Equium M50 - cannot find the second memory location

Similar Questions

• Equium M50 cannot read the recovery disk

  I have a fairly old Toshiba Equium M50 - 164. I lost a few configuration etc files and wants to rest to factory settings.
  I have the recovery disk, however, the reader does not read it. I tried other discs and that they is not read.

  Any suggestions? Thank you

  And what is with the operating system?
  Different discs are readable on operating system?

• Can not find the second slot memory on my Satellite M40x-112

  Hi people,

  I want to improve my memory, preinstalled are 2 sticks of 512 MB. In the description it is said that the maximum is 2 GB so I bought 2 x 1 GB, unfortunately I can only find a housing... Is someone can you please tell me where is the other?
  Thank you

  Welcome,
  Sebastian

  Well, I found information that one slot is USER scalable. This means that the user can upgrade the memory only in a slot located at the bottom of the unit.

  I guess that the second location is hidden somewhere under the keyboard and the keyboard should be removed first to reach the second memory location.
  But this would nullify the warranty if you would remove the keyboard by yourself.

  In my opinion, you should contact technician tan allowed for this upgrade

  Greetings

• Re: Satellite Pro A210-1AZ: second memory location

  I am trying to upgrade the memory on my Satellite Pro A210-1AZ. I found the 1st slot where the manual has highlighted, but can not find the slot 2. I took the keyboard and looked under but still couldn't find it. Anyone happen to know?

  Thank you very much.

  Hello

  I think that the second memory location is placed near the first memory slot.
  It must be hidden under the memory module!

  Check it!

• HP pavilion 15-p153nm: I can't find the second slot of memory RAM... pls help

  So I bought the new laptop (hp pavilion 15-p153nm), in the shop where I bought it says that this laptop have two memory slots, so I buy the new 4 gb ddr3 ram card and wanted to put in the free memory slot, but when I opened the laptop that I couldn't find free one slot... so my question is where is this second slot... I use other products (printers and laptop computers HP etc.) for 10y and if this is an hp error and they didn't put the second slot in this notebook, I'll be very disappointed.
  And yes I find manual for this laptop, I opened this laptop from this manual and he drew two memory cards but its all is said about memory cards. I have pictures of the laptop and everything and I will put them here.

  

  

  Configuration software Specy

  

  It says that I have a free slot? but I still don't see.

  Now I'll put pictures of the laptop inside

  

  under the keyboard

  

  Other side of the main card

  

  Under the motherboard

  So pls help me to solve this mystery of the second memory slot.

  And sry for my English isn't my main language.

  TNX for helping me. Good bye

  There is no second slot of memory in this model specification.

  You need to replace the module installed with a capaity module above uppgrade the memory capacity.

  On the three t pageit the manual describes two locations only on some models. It does not describe what models they are.

  

• Cannot find the memory of the satellite 1900 203

  My satellite 1900 203 has a memory problem and I want to replace it.
  The manual says there is no memory which is really internal and fixed to the motherboard. The memory would be on 2 slots extension, available for the upgrade to 1 GB.
  On the place indicated, I see a location for a memory, but it is empty. Place a module of memory here upgraded the size, but does not solve the problem.

  Can anyone tell me where I can find the internal memory, if it is fixed or not and give me the part number.

  Thank you!

  Hello
  the part number for your 1900-xxx:
  PA3126U - 1 M 12 PC2100 128 MB
  PA3127U - 1 M 25 PC2100 256 MB
  PA3164U - 1 M 51 PC2100 512 MB

  The internal memory module is placed in a standard memory slot under the keyboard. You must remove the little plastic cover where the Power On button. Then, you will see two screws that hold the keyboard. After removing, turn the keyboard on the palm rest. Then on the MOA, you will see a small sheet of aluminum foil. Under the present the memory module is located

• ERROR 1606 cannot find the location of the network 0

  I am SO frustrated! I try to install the taxes of the State VA FRO H & R Block home. Whenever I do I get ERROR 1606. He can not find the network 0 location. I have Vista and have bought 2 registry cleaners and tried all of the suggestions online. I'm ready to scream!  Help!

  See if this Support Microsoft tutorial can help you.

  Error 1606: Could not access network location
  http://support.Microsoft.com/kb/886549

  It has a "Fix it for me" application and a "I'll fix it myself" instructions.

• The following error occurred while importing IMG_ #. JPG: The system cannot find the specified file.

  It really starts to annoy me. For some reason, Windows does not allow me to import my photos with Windows more, I was able to import pictures all the time, but all of a sudden it stopped. I tried the import with the program auto-importation of Windows and then I tried to use the import software called Windows Live Gallery. Both gave me the same error message "the following error occurred while importing IMG_ #.» JPG: The system cannot find the specified file. "I tried looking up this error on many sites and have not led to what. I tried to re-formating my memory card but it did not work. Please help me, I can not import all the images and is running out of memory cards, I don't want to delete the images I took because I can not import to my computer.

  Thank you.

  Hello
   
  1. you try to import these images on the camera?
  2. have you checked if the image files are present on the device?
   
  First cross check if the photos are present on the device and if you are importing from the right location. Try to copy the files manually and paste it on the desktop and see if it works.
   
  For more information on troubleshooting camera connection problems, visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems
   
  Post back with the results, so that we can help you better.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Setup error "the system cannot find the specified file" (hpzprl40.exe)

  Trying to install HP Photosmart c5180 all-in-one using the latest version of the software download at HP and have Windows 7 Asus desktop computer. Receive error install "the system cannot find the specified file" (hpzprl40.exe), and the wizard stops.  Help, please.

  Hi loveisus,

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

• Satellite M105-S3041: where to find a second memory slot

  Hello everyone!

  I just desperately on the TOSHIBA forums for an emergency with a few tech question (more than a problem).
  I own a TOSHIBA Satellite M105-S3041, I currently have Windows Vista Edition full, but only with 512 MB of RAM.
  Yes, he did run the badly slow, so I bought 4 GB of RAM (two sticks of Kingston 2.0 GB).

  Now, the real problem comes when I begin to wonder "how I go to install", I turned upside down from my laptop and I find this small 'door' affluent as a memory icon little engraved.
  So I guess that's where the RAM memory.
  Now, my wealthy laptop RAM TWO modules for up to 4 GB of RAM, as stated in the User Guide, but when I opened the small 'gate' I saw that he was (or seemed to) that a SINGLE module and I couldn't see the stick of 512 MB of RAM today!

  Until "my computer is running on imaginary memory!
  Laughing out loud! "and I can not find the second module!

  Help, please! I need to install any memory now and here where I live there Center support TOSHIBA No. or even a dealer who could help me!
  So I depend only on TOSHIBA online support!, IF possible, in response, I can get a link to a video tutorial or maybe you guys include photos in your answers to guide me?

  Thank you very much!
  Trino A.

  I think that it has already solved the problem. ;)

  Otherwise, he would publish again.

• Vista cannot find the mouse USB - Satellite P100 - 434 PSPADE driver

  * Need help to install a mouse optical usb on vista32 *.

  I have two mice, two optical usb, 1 wired and 1 wireless. They are the two plug-and-play so when to plug their vista must locate and install the right drivers automatically... it can't.
  Vista search drivers on the disk and hard on the internet.

  "" looking software... looking for an online software.. "."

  Then says:
  "Windows encountered a problem installing the software driver for your device."
  Windows found driver software for your device but encountered an error trying to install it.
  USB Human Interface Device
  The system cannot find the specified file. »

  They are plug-and-play and just install automatically, there is no driver CD that come with the mouse.

  I have a Toshiba Satellite PSPADE P100-434 with Vista 32 bit purchsed new 2 weeks ago.

  Help, please... Thank you!

  It's strange, because the standard optical mouse should be installed without time and without the need of specific drivers.
  Did you check the homepage of the manufacturer for drivers?

  And have you installed all the latest updates for microsoft windows and SP1?

• Satellite T110-11U - cannot find the router WLAN

  Hello

  I have a Toshiba Satellite T110-11U. Have had since February and loved it-fortunately it wireless used throughout the House. Then one day on a month, unless I was in the same room that the wireless router, Wireless does not work. I have 2 other laptops (and iPhone) which still connect wirelessly throughout the House and the garden without problem.
  As you can imagine, it was very strange. When I take in the garden, my other laptops are all networks wireless in the region, but my Toshiba can't find any.

  Suspecting it was a driver problem, I made sure that the wireless drivers are up-to-date. With no joy, I got the system as it was at the time of purchase (do a complete restoration by interupting, starting and leaving the hard drive to be deleted and reinstalled etc.). Still the same problem. I even changed the rooms in which the router is, and the same problem - the Toshiba cannot find the router unless the router is located a few meters from the laptop.

  Until I lose the will to live, can anyone suggest the cause of my problems, or is it time I admitted defeat and brought back to the Comet under warranty (where likely test next to a wireless router and tell me everything is fine!).

  Thank you very much

  Steve.

  Hey Buddy,

  Did you check if the wireless network card is recognized correctly in the Device Manager? There may be a yellow exclamation or unknown device. Try also updating the driver WLAN from Toshiba Web site:
  http://APS2.toshiba-tro.de/WLAN/

  See all other WLAN routers?
  The wireless network card can be activated using a combination of keys FN + F8 and in the BIOS. In the BIOS, you should also load default settings and test again.

• Photosmart C4780 installation fails at the "system cannot find the file specified."

  My problem began simply with your printer, a HP Photosmart C4780, who has always had a wireless connection and would not print.  Initially, the checked network connection fine control panel of the printer.  I ran a Microsoft printer troubleshooting, which found a block in line print and authorized.  The first test page print, but did print the "internal test page.  I did not understand what it meant, so I looked for help on the HP site.

  I ran the HP print and Scan Doctorand he suggested I have reinstall the driver.  I have downloaded and saved the current HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I tried to install a new, a window pops up saying "the system cannot find the file specified," with only a single box for click that simply says "OK".  The installation went through 'examining installation options', after entering "check updates, download updates, install updates" and then it was all in "audit system", who jumped out of the window "file not found" upwards, and when I clicked 'OK', the installation window as well as the error message box simply disappeared.  Which I suppose is the path to the file is under the window, but it didn't fit so he showed not the end.  What I read was "C:\Users\... \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40...»

  I found a topic on the same printer model for the same problem in the forum, which offered this hotfix:

  You must first complete a level 3 of the software uninstallation. I've included the steps below to do this.
  
  1. press the Windows key and the letter R
  2. type %temp%, and then click OK
  3. open the 7z folder (a more recent if there are multiples)
  4 open the util folder
  5 open the folder of the ccc
  6. double-click on the Uninstall_L3
  
  Once you have completed the Uninstall_L3, delete all of the items listed in the temp folder. Note, you will not be able to remove all the elements, please ignore those that do not. Then please empty the trash and perform a clean boot. I've included the document «How to perform a boot in Windows» If your computer does not request it, restart your computer.
  
  Once your computer is back, you must reinstall the printer software. You can do this either by using the Setup CD, or by downloading the software.

  I did what was suggested, until he got to the point where it says it was the case recommend not removing any more items if I had intended on using the HP Officejet printer (Yes, I have a second HP printer connected to the network) anytime in the future.  Not really understand how it all works, I decided to stop what I was doing, so unfortunately it has not solved my problem.

  Do I need to uninstall both printers HP before I can reinstall a?  And if I do that, is there a reason that I wouldn't be able to reinstall the two printers?  Looks like I'm asking trouble.  Bottom line... I can not install the driver.

  I tried to install the full versions and the driver base and still get the same result.

  I have a HP Pavilion dv6 - 3100t for computer laptop, running Windows 7 Edition Premium, version 6.1.7601 family service pack 1 64-bit.  I have not installed new hardware or software.  This printer has always had a wireless connection.  The router I'm using is a Netgear 54Mbps WGR614 v6 (provided by my cable company) and the network includes not only my laptop and the Photosmart printer, but also desktop ASUS, HP printer, an Officejet 6300 series (used only for printing graphics and photos via a wired to the router) and a chip on Vizio TV.  I use Norton 360 first Edition and disabled the antivirus auto-protect when I downloaded and tried to install the driver.

  Help, please!  And thanks in advance for your time and your attention.

  Oh, Jamieson, it worked!  I can print again!  A massive amount of thanks and congratulations to you.

  I couldn't believe it when he actually passed the point where it normally would stop the installation, but then almost at the end, upward jumped «Fatal error during installation»  My excitement sank into a depression.  He said while the installation was not successful and he needed to collect information in order to diagnose the fault.  I looked at what has been collected, and it was more or less gobblety-* beep * for me.  There was a code of 19714722 error condition, if that means anything.

  Then he placed on my desk, the "Error of Installation HP - Windows 7.hta" file and instructed me to do away with the current window, restart, and then open the file and move forward with these guidelines.  I did and he basically had me to restart the computer once again, and then turn the printer off, unplug the printer, then unplug the router, wait 30 seconds and then plug the TAA - DAA and back in, I'm back in the business of printing.

  Thank you very much for your time and patience.

  All the best to you and yours!

• Model VeriStand compilation error: NEITHER VeriStand 2010 cannot find the struct parameter in CGTypes

  Hello

  I get this sequence of messages when I try to compile a model.

  ...

  # Generating API interface TLC.
  ...........................................................
  # NEITHER VeriStand 2010 modifying Pack_L500_IB_plant_fstep_io.c file
  ...................................
   
  # NEITHER VeriStand 2010 modifying Pack_L500_IB_plant_fstep_io_data.c file
  Error: # NOR VeriStand 2010 cannot find the struct parameter in CGTypes
   
   
  # NEITHER VeriStand 2010 modifying Pack_L500_IB_plant_fstep_io.h file

  # File Readme of Ports generating NI VeriStand 2010
  Could not find c:\WorkDir\Models\Pack\pack_l500_ib_plant_fstep_io_niVeriStand_rtw\*.obj
  # Time real workshop build procedure for model: 'Pack_L500_IB_plant_fstep_io' aborted due to an error.

  I tried to repair my VeriStand 2010 installation and always errors.

  I created a VM, installed Simulink and Veristand and tried to recompile the template. Error appers again.

  I changed the "target system" (tlc file) in general relativity, and the model has been compiled without errors. Same VxWorks Veristand target fails.

  If I copy the other target to target VS the second error le.obj goes but I always "error: # NI VeriStand 2010 unable to find parameter struct in CGTypes.

  How can I solve this problem?

  See you soon,.

  Claudio H.

  Hello

  I found the problem but not the reason.

  If I change the Settings of Configuration > Optimization > Parameters Inline unchecked = the template compiles without problems.

  See you soon,.

  Claudio H.

• Build error cannot find the distribution under construction

  I had a similar problem like this thread.

  http://forums.NI.com/T5/LabVIEW/build-error-can-t-find-distribution-being-built/TD-p/1462842/page/2

  My old guard Installer and ask for copy of the installation is finish. Quite annoying because it takes so long to get there. Any advice would be appreciated. I've attached a screenshot of my error message.

  You created this problem by running a build already install on your development computer. If you are distributing drivers with your installer you should NEVER run the installation program on the machine on which you build.

  Here's what happens:

  All software shops NOR where it was installed since in the Windows registry. When you initially installed it note where you install (DVD, network drive, etc.).

  When you build an installer in TestStand will prompt for this location if it cannot find the original installation files (that is, if you take the DVD from the drive disconnected from the PC from the network, etc.)

  What happened on this PC is you have to build a Setup program, and then you run this installer on the PC, and because the pilots were already present it replaced the path stored in the registry with the path where your Installer (e.g.) was C:\Temp\long path)

  I'm guessing that you have now deleted this former Installer. That means that you have to re - run installers for ALL the software to, OR that you have installed on this machine so the registry is updated to point to the path of DVD or the network path.