Equium P300-16 t: a few issues after upgrade to Win 7

Hello

I just moved my Equium P300 16 t from Vista to Windows 7 and everything seems to be fine. At least, everything works.

Before the upgrade, I downloaded some Win7 drivers, and other files (things like Config fr.;) Hardware configuration; Card reader controller supervisor password utility. TEMPRO and others)
Device Manager shows no problems I have to install one of these elements.

I think that if it is not broken, do not fix. But I'm not sure about these.

Another thing, after a series of updates from Windows, I lost the Windows event sounds.
They work when tested, but not in use.

All other works of his property, and that's the only driver Toshiba I installed where he fixed, but not good.

Very grateful for any advice

Thank you

> I believe very much that if it is not broken, do not fix. But I'm not sure about these.
If there is no yellow exclamation point and no unknown devices are visible, this means that you have installed all necessary drivers for don t be worried

> Another thing, after a series of updates from Windows, I lost the Windows event sounds.
Well, are the different selected sound for unique events? Or maybe that sounds have been cancelled? This should be checked

> All other works of his property, and that's the only driver Toshiba I installed where he fixed, but not good.
Well, you can also try to update the audio driver
The laptop seems to support the audio chip Conexant CX20561 you can search for updates on the internet, but to be honest, if the sound works fine (except for the event sounds) so I wouldn't change anything personally I disabled all the sounds of the event on my laptop because I don t like this

Tags: Toshiba

Similar Questions

  • Satellite L755-M1M3 driver sound problem after upgrade to win 10

    Salvation;
    I have problem with audio driver Toshiba Satellite L755-M1M3 after upgrade to win 10, the sound does not normally work in YouTube or Facebook even when I play the video files from my computer it is dug into the sound or noise goes, I update the driver but not help, can you help me please, I have Toshiba backup files how can I restore it?

    Inability of Toshiba to make the solution, always shocks me. !!! ???

  • Latitude E5520 Audio problems after upgrade to win 10

    I have audio problems after upgrade to win 10 64-bit.

    Dell Latitude E5520 IDT 92HDxxx HD Audio
    Hardware ID:
    HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A & REV_1001
    HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A

    (1) if I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

    (2) if I use the latest Dell driver (IDT 92HDxxx HD Audio Driver) I hear initially via speakers, but as soon as I plug in headphones I can't switch back to the speakers (i.e. switching between the speakers and the headphones does not work) and my laptop computer microphone works.

    I would be happy to provide more information and help to debug.

    To a Microsoft Community Forum, I received the following reply from Rob Brown - Microsoft MVP:

    *************************************************************************
    Hello
    AS OEM Dell is responsible for the good operation of the equipment both
    and Windows. Check their documentation online with Dell Support, and
    drivers and ask questions in the forums about known problems. Make sure that you are
    Run the latest version of the BIOS, chipset and drivers.
    I hope this helps.
    *************************************************************************

    I understand that the Latitude E5520 does not appear on the Dell "Computers tested for upgrade to Windows 10" list... However I was hoping maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

    Thank you
    John D.

    johnsdagg
    AS OEM Dell is responsible for the good operation of the equipment both
    and Windows.

    Hi, John. It's quite nervous of a member of the MS forum say that Dell is responsible to operate Windows. It wasn't Dell but MS who claims that Win10 has most of the necessary drivers and if not then the drivers Win7 and Win8.1 would work.

    johnsdagg
    I was hoping that maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

    I doubt that it is possible for two reasons. Dell went from IDT Realtek as the audio seller so probably not more a a contract with IDT, if IDT even exist anymore. A year ago IDT was acquired by another company. I do not know its current status, but it is sure that the acquiring company will not be upgrading old software IDT. Reference Dell itself does not write the audio drivers. Even when IDT was the seller I believe that Win7 drivers are the final versions - no version 8 or 8.1 I think.

    johnsdagg
    If I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

    The native Windows audio driver can't stand struggling external mic. It is a MS 'known problem '. MS must implement a decision-making support, but there is no indication that it will be. Meanwhile, you have two workaround solutions. You can switch backwards between the natives and the IDT drivers. At some point Win10 could leave the IDT driver works correctly. Or get an outlet cheap usb audio to the microphone. Struggling running out-audio driver usb Windows native usb and so dependent no driver IDT.

  • MacBook Pro(MID-2012):Issues after Upgrading to El Capitan

    I use Macbook Pro mid-2012 version. After upgrading to El Capitan, I am facing a lot of questions.

    (1) the DMG files does not open. said hdiutil attach has busy resource failed.

    (2) my Macbook Pro will not stop completely.

    (3) my systems updates install completely. They hit each other between installation (had to force quit)

    ' (4) ' about this Mac ' gets hit when trying to access storage tab.

    Any suggestions?

    Your MBP was working perfectly before the update?

  • ProBook 4520 s camera issues after upgrade from Windows 7 to Windows 10

    ProBook 4520 s has problem with webcam after upgrade to Windows 10.

    Skype and other software do not have access to the camera.

    Drivers installed after the upgrade - universal HP (Realtek driver) looks OK in Device Manager.

    FIX:

    -Deletion of Arcsoft Camera sharing (installed on Windows 7 at first) in the Device Manager.

    -Download and install PC Camera Driver from Realtek Realtek support on site area:

    http://www.Realtek.com/downloads/downloadsView.aspx?langid=1&PNid=30&PFID=43&level=4&Conn=3&DownType...

    NB needs to restart.

    Skype now see camera and works OK.

    Solved.

  • ASDM issues after upgrading to JAVA 8 on Macbook

    Hi all, I have a MacBook running and just put 10.10.2 upgraded to version Java 8 40. You'd know ASDM began to 'freeze' after that I connect to the device and ASDM is attempt to analyze the configuration. What happened when I hit an ASA 5545 9.3.1 running code (ASDM 7.3.1) but it does NOT occur when I type an ASA5520 9.1.5 older code running (ASDM 7.3.1). Odd. Anyone else seeing this? Sure enough when I drop Java to 7 build 75, AMPS works well again when I connect on these devices.

    As a test, I improved ASDM to 7.3.3 and moved to the top of the size of the heap by the release notes, but that did nothing to solve this problem. ASDM freezes again as his attempt to analyze the configuration (about 2 to 4 seconds after I login).

    For any help or suggestion would be appreciated.

    Thank you

    The f

    Looks like you hit the following bug

    CSCut04399

    ASDM crashes on MAC after upgrade to Java 8

    Workaround solution:
    None

  • Performance issues after upgrade to view 5 on Windows 7

    I'm having a lot of performance problems after upgraded to vSphere 5 and 5 view connecting using PCoIP.  Interaction with the virtual machine are slower with either double or single monitor.  I tried all solutions different workaround proposed on the site of Teradici.  If someone has bugs or suggestions about how do to clear up things please answer.

    Add the following line in the vm config file.

    mks.poll.headlessRates = 1000 100 2

    It should solve your PCoIP lag problems, let me know what your results are.

  • HP 110-023w Desktop H5P41AA: network adapter keeps droping after upgrade to win 10

    After the upgrade to windows 10 I am able to get on the internet, but when I go on a site it says "cannot display page" or gives a "404 error".  A few times it will go not to the page, but most of the time. Try refreshing page and mighi work 1 on 3 to 5 times. Pilots refreshed and same results. Help, please

    Hello @stanback,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    "I understand that your computer displays an error message indicating that the"page cannot be displayed"or gives a ' 404 error ' after upgrade to Windows 10, and I'd be happy to help you!

    According to the list of compatible drivers for your desktop computer, there is currently no Windows 10 NIC drivers or software distributed at this time.

    In the meantime, I recommend that you follow the steps described in this document on products HP - where can I find Windows 10 drivers and software for my model?

    I hope this helps!

    Best regards

  • Pavilion P6130F blue screen after upgrade to Win 7 because of the NVIDIA graphic card

    My computer was working fine under Vista 64-bit. I got the upgrade CD Win 7 64 bit. The installation went well. But after a few days I get BSOD. The computer hangs at random: opening Visual Studio or even open a folder. The graphics card shows as NVidia GeForce 9100 in the Device Manager. I downloaded and installed the latest driver from HP site. That did not help. Then I installed the latest driver from NVidia site itself; This file is named: 195.62_desktop_win7_winvista_64bit_english_whql.exe, but that did not help either one.

    Taskbark of the window has a message that 'graphic NVIdia has stopped working"and then recommend downloading drivers.

    I used the program "WhoCrashed" and that's what he said:

    Crash dump directory: C:\Windows\Minidump

    Dumps are enabled on your computer.

    Saturday, November 28, 2009 16:12:22 crashed your computer
    This was probably caused by the following module: nvlddmkm.sys
    Bug check code: 0 x 116 (0xFFFFF8801013E230, 0xFFFFFA80074ED4E0, 0 x 2, 0 x 0)
    Error: VIDEO_TDR_ERROR
    Empty the file: C:\Windows\Minidump\112809-25646-01.dmp
    file path: C:\Windows\system32\drivers\nvlddmkm.sys
    product: NVIDIA Windows Kernel Mode Driver, Version 195.62
    company: NVIDIA Corporation
    Description: NVIDIA Windows Kernel Mode Driver, Version 195.62

    Help, please. I don't want to spend hours either roll back to Vista or reformat and start over. It is losing too much of my time.

    Thank you!

    Install this hotfix

    http://support.Microsoft.com/kb/976972

  • Blue screen after upgrading to Win 8.1 - Satellite C850 - 17G

    A year ago, I bought a Satellite C850 - 17 G (PSKCCE) with Windows 7 pre-installed. For a small fee, I upgraded to Win 8. Worked well.

    In November 2013, I wanted to do the free update to Win8.1. There I estimated at 2.5 months and a lot of reading on the forums to complete the upgrade to 8.1 Win. Everything worked fine for about 3 weeks.

    Can I get some updated windows up-to-date pressed, restarted the laptop and it ended the history of success.
    Blue screen and I had this option was to force back to the factory settings.
    So here I am again with Windows 7.

    On the Toshiba site, I see now that my model of laptop, Satellite C850 with part No. PSKCCE is not a model of support for the update 8.1 Win. Can someone tell me why?

    It will support in the future?

    > On the Toshiba site, I see now that my model of laptop, Satellite C850 with part No. PSKCCE is not a model of support for the update 8.1 Win

    Hmm, I guess you're wrong because on the Toshiba UE driver page I could find drivers Windows 8.1 for the Satellite C850 PSKCCE
    http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

    BSOD issues are really bothersome, because this can happen due to hardware malfunction or also due to problems of system or driver.
    Same 3rd party software could affect systems

    That's why it very difficult to say what might cause this problem without checks unique pieces, the pilot, and the reporting system.

  • Cool eco does not activate the Portege Z10T after upgrading to Win 8.1

    I mainly use my Ultrabook plugged in power & after upgrade to 8.1 Win Win 8 the "Eco-Office" is no longer active, constantly charge the battery to 100% when it should be 80%. I discharged the battery up to 10% and then active eco-responsible, but without success.

    Anyone have a solution please?

    First question:
    After the upgrade of Windows 8 to 8.1 Windows did you download the installation drivers Toshiba and such software mentioned in the installation instructions located on the Toshiba UE driver page?

    Its very important to install and update the Toshiba Utilities to get a good Win 8.1 working system.

  • Satellite P850 - 057 Webcam does not not after upgrade to win 8.1 pro

    the webcam was working fine until what the windows upgrade to Win 8.1 pro, the webcam is not displayed in Device Manager. BIOS definition OK, I could not find a driver for TOSHIBA WEBCAM HD for windows 8.1 pro, please help

    Hello

    The Windows 8.1 does not require driver external webcam.
    Usually, the webcam driver is part of the Win 8.1 system and so the webcam should be recognized automatically.

    To my knowledge, the webcam is connected to the USB controller. You have a few unknown devices (USB devices) in Device Manager with yellow exclamation?

    By the way: you would update the BIOS to the latest State and system of Toshiba driver to win 8.1 installed?

  • No output micro HDMI after upgrading to Win 8.1

    My new Yoga 2 Pro has a secondary display connected via micro HDMI port. He first worked as a charm. But after upgrading to new Windows 8.1 (this is done automatically) it is no longer produced anything to micro HDMI port. Display and the cable is fully functional. But even if the screen is turned on, the computer is unable to save and apparently it cannot display anything. Micro HDMI port seems to be non-existent.

    After upgrade of windows, I tried to uninstall / reinstall the display driver. I also upgraded to Win 8.1 Intel drivers versions found on the support site of Lenovo (including the BIOS display driver Intel HD 4400 15.33.18.64.3496 and chipset 9.4.0.1026, 76CN38). But nothing seems to work.

    A solution in the forum is to change the cable, but I think that there is no sense here that the cable worked perfectly until the upgrade.

    Can anyone suggest a solution?

    Lenovo: Is there a driver for Intel version 15.36.0.3652 on the Intel Web site. However, there is a blockage on the pilot, you need to install own Lenovo driver downloads. Can you check if this solves the problem?

    Sorry, a new cable solves the problem

  • T430s and create recovery media after upgrade to win 8 Win 7

    Is it possible to create a recovery media after upgrade to Windows 8 of a factory installed Windows 7?

    You do before the upgrade.
    NO.

  • Error number: 0x8024400A after upgrade to WIN XP...

    Reception [error number: 0x8024400A] after recording of WIN XP for updates reviews... What is the work around from a fresh install of WIN XP Pro?

    Hello

    Try the methods provided and check whether the problem is resolved.
     
    Method 1:
    Check out the link and follow the steps.

    Cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP, or after you install Windows XP SP3 immediately after a clean installation of Windows XP SP2.
    http://support.Microsoft.com/kb/943144
     
    Method 2:
    You can also visit this link and follow the steps.

    Temporary connection related errors may occur when you use Windows Update or Microsoft Update
    http://support.Microsoft.com/kb/836941
     
     

Maybe you are looking for

  • Migration to the new leading directory of Xcode 7.3.1 PCH errors

    I moved my folder under/User to an another new update short user name folder. Just fine, except when I ran Xcode 7.3.1 only he had the build errors referring to the former name of folder.  Locations is set correctly using the new name of the folder,

  • RN31400 access SO slow

    We use this storage sharing of CAD files and revit for writing. Before, it worked perfectly so that we can still work on the same file at the same time. However, recently, without any upgrade on any virus protection software, it randomly works really

  • For indexing loop (tables)

    Hello and thanks for reading. I have a problem that requires me to do a lot of manipulations with the berries, and I am doing this in a series of nested for loops. I'll cut straight to my question. I initialize an array 0 in several user-defined colu

  • Subinacl.exe working correctly in windows 7 64 bit?

    I read tha windows resource kit 2003 are not supported in 64-bit environments, and I want to use subinacl.exe to change permissions of registriy. Is it possible to use it without problem? If the answer is no. Could you recommend me any other utility

  • How can I get HP 3050 multifunction Scanner to work with Windows 7?

    When I hit the scan button and then start scan the printer reads "not installed on the PC" the functions of the printer and fax work via the computer.  I went online and found three sets of drivers for Windows 7 64-bit PCL 6 x 64 Post Script x 64 PCL