Equium P200 - video cable

Similar Questions

• Equium P200 1ir - where can I buy cable LCD screen

  Hi all

  I have an Equium P200 1ir and my screen has been crazy, color errors everywhere.
  I followed the problem down to be a cut wire in the cable of the internal lcd screen.

  My question is: where can I buy a cable lcd screen replacement for this machine that the screen itself is fine.

  I have searched all over the web and have had no joy. If possible can someone Toshiba advise me to buy the lead...

  Thanks in advance

  Antony

  Hello

  All laptop parts can be ordered from a local Toshiba authorized service provider.
  The ASP in your country should be able to help
  If these cables is not available or not on stock, then guys would be able to order this Toshiba head stock

  Have a look here to find all of the ASP in the world:
  http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

• Equium P200-1ED - cannot find video controller VGA Compatible

  Hello
  I can't find video controller VGA Compatible
  In the main support center, I could not find this driver.

  Some1 can send me link or something.
  Thank you

  Equium P200-1ED

  > were also unable to find the driver, even using your valuable comments and link
  It's strange. I found the display driver for Equium M40x in just one minute.
  Sorry but where you found these useful comments?

  If you want drivers for your laptop satellite, just visit the page download Toshiba and under product type choose the option ARCHIVE. All that s!

• Equium P200 power up used

  Hi Please help.

  I have a notebook Equium P200, which was good, but now used to power up if I connect the power cable, the AC flashes blue (not solid as usual). No battery but still no power light light I checked the power supply cable and it seems ok.

  Hello!

  It looks like a hardware problem. You should try this workaround:
  Remove the battery and the AC adapter. Then wait one hour. Then reconnect both devices and try to restart the laptop.

  If it doesn't work your laptop must be checked to an authorized service provider. On the Toshiba site, you can search for nearest.

  Good bye

• Equium P200-1IR - wireless is connected but cannot access the internet

  Hi there,

  Need a little help!

  I just bought an Equium P200 1IR.
  I activated the wi fi.
  I see my router which is Talk Talk.
  Can I get the laptop to connect to the router and it says I'm connected,
  However I can't access the internet.

  I tried the same process by inserting a WiFi dongle into the USB port
  on the laptop, and exactly the same thing happens.
  We have other home computers that connect to the router and the internet
  OK using the wireless dongle.
  I plugged a rigid cable between the laptop and the router connection and I can't
  access the internet immediately without any problem, however, would be delighted
  to use the wireless function.

  Any help really appreciated... Thank you

  Waynec

  Hello

  Try please reboot your router. A few weeks ago, I had a similar problem with my Satellite A300. WLAN is connected but Internet was not available. After the router is restarted all of a sudden everything was ok again.

• Equium P200-1ed - card Atheros WLan does not pick up all networks

  OK about amonth and a half there is weupgraded of Windows Vista to Windows 7, 32-bit Home Premium.
  Everything worked without problem (yes I know with access)

  Then suddenly at 01:00 today, Internet went on the Toshiba laptop and we can't put it back on. I tried the new drivers and nothing, try the keys FN and nothing turned also out of the card wireless forward and turn it back on. The laptop is the map reckonising, becausewhen I uninstll the driver picks it up. So I'm so confused as to what it can be.

  Girlfriend wason Facebook at the time. I scanned Virus, Anti-spyware, scanned and cleaned C islet still nothing. So I checked online to find loads have had the same problem, but no one seems to post the answer. Could someone please help.

  Laptop is Toshiba Equium p200-1ed, Intel P Dual Core CPU T2310 1.46GHz 2 GB of Ram. Running Windows 7.
  The problem is with the wireless adapter - Atheros AR5007EG Wireless Network Adapter

  As I say, works fine, then suddenly do not pick up all networks. My other computer laptop of them is recovering fine. Running the computer on the Ethernet cable. Just not the wireless. He does not know the wireless card is there, it is like its just abandoned, but if a lot of people have problems with Atheros adapters in windows 7. Can someone please.

  David

  Hey dude!
  Thanks for sharing this with us! Could be useful for other people who have discovered the same question

  Welcome them

• Message to "Check video cable" HP 2311 X

  HP,

  I have a HP 2311 x which was bought in end Nov 11.  I used it with my custom computer Pro Windows 7 64 bit on a GTX 460 graphics card via DVI.  Friday I started to get the message to check the video cable to a black screen and then the screen to standby.  When the monitor made its start sequence DVI input is recognized as active, but I still receive the message check the video cable.  Here are some of the things I've done:

  I changed video DVI cables-unchanged

  I tried to manually select the input DVI - no change

  Used the second my unchanged video card DVI connection

  Used my GTX 460 and DVI cable on another monitor-everything worked well

  Plugged the cable well checked the HP 2311 x - no change

  Used a VGA output, a 2nd video legacy card(Radeon X1550)-monitor has worked with a slight distortion

  Used output DVI check video cable Radeon X 1550 - received message

  Used of an Asus Eee PC monitor VGA output worked without any problem

  I have not tried HDMI, or I want to use the HDMI.  If the monitor has been done to DVI it should work.  Any help would be appreciated.  I've seen other threads with a similar problem, but they were not using the HDMI DVI input.

  Jason

  Hello

  Only fix an active video cable to the monitor.

  Try a reset of the monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up. Now restore the Source entry in the menu of the DVI monitor.

  Try the monitor on another PC via DVI.

• Compatibility with Equium P200 RAM

  Hello

  Is PC2 - 6400 S-666-12-1E with Equium P200-1ED compatible?
  I don't know that I asked before I bought it, but now it does not start. So I want to know if it is because they are defective or got bad advice.

  Thank you

  H Jacke

  It is not easy to give you the right answer because Toshiba offers info on the RAM modules tested only.
  What I found in the specification is information that your machine can be upgraded up to 2 GB of RAM and the compatible RAM modules are:
  1 GB-DDR2-667-PA3512U-1M1G > Kinston KTT667D2 / 1 G
  2 GB DDR2-667-PA3513U-1M2G
  512 MB DDR2-667-PA3511U - 1 M 51

  Unfortunately there is no information about the other brands. You can buy it and test it. If there is a compatibility issue just return it.

• Processor upgrade and Equium P200-1ED

  Hello

  I installed an SSD of 64Go and installed Windows 7 with the user and the data folders program on a SD card installed as USB key into the Expresscard slot. I also put in 4 GB RAM

  It is still slow to navigate the Web through wired Ethernet. So I plan to upgrade the processors as the neck of the bottle seems to be permanently on the processor which is a T2310 Dual Intel @1.46 GHz.

  So the question is what is the next possible CPU upgrade?

  Thank you

  Update CPU has no influence on the Internet.
  It's done.
  If you have a slow internet connection, check the flow of data to your internet provider.

  Regarding the upgrade of CPU:

  Upgrading the CPU is certainly not supported by the laptop manufacturers. But this does not mean that another CPU would not work. A lot of people here in the forum attempted to upgrade the processor and in some cases, it worked.
  It will be important to know which chipset was built in this Equium P200-1ED.

  I m not very well, but I guess that its Intel GL960 Express Chipset. Please correct me if I m wrong the chipset must support the new CPU, otherwise the new processor cannot be used.

  Page Intel ARK provide information on supported processors
  http://Ark.Intel.com/products/29830

  In addition the new processor must be supported by the BIOS. If the BIOS would not support new CPU, the laptop would not start even if the chipset would be compatible with the new processor.

  As you can see, the CPU upgrade isn't easy because of pending issues concerning the compatibility issues between different parts for laptop.

  By the way: I am wondering about the upgrade to 4 GB RAM because this device should support max 2 GB of RAM

• Video cable LCD BLI for Toshiba Satellite S50t-B

  Hello

  We have laptop Toshiba Satellite S50t-B, what LCD video cable will fit this laptop?

  the cable was written on it the following:
  BLI LCD CABLE
  DD0BLILC020
  140409 JHI
  REV:3 HAS
  (you can take a look at the photos too).

  Please let me know if the two versions (DD0BLILC000 and DD0BLILC020) will be adapted to the laptop S50t-B. If there is another replacement that I can use, please let me know.

  Thank you. Mile

  It is not easy to help you with this. These lists of spare parts are not public documents and it is difficult to find info on this subject.
  You can try to contact Toshiba service provider and ask for help.

• Re: Equium P200 close issue with Vista SP1

  My Equium P200 seems to have developed a problem when stopping down.

  If I select 'Shut Down' option in the Shut Down menu then all revenues, but while the laptop restarts itself and there will be a 'blue screen of death' teling me he does a memory dump physical.

  When it is complete Notepad starts and there is a message saying that Windows (Vista SP1) has recovered from a serious problem.

  Any ideas on how to fix?

  Thank you

  AFAIK SP1 could create serious problems because of the problems of compatibility between some drivers and tools.

  Have you noticed the same issue without SP1 installed?

  I think you should check this!

• Portege R100 video cable does not reach the replacement LCD screen

  Hi guys, I have replaced the LCD screen of my Toshiba R100, than they had in it was defective. It seemed that it was a replacement at some point however. In any case, I received my new screen, but does not reach the video cable to the top of the circuit of LCD screens. How am I meant to connect it to the screen? Is there an extension cable or what? The screen they had in there previously looked like they were welded copper wires about 8 digitizer.

  Here are 2 pictures of what I mean

  

  

  Hello

  Where did you buy this screen?
  Are you sure that it is perfectly compatible with your laptop protected R100 to 100%?

  Looks like it s not fully compatible
  However, if an extra cable is necessary you can get it from the Toshiba ASP in your country.

  In your case, I recommend you contact the guy and ask for compatible cable!

  Welcome them

• Equium P200 with WXP, no ACPI

  Hello

  I recently bought a new HARD drive to replace the Vista operating system.

  I used nlite to make an iso of the drivers SATA, SP2, and XP Home.
  I installed XP, SP3 and then all the drivers concerned from Toshiba. Especially the PC is fine, but I have a couple questions.

  They are:
  1 button will turn PC on or off, but not shut down the OS before turning off.
  2. when I stop XP I get the message (Win98), "it is now turn off your computer"! (Both of these may be (?) related).
  3. in eating patterns Options\Power I have only the possibility of the turn the HARD drive and monitor and then in the Advanced tab at all no options!
  4. with the exception of point 1 I have no control of the any of the other easy access above the function keys buttons. Toshiba controls are configured but do nothing!

  I studied these problems and it would seem that the APCI perhaps the corupt? I can't find any mention of ACPI in the BIOS (Phoenix V2.3). Also, I can't find any reference to ACPI in including hidden devices Device Manager! It was also suggested to upgrade the BIOS to ACPI compatible version?

  The only clues I can give, is that even if the pilot pwrsav the pwrsav driver installed OK - in twice caused a fatal error (BSOD) on the PC. To restart, as Toshiba Power Saver icon in Control Panel, but the opening gave me a Fatal Exception error message. I then restored the system to remove the program.
  In my opinion that ACPI and energy savings are related, please inform me if I am wrong. (Items 1 to 4 can all be linked)?

  XP has apparently ACPI capabilities but I can't find anything on the PC in this regard.
  With Vista that I had no problem with mentioned previously not mentioned and everything worked perfectly.
  Your help would be much appreciated...

  Hello

  It seems that the Toshiba UE driver page provide a special Win XP BIOS version 5.40 for Equium P200.
  If you are using Win XP, its recommended to use this BIOS.

  In addition, the page provides the pilot Power Saver Power Saver utility for Win XP.
  You must install both have additional food options.

  The commands and controls driver must be installed so that the functionality of the multimedia buttons.
  Hotkey Utility for Win XP manages the FN keys.

• Equium P200-1ED is capable of powering connected on USB devices?

  (1) possibly associated with my previous question - what is someone able to confirm if the Toshiba Equium P200-1ED is able to power external devices connected via its USB ports?

  (2) all 6 USB ports can supply simultaneously 6 external USB devices?

  What's wrong?

  Please notify.

  I assume you ask again for advice related to this issue:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=115026#115026

  To my knowledge, all USB ports supports the USB standard and provides 500mA.
  But sometimes a USB device requires more than 500 my and then you will have to use an external power supply for the USB device.

  Sometimes it s advisable to use a USB hub that supports clean power.

  (2) can all be used 6 USB ports to power simultaneously 6 external USB devices?
  As I said, the external USB devices possibly some 3rd would need more like 500mA and in this case, you must use an external power supply to USB devices.

  Good bye

• Equium P200-1ED is able to power external USB devices connected on it?

  (1) is anyone able to confirm if the Toshiba Equium P200-1ED is capable of powering an external USB device connected to it via one of its 6 USB ports?

  (2) what is the maximum power that the Toshiba Equium P200-1ED can provide only one USB port?

  (3) can the Toshiba Equium P200-1ED providing the power referred to in Question (2) above to each of its 6 USB ports?

  Please don t after several markets on the same subject.
  After you recommend first one:

  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=115025#115025