Equium P300-16 t - button / stop cable necessary Ribbon

Similar Questions

• Re: Equium P300-190 - multimedia keys doesn't light up or work

  Multimedia keys between the speakers on my Equium P300-190 have suddenly stopped working and illuminating, the power button and the bar at the top of the touchpad still turn on any ideas how solve this problem?

  Thank you

  I don't know much on your laptop, try to update the utility Ppvs of the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
  In addition, check in the Bios or install hw if illumination led option is enabled

• Equium P300-16 t with Synaptics touchpad. Stuck left button?

  Hi all

  I have an Equium P300-16 t with a Synaptics touchpad.
  A few months back I had the following problem. As soon as I touch the touchpad or the left/right button, the icon will appear to show the button on the left as being depressed; It would be nice up to this point. I've updated the drivers, tried a system restore, checked under the button of touchpad for obstruction etc and nothing has changed.
  I made a completely new reinstall of Windows... still the same problem. Suspected a defective touchpad, so I contacted Topaz for a replacement touchpad mounted that and still the same problem.

  so... after having eliminated defective drivers/software/hardware, I'm out of ideas. Is there anything else I can check?

  Works very well with a USB mouse.

  Thank you

  James

  > As soon as I touch the touchpad or the left/right button, the icon will appear to show the button on the left as being depressed; It would be nice up to this point

  I think you should check the settings.
  In Control Panel-> mouse-> last (Advanced) tab-> the Advanced Settings button

  Here, you should be able to get all the parameters of the touchpad.
  In my case, I found interesting feature in the speed of the pointer and typing parameters.

  There is a charming area of tape, and if you enable registration you could get access to other environments of tapping.
  The option is called DragLock in my case that his automatic release and auto release delay value is set on the court.
  Recommend you check this!

• Equium P300-16 t - replacing the DC cable

  I'm looking to replace the DC-cable on a laptop Toshiba Equium P300-16 t, everyone has instructions to disassembly and Assembly (including photos if possible)

  Thank you

  null

  If your adapter is faulty, buy a new
  It s not expensive

• Equium P300 - control buttons do not work currently running Win XP

  Hi, I'm looking for help with a problem with a laptop Equium P300.

  This is my brother's laptop, he bought about 18 months ago, it came with Vista, he did not want what he preferred to have XP, so I changed the XP operating system by using the drivers available on the Toshiba Web site, update the appropriate drivers.

  This has worked well for the last 18 months, however, recently, when the laptop is off, touch-sensitive shortcut keys remain lit, even when disconnected from the power supply and do not work.
  Previously, if it has been disabled and you press one of the keys shortcut the laptop turns on but is no longer doing this.

  I wonder if anyone has had this experience before?
  Anyone have any suggestions on how to fix this or even what the cause of the problem?

  Thanks in advance for any help you can offer

  Keith

  Hello

  You use Win XP on this laptop, then you must update the BIOS because there is a special BIOS for Win XP!
  In addition, the Toshiba multimedia control buttons are controlled by tool controls of Toshiba. You can download it from the page of the Toshiba driver.

  Regarding the buttons of enlightenment;
  AFAIK you can enabled and disable in the BIOS itself!
  Check the BIOS settings,

  Welcome them

• Equium P300-19O does not start

  Hi all

  I have an Equium P300-19O, which I have had the problem. Now the pc doesn't even start not at all. When I turn it on, there is not even a power light and it doesn't do anything.
  Could someone of you please advice me to solve this problem and resuscitate Equium P300-19O?

  Best regards

  Taro

  > Could someone of you please advice me to solve this problem and resuscitate Equium P300-19O?
  You must understand the hat on this virtual path that nobody of can say for sure what is wrong there and we can only speculate on the potential problem.
  Who knows what's wrong there. Maybe there is a problem with electronic control gear.

  Unplug the power plug, remove the battery and leave it for a while. Try to start the laptop with AC power only.
  When you connect the AC power supply is LED on indicator system turned on?
  Is there a reaction when you press the power button / stop?

• Equium P300-16 t - no power

  Hello...

  Not sure if anyone can help me out here?

  I have a Toshiba Equium P300-16t

  Initially when turned on, lights, dvd starts, 2 low beeps (which seems to do it on all laptops) then the screen turns on but would not go further?

  I left the power cable with the laptop off the battery when the battery is charged, press the power button, the button light, 2 seconds, goes off... Nothing else happens?

  Anyone know what may be the problem?
  Or if I can do something to make it work again.

  While the laptop seems to be starting, (lighting of the screen to the top) I tried a new screen, the same result, the new ram and hard disk, always the same result...

  Now without apparent reason, as I said, since the loaded battery, laptop don't even start? (I tried different batteries and without battery but still nothing?)

  Thank you very much in advance for any help anyone can offer.

  Kind regards.

  Deevie

  Hello

  I put t think the battery is the problem.
  If the AC adapter is plugged in the laptop must lights without the connected battery. You have tested the new RAM and the problem persists?
  Well, in this case, the motherboard may be defective or other part as CPU.

  It seems that the laptop can not pass the POST (power on self test) and in this case primarily the motherboard is default.

• Equium P300-16 t - error Code 0 x 490

  I have a laptop Equium P300-16 t.

  I had an attached external hard drive, 5 minutes later computer started making a loud noise and froze, it off using the top off button.
  Turned he went back on start-up repair mode ran it for about 30 minutes then indicated it could not be repaired system manufacturer or contact admin (us).

  Research on the Startup Repair diagnosis page that everything seemed to be spent out of the last thing here is what he said Word for Word

  No os found on disk file
  Code Repair: failed. Error = 0 x 490
  time taken = 14726ms

  I can't go to the login page it stops in this starting point upward.

  Help.

  Hello

  Resemble something happened with the operating system on the HARD drive.
  Eventually, the HARD disk or partition on the HARD disk is damaged.

  You are able to install the OS once more?

  Can you see the HARD drive in the BIOS?

• Equium P300 - 16t power problems

  My laptop Equium P300-16 t has suddenly stopped working. When it is connected, the power icon is always on view, but the battery icon has disappeared, and the battery icon when you press the power button flashes red for a few seconds before disappearing... it means I need a new battery?

  I thought that the computer could work without the battery, if it was still not able to connect to a power supply via the power adapter? I just wanted to check before you buy a new battery, I don't want to spend £50 on something that is unnecessary, especially if I have to buy a new laptop.

  Any help would be appreciated.

  Hello

  I don t think you need a new battery because the laptop should work without the battery only on the AC adapter.
  I guess that this problem is related to the motherboard or components (RAM) on the motherboard.

  Guess what? Try this:
  Disconnect the power adapter and remove the battery.
  Now press the power button / 30 sec long. Connect the two parts, then try to turn on the unit.
  To be honest I m not sure if this would help you but it s worth a try

  If this does not help, delete one of the RAM modules and test the device using a module in each slot, but in the worst case it is a motherboard problem, and this should be verified by a Toshiba ASP

• Equium P300-16 t keyboard problems

  I have a laptop Equium P300-16 t of a friends tone asked me to look at.

  The computer does not successfully start upward, and I can narrow it down to a hardware keyboard, as failure when the keyboard is connected random keys are pushed.

  I was wondering if anyone can point me in the right direction for spare parts for it.

  Concerning
  Rutter

  > Computer won't initialize properly...
  Can you please elaborate on this subject?
  What happen exactly when you press the power button / stop?

• Equium P300-190 - Question about upgrading the processor

  Hello

  I just have a question for my CPU PC Toshiba laptop, I have a can of Equium P300-190 full to give model number if necessary the cpu is one supplied with the laptop.

  My question is I want to upgrade the processor but do not know which would be the best option and there are limits with the BIOS, etc. on board.

  Any help would be greatly appreciated.

  Probably it is not known to you that upgrading the CPU is not officially supported by the manufacturers of portable.

  The CPU upgrade is a tricky thing... the fact is that the CPU must be supported by chipset and BIOS.
  Where a party would not support the new processor, the unit will not light.

  So even if you use a CPU that is supported by the chipset (Intel GM965) there is a risk that the BIOS could not support the new processor...

  The laptop was equipped with processor Intel Pentium Dual-Core processor T2390 (Merom code name) probably the other CPU Intel Pentium Dual-Core family-owned would be compatible, but to be honest, you won't see a performance improvement...

  So in my opinion it is not worth trying to upgrade the processor...

  In my opinion, you need to replace the HARD drive with an SSD... in that case you will get the performance improvement...

• Equium P300-16 t - very dark screen

  Hello

  I have a Toshiba Equium P300-16 t, but the LCD is very low
  I see about the office, works fine on an external display.

  I tested the LCD on another laptop and works OK,
  I also replaced the inverter and flex cable but still no luck

  The GPU would have gone?

  > I see about the office, works fine on an external display.
  To me, it's proof that GPU must be OK.
  When you start your laptop is the faint display even when you see Toshiba welcome screen or enter the BIOS settings?

• May not wake my Equium P300 from sleep mode

  My * Equium P300-16 t * not waking up from sleep mode.

  If I use Fn F3 I get the message enter sleep and from what I read by pressing the power button wake the machine upwards, but not in my case.

  I also tried the Power Options to automatically mode after a specific period, but once again I can't wake the machine and do a hard reboot.

  My OS is Vista Home Basic.

  Anyone offers advice on how to fix this please?

  Thank you

  > but again I can't wake the machine and do a hard reboot.

  Your BIOS is up to date?
  Otherwise, update the BIOS

  Also in my experience sleep mode issues could be caused by corrupted system, so new facility could help solve this problem too.

• Equium P300-16 t: a few issues after upgrade to Win 7

  Hello

  I just moved my Equium P300 16 t from Vista to Windows 7 and everything seems to be fine. At least, everything works.

  Before the upgrade, I downloaded some Win7 drivers, and other files (things like Config fr.;) Hardware configuration; Card reader controller supervisor password utility. TEMPRO and others)
  Device Manager shows no problems I have to install one of these elements.

  I think that if it is not broken, do not fix. But I'm not sure about these.

  Another thing, after a series of updates from Windows, I lost the Windows event sounds.
  They work when tested, but not in use.

  All other works of his property, and that's the only driver Toshiba I installed where he fixed, but not good.

  Very grateful for any advice

  Thank you

  > I believe very much that if it is not broken, do not fix. But I'm not sure about these.
  If there is no yellow exclamation point and no unknown devices are visible, this means that you have installed all necessary drivers for don t be worried

  > Another thing, after a series of updates from Windows, I lost the Windows event sounds.
  Well, are the different selected sound for unique events? Or maybe that sounds have been cancelled? This should be checked

  > All other works of his property, and that's the only driver Toshiba I installed where he fixed, but not good.
  Well, you can also try to update the audio driver
  The laptop seems to support the audio chip Conexant CX20561 you can search for updates on the internet, but to be honest, if the sound works fine (except for the event sounds) so I wouldn't change anything personally I disabled all the sounds of the event on my laptop because I don t like this

• Equium P300-16 t cannot connect to TV via HDMI

  I have an Equium P300-16 t and a TX-32LXD52 TV with a HDMI input terminal. I tried to connect Toshiba HDMI to TV HDMI TV AV control after.

  When I connected the cable the Toshiba reported a change in the display device (he changed the screen resolution), but when I click on the HDMI Out icon, it says could not connect.

  I just noticed that it says in the manual of the TV that the input terminal is not adapted for use with computers.

  I use a son plated gold.

  SPECIFICATIONS:

  Cable: Double shielded
  Color: black
  Length: 1.5 m
  Connections: 19pins - 19pins DORÉ

  Compatible with all devices that use 18 or HDMI 19pin ports:

  Box of HDTV, PS3, Sky HD, HD-DVD recorders/players, other Set Top Boxes, video monitors, projectors, LCD and PLASMA TV etc.

  The note in the TV guide really means I cannot use the installation of Toshiba HDMI or is there something I can do to work around it?

  Thank you

  You have a FULL HD TV?

  You can switch between using the FN + F5 key combination?