Equium M50-244 - SM Bus controller - all drivers available?

Laptop bought with XP Home, but has been modified to work with XP Professional.
Pulled the bottom of all the drivers, I could find on the site Tosh, but in the Device Manager in the section other devices SM Bus controller is marked with a? and an exclamation point.
Any suggestion where I could find this driver (s).

This part of the chipset? or is it another device?

Hello

Equium M50-244 has a part number PSM59E-xxx.
In this case you must use the correct driver.
On the Toshiba page you will also find a statement of installation how to install the drivers.
You must follow this guideline.

PS: Just FYI XP pro uses the same drivers as XP home

Tags: Toshiba

Similar Questions

  • Equium M50-244 has bluescreens and password requested

    Hi all
    I need your help here please, my wife Equium M50-244 just froze after 15 min. I thought out the battery could solve the problem, only now when you turn on the laptop I get blue screen and a request for password that was not supplied with the computer.

    Can anyone help before she beat the life out of me (great she´s).

    Hi friend

    I hope that you´re still alive and your wife didn t just have you beat :)

    Please give more information about your problem. It seemed the first time? And what operating system you have? Have you recently updated some drivers or installed new hardware?

    And no matter what, with this password? I mean that a password does not seem fair to nowhere! Where is this password? BIOS or Windows?

    Man, give a few specific questions with plenty of information, so people here can help you.

    Welcome them

  • BSOD on Equium M50-244 - error caused by ati2dvag.dll

    Operating system Windows XP SP2, view ATI Radeon xpress 200 m series.

    Hi have an Equium M50-244 with a problem. Seems to work very well, but suddenly goes to a blue screen with the message:
    A problem has been detected, has been shut down to prevent damage.
    The problem seems to be caused by following file ati2dvag.dll
    If this is the first time you've seen this stop screen restart your computer if this screen appears again these steps
    The device driver got stuck in an infinite loop, it usually indicates a problem with the device itself or with the incorrect programming hardware device driver.
    Please check with your hardware device vendor updates the driver.
    STOP: 0X000000EA, 0 84190600, 0XF7983CB4, 0 X 1 0000000 X

    ati2dvag
    beginning physical memory dump

    Have tried to update the drivers of Toshiba, ATI and omega, it makes no difference.
    Of course, there might be a flaw with chipset but diagnosis identifies any problems. If I run windows in safe mode display is ok.

    Other forums seem to report a similar problem with this model and the ATI chipset, but no one seems to have a solution. Can anyone help?

    Hello

    Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=16605

    By the way: the Internet is full of these discussions, but the fact is that to happen on different desktops and laptops. It has nothing to do with the model of YOUR laptop directly.

  • Is it possible to upgrade a processor on an Equium M50-244/CM336DC14/512/40?

    Hi all

    Is it possible to upgrade a processor on an Equium M50-244/CM336DC14/512/40? It has an Intel Celeron M 1.4 GHz processor

    Cheers, Lee

    Hello

    Just for info - http://aps2.toshiba-tro.de/kb0/FAQ7A01ZW0007R01.htm

    Good bye

  • Equium M50-244: what improvements are possible and the value to do?

    Hi all, I just got an EQUIUM M50-244, I got it yesterday from pc world and im well please with it!
    but I was wondering if there is any update worth it? is it possible the cpu clock? I'm looking for more memory, is there a limit to what I can adapt? is also a bigger hard drive possible? anything else that is worth please let me know

    Thank you, your friendly local snake

    Hello

    General it s not possible to upgrade the processor or the graphics card, but you can upgrade the memory and the HARD drive on this laptop.
    You can upgrade the maximum memory 2048 MB of memory (2x1024Mo) and you can use a with the 80 GB HARD drive may also 100 GB.

    Support memory modules are:
    DDR2 400/533 256 MB (PA3389U - 1 M 25)
    512 MB DDR2-400/533 (PA3412U - 1 M 51)
    1 GB OF DDR2 400/533 (PA3411U-1M1G)

    Hope I could help.

  • Utility Toshiba HWSetup on my Equium M50-244

    Hello

    I would like to run Toshiba HWSetup utility on my Equium M50-244, but it doesn't recognize anything - bios version, or anything else.

    How can I proceed to run?

    Thanks in advance!

    Kind regards
    Plamen

    Hello

    I m wondering what system do you use?
    The Toshiba UE driver page provides tools Equium M50 BOF Win XP only
    The hardware configuration of v1.35.0.4C for Win XP is available on the page, and I assume you are talking about this software? Right?

  • WEP encryption key do not forget when you restart the Equium M50-244

    I use a laptop Equium M50-244, with a BT Home Hub 7838 wireless router. Almost everytime I turn on the laptop it has no wireless connection. So I have to go to control panel, network connections and that he can find a new connection.

    I would then type the key to encryption WEP number twice to get a new connection.
    This is obviously a long procedure, so I need to get the laptop to recognize the encryption key and save it for the next time I turn on.

    I am running Windows XP Home Edition with Service Pack 2 and a Norton Anti Virus and Firewall.

    Any help would be appreciated

    Peter

    Hello

    I agree with Louis. Your WLAN cards support WPA encryption and, if possible, you should use it.

    Anyway: try to Setup WLAN to use Windows settings and set WEP password we remind for your WLAN. I have the set up on a lot of laptops different and after choosing the publicly traded WLAN password has already been set and the only thing that must be done is to click on the Connect button.

  • Equium M50-244 does not not to wake up on LAN

    A notebook Equium M50-244 does not meet the magic packet WOL.

    The BIOS settings are correct and show adapter LAN ENABLED, Wake on LAN: ENABLED.

    The sticker on the laptop and the original box gives a different MAC address to know what the device itself (ifconfig or lshw). No matter, the laptop does not account the magic packets for two MAC addresses.

    Using Wireshark, I see that the WOL packets are certainly diffuse with properly formatted MAC addresses.

    My thought is now that it is a BIOS problem but I can't find the right bios for this machine.

    What would be the best bios match? Keep in mind this box is Linux.

    Thanks in advance for any help.

    See you soon

    Nick

    Hello

    Have you checked if the WOL is enabled in the network card settings?
    Do you know how to check this?

    Go to the Device Manager, expand network adapter s and mark LAN card.
    Then, go to the properties of the network adapter and check the Advanced tab.

    There are a lot of different settings and a configuration option must refer to the WOL.

  • Equium M50-244: Question about upgrade memory and Wlan card

    I have a model Equium M50-244. What type of network adapter I need to fit a Wi - Fi connection on my hub (BT)?
    Also, I currently have 512 MB of ram installed. Can I increase this?

    Hi cora,

    Of course, you can improve the memory to a higher value.
    This book must support 2 slots of memory and it should be possible to increase memory for max 2048 MB. In this case, you can use 2 x 1024Mo module.

    I also found information that this laptop will accept this module:
    DDR2 400/533 256 MB (PA3389U - 1 M 25)
    512 MB DDR2-400/533 (PA3412U - 1 M 51)
    1 GB OF DDR2 400/533 (PA3411U-1M1G)

    I put t know if you've experienced the site options & Accessories Toshiba, but if not then visit this:
    HTTP://EU.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/JSP/OPTIONSANDACCESSORIESHOME.DO?SERVICE=EU&ID=ONLINE _ SHOP

    You will find more compatible parts.

  • Need Driver USB for Equium M50-244

    I installed Win XP Pro on my M50-244, but whenever I plug a data stick in the USB port, I get a message about the connection USB could be faster with USB 2 blah blah.
    Under the control panel the controller USB has a yellow question mark on it. Can someone tell me please where to find the USB driver that is appropriate for it?

    See you soon

    The laptop uses the standard Microsoft Windows USB driver. On the Toshiba page you will find all the special USB drivers for WinXP.
    Have you used the recovery CD or did you install the OS of Microsoft CD?
    Possibly, you have not installed the chipset driver?

  • Need driver for on Equium A100-549 sm bus controller

    I need a file to install the sm bus controller Please help, im using XP SP2, I don't have my original disc I lost when I moved it, used a XP disc base with my serial number, all happened in execpt the sm bus controller and WIFI doesn't connect, there problems pleasse help.

    Visit the download page for Toshiba under http://eu.computers.toshiba-europe.com > support & downloads. Here you can find all the drivers for your laptop model. Please install all drivers following instructions facilities document.

    Start with installing the Chipset driver.

  • Equium M50-244: loop problem internal ati2dvag.dll

    I had a M50-244 XP Home Edition (sp2) who have ATI onboard until I uninstalled it completely. The laptop has become totally useless vomit ati2dvag.dll inner loop problem and nothing seemed to heal so I decided to completely get rid of ATI.

    It started with VGASAVE which, with a few adjustments, work is fine and so my machine now. I disabled the video as controller he kept coming up with "new hardware found" and I didn't load the drivers more who would do what he started crashing again.

    Currently its on 'test' and I'm doing everything possible to see if it will crash once again, I hope not.

    Maybe I need another driver and activate the video controller, but I am hated for doing anything more now that his works normally, finally!

    Some said the installation of the graphics driver on the site omegadrivers.net and improves the performance of the graphics card.
    Maybe an installation of the driver from the site could be useful.

    Check it out

  • SM Bus controller device drivers are not installed (code 28) XP Home Edition

    Recently, I installed Norton 360 and ran a diagnostic report which found the device SM Bus controller drivers are not installed (code 28).  I tried to re - install from the original disc of XP Home Edition, but he couldn't find it.  Where can I download this from and how to install iI?  Thank you.

    Hello

    Thanks for posting your query in Microsoft Community.

    According the information you have provided, I understand that you found the error code 28 in Windows XP. I will certainly help you in this matter.

    Please follow the link and check it out.

    Explanation of error codes generated by Device Manager in Windows XP Professional

    http://support.Microsoft.com/kb/310123

    Using the windows-related issues feel free to post on the Microsoft Community Forum.

  • [Pavilion g6 Win7 64 bit] SM Bus controller and drivers Touchpad

    Hello, after scouring the forum I managed to find my drivers but for the SM Bus controller.

    This is the ID of the hardware for the SM Bus controller:

    PCI\VEN_1022 & DEV_780B & SUBSYS_1849103C & REV_14

    PCI\VEN_1022 & DEV_780B & SUBSYS_1849103C
    PCI\VEN_1022 & DEV_780B & CC_0C0500
    PCI\VEN_1022 & DEV_780B & CC_0C05

    Please note that I am on a g6 Pavilion which I downgraded to Windows 7 64 bit.

    My other question, which seems to be linked to drivers, is that I can't turn off my touchpad or use it to its full extent. I want to do that while I use my usb mouse, because it makes typing messy when I accidentally touch the touchpad. Normally I would be able to double tap the top left of the touchpad where there is a dash, and it will close or turn on, but since the downgrade I have not been able to do.

    Thank you for your time.

    Hello:

    The only suggestion I can offer about the touchpad if you already tried the socket driver in charge of your laptop and driver page would be to try that one directly from Synaptics.

    http://www.Synaptics.com/en/drivers.php

    The smbus controller, I can certainly help you with...

    Here's what I did... I have zipped and attached below in attachments, the raw smbus controller driver files to decompress and install manually.

    Download and unzip the file.

    Go to Device Manager and click the controller smbus needing drivers.  Click the driver tab.  Click on set to update driver.

    Select her browse my computer for driver software option and navigate to the driver folder that you unzipped.

    Make sure that the include subfolders is selected and the driver should install.  Then restart.

  • USB 2.0 - CRW & SM Bus controller. Drivers not found

    Hello

    I m not looking for drivers for SM Bus Controller & USB2.0 - CRW. I have looked everywhere and "update driver software" in Device manager isn´t to find them. So detect the Dell system isn´t. Both have exclamation points and status of the device are "the drivers for this device are not installed. (Code 28)
    There is no compatible driver for this device. To find a driver for this device, click Update driver. »

    I m running Dell Inspiron 5547.

    SM Bus controller hardware ID

    PCI\VEN_8086 & DEV_9C22 & SUBSYS_06401028 & REV_04
    PCI\VEN_8086 & DEV_9C22 & SUBSYS_06401028
    PCI\VEN_8086 & DEV_9C22 & CC_0C0500
    PCI\VEN_8086 & DEV_9C22 & CC_0C05

    USB 2.0 - CRW hardware ID

    USB\VID_0BDA & PID_0129 & REV_3960
    USB\VID_0BDA & PID_0129

    Hi Reedik,

    You reinstall Windows, or is this just error pop up? What version of Windows?

Maybe you are looking for

  • My Firefox (v13.0.1) does not play swf. Why?

    I use Firefox 13.0.1 and Flash player plugin 11.3 is installed. But today, Firefox is not play swf files and display this file in flash instead of the message: "touch here to activate the plugin.

  • Satellite P300 - 19 p - WLan does not work

    Hi all I recently bought a Satellite P300 - 19 p and at home I had a connection to the LAN cable to go online but 2 days after purchase I flew to Africa for a year and now when I try to connect to the Internet wirelessly, I discover that the bleeding

  • My Sandisk drive troubleshooting to see if he's dead

    Hi all, thanks for making me sign up with you. I am not very computer so fingers crossed I get this right. 2 years almost to the day, I bought a computer "skeleton" and a friend of my has taken some parts of my old computer and put it in the new comp

  • Unable to install HP Deskjet F4500 all-in-One Series

    I'm trying to install the HP Deskjet F4500 all-in-one series software on my 15 HP 8.1 Windows 64-bit machine.  When I run the Setup, during the activity to check system files, I get a message error "cannot find file system' Appdata\Local\7zs39b6\Temp

  • Broken DVD CD player

    Hello! We have a 17 dell studio (the cd/dvd drive is internal)CD player worked perfectly, while adding a cd in itunes, but stopped at halfway through, now when you add a disk it does not recognize that it has been added. If go you into my computer an