Erase a hard drive for Presario C714NR

Similar Questions

• I wiped drive hard need driver for presario cq50 215nr vista 32-bit ethernet?

  I wiped drive hard need driver for presario cq50 215nr vista 32-bit ethernet?

  I had a virus somehow, so I wiped my hard drive using a wipedisc and now I don't have access to the internet on this laptop I need a link to download a driver for my ethernet controller

  When you install the MCP77MV Chipset Driver NVIDIA nForce, your ethernet port should work after you restart your laptop.

• How do I completely erase the hard drive and reinstall everything for Windows 7?

  I want to completely erase a hard drive on a laptop, that I intend to use when traveling.

  Then I install windows 7 (which I bought) and my other programs

  Can I get step by step please

  Thank you

  Wanda Gill

  Some read to you... Installation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  But before you begin, make sure that your computer and the applications and the current programs are Windows 7 friendly...

  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15

  And check your programs here too...

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software

• How can I format / erase a partition vmfs on the HARD drive for later use by windows?

  Hi all

  I have a HARD drive to a virtual host formatted as a vmfs partition. I need to delete / erase this HARD drive vmfs partition because it will now be used in a Windows environment. Can someone explain please how can I remove vmfs partition so that it can be formatted in NTFS? Can be done in a Windows operating system like the current place of residence may have one easily accessible Linux or vmware?

  Thank you.

  vmTrekker

  Windows should be able to reformat a VMFS partition in the GUI. If this isn't the case, you can run the diskpart utility and erase the partition table on the disk.

  André

• ThinkPad R60 cannot install Windows XP After erasing the HARD drive using the lenovo diagnostic utility

  WinXP pro Setup cannot find that any installed HARD disk so cannot install windows. Unfortunately after many attempts to use rescue and recovery to restore the factory settings and for some reason constantly default... After leaving another utility popped up giving me the opportunity to erase the HARD drive and so I did... After fact as well and all I had was a blank screen, no windows more or no matter what utility to reinstall windows, then I used my winxp pro installation CD, but the program installation would continue not after a certain point by saying that the installation did not find any HARD disk installed. followed by "ensure that any disk HARD r turned on and correctly connected, and that no matter what material associated drive configured correctly, this may involve running a manufacturer provided diagnostic or Setup program. Clearly it took me by surprise. What was supposed to be a cut to white erase and reinstall now me baffled and angry. Formats the HDD of the solution? If so why didn't not the usefulness of lenovo do... If not, what is the problem? Someone help pls

  Welcome to the forum!

  Go into the BIOS (F1 at startup), set the "compatible" SATA mode (NO AHCI), then press F10 to save and exit, and you should be all set.

  Good luck.

• reformat and erase/wipe hard drive

  Hi friends,

  I'm about to make a donation or to throw my old Dell desktop that is running Windows XP, sp3 (what that is the possibility arises first ).  I'm sorry that I don't remember the name of the model (for the moment).  But anyway, what I understand, I need to delete all the data, to protect my private life of anyone who might want to use it after I'm done with it.

  The research I've done, looks like I need to uninstall and remove programs, documents, pictures, music, etc., as much as possible and record everything I want to keep a cd drive or usb.  Then to start the delete process, first I have to reformat the hard drive.  After that, I need to "sweep" it.  I guess I wouldn't be surprised of this paradoxical terminology, but it IS annoying.  I'm talking about it wiping of the process which does not remove anything, but rather replaces the disk, at least a few times, to have my most difficult to recover data .

  Could someone me directly to the appropriate instructions for reformatting the hard drive please?  Or if there is an article or something about this whole process, which you could link me to, that would be great.

  Also, I looked for a program to make wiping.  There are those who are free and more expensive.  I prefer free, unless they are just not worth it.  All of you have recommendations for wiping program?

  Actually, come to think of it, I could still be able to use the computer.  Once I refortmat hard drive, isn't that kind of start over with a clean slate as?  If I couldn't reinstall WinXP right back?   Or I wonder if I could install Win7?  My most recent computer running Win7, so I should have the cd somewhere.  Although this old computer has only 1.24 GB of ram.  So maybe not Win7, but even with XP, I could at least still use the printer that is connected to it.  (The printer and its software are probably too old to run on my newer computer.)  As long as I do not plan to use the internet, there is no security issues with this os to an old/old help... right?

  Thanks for your help

  Hi Brynn4,

  Just to add to the comments of rdunnill, I'm guessing that you can't pay for a new operating system for a computer that is worth less that the license will cost you. My suggestion would be to wipe the drive and perform a new installation of XP if you have the XP Dell installation disk. There are many free utilities that can erase the hard drive safely. You DO NOT need to uninstall anything before formatting the disk.

  Otherwise, I would restore the original hard disk image if you do not have a Dell XP disc.

  And Yes, I understand that Microsoft ends in favor of XP, but there are many people who use computers for non-critical tasks that would be happy to put more than a few miles on your old desktop computer.

• I had to erase my hard drive, lost everything, but I re-installed windows 7 and it would not accept my key.

  I had to erase my hard drive, lost everything, but I re-installed windows 7 and it would not accept my key, do I have to buy a new key?

  Original title: Activation of Windows 7?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Secondary hard drive for Satellite Pro P200-1DV

  Anyone know if it is possible to add a second hard drive for the P200-1DV?

  There is room inside the machine, but there is no connector?

  As I know the second HARD drive update is not possible because there is no available connectors. The universal laptop Briefcase belongs and it will be used for all models of laptops P200 and some of them come with 2 hard drives.

• Replacement hard drive for Portege P2010 - part number required

  Can someone tell me what is the part number for a replacement hard drive for Portege P2010 is? It has the latest version of the BIOS installed, if the capacity of the HARD disk can be greater than the original 30gig?

  Thank you

  Martin

  Hello Martin

  Unfortunately I was found no specific information. If I'm right, this unit needs 1.9 HDD and I think it can be much more expensive as 2.5 standard.

  Check it please this page http://www.laptopbits.co.uk/Database_files/Toshiba_Portege_2000_and_2010_series_spares.htm
  You will find a few pieces of upgrade for your device.

  Good bye

• Compatible hard drives for Portege 3480CT

  Hello

  I have a Portege 3480CT and I need to replace its 12 GB (IBM & reg Travelstar) drive hard internal since the former on a developed bad blocks. Now, I assumed that it would be relatively simple, but I was wrong.

  In any case, I got a replacement 2.5 "HD (this time a Hitachi Travelstar, 20 GB drive), but I couldn't make it work. I ran the program from IBM/Hitachi diagnosis and while the old 12 GB HDD is detected and removed ok, the 20 GB does not even get detected (i.e., seems that nothing is on the line of the IDE).

  It was suggested to me by IBM and Hitachi that there is a list of compatibility to their hard drives, and may not be supported (http://www.hitachigst.com/hdd/support/compatibility.htm), but I could not find my disc on their list (model is HTS424020M9AT00). Basically, what I want to know is what drives * are * compatible or what my problem with the laptop is otherwise.

  For more info, when I try to install Win2k, I get an ArcRead failure, probably because he thinks that the drive does not exist.

  Thank you.
  Stuart

  Hello

  I guess that there is problem with drive HARD and false parameter who decide if the HARD drive is the master or slave.

  In my opinion you should contact the Service partner to ask them which HDD is suitable for your device. You can also check on the net and picking up some information because there are a lot of different suppliers where you can buy the HARD drive. I also found information that it is possible to use the 40 GB HARD drive for your unit, but it must be built in by seller.

• Adding 3rd hard drive for HP Pavilion Elite m9250f

  I have a Pavilion Elite m9250f running Windows Vista Home 64 bit. The computer currently has two 500 GB hard drives for a total capacity of 1 TB. I would like to add a third drive to increase storage capacity.  I have a SATA to 2 to and cables. When I tried to install the new drive above the two existing disks, he did not slide smoothly. When I removed the already highest reader, I could slide the new drive into but the screws are not line up properly with the new drive. This leads me to believe that I can not install a third drive in the Bay. Is this a correct assumption?

  I have an available expansion Bay below the optical drive but am not sure that it is usable for a hard drive. If the use of the expansion Bay is possible, do I have to buy a hook or how to mount the drive in this space?

  If necessary, I can copy the data from the secondary drive on an external drive and replace it with the new drive. However, I need confirmation that the secondary is the player in the foreground of both in the hard disc enclosure.

  Thank you for your help.

  If the task under the existing optical Bay is open, just use an adapter to fill the space and to mount the drive in there.  Make sure of course that there is a power cord and a SATA port.

  Here is an example: http://www.newegg.com/Product/Product.aspx?Item=N82E16816119027

• Satellite A105-S4074 - which HARD drive for upgrade?

  I want to replace the Toshiba MK1234GSX (120 GB, 5400 RPM, SATA-150, 8 MB cache) hard drive on my A105-S4074 laptop with a bigger. My question is whether it is good to buy a Toshiba HDD no.

  Available on direct to my computer Toshiba laptop is only the following HARD disk:
  HDDR320I02X
  Toshiba 320 GB 2.5 "5400 RPM internal notebook hard drive - SATA"
  Capacity: 320 GB
  Interface: Serial ATA 150
  Speed: 5400 RPM
  Buffer size: 8 MB

  I wonder if such a 320 GB or 500 GB WD HARD or Momentus drive will work very well, for example
  -Western Digital 320 GB / 500 GB Scorpio blue SATAII 5400 RPM 2.5 IN. 8 MB in bulk / OEM hard drive (WD3200BEVT/WD5000BEVT
  -Seagate Momentus 5400.6 320/500 GB 5400 RPM / MIN SATA 3 GB/s 8 MB Cache 2.5 inch internal NB Hard Drive (ST9320325AS/ST9320325AS)

  Also, is it wise purchase a 7200 RPM HARD drive for this laptop? Would this work?

  Thank you

  Hello

  First on interface SATA there is no capacity limit. This means that you can buy each HARD drive with SATA interface and it should work fine.

  It is also irrelevant if you buy a Toshiba, Western Digital, etc. There is not much difference between the models. It of your choice what you buy! ;)

  Theoretically, 7200 RPM HARD drive should work but don t forget that they produce more heat and need more battery power. 5400 RPM should be sufficient for most applications.

  Good bye

• iMac 10.4 - utility disk erasing option is grayed out. How can I erase my hard drive?

  Hello

  I have an iMac 10.4 - utility option in the disk, the delete option is greyed out. How can I erase my hard drive?

  Hi GJuss,

  What is your boot volume? If so, you will not be able to.

  It is an external hard drive?

  Kind regards

  BleverCastard

• How to add a 2nd hard drive for HP Pavilion DV7!

  How to add a 2nd hard drive for HP Pavilion DV7-3165DX, product # WA794UA or WA794UAR.

  (1) classification of the HDD, hard drive, hardware kit. Disc kit HARD material includes mounting rails, static shield, screws, insulators in rubber and SATA cable from the motherboard. Check your model & product # to ensure compatibility.

  Material of parts HP HDD Kit 517639-001 for DV7-3165DX product # WA794UA and WA794UAR.

  (2) training of consult - Windows 7 PDF, table of contents, 7 replacing a drive in secondary hard drive Bay. This will show you how to install a 2nd HARD drive in an HP DV7.

  Readers - Windows 7 PDF

  (3) to select a Windows 7 computer, select the installed HDD, Format (if not already formatted).

  (4) if the drive HARD does not appear in Windows 7 under computer, go to the Start Menu, find programs and files, enter "Computer management", select storage, disk (Local) management, look for the 2 HARD drive Bay (should appear as disk 1, Bay 1 HARD drive should show as disk 0), Format of the 2nd HARD drive (the one that you just installed).

  Update: I have the 2nd HDD (WD 1 TB) installed, Windows recognize now after completing the steps I mentioned in step 4, Format with default allocation NTFS 931,51 GB free, 118 MB USED to put in shape. Format exFAT to allocation by default 931,51 GB free, 1 MB used to put in shape. I chose NTFS format to reduce the fragmentation of the file.

  My solution.

• new hard drive for laptop

  I have a laptop dv7-3140el and HD samsung HM641JI 640GB 2.5 "SATA 5400 RPM (to replace car failure). To buy a new hard drive I have to take the same or I can take 7200 RPM instead of 5400? What technical specifications should I look for when buying a hard drive for computer laptop dv7-3140el? I wouldn't make a bad purchase!

  Sorry for my bad English

  Hello

  Here are a few points to note when replacing your HARD drive:

  You are not limited to any particular drive manufacturer.

  The speed of rotation of the disc can be 5400 RPM or 7200 RPM

  The new drive HARD should be at least the same capacity (or slightly more is okay) as the original drive - mounting a drive smaller than the original often causes risks with recovery media.

  The player at the link below is an example of one that would be perfect for your laptop.

  750 GB hard drive for laptop.

  If necessary, the procedure to replace the hard drive begins on Page 47 of your maintenance & Service Guide.

  Kind regards

  DP - K