Equium P300-16 t: screen turns pink!

Similar Questions

• Equium P300-19O - black screen and does not restart

  My Equium P300-19O had a blue screen of death after a few accidents occurred due to a broken Windows media player which 3 safe resets and then I get a blue screen of death.
  I restart the laptop, but now I have past the toshibia load up, but do not get further rather get a black screen with a dash flashing in the upper left corner.

  Please suggest anything that could help me get the laptop again.

  Hello

  Have you checked if you can boot into safe mode? You can try to start in safe mode if you go into the advanced boot menu by pressing F8 after you have switched on the laptop. Here you can choose.
  Maybe you can also try a system restore to a previous state.

  If it doesn t work it should boot from the recovery disk Toshiba and reinstalling Windows.

• Satellite L350 - screen turns pink

  Hi guys, I was wondering if you can help me!

  I just bought a new Satellite L350, but after a few days of working with it, my pc screen goes pink! It goes back to normal for a short time, then flashes and then goes back to a shade of pink!

  I handed my laptop to the dealer, but after a few days, the dealer gives me the laptop and said that the laptop is OK. (the laptop was not repaired be the dealer, has only been tested, but no problem occurs at the moment) Now it works normally...

  I thing this is a manufacturing problem material, because it happened just the power button is pressed, the window is load.
  I've read a few articles on the internet and most of them referred to it as a problem of bulb.

  Do you: I must insist to the dealer to replace my laptop with a new (or repair) o

  Any ideas?

  Thanks in advance,

  Have you tried to update the display driver and BIOS? Maybe it s a hardware issue, but first, I would try to update the two things.
  Consult the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  You have the same problem on an external monitor? Can you check that out, please?

• Equium P300-16 t - screen goes black after 5 minutes

  I'm a total novice when it comes of laptops so not even sure if I use it properly, but if his left not used sometimes for even 5mns, the screen becomes black and cannot not be woken up with pressing keys or the mouse.

  The other lights are all on but when I try to unpress the NumLock light is frozen. The only way to fix is to turn off and on again. I'm on windows vista.

  Any help at all would be appreciated.

  Hey mate,

  You can see the same problem on an external monitor or this only happens on an intern? In addition, it would be interesting to know what display driver that you have installed and if you use the preinstalled operating system.
  Also, update the display driver could also be helpful in this case.

  It is really hard to tell what is causing this problem and in the worst case, it s a hardware problem and something should be replaced. :(

• How can I solve a screen turned pink muse?

  

  Does anyone know how to repair this screen? I've tried everything...!

  On the view menu, clear the check box show the grid overlay.

• Equium P300-16 t BSOD and black screen after the removal of GPU

  I have a Toshiba Equium P300-16 t and I was getting 90 c - 95B on realtemp so I bought a thermal paste of isopropol alcohol and yesterday that I changed the thermal past on the CPU and the GPU.

  When I booted up after that there was a long beep that lasted a few seconds and my speakers a few cracking apart from that everything was normal, but then after a few minutes my screen is odd (for example, green artifacts) and then went black.

  After awhile, I started my laptop to the top and the same thing happened with the speakers and a beep but the screen was fine. I opened realtemp and became c 65 - 70 c, then restarted because of an Avast update.

  Now, when I turn on my laptop the screen becomes either black or I get a BSOD 0x0F4. I tried to boot from a USB Win7 and repair, but the rest screen went black, so it is not a HARD drive problem as some sites say (from the BSOD error).

  BSOD is mainly a product of serious software problems or it seems due to a malfunction of the equipment.
  I guess this is NOT question related software since you don't touch software (am I right?). So I think you damaged somewhere during the disassembly of the laptop or the removal of CPU and GPU.

  I have no other way for you to control the affected parties? How?
  I guess you need a help from a technician who would be able to analyze the material for potential problems.

• Equium P300-16 t - very dark screen

  Hello

  I have a Toshiba Equium P300-16 t, but the LCD is very low
  I see about the office, works fine on an external display.

  I tested the LCD on another laptop and works OK,
  I also replaced the inverter and flex cable but still no luck

  The GPU would have gone?

  > I see about the office, works fine on an external display.
  To me, it's proof that GPU must be OK.
  When you start your laptop is the faint display even when you see Toshiba welcome screen or enter the BIOS settings?

• Equium A100 - screen turns off when I open the lid completely

  I recently had a problem with my Equium A100, as when I open the lid fully, the screen turns off.

  However, when the half open, the screen is completely visible.

  I have attempted to open the screen and can not see loose cables to my knowledge.

  Any help on how to solve the problem would be appreciated.

  I agree with Akuma. It sounds like a hardware problem and probably the contact loses when you open the lid.
  The cable screen should be checked and probably replaced.

• Satellite P300-PSPCCA - screen went pink

  Hello

  I'm running the laptop model above.
  Used last night for a few hours and the screen went pink, I tried some restorations system nothing not helps, it is not I have checked res settings screen.

  A loss of what it might be, anyone got advice on fixing it?

  The entire screen is pink, I have a slight shadow behind my mouse, some graphs go up in shades of purple/pink.

  Thank you

  Hello

  Have you tried to plug the external monitor? If it is still pink, it may be a malfunction of the graphics card.

• Equium A200 - screen turns off

  Hi, I'm having a problem with my Toshiba laptop, the screen turns off randomly and the computer still seems to work, but when I use a VGA cable to connect to a TV it does not display anything.

  Here are pictures of when it fires
  http://Tinypic.com/r/vr9d7d/7 yellow on the disc tray is turned on
  http://Tinypic.com/r/2d9poya/7 that the front turned on lights and computer sounds like its operation.

  This led me to believe it's a hardware problem, but when I turn on the computer in Mode safe it never turns off. I also got the fixed ups this year because the screen was losing power.

  Can anyone help I can't really afford a new laptop at the moment

  Hi David,

  It's a little confusing, it doesn't always happen when you shut down the computer, or just sometimes?
  What do you do to get rid of this? Always remove the battery and the AC adapter or what exactly?

  I think that it s a hardware malfunction, usually has nothing to do with the software. What you can try is a BIOS update from the official website of Toshiba.

• Equium A20 fell and the screen turns off always

  Hi, I was using my satellite A20 long (4 years). Never had any problems. Recently he fell and the screen turns off always.

  I can see the toshiba logo and the windows logo also when starting, and even I can enter the BIOS and change the boot order too... but as soon as windows load screen is black. I don't understand

  Anyone with the solution?

  Thanks in advance...

  Hello

  > but as soon as windows load screen is black. I can t understand
  This means that the display output has accidentally changed to an external.

  Have you checked if something would be visible on the second external monitor?
  Select this check box.

  In addition I advise to use the FN + F5 keys to check if you can switch the output back to the internal display.

• Equium P300-16 t - no power

  Hello...

  Not sure if anyone can help me out here?

  I have a Toshiba Equium P300-16t

  Initially when turned on, lights, dvd starts, 2 low beeps (which seems to do it on all laptops) then the screen turns on but would not go further?

  I left the power cable with the laptop off the battery when the battery is charged, press the power button, the button light, 2 seconds, goes off... Nothing else happens?

  Anyone know what may be the problem?
  Or if I can do something to make it work again.

  While the laptop seems to be starting, (lighting of the screen to the top) I tried a new screen, the same result, the new ram and hard disk, always the same result...

  Now without apparent reason, as I said, since the loaded battery, laptop don't even start? (I tried different batteries and without battery but still nothing?)

  Thank you very much in advance for any help anyone can offer.

  Kind regards.

  Deevie

  Hello

  I put t think the battery is the problem.
  If the AC adapter is plugged in the laptop must lights without the connected battery. You have tested the new RAM and the problem persists?
  Well, in this case, the motherboard may be defective or other part as CPU.

  It seems that the laptop can not pass the POST (power on self test) and in this case primarily the motherboard is default.

• Need new motherboard for Equium P300-16 t

  Hello!

  I have Toshiba Equium P300-16 t, model PSPC2E-003003KS number, one day, my computer does not start. don't answer no signal on the screen. so I really think that this motherboard is broken, or turns off! does anyone know how can I get new motherboard for my laptop?

  I have given where to see the name or number of the motherboard. where I also see this?

  Please people! I really need help!

  Thank you

  Hello

  I can imagine to find the new motherboard will be quite problematic and what you can do is to contact nearest Toshiba authorized maintainer and ask for help.
  They have access to the database of Toshiba and can tell you the exact reference.
  For you is important to get the motherboard for model PSPC2E and it will be exactly the same.

  Problem is this motherboard is very expensive so think twice what is the best option for you: to exchange it or buy new laptops.
  You want to exchange it only?

• Error restoring my Equium P300-16 t

  Hello

  I wonder if anyone can help me? I'll be honest and admit, I'm not surprisingly technical interest, but I'll have a go!

  Basically, I tried to restore my factory settings on my equium p300-16 t (F8 menu path, not with a cutting-edge disc) and went halfway through reinstalling my battery!

  Now when I turn on my computer it goes straight to the menu "windows error recovery" that says "Windows is not stopped successfully. If it was because of the system does not, or if it has been closed to protect data, you might beable to recover by choosing safe mode configurations from the menu below '.

  Can I get the startup options of my laptop in safe mode, safe mode with the mode of networking, security with command prompt, or start windows normally.

  I can't start in safe mode and only get a pop up menu saying "Windows is unable to complete the installation in safe mode. To continue installing windows, restart the computer. »

  When I restart the computer and start windows normally, my computer starts to continue re installation, saying "the installation may take several minutes. Please do not break in closing the computer! ». However, I can't get beyond this menu. It is present on my screen for 5 hours now, with the loading bar.

  If anyone has any advice or can tell me what I managed to do it, I would be eternally grateful!

  1 million thanks!

  Hello Elizabeth

  I'm sorry to hear you have this problem with this great P300 notebook.
  Please don't get me wrong, but you made a big mistake. In s manuals are strictly advised not start battery power recovery procedure.

  At this point, I have two important questions:
  Can you raise your laptop computer with F8 and repair my computer option is available?
  You have created recovery DVD suite preinstalled Toshiba reminder and instructions contained in operating manuals s?

• Equium P300-16 t - after disassembling it does not start

  Hi all, I'm new and I came here looking for help.

  I have a Toshiba Equium P300-16 t (I think it is such and such Satellite in the USA). Like many other people I got the BIOS password suddenly appearing problem, so after trying different passwords of 40 or 50 and getting nowhere, I decided to go for the solution of removing CMOS battery. I opened the laptop, find the CMOS battery, removed, left the laptop like that all night, just to be safe.

  Today I reassembled everything, check three times to have reconnected the very few things that I had disconnected yesterday. I turned it on and the screen remains black. I can hear the fan from the rotation of the disk a few seconds, then it's the silence and the darkness. :( I tried to connect to an external monitor: nothing.

  I even opened again, just in case I forgot to reconnect the video card or something, but no, everything is in place and well connected. So I removed the CMOS battery again for half an hour or so and the order again: nothing.

  Is there anyone who has any idea of what's going on?
  At I have kill comes finally the laptop for good?

  Thanks for everything what help you can offer.

  Hello

  Unfortunately I think you did something wrong during the disassembly of this process. It's not easy, it s delicate and you should remove many parts, live, etc.. In addition, you must always be grounded like the professionals, otherwise, you could destroy this material of sensitivity.

  Anyway, in my opinion, you must contact the nearest authorized service provider. Guys can help you solve this problem. You will be surprised, how well the guys and it s still interesting to talk with them a little more if you buy a coffee.

  Here is a list of them:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)