Equium M50-216 freezes in Windows installation

Hello

I have the laptop next Equium M50-216 (PSM57E). Im trying to get to Windows XP Pro. When I boot on the CD it goes into the Windows Setup screen and all of a sudden freezes at the "Setup starts Windows. I don't get any CD or HARD drive activity. I have hold switch on stop and restart.

Any help/advice would be appriecated.

Thank you very much in advance.

Hello

It is very unusual, but before starting the procedure of facilities please make sure that all external devices are disconnected.

Do you use legal copy?

Tags: Toshiba

Similar Questions

  • I need help to find the drivers of Windows XP Home for my Equium M50-216

    Hello

    I did a full install of windows xp professional on top of windows xp home and now I am missing some drivers who im hard to get the drivers that I need are for the Toshiba Equium M50-216

    mass storage controller
    network controller
    Ethernet controller
    video controller
    video controller (vga compatible)

    I'd be really great guy if you could tell me exactly what im of drivers who need to choose :))

    Drivers Windows XP Home edition, you can find on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
    On this page under product Type, choose the option ARCHIVE and then your laptop model.

    I checked and are there drivers for Windows XP Home edition. Please download the installation instructions document too and install all the stuff after this installation order. It is very important to install the drivers, tools and utilities in the correct installation order.

  • Equium M50-216: cannot save or use the microphone or "phone entries

    I have an Equium M50-216, with 1 GB of RAM & Centrino 1.7 GHz processor, running XP Home.

    Without apparent reason, I am suddenly unable to use my SKYPE USB ' phone to talk. Audio output is perfect, however.

    I also tried my helmet using the jack on the front of the laptop, with the same result.

    I downloaded and installed the latest driver for the sound card, which is a Realtek AC97. I tried the test equipment of Windows, but there is no evidence of entry he built in sound recorder, audio, or in windows.
    The device driver is properly enabled and reported no problems.

    Is it a hardware problem - as it seems card works OK for output?
    Is it a Windows problem - I can achieve a reformatting the drive & re-install of XP soon - it would help?

    Roger.

    [email protected]

    Hello

    As far as I understand your problem, you are not able to use the external microphone. Am I wrong?
    You mean that it's a hardware problem, hmmm I n t think so.
    To me, it looks like a wrong setting

    Please check if the microphone is activated. This should be verified in the--> sound & audio devices Control Panel.
    On the volume tab, press the Advanced button.

    In the options settings, you can switch between the playback volume controls & record.
    Please check everything!

  • Equium M50-216: reader of CD-Rom does not work

    Hi, I have owned my PC laptop toshiba equium m50-216 for 2 months. I haven't used the drive for about 3 weeks, but it worked very well. I went to use it today and it won't work.

    When I start an orange light flashes. Then that's it, it will not eject and if I manually eject and then put a record it is not recognized. Maybe I accidentally activated a safety lock or the somets? Thank you

    Post edited by: glenn1332

    Hello

    As much as I know there is no any kind of safety lock. The drive is listed correctly in the Device Manager and windows Explorer?

  • Re: Equium M50-216 - lines across the screen

    Hi my Equium M50-216 has lines across the screen and low who go up and down the screen.
    There is no picture it s just white.

    If I plug it into an external monitor I get a fine display on the monitor is so the screen is defective or something else?
    I think that the inverter is ok because it of bright and not dull.

    See you soon

    I agree with Luke.

    If the image on the external monitor is ok then the graphics card should be ok.
    If an FL inverter would be defective then everything would be visible, but just a little more dark and as behind a fog

    In your case, it looks like a display problem

    I think you should ask a technician for replacement laptop

  • Equium M50-216 - Microphone does not work

    Hello world

    someone please can help me with my laptop Toshiba Equium M50-216.

    Recently, I have problem with audio, actually does not work the microphone that I use Skype a lot.
    I can hear the other side, but they can't hear me, as the microphone is broken or I put t know, what I have to download a new audio software?

    You have yellow exclamation marks in Device Manager?

    Try to update the audio driver you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

    What microphone or headset do you use? AFAIK the Equium M50 doesn t have built in microphone.

  • Equium M50-216: I am unable to mount the module memory

    I could not (physically) to fit more memory Ram DDR2 PC2-4300 (200 pin SODIMM to 533 MHz). Can you confirm that this is the correct memory of the standard. Thank you

    Equium M50-216 supports PC2700 DDR - RAM modules.
    If you want to upgrade the unit, you must use these modules:
    PC2700 256 MB (PA3311U - 2M 25)
    PC2700 512 MB (PA3312U - 2M 51)
    1024MO PC2700 (PA3313U-2M1G)

    Unit of PA3313U-2M1G supports 1024 MB PC2700 DDR SODIMM (333 MHz)

  • Equium M50-216 - Question about the new facility

    Hello

    Recently rescued a laptop Equium M50 of my flat mate. Was a little out of adjustment. She said that I might have as could not get on the internet and it seems to be missing some vital files.

    Managed to get the wireless working again and little removed from the trash which was on it, but there are larger issues for example. Whatever it is USB I plug it will not install as there are no drivers on the HARD drive.

    I think that it probably needs to be formatted and have Windows XP Home Edition reinstalled but I did not all discs for her and do not want to spend hundreds of new software to purchase for it. Please let me know what are my best options.

    Best regards

    Ed

    > have Windows XP Home Edition reinstalled, but I did not all discs for her
    That s confusing you reinstalled Windows XP, but why you need the laptop drives? I mean if Windows XP is already reinstalled you can start with the installation of the driver. Everything can be downloaded on the official website of Toshiba:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Your laptop is an older model so you should look for in * Archives *.

  • Equium M50-192 - upgrade to Windows 7

    I have an Equium M50 - 192, model No. PSM59E-003008AV, running on XP.
    My PC is Windows 7 and I have two machines on the same OS.

    Windows 7 Advisor on the Microsoft website shows that this M50 - 192 is suitable for an upgrade.
    I have already increased the memory to 2 GB.

    However, when I checked the Web from Toshiba site for pilots, there seems to be no driver Windows 7 for M50 - 192.

    Means that I can not upgrade to Windows 7?

    Hello

    Of course, you can install the Win 7 OS even if Win 7 drivers are not available for this unit.

    From my experience the Win 7 automatically looks for drivers and in most cases, the drivers are automatically installed in my case I didn t need to install the display in addition driver Win 7 found the drivers during the installation and process installation

  • Replacing the drive HARD on Equium M50-216

    Hello

    I'm looking into upgrading the hard drive in my M50-216, which currently has a MK4026GAX. The player that I am most interested is the MK8032GAX. Is this a suitable replacement, that is going to work?

    A few questions:

    1. I guess it's just a case of withdrawal of the current drive, mortising the new one and start using my Toshiba restore CD? This will reinstall the Norton junk as well?

    2. assuming I have remove the current without shape, i.e. I leave it as it is, I suppose that if I find the new drive does not work I'll be able to put the former back in and it will start like nothing happened? I'm not changing any other material.

    3. it will work as a trolley suitable for the old disk: http://www.scan.co.uk/Products/ProductInfo.asp?WebProductID=414030

    4. the most important question will be affecting my current standard warranty, or assign an extension of warranty if I choose to buy a more this year?

    Thank you
    Baillie

    Old disk HARD 40 GB MK4026GAX
    New disk HARD 80 GB MK8032GAX

    The BIOS should recognize up to 100 GB HARD drive

    1.) Yes it should market. Also, it should be possible to install Norton ghost image files
    2.) Yes, it should be possible to put the old HDD and start the laptop.
    (3.) if the new HARD drive supports the IDE interface, it should be possible to use it in the external USB case
    4.) No, the upgrade of the HARD drive should t has no effect on the guarantee

  • Equium M50-216 - new HARD drive is not recognized

    After finding that my [laptop | http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&DISC_MODEL=0 & ACTION = PRINT_WITH_BACK & com decided .do w .broadvision = Yes & PRODUCT_ID = 113323] has a hard to die in the car, I went and bought a replacement for her. Originally, the laptop had a 40 GB IDE drive, and I thought that if I had to replace the drive, then I might as well have a higher capacity drive. So I bought a [hard drive 160 GB Samsung IDE | http://www.samsung.com/global/business/hdd/productmodel.do?type=62&subtype=67&model_cd=294#] eBay.

    Upon receipt and installation of the drive unit, I found that when I tried to open the BIOS, it would take some time to open (such as the boot device selection menu), and once it does, under the hard drive unit, it says 'none '. I tried to remove and to reinstall the drive, I have ensured that there are no jumpers on the drive and I also tried to install Ubuntu on it anyway, but the partitioning program shows nothing. If I insert the old drive, everything works fine

    As far as I know, the problem could arise because of two reasons; because I had swizzed on eBay, either because the BIOS of the laptop or the motherboard supports up to a certain capacity. I hope that it is not one of those who, as I bought this disc waited for some time for her due to slow mail and snow.

    Also, I don't know how to test a disc without having to buy some kind of adapter IDE for my main PC. Is there a way that this can be sorted?

    Edit: Considering an update of the BIOS, but struggles to find a way to do without the need to have a version of Windows there.

    Hello

    A long history but a short answer:
    Due to the IDE for your laptop, you are only able to use hard disks up to 128 GB s or let say 120 GB. The laptop has a limitation of LBA 28 bits and thus, you can use t hard drives up to a certain capacity (128 GB).

    By the way: peut t BIOS update to fix this. It s a limitation material so BIOS update will not work.

    You return the HARD drive and buy another one, e. g. 120 GB.

  • Equium M50-216 - need info on the login screen

    I had no problem with the system before, but a week ago I started to experience display problems.

    Basically, the display freezes sometimes or behaves strangely - cutting, interference, etc. This is related to move the screen - fiddling with it puts things right.

    My guess is that it is nothing more serious that a connection cable loose somewhere - because the problem does not spontaneously, but can be triggered if I move on the screen, open or close a little.

    Is there a simple way to get access to the cable connecting the Billboard of the graphics card (?)?

    Thank you very much

    > My guess is that it is nothing more serious that a connection cable loose somewhere - because the problem does not spontaneously, but can be triggered if I move on the screen, open or close a little. Is there a simple way to get access to the cable connecting the Billboard of the graphics card (?)?

    Did you experience M50 laptop?
    I guess you don t have because you ask here in the forum. In this case you n t know exactly how do to disassemble the laptop and it is not very easy and very delicate!
    Using an order wrong can damage certain parts in the worst case that the display will not work.

    The warranty is valid? If yes then you shouldn't t try to disassemble the laptop by yourself, as this would negate the warranty.

    In addition, you are not 100% sure that the loose cable connection causes this problem. You guess that and in my opinion it s not enough to perform the disassembly laptop!

    I'll give you good advice; Contact a specialist of the laptop!

    In this case, you are on the right side

  • Driver HARD drive required for installing XP on my Equium M50-216

    Where can I find this driver? Ive looked in the wire section but theres no clearly marked driver for it. Installation of XP is stalled at "Setup is starting Windows XP", Ive updated to update the BIOS, so that's all I can think about

    Could you please put first what model/series laptop do you have?

    Published in you the driver second messages has been designed to use the RAID functionality.
    You have RAID?

  • I need drivers for Equium M50-216

    Please help me.
    I have some problem to get my model drivers on your site. I upgraded my operating system to windows vista and the sound stops working.
    Please, what should I do?

    You can find the drivers in the ARCHIVE. So, to open the download page of Toshiba and under product type, select ARCHIVE. Problem is that your laptop is not supported for Vista, and you will not find driver sound it.

    I found the info your laptop has its Realtek ALC AC97 250 card.

    Try to find the Vista driver on the support page of Realtek. Please let me know if you have found it.

  • White screen on model Equium M50-216 SM57E problem

    I'm having a strange problem with the computer screen... Start-up of the laptop... against the cold, the Toshiba logo flickers then the windows logo then flashes black... However, the screen is still backlit... The laptop works perfectly apart from that. I can connect to external monitors and it works very well, but here's the weird thing...

    I connected on three different monitors it works in 2 4:3 monitors. It does not work in my wide screen... when he starts the Toshiba logo comes up then the windows logo then just prior to the Welcome screen of windows (that blue thing at the beginning) the monitor says no signal.

    After a while the display on the laptop will appear and be fine until I stopped it (usually, sometimes the screen off, and without touching it's back in a minute).

    The white screen comes generally from when the laptop is started after being off for a while; For example, suppose that during the night... I simply closed the lid last night, and no do not stop correctly then when I opened it this morning the screen worked perfectly. There is no other display weirdness... bad pixels, lines, anomalies of any other nature.

    I recently reinstalled everything and the problem is still there. Please say it is (Hey! the screen comes back) a driver problem or something as simple

    Help with this (or even a suggestion) would be greatly appreciated
    See you soon
    Dave

    PS: everything works fine apart from this.

    Hi mate

    The story sounds very mysterious and my first thought is that it might be an unwanted material.

    But usually it of not easy to provide a diagnosis exactly and we should first check if the software doesn't cause questions!

    So first of all, it would be interesting to know if the same thing happens on laptop retrieved fresh. Using the recovery CD, you would get the factory settings!

    A BIOS and update the graphics driver are the following options!

    So check it out and let me know the results

    See you soon

Maybe you are looking for

  • frozen MacPro startup

    While working online screen of my MacBook Pro suddenly went grey. I turned off by holding the power button, and then he started upward. He would charge the Apple starts the bar and after it went down to about 1/3 of the way suddenly turned. I tried a

  • install the new graphics card

    I just bought the Skyrim game and want to play on an old PC.  I don't know what product I'm looking, maybe a new diet, but also a graphics card. Here are the details... hope this is enough information: HP Pavilion A6403W Windows XP Intel (R) Pentium

  • cannot install webcam creative VF-0040

    Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: problem event name: PnPDriverNotFound Architecture: x 64 Hardware ID: USB\VID_041E & PID_4034 & REV_0100 OS version: 6.0.6002.2.2.0.256.6

  • Drawing on the viewfinder

    Hi guys,. Very general question: is it possible to draw something or place an image on the camera viewfinder preview without going through the part of the image in the viewfinder coverage? For example, I want to put a dot.png on the screen, but have

  • How to check the availability of the Blackberry applications

    Hello I want to check the application of black berrymaps is available or before calling in my application, please help me how do to the avalability of the application...