Equium M50 does not stop

Similar Questions

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  If Firefox detects that the places.sqlite database is corrupted then Firefox can create a new database file and import bookmarks from a JSON backup that does not contain the most recent bookmarks (a new JSON backup is created when you run Firefox for the first time on a day), then you may lose the bookmarks in such a case.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• My Satellite M50 does not start

  Hello

  All of a sudden my M50 does not start!
  He spends nothing; When I press the Start button, it flashes a few seconds and that s all! No noise, no BIOS!

  I already tried with the plug on the battery, but no change at all!

  I found a similar question on the forum, but could not understand what the problem was!

  Help, please

  ML

  Hello

  Have you tried to boot up your laptop by using only the AC adapter? Otherwise, please, remove the battery and plug the AC adapter / CC and try again. Please post what exactly happens when you try to do.

• Satellite A500D - fan does not stop

  Hello

  Two days ago I updated the Bios to version 1.20 win, and since then, the fan is constantly at 72% and the temperature of the CPU at 36 º.

  At Toshiba, I say it is normal, but the fan does not stop at any time and the noise is annoying.

  Anteriormento updated the BIOS, the fan stopped and started and never surpassed 54%.

  Looks like a vergueza by the care service, they have given me, I tried to deceive, as is normal for a portable fan that keeps 72%.

  Please I need someone to tell me where I can download before my Bios and how to install it.

  PS: My processor ens Turion Rm-77.

  A welcome message

  Hello

  You mean the cooling module fan didn't run all the time with the previous BIOS version?

  Well, in this case you must downgrade BIOS to the previous version.
  The problem is that you can download the latest version of the BIOS from the Toshiba page.

  But maybe a Toshiba ASP might help you and may downgrade the BIOS to the previous version

  But have you tried to change the settings in Win 7 power option?
  You can find it in the control panel-> power options

  There you can change modes of single power supply.
  In the power settings advanced, you'll find settings Toshiba energy saver and there you can change the method of cooling while the laptop is running on battery or power.

• Tecra M3-264: the fan does not stop

  Hello

  I have a labtop Toshiba Tecra M3 264, it's wonderful BUT,.
  The fan does not stop and this sound is a bit noisy in comparison with the other all I have.

  Is this normal in this model or should I take it to the service?

  Hello

  It is normal activity on new laptops cooling fan is very noticeable on older models. I recommend you to check what happen if you change the settings of cooling method in power management.

  By the way: allow the unit to take a breath. Make sure that the ventilation openings are free and that there is nothing that can stop the flow of air. If the vents are dirty and full of dust, it can also be responsible for cooling fans runs often and with a higher speed.

  Good bye

• Satellite M50 does not supply power to the top

  Hello

  My laptop Satellite M50 does not supply power to the top. The laptop itself is working fine, but I can't use it as the battery is discharged. I checked the cable ca and it seems ok. The laptop has a fuse internal which I need to check? If this is not the case, what should I do?

  Thank you.

  Hello

  If I understand you correctly you cannot use laptop with AC power only. Am I right about that?
  Switching between the block of AC power or the battery, do the power of electronic cards and there is not a switch so that you can check.

  When you connect your laptop to the power Jack is the power LED ON?

• E540: Fan does not stop

  Hello Board and support team!

  The fan in my e540 does not stop once it began to turn. It is completely independent of the system temperature. Even if the room temperature and the cpu is less than 40 * C the fan will not stop.

  The fan does not always turn, however. If I wake up the system from sleep mode or turn it on, the fan does not turn and will not start spinning until a certain threshold temperature is reached. This part of the fan control works correctly.

  Interesting procedure: I work until the heating system and the fan starts. I waint until the system is cooled below 40 * C (checked with software speccy, the flow of air leaving the laptop is cold). The fan is still running at this stage and will turn probably forever. I suspend the laptop (no full stop not required). I immediatally 'wake up' the laptop (temperature of the system has not changed, no time to cool). The fan is off again and will not start turning until the temperature threshold is reached.

  What can I do to fix this? I don't always want to suspend my laptop to turn off the fan. She has to stop on its own.

  
  

• S440/Win10 - does not stop correctly

  Hello

  I have upgraded to windows 10 recently. After the upgrade, sometimes, the laptop does not stopped correctly - windows stops, the screen goes black, but thinkpad red LED remains flashing and I hear the fans still doesn't work. To really stop I have to press and hold the power button. The battery also is to be served, because after that I left it like that night, it was gone.

  Now, it's a little weird because it isn't always happens. It only seems to happen after that the laptop has been for a while. If I had to bet, it would be related to switchable graphics as the behavior resembles the problem with graphics terribly switchable and sleep on win8.1.

  To work around this problem, I took to restart the computer and stop just after shot, but Needless to say it is suboptimal.

  Anyone has any ideas on how to fix it?

  I think I found a solution. I have seen this mentioned in other forums of laptop, and it seems to have fixed for me.

  The culprit seems to be this driver:

  Intel(r) Management Engine Interface Driver for Windows 10 (version 11)

  If you install the earlier (version 9, should be on the lenovo driver page) it solves problems of stop/standby.

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...

• Called vi with one hand, it does not stop

  Hi all

  I try to call a vi of a principal, I have succedded to call the vi but I couldn't stop the main vi and the called vi does not stop and disappear. Where I did wrong?

  LabVIEW follows a model of data flow for execution of vis a block diagram node runs when it receives all the required inputs. When a node is running, it produces output data and transmits data to the next node in the path of the data stream. The flow of data on the nodes determines the order of execution of the VIs and functions on the block diagram. Source

  Once you have called your Subvi, your main VI is pending so that it ends before it can move to the next State in the state machine which is the reason why it will not stop.  If you want to run a separate VI, you can call an asynchronous mode

• HELP - read file that VI does not stop at the end of the WAV file

  Hello

  I am a beginner and I'm working on a project that opens a .wav file and it plays (with volume control). I found all the associated examples sounds extremely useful and I can just edit the audio file to output.vi his example to my project.

  I'm running into a problem where the vi does not stop at the end of the wav file, and it seems for a while loop. the wav file I am using ended a long min (and it has been converted to a data file in a wav file, if it matters). I have attached my vi modified here and appreciate any help.

  Thank you!

  Christy

  The OP and the æ OR

  Please go to help on the toolbar. Then select examples and search for sound. Locate the sound file "for his Output.vi.

• Simulation does not stop in the Loop Simulation & control

  I'm working on a settlement in a loop of control & Simulation. I created a State space model and an inside observer.

  Now, I've implemented nearlly all, but now the simulation does not stop.

  First here is a picture of the .vi when it still works:

  

  But this isn't the end result, I want to have.

  I want to connect the output of the subtrahation (2 x - y) at the entrance to the exterior product.

  You can see from the image below:

  

  If I do, my continious simulation and never stops. The simulation time is always set to 10 sec.

  The .vi is attached. I hope someone can help me.

  I don't understand your suggestion. I've set up a node of your comments, but this does not solve the problem.

  But I found another solution to the problem. I build the .vi completely new and used the arithmetic of the design group Signal and control Simulation. The gain block and the summation block works better in my case that digital add and multiply the blocks. Now, the tracks of the simulation and the regulation works well.

• Why the STOP button does not stop this vi?

  Hello

  I took an example of Labview 2011 called "soul hollow period-Low Freq 1 Ctr.vi. This example vi measures one period, but, I want to measure the period over and over again, so I put it in a WHILE loop, but the STOP button does not stop at the vi.  Instead, I have to use ABORT to stop the vi...

  How can I stop this vi?

  Dave

  It does not replace the time-out.  The while loop is a separate beast from the meter reading.  You wouldn't want your loop due to always make you miss the error messages, would you?

  Usually just clear the error message of time-out on the counters.

  You get the message twice because the loop runs in fact twice.  The first time the stop button is read as false as soon as the loop begins.  Then you click on it.  At the same time that it takes 10 seconds for the timeout counter to occur - when he does it gives you the error.  Then, the loop runs again.  This time it reads the key stop as true, because you clicked on it during the timeout of 10 seconds of the last loop.

  A time loop allows everything inside to complete execution before the end, then you will have to wait for an another timeout of 10 seconds to occur which produces another error.

  Unless you need a measure of very, very low frequencies I set your time-out to a more reasonable number and simply erase the mistake if it matches 200474.

• win xp sp2 does not stop

  I have a laptop running win xp sp2 - for 6 years never had a problem - have avg 2012 and recently did avg can - but the computer does not stop and I didn't hold down the Start button - what is sp2 that is the problem? -If so, how do I get/install sp3? I'm not a whiz hardward.

  Did you go to the Microsoft Update site? SP3 should be available and should have offered for a long time if you are automatic updates.

  http://www.update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us