Equium M50: DVD works but no video image

Similar Questions

• DVD works but will not play a CD - Vista

  I tried to remove the filters from the registry.  I have download all the drivers from Dell.  It used to work, but I haven't used in a while.  I put a DVD in the drive and it loads immediately.  For a while when I clicked on the drive, he asked for a CD.  However in the last couple, the icon changes as he sees a Cd in the drive but cannot read.  It shows 0 files it contains.  When I put a CD I had burned some time ago, it shows how much free space on it, but does not display the files it contains.  I tried music, games, and files.  Any ideas short of wiping the entire computer and start over?

  Hello

  DVD player & recorder and CD player & burner are really 4 separate devices in one case is not
  unusual for a work and not the other.

  Please do all the below in the order listed as it is often the complete process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Equium M50-164 slow but system recovery lost disk

  My laptop is an Equium M50-164
  I lost my recovery disc and now my computer is slow and there is different error popping up all the time.

  As I m not that smart with computer, I would like to do a system recovery and start again someone can help?

  Please

  You can tow:
  Either you will have an original CD of Microsoft Windows and will reinstall the OS. Then, you could install the drivers of Toshiba which you can download from the European pilot of Toshiba site or you order the local ASP (certified partner) Toshiba Recovery CD

  It of your choice now

• AOL mail works, but aol videos don't. also, aol remains on page 1 of the news of the day. arrows do not work.

  AOL opens as usual, but I can't move from page 1 of the news of the day. The arrows do not work and bar upstairs says: aol.com / #. AOL videos go to "connection.", but do not play. My AOL e-mail account works fine. He has no problem with AOL using IE.

  Problems started 2 days ago. I'm a kind of low-tech, but have you tried various fixes suggested in the help section. Currently using Firefox 9.0.1 with plug-ins Adobe and Silverlight. No add-on. No change known (to me) 2 days ago that could have caused this. What is the solution? Please notify.

  You are welcome

  Alternatively, you can try to clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• Connected, the browser works, but not video games online?

  My wireless inter worked very well for a time long, and all of a sudden, today, said internet 'Connected', but the browser could not work and open all the pages. But a few hours laters, when I turned my computer back, the browser works, except that this time, I can't play any vdeo games online, when I try all say fail to connect, or maybe it's go to the maintenance section, but I'm sure that isn't the cause of all my friends play This happens with ALL my games online! Help, please! I need to wait a little longer horus and things will be back? I have no idea how he got started, oh more internet on the laptop, a different computer, wasn't workign when it wasn't too, except now its fixed and it can be played games on it, but my office cannot! Help, please!

  Hello

  If you use Mozilla Firefox, then I suggest you to post the question in the forums and check them off below if it helps:

  http://support.Mozilla.com/en-us/KB/Firefox%20crashes/discuss

  It will be useful.

• Windows Media Player sound works, but not video

  I recently had to restore my laptop to an earlier version, because it wouldn't start properly. Now when I try to open the video files from an SD card in Windows Movie Maker, the thumbnail will be clearly visible when I click i to watch the entire video, I get is sound and a black screen. I ran the Fix It Microsoft program and he told me that I have to buy a DVD decoder. This in fact is what I do please help before my laptop ends in two pieces!

  You import video files from the SD card
  map in Movie Maker for editing purposes?

  Have you tried to copy the video files to a
  folder on your hard drive?

  What is the format of the video files?

  What version of Movie Maker are you running?

• Equium M50 does not stop

  I'm having this problem with my equium M50, it works fine, but when it comes to paralyze the system, the system seems to close as requested, but as soon as the system is turned off, it immediately starts up again!

  The same thing happens when I want to put the laptop into hibernation, the system hybernates ok, but once it does, it starts again!

  the same thing happens when I'm out of windows, press the power button, the system stops and then starts upward.

  Help, please.

  Thank you.

  Hello

  It's strange
  I recommend you to unplug the AC adapter and remove the battery.
  Then wait for 1 hour and then reconnect battery and AC adapter.
  Turn on the device and check how it works

• Mobile side.  Using the drop down of your video.  I once put some text on the Mobile page the Menu drops down, but behind the image.  When I remove the text box the menu works correctly.  This also happens with a HTML code placed to Paypal.

  Mobile side.  Using the drop down of your video.  I once put some text on the Mobile page the Menu drops down, but behind the image.  When I remove the text box the menu works correctly.  This also happens with a HTML code placed to Paypal.

  Please check layers panel and put in place the menu item in the list, you can use the layers panel and move up or attempt to move the content.

  If there is still the same, then download a few screenshots of the design view.

  Thank you

  Sanjit

• How to delete the history of google, tried to delete the browsing history, that works, but it does not delete the site from google (in the middle of the page next to the images and videos

  How to delete the history in the Google search box in the middle of the page under Web new video Images

  http://www.Google.com/support/WebSearch/bin/answer.py?hl=en&answer=465

  See if help above.

  See you soon.

  Mick Murphy - Microsoft partner

• My DVD works on our television screens, but not on some of our friends in televisions

  My DVD works on our television screens, but not on some of our friends television screens.
  He plays a photo then restarts and then plays two photos then restarts then plays three photos then restart etc etc..
  What is a parameter when creating the video to digital photos or a parameter on television of our friends?

  It has nothing to do with the connected TV!
  It s is the DVD drive!

  Some players can't handle all CD or DVD! Which is one reason why the created image DVD does not work with the friend (s) disk drive.

  You will need to test various DVDs of different drive manufacturers. Some discs are more compatible as other drives

• ODD on Equium M50 is not working properly

  Hello

  Im having "problems" with reading DVD and CD on the DVD/CD drive internal on my Equium M50-192
  During playback of the DVD images stutter and the audio is slightly out of synchronization with the video. During playback of the CD, it is slowly changing.

  Have you tried different actors (Nero, Intervideo etc.) and all seem the same.
  Have also tried an external drive and it seems to solve the problem for 99% of the time with the DVD (always get the occasional stutter) and CD plays OK.

  Anyone have any ideas?

  Thank you.

  Hello

  Looks like your ODD has a hardware problem that must be fixed by a technician from toshiba which means you need to bring your machine to an authorized service partner.

  Then I suggest you visit the following link:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Choose your ASP which is nearest in your area and then let do them the rest.

  Welcome them

• Equium M50-192 DVD & cd Format questions

  I have an EQUIUM M50 192 with program DVD + rewritable, but when dounlowding photos from the computer on a DVD in order for playback on other media, it won't work

  WHY?

  Hi Mich

  It's not easy to say why it doesn t work. I put t know what program brining you use and what DVD media you are using but it possible s that your use not taken in charge that the media or that you have not closed the session of engraving, etc.

  As you can see, there are many possibilities. I use the Nero burning rom software for burning CDs and DVDs. I also created a photo DVD to watch on the TV and it works perfectly.
  You should test this program. Maybe you're successfully.

• Equium M50 - roll trackpad not working after installing Vista

  After installation of Vista Edition full scrolling on my trackpad seems to not work. Is it possible to fix this?

  Suggestions apprieciated.

  Hello

  AFAIK Equium M50 (PSM53) will be supported for Vista, but obviously the drivers aren't ready to download. Try to find the ALPS driver somewhere on the Internet.

  Maybe something like THIS

  I have not tested and I don't know if this work, but you can test it. Please let us know how it works.

• Dvd drive saying Equium M50 D:\ is not accessible

  My reader DVD of Equium M50 says that the D:\ is not accessible. The request could not be completed because of an error to design i/o. What is it and what can be done for sorting?

  Hello

  Try to remove the Device Manager CD/DVD drive.
  Restart the unit.
  After that procedure, the operating system should recognize the drive again.
  Check if the drive works properly.

• Equium M50: No icon of CD/DVD drive in "my computer".

  Hi all

  I use an equium m50 and I encountered a problem.
  There is no CD in cd/dvd drive icon in the section 'my computer '. I have installed a cd burning software and burned a cd, shortly after the CD-ROM icon disappeared. I've removed the device using Device Manager, and then installed the driver of device again. He said, the drivers have been installed successfully, but cannot find the hardware.

  Also, I get this message now when I click on properties of cd/dvd rom in Device Manager "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "now that I can't use a cd, the possibility of reinstalling the operating system is also excluded. can someone help me with the problem im facing?

  Thanks in advance
  Kiran

  Hello

  You can t see the drive in the my computer because the registry entries are damage. Well, I put t know all other possibilities to fix these entries outside the new installation of the operating system with the recovery CD or / and to use the Windows XP System Restore tool.

  Well, I think you should try these options.

  Good bye