this helps others with similar problems.

• NO wireless network connection - message "Windows could not find a certificate to connect to the network Shaida. How to fix this problem?

  I had just restored my Thinkpad T60 the default setting. Reformatted and reinstalled Windows XP, but I am unable to connect to the wireless network connection - message "Windows could not find a certificate to connect to the network Shaida.

  Shaida is my wireless modem.

  How to fix this problem?

  Before the resumption of connection Internet worked normally.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/870702

  It will be useful.

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• The 'Wireless Network Connection 3' network card is not properly configured to use the IP protocol

  I can't connect to any internet. I'm trying to connect to wireless hotspots, but it tells me that I am connected with limited access

  Hi idkmyname

   

  1. What is the exact error message displayed when you try to go online?
  2. do you have updated the network card drivers installed?
  3. What is the brand and model of the computer?

   

  Method 1:
  You can check the links below and check out them if the steps to help you resolve the issue-
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  You can also check the help links below-
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Method 2:
  You can follow the steps below to check the NIC in Device Manager. I suggest you to uninstall and reinstall the NIC drivers and check:

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  Check if you have any exclamation point beside the devices listed. If you have, then there is problem with the card is installed.

  c. in the NIC, expand adapter, right click on the devices listed and then click Uninstall.
  When you are prompted to confirm that you want to remove the device, click OK.

  d. restart the computer.

  After the computer restarts, the drivers will be installed automatically. Check after this procedure if you are able to get access to the network.

   

  If you get all the drivers related errors, you can check if you have the latest drivers updated, installed for the network card. See the help link - below
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  I hope this helps.

• "Wireless network connection is not a valid ip configuration" Windows 7

  I recently uninstalled McAfee antivirus on my aspire one NET accountant running Windows 7. Since then, I can't connect to the internet, I get a "wireless network connection has a valid ip configuration" of all other pc to connect to my router wireless without any problem.

  Any advice or help?

  Firstly, to check that the files are not corrupted, run the following analysis.

  Start > type CMD

  Right click on CMD and select run as administrator

  Type sfc/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  The scan will take a few moments

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

  Once the process is complete, you may receive one of the following messages:

  • Windows resource protection did not find any breach of integrity.

    This means that you have not all missing or damaged system files.

  • Windows resource protection could not perform the requested operation.

    To resolve this issue, perform the analysis in safe mode System File Checker

    (http://windows.microsoft.com/en-in/windows/start-computer-safe-mode)

    and make sure that the files PendingDeletes and PendingRenames exist under %WinDir% \WinSxS\Temp.

  • Windows resource protection finds files corrupted and managed to fix it. Details are provided in convertible bonds. Newspaper %WinDir% \Logs\CBS\CBS.log.

    To display detailed information on the analysis of system files and restore, go to the display of the details of the System File Checker process.

  • Windows resource protection found corrupt files but was unable to fix some of them. Details are provided in convertible bonds. Newspaper %WinDir% \Logs\CBS\CBS.log.

    To repair the corrupted files manually, see the details of the System File Checker process to find the damaged file, and then manually replace the corrupted file with a good copy of the file.

  Second, have you tried to download the drivers and save them to your desktop?

  Close all window and/or applications

  Right-click on the file and select run as administrator

  Or, restart and start typing the F8 key

  Select Mode safe mode with networking

  Again, right-click on the drivers that you saved on the desktop and select run as administrator

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-driver-problems#tips-fixing-common-driver-problems=Windows-Vista

  Troubleshooter

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems

• Receive the message error "wireless network connection is not a valid ip configuration.

  Original title: unable to connect to wifi on windows 7 on Dell laptop

  Help!  I went on vacation and used my laptop to DVD play only.  I am now back home and cannot connect to the Internet.  I tried all sorts of resolutions without result.  When I use the Troubleshoot utility, it tells me to stop my router and turn it back on.  I've done this multilpe times at this point.  Once I keep in the resolution of the problems, I get the same message again and again: "wireless network connection is not a valid ip configuration.  I disabled McAfee and morning services.  I used the command prompt to reset WINSOCK, IPv4 and 6.  I turned power on and off wireless by using the key on the keyboard.  I disabled and enabled the network connection.  I have the driver-upated.  I know the router works properly from my iphone and iPad is all connected without problem.  I removed and added to the wireless network.  In the network and sharing Center (I would copy and paste the view up here, if I could, but since I can't get online...), it is said "unidentified network, no internet access" on the right side, and he also says that I'm connected to a public network.  There is no link to click for the public network and I can't seem to find a way to change it to the House (there are no options, no links).  I tried to solve this problem, after I get home from work every night and I'm so frustrated that nothing works.  Please, please help!

  Kristine,

  Please try these steps before replacing the adapters and let us know the results.

  1. To open a command prompt, click Start , and then type CMD in the programs and files.
  2. Right click on CMD.exe in the programs icon and select run as administrator.
  3. When the user account control pop up box, click Yes.
  4. At the command prompt, copy and paste (or type) the following command and then press ENTER:
     netsh int ip reset c:\resetlog.txt

     Note If you do not specify a path of the directory for the log file, use the following command:

     netsh int ip reset resetlog.txt
  5. Restart the computer.

  If the problem persists, go through the given suggestion't-have-valid-ip/62ca59b1-c173-4465-9153-554a13928315 http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/wireless-network-connection-doesn

  Hope that these measures could help you.