Equium M50-192 does not start

Similar Questions

• Equium M50-192 will not start - HARD drive problem?

  Hello

  can someone help me please
  I had a Toshiba laptop. I had for about 3 years, every time I turn it on it gets to the Toshiba logo, but won t charge up.

  So I tried to put the recovery disk in and boot from the disk or try to restore but it won t anything off the drive, it gets the full recovery of the hard drive, but when I select the option to do this, it just says: for a drive partition error checking please try again?

  My hard drive is not partitioned. It also makes a funny clicking on in the touch mouse pad is one then after a while a beep. I left it and woke up and it was like that

  Sorry I'm not very good with computers of m.
  If any 1 got any idea please help

  Just noticed in my bios it says hard disk = none?

  Hello!

  What Satellite laptop do you have?

  I think that your HARD drive is defective, but you can check with the Drive Fitness Test.
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  Download the image, burn it to a disk and boot from it.

  Good bye

• Equium M50-244 does not not to wake up on LAN

  A notebook Equium M50-244 does not meet the magic packet WOL.

  The BIOS settings are correct and show adapter LAN ENABLED, Wake on LAN: ENABLED.

  The sticker on the laptop and the original box gives a different MAC address to know what the device itself (ifconfig or lshw). No matter, the laptop does not account the magic packets for two MAC addresses.

  Using Wireshark, I see that the WOL packets are certainly diffuse with properly formatted MAC addresses.

  My thought is now that it is a BIOS problem but I can't find the right bios for this machine.

  What would be the best bios match? Keep in mind this box is Linux.

  Thanks in advance for any help.

  See you soon

  Nick

  Hello

  Have you checked if the WOL is enabled in the network card settings?
  Do you know how to check this?

  Go to the Device Manager, expand network adapter s and mark LAN card.
  Then, go to the properties of the network adapter and check the Advanced tab.

  There are a lot of different settings and a configuration option must refer to the WOL.

• Equium A100-338 does not start the OS Vista - update Bios?

  Hi guys,.

  My laptop (a few months) decided to die and was told by tech support that it might be because of the BIOS. The problem is that the computer does not start the operating system (Vista) and the update of the BIOS available only is the version of windows. Are there any other mirror to get the traditional update or even a way to convert a the update the BIOS from Windows startup disk?

  Thank you

  Hello

  If you can see that one version of BIOS on Toshiba page then only one version exists and is available!

  > The problem is that the computer does not start the Vista operating system
  I don t think that BIOS could be responsible for this problem.

  You must first provide more info on this problem!
  The laptop goes to home Toshiba screen? Have you tried to recover the laptop with the Toshiba Recovery CD?

  Please provide details!

• Recommended memory for Equium M50-164 does not fit

  I have the Equium M50-164 in its original configuration.

  I wanted to add more memory, so, on the recommendation of the Toshiba Product Support page, I bought the Toshiba PA3411S-2M1G memory (from eBuyer) module.

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/individualOptions.do?service=UK&OPTION_ID=118626&t oshibaShop = true & SelCategorie = 4700

  Trying to mount the module of memory in my machine, I found that it is not! 'Separator' plastic between the two contacts on the laptop computer does not match the position of the notch between the two sets of pins on the memory module.

  Tosh recommends part number: PA3411S - 2M1G 1024 MB (1 GB) memory PC2-4300 (533 MHz) DDR2

  The memory that's happened has PA3411S-2M1G 1024 MB (1 GB) PC2-4200 (533 MHz) DDR2 memory on the box.

  Someone in the forums said that PC2700 PA3313U-2M1G is the part number.

  The manual supplied with the M50 means memory PC2700 .

  Anyone know the number, or an alternative appropriate by another manufacturer?

  I am very annoyed, as hotline support suggested, I phone their sales department! So they can sell me more wrong memory strips? Now look forward how the glove of returns with eBuyer...

  See you soon,.

  Andy

  Try here... http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=20384&ft=m&st=3

• Equium M50-164 does not work after the spill of water

  I bought a laptop Toshiba Equium M50-164 last year.
  I paid a lot of money, now it does not work.
  I can't afford to write that he took so therefore must operate.

  The reason why it does not work is the water spilled on it.

  I took it to a specialist. I found in the repertoire of Thompson, I paid him £50 and he siad he probably one
  new motherboard and so not worth repairing as it comes to Toshiba and their parts are expensive etc...
  Is this fair?

  I'm desperate to fix but don't know how.

  Help, please. Without doubt, I should be able to buy a motherboard for the laptop without costing an arm or a leg.

  Hello

  As you probably know that the laptop parts are not cheap because of miniaturization and mobility.
  The LCD screen and the motherboard are the more expensive parts that are used in the laptop. I na? not know if Toshiba parts are more expensive. I guess it depends on the features of the laptop.

  However, the new motherboard is very expensive and I think that the search for unity of second hand with the motherboard isn't a bad idea.
  CA? s your choice. New motherboard = expensive but with card guarantee or second hand mother = cheaper, but no guarantee

  PS: the replacement of the motherboard is not very easy and that's why if you have no experience you should ask a technician for help.

• Equium M50-164 does not connect to internet

  I bought this laptop 3 months ago, and the wireless internet worked well. Now all of a sudden, it does not connect to wireless internet, so that the pc downstairs. It will not connect also if I connect to the router directly, or even through your phone line ADSL modem.

  Any ideas on how to solve this problem?

  Hello

  Please check device manager if the card network and wireless card are recognized correctly.
  You have installed any 3rd software or have you changed something? Did you get any error messages? Please post more information.

  Good bye

• Equium M50-192 doesn't start after upgrade memory

  Hello

  at the moment I have 2 x 512 MB sticks of memory in my laptop, I bought 2 x 1 GB sticks of mrmemory.co.uk as an upgrade. When I tried to use the computer will not start until I put the original RAM support. State Mrmemory that they sent me the correct memory for my laptop, I have done no matter what wrong?

  Thank you
  Andy.

  Hello

  I think that the modules of memory are not fully compatible or defective
  It's the only plausible explanation why start Notepad doesn t
  As far as I know the laptop can be upgraded up to 2 GB of RAM (2 x 1 GB) and this module should be compatible DDR2-400 and 533 Mhz 1 GB (PA3411U-1M1G)

  PS: Have you tried to update the BIOS by using the old memory modules?
  Check if you are using the latest version of the BIOS if it is up-to-date and check if the new modules would

• Equium P300-19O does not start

  Hi all

  I have an Equium P300-19O, which I have had the problem. Now the pc doesn't even start not at all. When I turn it on, there is not even a power light and it doesn't do anything.
  Could someone of you please advice me to solve this problem and resuscitate Equium P300-19O?

  Best regards

  Taro

  > Could someone of you please advice me to solve this problem and resuscitate Equium P300-19O?
  You must understand the hat on this virtual path that nobody of can say for sure what is wrong there and we can only speculate on the potential problem.
  Who knows what's wrong there. Maybe there is a problem with electronic control gear.

  Unplug the power plug, remove the battery and leave it for a while. Try to start the laptop with AC power only.
  When you connect the AC power supply is LED on indicator system turned on?
  Is there a reaction when you press the power button / stop?

• Equium P300-190 does not start after battery

  Hi all

  The battery died on my laptop, Toshiba Equium P300-190 and power off.
  I have pluged in the output, but it won't start. The light is not yet on the front of the PC.

  Please shed some light on this problem on the issue that can be resolved.

  Thanks in advance

  Concerning
  Taro

  Hello

  Try this:
  Remove the battery and unplug the notebook sector.
  It takes a few hours (in my case, I left the laptop throughout the night disconnect battery and network.)
  Then reconnect the two parts and check if the laptop lights

  If it s hardware problem without gravity, then the laptop must turn on, otherwise you will need professional help

• Equium A200-1VO does not start and makes weird noises

  My Toshiba Equium A200-1VO don't load on Windows entirely, which means I can't use it. When you turn everything goes well until the Welcome screen in Windows Vista. From there, it starts to get weird creaking and it beeps from time to time. It won't start here and these sounds do not stop.

  Help please

  Hello

  Is it possible to know where the noise comes from?
  As suggested by above user, it could be a HARD disk, but in this case, it would mean that HARD drive failures and he could die in the next time

  You said it s begin properly until appears the window Vista would be
  So maybe it s only a problem of software but I m still don t know what part of the software would create such sound however, I think that if would not be bad to reinstall the operating system in order to check the notebook with factory settings.

  If this strange question would persist or if you would not be able to reinstall the operating system using the recovery disc then a hardware problem could cause this strange things and I think it means that you will need to contact the ASP in your country for a material test

• Ieee 1394 host controller Texas Equium A60-692 does not start

  Hello!

  I have a Toshiba Equium A60-692 about 2 years old. On rare occasions the above will install and also the network/ethernet card etc with it when it starts. But 99% of the time it fails to start upward.

  Tech from Toshiba tell me it's the CMOS battery, but time slept OK for the last week so maybe it could be something else. Other strange things are can only recognize the drive HARD to start from what IDE Standard is chosen in the BIOS options (Enhanced IDE option and I think only used normal overall, ups causes boot errors). Also a green screen with weird graphics on occasion. Also the speed of the processor can be reduced, as shown in the properties of my computer.

  Any ideas from anyone as worried of wasting time to unsolder the battery if this isn't the problem. Could this be a fault of the motherboard that is irreparable? I am a relative novice if need help someone here. This made me!

  Hello

  I think you might be right. Eventually he s a small part on the motherboard that could malfunction.
  If I m not mistaken the controller IEEE 1394 Texas Instruments could be the Firewire port and it s part of the mobo

  Welcome them

• Equium A60-173 does not start after the BIOS update

  Hello people,

  I downloaded a BIOS updated toshiba for my Equium A60 - 173 and while it was loading on, restarted my laptop. Now, whenever I turn it on, the power light comes on for a few seconds, there is nothing on the screen and then it turns off again. I'm really worried, I've done some serious damage. I know a bit of the BIOS, but not that much. I need help, this is how I put a BIOS on here if I can't turn it on and the current one is damaged. Is it possible to get the loaded BIOS on without being able to turn it on?

  Any help will be greatly appreciated! Thanks in advance.

  Concerning
  James

  You could try to remove the battery, wait 2 minutes and then go back, however he only its not very likely that your BIOS update was not successful. If I remember correctly when I flashed my A60-181 this process takes about 10 minutes. If your laptop prematurely reloaded until the program has finished, I'm afraid you have no choice but to send new to Toshiba to be fixed.

  Richard S.

• Equium L100 186 does not start!

  My satellite L100-186 (just over a year) won't start.
  When I turn on the power in green lights, the battery indicator lights up green dvd blinks several times, the unit will stop and then all lights go out.

  The same phenomenon occurs without the battery mounted (except no battery light)
  Help!

  Looks like a hardware problem (maybe the motherboard) and only the technician of the ASP, therefore, may be a serious option.
  That's why guys ASP-contact and ask for help

• Satellite M50 182 does not start

  Hello

  I have a Satellite M50-182.
  Since a few days I m faced a strange problem on my laptop.

  When I press the power button, it turns to blue light, as usual, I hear the fan for 2 seconds and after that the system stops immediately (I put t get any screen) and turns off.

  First I thought it might be a contact isolate but the same thing happens in battery mode. After several tests the system is in place, but it can take up to 5 minutes by pressing the power button.

  Y at - it an idea, that can cause this problem?
  Kind regards
  Philippe

  Hello!

  Try to remove the battery and unplug the AC adapter.
  Wait at least 30-40 minutes.
  Then connect the battery or the AC/DC adapter and try again.

  Otherwise, I'd go to a local ASP. I think that there is something wrong with the hardware (I think that CPU or the motherboard).

  Good bye