Equium P200 - DVD drive reads all discs

Similar Questions

• CD/dvd drive reads all discs

  I have Dell inspiron 6000 with windows XP home. My Cd/DVD drive was working fine. Able to play any disc. Now, recently, he stopped recognizising all disks. I tried to get back the driver, updating the driver, uninstalling the driver and reload the driver, without success. I remember, previously, that I had similar problem a few years back when I downloaded the SP3 and microsft corrected using my computer remotely. I don't know what they were doing. But again today same problem. Microsoft will not help as they say now want to pay now. Could you help to get my cd/dvd drive works again. Thank you

  Most likely the drive failed / dies and must be replaced.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• CD/DVD drive reads all formats of DVD and regions

  Hello
  My Teac-dw-224th-a bed not all formats DVD and regions.
  It reads CD but not DVD at all.
  No DVD - R and DVD not yet regular. I checked the DVD region.
  I reinstalled the driver and also tried with different software.
  What can I do?
  Help, please!

  Hello

  It is possible that your DVD drive incorrect region settings.
  In this case, it is not able to watch all possible movies to DVD from different regions.
  Of course, you can change the settings for 4 times. But after this change, the parameters have been set and it is not possible to change more.

• My DVD drive reads the disc.

  My bed DVD player is no longer the disc I insert and when I Explorer, it looks like this;

  http://S22.postimg.org/5ggim2xy9/capture.jpg

  How should I do?

  Hello

  Thanks for the reply.

  There are various reasons why a CD or DVD drive is not detected. The resolutions that are listed in this article can help in some cases but not all instances of this problem.

  Perform the steps mentioned in the article and check the results after each step.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060/en-AU

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/en-us

  Hope this information helps. Response with status so that we can help you.

• my dvd player reads all movies what do I do to get it working.

  my dvd player reads all movies what do I do to get it working.

  I had this happen to my DVD player recently.  The problem was that the disc I was trying to see it used a copy protection system is not yet implemented by my DVD player.  Normally, I don't have the DVD player connected to the network, so he had not received the updates of the firmware since I bought the player.  After that I connected it, you download an update of the firmware and I could see the movie.

  My recommendation to you is to see if the manufacturer of the DVD drive has an update of the firmware of your player on the website of the company and, if so, has it, then test again.

• My CD Rom won't read all disc types

  My CD Rom won't read all disc types.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Equium A110-233 drive reads not not drives - error code 39

  Drive not reading all discs.
  Something to do with the driver. Far as I can tell it says error code 39.

  Hello

  Please try the first method:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;320553

  You will find a link to the MS site that provides a nice solution.

• Satellite - CD/DVD drive reads only CD

  I'm abit confused in this situation. My CD/DVD drive reads CDs but does not read the DVD. I don't know if I have to reinstall the driver for the CD/DVD or should be replaced.

  Please can someone help.

  Hello!

  There is no special driver first of all for the CD/DVD drive. The pilot is part of the operating system and should be updated or exchanged.

  I also put t know why the drive isn't reading DVD s more but have you tried to clean the lens of the drive? Therefore, you must use a microfibre cloth than zero of the lens doesn t and be careful!

  In addition, you can boot from a CD?

  Good bye

• CD/dvd drive read only disks not vain iv tried everthing I can think of an infusion iv, any help appreciated, thanks lee.

  CD/dvd drive read only disks not vain iv tried everthing I can think of an infusion iv, any help appreciated, thanks lee.

  Hi leejarvis,.

  ·         What version of the operating system is installed on the computer?

  ·         What is the brand and model of the computer?

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         Have what troubleshooting measures you tried?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• Satellite L755-1N6 CD/DVD drive reads scans to disk but no disc inserted

  Hi all!

  Yesterday, I bought a brand new Satellite L755-1N6 and I must say that I am very satisfied with this product.
  Of course, except one thing...

  For some reason any my Player CD OFTEN reads/scans / searches (?) for CD/DVD even if no disc is inside! It's large notebook, but frequent ringing of CD drive is very very annoying and it is not normal.

  He's trying to 'read cd' for approximately every 5 minutes (give or take a few minutes). I'm using Windows 7 Ultimate 64 bit. If please, if anyone has experienced this problem and do you know what this is all about?

  BTW I have disabled Autoplay setting, although I think that it doesn't matter anyway.
  It happened at least twice while I was writing this post...

  Hello

  Have you noticed some click sound coming from the CD/DVD drive?
  I found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64919

  It is very similar to that described in your thread.
  Disable the + Toshiba PC Health Monitor + in msconfig Startup tab and restart the device.
  Then test if the sound has disappeared.

• Hard drive on my computer has stopped reading all discs.

  Original title: cd driver problem

  We have windows vista, the hard drive works at all. We have tried to re install from windows thwe site, he says that we already had the best driver. What can we do?

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• CD/dvd drive read only not all disks

  When I put a disc in the drive says that there is no disk in it
  I've uninstalled and restarted the computer, and used the program fix
  and the computer says that it works correctly

  as I looked to filter things and he's not here

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  If necessary:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• CD/DVD drive read only not the discs in Vista

  My CD/DVD read more records. I put in a disc and it does not detect either he (it's as if I was never to put a), or it takes forever to load. Also, I can't read game discs so I can't play my games. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• ONCE 1 DISC CD/DVD PLAYER READS ALL THE OTHERS LIKE WHITE

  has got an acer 5315 laptop filth single bed 1 disk. reads all the other virgins or be reformatted, I'm puzzled... any advice would be greatly appreciated.                am running vista Home Basic edition if it helps

  Hi Ronwaddilove,

  1. are you able to play these discs on another computer. ?

  You can read the following article and try to run the Fixit and see if it helps.

  Your CD or DVD drive cannot read or write media

  Hope this information is useful.

• CD rw-cd rom drive... not reading all discs.

  OK, so I bought a studio of dell in January. 2009... it came with a regular training who rewrote the CD and reads the DVD.  and a blue ray player.  My Blue Ray works for everything, including burning cds\dvds.  the standard drive reads cds and dvds but not CDs software, also would not read any kind of cd serious if it had music, photos, video, or software. After one of three days he would have completely read only new music CD. I didn't care to send the com for a new cdrom drive and they would eventually wipe my drive which I had installed new programs. which allow only install once. so I stopped completely to help this drive after unsuccessfully for the dell Diagnostics Web page. now im wondering if I should just replace the drive of CD-ROM. my com. said very well his work through all the tests of systems etc... Thank you

  Hello

  1. are you able to use these discs without any problem on the other computer?

  2 have. what troubleshooting steps you tried?

  I suggest you try the procedure below.

  Step 1: If you have not tried runningAutomated Troubleshooting Services, then, please try it.

  Reference:http://support.microsoft.com/gp/hardware_device_problems

  Step 2: Remove upper and lower filters.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  To resolve this problem, remove the affected filter drivers. To do this, follow these steps:

  a. click onstart toreduce this includes this image, typeregedit in the Search box, and then clickregedit in the list ofprograms .

  Collapse this includes this imageIf you are prompted for an administrator password or a confirmation, type your password or clickcontinue.

  b. look for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Warning There may be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.

  c. in the pane, clickUpperFiltersand then clickRemove.

  d. click onYes to confirm the deletion of the UpperFilters registry entry.

  e. in the pane, clickLowerFilters, and then clickRemove.

  f. clickYes to confirm the deletion of the LowerFilters registry entry.

  g. out of the Publisher of the registry, and then restart the computer.

  Note After the removal of the UpperFilters registry entry and the LowerFilters registry entry, you may lose functionality in certain programs such as CD recording programs. In this scenario, you must reinstall all of the programs involved. If the problem persists, contact the program vendor to determine if an update is available for the program.

  Step 4: Update the driver.

  Steps to update the driver:

  a. Click Start, typedevmgmt.msc and press to enter.

  b. expand the CD/DVD and right click on the sub element and click onUpdate driver.

  If that fails, then try to reinstall the CD/DVD driver

  i. click onStart, type devmgmt.msc and then on enter.

  II. expand driver CD/DVD and do a right-click on the sub item and clickUninstall.

  III. to restart the computer.

  IV. visit the manufacturer's Web site to download the latest version of the driver.

  v. install the driver, and then restart the computer so that the changes take effect.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Also have a look at the article below.

  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=346785

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD
  http://support.Microsoft.com/kb/952951

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]