Equium M50-244 does not not to wake up on LAN

A notebook Equium M50-244 does not meet the magic packet WOL.

The BIOS settings are correct and show adapter LAN ENABLED, Wake on LAN: ENABLED.

The sticker on the laptop and the original box gives a different MAC address to know what the device itself (ifconfig or lshw). No matter, the laptop does not account the magic packets for two MAC addresses.

Using Wireshark, I see that the WOL packets are certainly diffuse with properly formatted MAC addresses.

My thought is now that it is a BIOS problem but I can't find the right bios for this machine.

What would be the best bios match? Keep in mind this box is Linux.

Thanks in advance for any help.

See you soon

Nick

Hello

Have you checked if the WOL is enabled in the network card settings?
Do you know how to check this?

Go to the Device Manager, expand network adapter s and mark LAN card.
Then, go to the properties of the network adapter and check the Advanced tab.

There are a lot of different settings and a configuration option must refer to the WOL.

Tags: Toshiba

Similar Questions

  • Recommended memory for Equium M50-164 does not fit

    I have the Equium M50-164 in its original configuration.

    I wanted to add more memory, so, on the recommendation of the Toshiba Product Support page, I bought the Toshiba PA3411S-2M1G memory (from eBuyer) module.

    http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/individualOptions.do?service=UK&OPTION_ID=118626&t oshibaShop = true & SelCategorie = 4700

    Trying to mount the module of memory in my machine, I found that it is not! 'Separator' plastic between the two contacts on the laptop computer does not match the position of the notch between the two sets of pins on the memory module.

    Tosh recommends part number: PA3411S - 2M1G 1024 MB (1 GB) memory PC2-4300 (533 MHz) DDR2

    The memory that's happened has PA3411S-2M1G 1024 MB (1 GB) PC2-4200 (533 MHz) DDR2 memory on the box.

    Someone in the forums said that PC2700 PA3313U-2M1G is the part number.

    The manual supplied with the M50 means memory PC2700 .

    Anyone know the number, or an alternative appropriate by another manufacturer?

    I am very annoyed, as hotline support suggested, I phone their sales department! So they can sell me more wrong memory strips? Now look forward how the glove of returns with eBuyer...

    See you soon,.

    Andy

    Try here... http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=20384&ft=m&st=3

  • Equium M50-164 does not work after the spill of water

    I bought a laptop Toshiba Equium M50-164 last year.
    I paid a lot of money, now it does not work.
    I can't afford to write that he took so therefore must operate.

    The reason why it does not work is the water spilled on it.

    I took it to a specialist. I found in the repertoire of Thompson, I paid him £50 and he siad he probably one
    new motherboard and so not worth repairing as it comes to Toshiba and their parts are expensive etc...
    Is this fair?

    I'm desperate to fix but don't know how.

    Help, please. Without doubt, I should be able to buy a motherboard for the laptop without costing an arm or a leg.

    Hello

    As you probably know that the laptop parts are not cheap because of miniaturization and mobility.
    The LCD screen and the motherboard are the more expensive parts that are used in the laptop. I na? not know if Toshiba parts are more expensive. I guess it depends on the features of the laptop.

    However, the new motherboard is very expensive and I think that the search for unity of second hand with the motherboard isn't a bad idea.
    CA? s your choice. New motherboard = expensive but with card guarantee or second hand mother = cheaper, but no guarantee

    PS: the replacement of the motherboard is not very easy and that's why if you have no experience you should ask a technician for help.

  • Equium M50-192 does not start

    Hello
    I posted a question here earlier on my laptop and I had useful assistance but he juices do not appear to have sorted.
    but I have now no wat it is not and just don't need to know wat it is

    I have a toshiba m50-192
    and when I turn it on it does not start going to a black screen and gives me errors (pxe - e61)

    in my last question, I was told that it was the hard drive was dead.
    Since then, I've replaced my hard drive and my hard drive, but it always seems to be doing almost the same

    I can get into my bios and the hard drive is recognized.
    I tried to boot from the disk recovery and hard drive but no joy.

    but since I replaced both drives when I boot from the hard drive it gos just a black screen with the little line in the upper right corner.

    but when I boot from the disk it gives me this error pxe - e61, which is where his tent to boot from the network I have read.

    until I replaced my hard drive, he had a strong look that has disappeared since I replaced it.
    the disk hard im trying to use now is off my brother's mobile which all ready installed xp on it it would make a difference when you try to boot from the hard drive? (my laptop is xp)

    I read something on definition of my hard drive to the master and my cd player to the slave that would make a difference and how would I do?

    I think it's as much information im aware off

    could someone please help as im stuck and did not have any idea what to do

    Post edited by: domio
    o im also getting the and pxe - e61 pxe - m0f error code

    Hello!

    What happens to an error you get? Please post what we can help you.

    To be honest that I n don't know what you mean with clip Ribbon keyboard but if the keyboard is faulty or something else, the keyboard completely must be exchanged. You are not a unique key or something else.
    If you want a new keyboard or other spare parts contact your local ASP.

    Good bye

  • Equium M50-164 does not connect to internet

    I bought this laptop 3 months ago, and the wireless internet worked well. Now all of a sudden, it does not connect to wireless internet, so that the pc downstairs. It will not connect also if I connect to the router directly, or even through your phone line ADSL modem.

    Any ideas on how to solve this problem?

    Hello

    Please check device manager if the card network and wireless card are recognized correctly.
    You have installed any 3rd software or have you changed something? Did you get any error messages? Please post more information.

    Good bye

  • WEP encryption key do not forget when you restart the Equium M50-244

    I use a laptop Equium M50-244, with a BT Home Hub 7838 wireless router. Almost everytime I turn on the laptop it has no wireless connection. So I have to go to control panel, network connections and that he can find a new connection.

    I would then type the key to encryption WEP number twice to get a new connection.
    This is obviously a long procedure, so I need to get the laptop to recognize the encryption key and save it for the next time I turn on.

    I am running Windows XP Home Edition with Service Pack 2 and a Norton Anti Virus and Firewall.

    Any help would be appreciated

    Peter

    Hello

    I agree with Louis. Your WLAN cards support WPA encryption and, if possible, you should use it.

    Anyway: try to Setup WLAN to use Windows settings and set WEP password we remind for your WLAN. I have the set up on a lot of laptops different and after choosing the publicly traded WLAN password has already been set and the only thing that must be done is to click on the Connect button.

  • Re: EQuium A100-147, does not boot, \windows\system32\config\system - lack-

    This laptop Equium A100-147started does not connect to the internet normally, but she in safe mode.

    So, after trying the virus scans-nothing.
    Restoration of the system-nothing. I decided to put in the recovery disc and reinstall windows media.
    I changed the boot sequence to install, boot sequence changed to original.

    He has reinstalled but won't get to the Windows screen, a message came \windows\system32\config\system-manquant or damaged.
    I can't see even a way to do a repair with this recovery disk?

    Any help would be appreciated

    Thank you in advance.

    This error means that the registry is damaged.

    The registry consists of the following files:

    c:\windows\system32\config\system
    c:\windows\system32\config\software
    c:\windows\system32\config\sam
    c:\windows\system32\config\security
    c:\windows\system32\config\default

    You can restore these registry files in the restore folder of the system hidden on the C: drive.

    Here are the instructions:
    http://support.Microsoft.com/kb/307545

  • Equium M50-244 has bluescreens and password requested

    Hi all
    I need your help here please, my wife Equium M50-244 just froze after 15 min. I thought out the battery could solve the problem, only now when you turn on the laptop I get blue screen and a request for password that was not supplied with the computer.

    Can anyone help before she beat the life out of me (great she´s).

    Hi friend

    I hope that you´re still alive and your wife didn t just have you beat :)

    Please give more information about your problem. It seemed the first time? And what operating system you have? Have you recently updated some drivers or installed new hardware?

    And no matter what, with this password? I mean that a password does not seem fair to nowhere! Where is this password? BIOS or Windows?

    Man, give a few specific questions with plenty of information, so people here can help you.

    Welcome them

  • Equium M50-244: Question about upgrade memory and Wlan card

    I have a model Equium M50-244. What type of network adapter I need to fit a Wi - Fi connection on my hub (BT)?
    Also, I currently have 512 MB of ram installed. Can I increase this?

    Hi cora,

    Of course, you can improve the memory to a higher value.
    This book must support 2 slots of memory and it should be possible to increase memory for max 2048 MB. In this case, you can use 2 x 1024Mo module.

    I also found information that this laptop will accept this module:
    DDR2 400/533 256 MB (PA3389U - 1 M 25)
    512 MB DDR2-400/533 (PA3412U - 1 M 51)
    1 GB OF DDR2 400/533 (PA3411U-1M1G)

    I put t know if you've experienced the site options & Accessories Toshiba, but if not then visit this:
    HTTP://EU.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/JSP/OPTIONSANDACCESSORIESHOME.DO?SERVICE=EU&ID=ONLINE _ SHOP

    You will find more compatible parts.

  • Equium M50-244: what improvements are possible and the value to do?

    Hi all, I just got an EQUIUM M50-244, I got it yesterday from pc world and im well please with it!
    but I was wondering if there is any update worth it? is it possible the cpu clock? I'm looking for more memory, is there a limit to what I can adapt? is also a bigger hard drive possible? anything else that is worth please let me know

    Thank you, your friendly local snake

    Hello

    General it s not possible to upgrade the processor or the graphics card, but you can upgrade the memory and the HARD drive on this laptop.
    You can upgrade the maximum memory 2048 MB of memory (2x1024Mo) and you can use a with the 80 GB HARD drive may also 100 GB.

    Support memory modules are:
    DDR2 400/533 256 MB (PA3389U - 1 M 25)
    512 MB DDR2-400/533 (PA3412U - 1 M 51)
    1 GB OF DDR2 400/533 (PA3411U-1M1G)

    Hope I could help.

  • Utility Toshiba HWSetup on my Equium M50-244

    Hello

    I would like to run Toshiba HWSetup utility on my Equium M50-244, but it doesn't recognize anything - bios version, or anything else.

    How can I proceed to run?

    Thanks in advance!

    Kind regards
    Plamen

    Hello

    I m wondering what system do you use?
    The Toshiba UE driver page provides tools Equium M50 BOF Win XP only
    The hardware configuration of v1.35.0.4C for Win XP is available on the page, and I assume you are talking about this software? Right?

  • BSOD on Equium M50-244 - error caused by ati2dvag.dll

    Operating system Windows XP SP2, view ATI Radeon xpress 200 m series.

    Hi have an Equium M50-244 with a problem. Seems to work very well, but suddenly goes to a blue screen with the message:
    A problem has been detected, has been shut down to prevent damage.
    The problem seems to be caused by following file ati2dvag.dll
    If this is the first time you've seen this stop screen restart your computer if this screen appears again these steps
    The device driver got stuck in an infinite loop, it usually indicates a problem with the device itself or with the incorrect programming hardware device driver.
    Please check with your hardware device vendor updates the driver.
    STOP: 0X000000EA, 0 84190600, 0XF7983CB4, 0 X 1 0000000 X

    ati2dvag
    beginning physical memory dump

    Have tried to update the drivers of Toshiba, ATI and omega, it makes no difference.
    Of course, there might be a flaw with chipset but diagnosis identifies any problems. If I run windows in safe mode display is ok.

    Other forums seem to report a similar problem with this model and the ATI chipset, but no one seems to have a solution. Can anyone help?

    Hello

    Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=16605

    By the way: the Internet is full of these discussions, but the fact is that to happen on different desktops and laptops. It has nothing to do with the model of YOUR laptop directly.

  • Is it possible to upgrade a processor on an Equium M50-244/CM336DC14/512/40?

    Hi all

    Is it possible to upgrade a processor on an Equium M50-244/CM336DC14/512/40? It has an Intel Celeron M 1.4 GHz processor

    Cheers, Lee

    Hello

    Just for info - http://aps2.toshiba-tro.de/kb0/FAQ7A01ZW0007R01.htm

    Good bye

  • Equium M50-244 - SM Bus controller - all drivers available?

    Laptop bought with XP Home, but has been modified to work with XP Professional.
    Pulled the bottom of all the drivers, I could find on the site Tosh, but in the Device Manager in the section other devices SM Bus controller is marked with a? and an exclamation point.
    Any suggestion where I could find this driver (s).

    This part of the chipset? or is it another device?

    Hello

    Equium M50-244 has a part number PSM59E-xxx.
    In this case you must use the correct driver.
    On the Toshiba page you will also find a statement of installation how to install the drivers.
    You must follow this guideline.

    PS: Just FYI XP pro uses the same drivers as XP home

  • Equium L20-197 does not light up at all - on button / stop flashes and nothing happens

    Hello

    I own an Equium L20-197 and it currently has a power problem. It does not light up at all. When the device is connected to the machine the orange light comes on to show that there is a power source but when I hit the power button the flash just buttons and nothing happens.

    If I hit him again once all the lights go out and the whole system fails.

    Any ideas on how to solve this problem?

    Thank you
    Alan

    Hello

    Did you put this phone in the standby or hibernation mode?

    Read this description, it seems that the laptop has been in one of these modes and cannot wake up.
    Try to remove the battery from the laptop and unplug the power adapter.
    Several waiting time (~ 20 min) and reconnect the battery and the AC adapter.
    Then try again to put the laptop.

    If she will not be able to boot up the laptop I presume the ESF on the dysfunctions of the motherboard.
    In this case the contact of technicians would be desirable.

Maybe you are looking for