Equium P300-19O does not start

Similar Questions

• Equium P300-190 does not start after battery

  Hi all

  The battery died on my laptop, Toshiba Equium P300-190 and power off.
  I have pluged in the output, but it won't start. The light is not yet on the front of the PC.

  Please shed some light on this problem on the issue that can be resolved.

  Thanks in advance

  Concerning
  Taro

  Hello

  Try this:
  Remove the battery and unplug the notebook sector.
  It takes a few hours (in my case, I left the laptop throughout the night disconnect battery and network.)
  Then reconnect the two parts and check if the laptop lights

  If it s hardware problem without gravity, then the laptop must turn on, otherwise you will need professional help

• Satellite P300-28th does not start - windows does not load

  I bought Toshiba P300 28th last week. I spent Vista business successfully in Windows XP Professional with provided Toshiba DVD. Update Windows with Windows Update. After 3 days, laptop turns off suddenly, and because Windows does not start, it in fact does not start.

  When I press the power button / stop, it turns on, shows "Toshiba Leading Innovation" logo image option and "2", "press 12...", and it hangs and stops.
  I tried pressing F2 and F12, nothing happened.

  I can not access the boot menu.

  I put the Toshiba Recovery CD, the hard drive does not work. Recovery disk does not start, despite earlier I remember put boot CD/DVD at the forefront in the Boot Options to Boot Menu.

  I checked everything, power cable, took the battery in and replace after 3 hours, tried to turn on the portable power, without battery cable. Did not help.

  Don't know what to do?

  Your help is very appreciated.

  Hello Fiona

  If you are unable to enter the BIOS (F2) at startup settings there must be some serious hardware problem.
  I recommend to contact your local dealer where you bought this laptop and ask for help, or you can contact Toshiba service provider directly.

  What you have tried to do is good but if laptop doesn t allow you to enter parameters of the BIOS something wrong here, and you need professional help.

• Equium M50-192 does not start

  Hello
  I posted a question here earlier on my laptop and I had useful assistance but he juices do not appear to have sorted.
  but I have now no wat it is not and just don't need to know wat it is

  I have a toshiba m50-192
  and when I turn it on it does not start going to a black screen and gives me errors (pxe - e61)

  in my last question, I was told that it was the hard drive was dead.
  Since then, I've replaced my hard drive and my hard drive, but it always seems to be doing almost the same

  I can get into my bios and the hard drive is recognized.
  I tried to boot from the disk recovery and hard drive but no joy.

  but since I replaced both drives when I boot from the hard drive it gos just a black screen with the little line in the upper right corner.

  but when I boot from the disk it gives me this error pxe - e61, which is where his tent to boot from the network I have read.

  until I replaced my hard drive, he had a strong look that has disappeared since I replaced it.
  the disk hard im trying to use now is off my brother's mobile which all ready installed xp on it it would make a difference when you try to boot from the hard drive? (my laptop is xp)

  I read something on definition of my hard drive to the master and my cd player to the slave that would make a difference and how would I do?

  I think it's as much information im aware off

  could someone please help as im stuck and did not have any idea what to do

  Post edited by: domio
  o im also getting the and pxe - e61 pxe - m0f error code

  Hello!

  What happens to an error you get? Please post what we can help you.

  To be honest that I n don't know what you mean with clip Ribbon keyboard but if the keyboard is faulty or something else, the keyboard completely must be exchanged. You are not a unique key or something else.
  If you want a new keyboard or other spare parts contact your local ASP.

  Good bye

• Equium A100-338 does not start the OS Vista - update Bios?

  Hi guys,.

  My laptop (a few months) decided to die and was told by tech support that it might be because of the BIOS. The problem is that the computer does not start the operating system (Vista) and the update of the BIOS available only is the version of windows. Are there any other mirror to get the traditional update or even a way to convert a the update the BIOS from Windows startup disk?

  Thank you

  Hello

  If you can see that one version of BIOS on Toshiba page then only one version exists and is available!

  > The problem is that the computer does not start the Vista operating system
  I don t think that BIOS could be responsible for this problem.

  You must first provide more info on this problem!
  The laptop goes to home Toshiba screen? Have you tried to recover the laptop with the Toshiba Recovery CD?

  Please provide details!

• Equium A200-1VO does not start and makes weird noises

  My Toshiba Equium A200-1VO don't load on Windows entirely, which means I can't use it. When you turn everything goes well until the Welcome screen in Windows Vista. From there, it starts to get weird creaking and it beeps from time to time. It won't start here and these sounds do not stop.

  Help please

  Hello

  Is it possible to know where the noise comes from?
  As suggested by above user, it could be a HARD disk, but in this case, it would mean that HARD drive failures and he could die in the next time

  You said it s begin properly until appears the window Vista would be
  So maybe it s only a problem of software but I m still don t know what part of the software would create such sound however, I think that if would not be bad to reinstall the operating system in order to check the notebook with factory settings.

  If this strange question would persist or if you would not be able to reinstall the operating system using the recovery disc then a hardware problem could cause this strange things and I think it means that you will need to contact the ASP in your country for a material test

• Ieee 1394 host controller Texas Equium A60-692 does not start

  Hello!

  I have a Toshiba Equium A60-692 about 2 years old. On rare occasions the above will install and also the network/ethernet card etc with it when it starts. But 99% of the time it fails to start upward.

  Tech from Toshiba tell me it's the CMOS battery, but time slept OK for the last week so maybe it could be something else. Other strange things are can only recognize the drive HARD to start from what IDE Standard is chosen in the BIOS options (Enhanced IDE option and I think only used normal overall, ups causes boot errors). Also a green screen with weird graphics on occasion. Also the speed of the processor can be reduced, as shown in the properties of my computer.

  Any ideas from anyone as worried of wasting time to unsolder the battery if this isn't the problem. Could this be a fault of the motherboard that is irreparable? I am a relative novice if need help someone here. This made me!

  Hello

  I think you might be right. Eventually he s a small part on the motherboard that could malfunction.
  If I m not mistaken the controller IEEE 1394 Texas Instruments could be the Firewire port and it s part of the mobo

  Welcome them

• Equium A60-173 does not start after the BIOS update

  Hello people,

  I downloaded a BIOS updated toshiba for my Equium A60 - 173 and while it was loading on, restarted my laptop. Now, whenever I turn it on, the power light comes on for a few seconds, there is nothing on the screen and then it turns off again. I'm really worried, I've done some serious damage. I know a bit of the BIOS, but not that much. I need help, this is how I put a BIOS on here if I can't turn it on and the current one is damaged. Is it possible to get the loaded BIOS on without being able to turn it on?

  Any help will be greatly appreciated! Thanks in advance.

  Concerning
  James

  You could try to remove the battery, wait 2 minutes and then go back, however he only its not very likely that your BIOS update was not successful. If I remember correctly when I flashed my A60-181 this process takes about 10 minutes. If your laptop prematurely reloaded until the program has finished, I'm afraid you have no choice but to send new to Toshiba to be fixed.

  Richard S.

• Equium L100 186 does not start!

  My satellite L100-186 (just over a year) won't start.
  When I turn on the power in green lights, the battery indicator lights up green dvd blinks several times, the unit will stop and then all lights go out.

  The same phenomenon occurs without the battery mounted (except no battery light)
  Help!

  Looks like a hardware problem (maybe the motherboard) and only the technician of the ASP, therefore, may be a serious option.
  That's why guys ASP-contact and ask for help

• Sometimes Equium A110-233 does not start correctly

  I've cured it 3 times this year, but why is it?
  Basically you turn on, small rotation of the fan and crashes. No activity of HD or DVD.
  Unsolder strip down one side of the battery of the bios for 10 seconds. Welding again, rebuild and all is well again.
  Until the next time.

  No idea if this is common on this model?
  Hope that healing can help someone with these symptoms.

  Hello

  > I've cured it 3 times this year, but why is it?
  I think that no one will be able to provide a solution to this issue and whole exactly.
  Is that it doesn t happen permanently, but only sometimes and it s not easy to reproduce the problem
  I think the laptop detailed audit to locate the fault.

  > Desoldering strip down one side of the battery of the bios for 10 seconds. Welding again, rebuild and all is well again.
  I think it was really a bad idea to disassemble the laptop.
  Why? Because this invalidates the warranty!

  So what to do?  :|
  According to me, there's only a way o learn what s wrong. The ASP must be contacted. Technicians can run diagnostics tests and find the fault.
  Here, we can speculate on the fault. Eventually and dysfunction of the mobo or the faulty BIOS battery.

• Equium A200-1V0 does not start after recovery

  Hi all

  I have Toshiba Equium A200-1V0.

  I wanted to restore Vista back to the factory settings and used the recovery disc - everything seems to go well, selected 'no' on the disc Add on to the end, as I don't seem to have one. When you restart the laptop, it goes beyond the post screen, then darkness... nothing happens at all.

  Now, I thought that maybe there was a hardware problem, so I tested it using a copy of Windows XP I - installs fine, no problem. I noticed that the recovery partition "Winre" was 1.5 GB in size and 1.37 GB free. I guess that's complete, it contains a file called "boot.sdi" and the folder called 'sources' in the 'sources' folder there is a file called "boot.wim" and that's, I don't know if this is right.

  Whatever it is, I can't get the thing to work with the recovery disk (Vista Home Premium) and there seems to be no hardware issues that XP is fine.

  Any ideas would be greatly appreciated.

  Thank you

  Danny

  Try to remove all partitions on the HARD disk and re-run recovery.

  You can use FDISK on a BACK (www.bootdisk.com) boot disk to delete partitions non-dos.

• Equium P300-19O - black screen and does not restart

  My Equium P300-19O had a blue screen of death after a few accidents occurred due to a broken Windows media player which 3 safe resets and then I get a blue screen of death.
  I restart the laptop, but now I have past the toshibia load up, but do not get further rather get a black screen with a dash flashing in the upper left corner.

  Please suggest anything that could help me get the laptop again.

  Hello

  Have you checked if you can boot into safe mode? You can try to start in safe mode if you go into the advanced boot menu by pressing F8 after you have switched on the laptop. Here you can choose.
  Maybe you can also try a system restore to a previous state.

  If it doesn t work it should boot from the recovery disk Toshiba and reinstalling Windows.

• Satellite P300 does not start immediately

  Hello

  My Satellite P300 does not start immediately. I have to press the button start ca. 20 or 30 times.

  No results?

  Hello

  I have the Satellite Pro P300 in front of me. I use it almost 4 weeks now and I press the Start button, very gently and keep it down to the second or two and laptop starts fine everytime I want to start it.

  Do not press the button quickly several times but slowly and keep it down for a second or two.

• Satellite P300-1CN - system and the BIOS does not start

  Hello!

  I have a problem with my laptop Toshiba Satellite P300-1CN. When I start my laptop does not start in Windows.
  When I tried to go to BIOS, doesn't let me do as well. I can see only the Toshiba logo. When I press F2 or F12 I received the message:

  + Enter in the configuration. Please wait + or
  + Entering the MultiBoot Menu. Please wait +.

  I tried + ESC +++ Power Buton + then + key + F1. I can see all the information:
  + Phoenix Bios 4.0 release 6.1 +.
  + Cpu = 1 processor detected, cores per processor = 2 +.
  + Intel Core 2duo T5800 @ 2.00 GHz +.
  + 3070 M RAM passed system +.
  + 2048 KB L2 Cache +.
  + Shadow system bios +.
  + Video Bios shaded +.
  + Fixed disk 0: Toshiba MK2552GSK +.
  + ATAPICD; ROM DVDRom... +.
  + Mouse initialized +.
  Press F2 to enter Setup or press F12 to enter MultiBoot Menu selection.

  but after the computer laptop just gel but the processor is still running.

  I removed the HARD drive and tried to put different the a (work laptop) - still does not
  I removed the memory and tried to put different the a (work laptop) - still no job

  I have no idea what it is causing the problem.
  I have this laptop over a period of 2 months.

  Thank you.

  > Looks like I have to make a phone call to the Toshiba Support Centre
  You must enter in Toshiba authorized service provider contact such as suggested by Luke above
  All the details can be found on the Toshiba page. (the path above will point you to the ASP database)

• Equium M40X: I get to the banner of Toshiba, but Windows does not start

  When I start my 2 year old Toshiba Satellite M40X, I get to the banner of Toshiba, but Windows does not start. I tried using the recovery CD and it does not either.

  Any suggestions as to what could be the problem?

  Hello

  What do you mean with the banner of Toshiba? Did you mean the Toshiba splash screen that appears at the begging of the boot?

  Equium M40X successfully passed this screen?

  If the laptop is unable to switch to the home Toshiba screen then I presume that the BIOS has detected a hardware problem.
  In this case primarily the motherboard fails

  But if the laptop is able to spend the Toshiba start screen, the motherboard must be ok and only a 3rd device malfunction as HARD drive could cause this problem.

  Try to study a little