eror 20079 during the parameter base control
I'm doing based parameter théorie control (e.g. If data greater or equal to 5 valves must be closed for 2 seconds and then open). what I've done I have attached as bmp file. his Don eroor 20079 Daqmx read error. Please guide me
The way that you described how VI looks are different, first, do the initialization outside the loop. You get the error may be due to the initialization of every time when the appliance is already initialized. logic of 2 seconds also not good.
Tags: NI Software
Similar Questions
-
Hello
I use a "Enum control" on the façade of an executable application built with application builder for LabVIEW 2013 full professional development system. I want Enum control remains activated prior to execution of this request so that I can choose any value from the list of available numeric values, but when I run this application; Enum control should become disabled so that the user can not select another value in the list of data during application execution values so that the default setting remains unchanged during the execution of this application. Enum control must also be activated when the application is stopped/abandoned so that the user can select any value.
Could someone pls suggest a solution to this problem? If I select the active state' to 'Disabled' in appearance tab then all listed values becomes disabled.
Concerning
Jamal
I suggest to use the node property of persons with reduced mobility. You can then disable the enum at the beginning of the program and then activate it in the judgment.
-
Message "do not power down during the update"control panel screen not fade.
Product name: HP ENVY 100 e - All - in - One Printer D410a
Product no.: CN517A
The message "Do not power down during the update" on the control panel of the printer refused to erase and remained perpetually disaloowing acess the Menu home for other actions as photocopies etc.
I see. I found this utility that will help you to solve the problem. It seems the printer lost connectivity during an update firmware and glitch out. The utility should take care of it. Let me know what happens.
-
dbAdapter fails during the call to procedure package oracle object type in the parameter out
JDeveloper 1.1.1.6
Oracle 11g
Existing package procedure is defined with the table of objects in input parameters and.
Package myPackage
procedure processRecon (numero_projet VARCHAR2,
INST_ID select NUMBER,
recon_type VARCHAR2,
gis_design_stock GMPVT. GMPVT_GIS_DESIGN_STOCK_T,
stock_uop GMPVT. GMPVT_STOCK_CODES_T,
x_status OUT VARCHAR2,
x_escalation OUT VARCHAR2,
x_recon_error ON GMPVT. GMPVT_GIS_RECON_ERR_T) IS
GMPVT. GMPVT_GIS_RECON_ERR_T is an array of GMPVT objects. GMPVT_GIS_RECON_ERR, who has 12 fields including the new I added it.
I have added a new field to the GMPVT object. GMPVT_GIS_DESIGN_STOCK, where GMPVT. GMPVT_GIS_DESIGN_STOCK_T is a table of GMPVT. GMPVT_GIS_DESIGN_STOCK, no problems encountered during the test.
Next, I added a new field for the object of type GMPVT. GMPVT_GIS_RECON_ERR, the following error below occurs when the DBAdapter is called
< Summary > Exception occurred when the link was invoked. Exception occurred during invocation of the JCA binding: "JCA binding run operation 'processStockRecon' failed due to the reference: Interaction processing error." Error in the processing of applications from running. GMP_SOA_RECON_PKG. Interaction of the PROCESSRECON API. An error occurred during the processing of the interaction to invoke APPS. GMP_SOA_RECON_PKG. PROCESSRECON API. Cause: java.lang.ArrayIndexOutOfBoundsException: 12 check to make sure that the XML file containing the data of the parameter matches the parameter definition in the XSD. This exception is considered non reproducible, probably due to an error of modeling. ". The called JCA adapter threw an exception of resource. Please review the error message above carefully to determine a resolution. < / Summary >
I confirmed that the XSD for the stored procedure has in fact change, which has been generated by JDeveloper as I refreshed the database adapter.
The statement "Cause: java.lang.ArrayIndexOutOfBoundsException: 12" I can't that assume somehow SOA has 12 parameters but the 12 setting was not saved.
Any thoughts on what I might be missing. I can provide more information if necessary.
Hello
This problem has been resolved. Not deployed SOA composite and then deployed to the server of the SOA. For some reason, SOA has been either you see does not changes in the file XSD (cached?) or the XSD was not get updated.
Thank you
-
During the installation of Flash Player, I get the prompt to close the customer control panel. What is and how it close?
This link to a thread on this forum about Adobe Flash Player explains how to kill (strong word) the customer dashboard:
I assume you are using a Mac.
-
Don't vSphere replication create control points which can be selected during the failover?
Don't vSphere replication create control points which can be selected during the failover? Or is the latest version of replication, the only option to failover?
Thank you
-MattG
No, this isn't
You CAN do this with EMC RecoverPoint (although not on a per VM level).
-
Application of system basis during the Win7 update driver
In update Vista Win7 and suite Assistant update Toshiba all seem to go very well and then just before you start the installation of Win7 it ask the driver base system.
I don't know where it is or how to get it, resulting in my being stuck between the facilities.It must be card smart card driver reader.
Can you please test? -
Is there a way to detect the mouse during the event for the controls within a tab control?
I need to change the mouse pointer when it moves on controls that are found in the tabs.
Now when the mouse passes over the tab, LABVIEW does not detect the saperately of controls for the mouse over event.
Is there a way to do what I intend to do?
Your problem is with the Panel.Controls [] property. It does not return the controls that are inside containers (tables, tabs, groups) and returns only the container itself. As illustrated by Sam, if you want the references to the controls in the tab, you must get the references to the pages and get the controls on each page and add them to your original table and do this recursively.
You can either write a VI to do this (or search for it. There was posted here screw that analyzes recursively the FP for all control references) or everything just statically for this control a tab and move. There is also a VI delivered with LV that can help you with this, but I suggest that you not use, because it will be difficult to operate if you generate an EXE file.
And I also recommend the Tool of Capture of Code.
-
11i/R12 connection at the base of the machine during the Installation of VMWare host.
Hello people,
I installed 11i and R12 on VMWare. My host in Windows XP operating system.
11i details-
VMWare/Guest OS - Windows XP
Version - 11.5.10.2
R12 Details-
VMWare/Guest OS - Red Hat Enterprise Linux 5.3
Version - 12.1.1
Everything works fine on the VMWare OS application and database (sqlplus).
The problem is that I am not able to connect to the data base (11i/R12) from the host machine. I am successfully able to run the application from the host machine after you put the entry in the file "hosts".
To connect to the database, I have installed the Oracle 9i on the host machine client and put the entry in the TNSNAMES file. ORA generated by 11i/R12, but even in doing so I am not able to connect to the database.
Is there a way I can connect to the database (installed on VMWARE) of the HOST Machine.
I've seen a single installation on VMWARE, where we are able to connect to the database from the HOST machine.
Concerning
ThémansHello
Review the troubleshooting document and see if it helps.
Kind regards
Hussein -
Hi all
I use APEX 3.1.1 and have the following problem: I have a JS function in my application, which generates a URL by using the provided parameters. His signature might look like:
function xxx (p_param_item, p_session, p_app_process, p_app_id)
Yes, I use this to call for a process on demand application (AJAX magic ;)
The problem is that when I call a page using item & APP_SESSION. for the 3rd parameter, it seems that for some reason JS receives a different value (I checked myself put an alert and displays the value of the parameter and the & APP_SESSION. string substitution).
I know will say you: + "then why don't you use & APP_SESSION.» Instead? "+ but the thing is, my JS code in a separate file, and for some reason, APEX does not replace this string on this separate file.
Then... of suggestions? Ideas? New approaches?
Thank you all in advance for your help.
Kind regards
A & iacute; PromHello
In an external file, you can use-
$x('pInstance').value
or
$v('pInstance')
(depending on your version of APEX)
to reference the value of the current session.
Hope this helps,
John.
--------------------------------------------
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone! -
Following error message encountered when installing SSO64 bits on Windows Server 2008 R2 Standard 64-bit edition.
Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC.
[12:40:34 of Info] List MessageBox with text: Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC. Return code: 1I tried to reinstall VC ++ 2005 SP1 Redistributable, but it did not work.
I tried to rename a folder for vc ++ in the winsxs folder, but without permission to do so.
Here's the Setup log:
= Recording started: 01/03/2012-12:40:11 Build type: SHIP UNICODE 5.00.7600.00 appeal process: C:\Users\SA_KPN~1\AppData\Local\EBZ28334.tmp\Setup.exe =.
MSI (c) (C0:58) [12:40:11:525]: Resetting cached policy values
MSI (c) (C0:58) [12:40:11:525]: value of strategy Machine 'Debug' is 0
MSI (c) (C0:58) [12:40:11:525]: * RunEngine:
Product: SSO x64\SSO64\SSO64.msi
Action:
Command line:
MSI (c) (C0:58) [12:40:11:525]: Client and UI is none or basic: full installation running on the server.
MSI (c) (C0:58) [12:40:11:525]: grabbed execution mutex.
MSI (c) (C0:58) [12:40:11:525]: Cloaking enabled.
MSI (c) (C0:58) [12:40:11:525]: attempt of activation of all disabled privileges before calling install on server
MSI (c) (C0:58) [12:40:11:525]: meter is incremented to disable the stop. Counter after increment: 0
MSI (s) (C AC:3) [12:40:11:525]: running the installation inside the multi-package transaction \SSO x64\SSO64\SSO64.msi
MSI (s) (C AC:3) [12:40:11:525]: grabbed execution mutex.
MSI (s) (AC:64) [12:40:11:525]: Resetting cached policy values
MSI (s) (AC:64) [12:40:11:525]: value of strategy Machine 'Debug' is 0
MSI (s) (AC:64) [12:40:11:525]: * RunEngine:
Product: SSO x64\SSO64\SSO64.msi
Action:
Command line:
MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 0
MSI (s) (AC:64) [12:40:11:540]: value of strategy Machine 'DisableUserInstalls' is 0
MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 1
MSI (s) (AC:64) [12:40:11:540]: SRSetRestorePoint is ignored for this transaction.
MSI (s) (AC:64) [12:40:11:540]: disable the stop against the decrement. If counter > = 0, will be denied the stop. Counter after decrement: 0
MSI (s) (AC:64) [12:40:11:540]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3:2
MSI (s) (AC:64) [12:40:11:571]: file will have the applied safety of OpCode.
MSI (s) (AC:64) [12:40:11:587]: disable the stop against the decrement. If counter > = 0, will be denied the stop. Counter after decrement:-1
MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: Verifying package--> 'SSO x64\SSO64\SSO64.msi' against the software restriction policy
MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi has a digital signature
MSI (s) (AC:64) [12:40:21:603]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi is allowed to run at the level of authorization 'unlimited '.
MSI (s) (AC:64) [12:40:21:603]: dialogue of end not activated
MSI (s) (AC:64) [12:40:21:603]: original ==> SSO x64\SSO64\SSO64.msi packing
MSI (s) (AC:64) [12:40:21:603]: we're running out of ==> C:\Windows\Installer\1ebf5f91.msi package
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: replacements of compatibility mode properties found.
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
MSI (s) (AC:64) [12:40:21:619]: MSCOREE already loaded, using the loaded copy
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'TransformsSecure' is 1
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisablePatch' is 0
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'AllowLockdownPatch' is 0
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableLUAPatching' is 0
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableFlyWeightPatching' is 0
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
MSI (s) (AC:64) [12:40:21:619]: transformations are not secure.
MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding MsiLogFileLocation property. Its value is ' C:\Users\acc\AppData\Local\Setup(030112 124011) .log.
MSI (s) (AC:64) [12:40:21:619]: command line: ADDLOCAL = froot, server, SSOMMC, Admin, Pwdsync INSTALLDIR = c: Files\Enterprise Single Sign - dans\ FILESINUSEERROR = CURRENTDIRECTORY=C:\Users\acc\AppData\Local\EBZ28334.tmp CLIENTUILEVEL = 3 MSICLIENTUSESEXTERNALUI = 1 CLIENTPROCESSID = 3776
MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding PackageCode property. Its value is '{824AA89B-CCCC-4D40-A6D3-71DF21FEE110} '.
MSI (s) (AC:64) [12:40:21:619]: Product Code passed to Engine.Initialize: "
MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties before transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties after transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
MSI (s) (AC:64) [12:40:21:619]: unregistered product: first start installation
MSI (s) (AC:64) [12:40:21:619]: product {F89B22BC-2768-4237-B300-5CFA52D9AC84} is not supported.
MSI (s) (AC:64) [12:40:21:619]: MSI_LUA: invites of credentials not required, the user is an administrator
MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding ProductState property. Its value is '-1'. '.
MSI (s) (AC:64) [12:40:21:619]: entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (AC:64) [12:40:21:634]: value 'SearchOrder' user policy is 'nmu '.
MSI (s) (AC:64) [12:40:21:634]: adding new sources is allowed.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding PackagecodeChanging property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:634]: Package name extracted from package path: 'SSO64.msi '.
MSI (s) (AC:64) [12:40:21:634]: package be registered: "SSO64.msi."
MSI (s) (AC:64) [12:40:21:634]: Note: 2 1: 2262: AdminProperties 3:-2147287038
MSI (s) (AC:64) [12:40:21:634]: Machine policy value 'DisableMsi' is 1
MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'AlwaysInstallElevated' is 0
MSI (s) (AC:64) [12:40:21:634]: "AlwaysInstallElevated" user policy value is 0
MSI (s) (AC:64) [12:40:21:634]: product installation will be high because the user is admin, and the product is to be installed by computer.
MSI (s) (AC:64) [12:40:21:634]: the product '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' is running with elevated privileges: product is affected.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding ADDLOCAL property. Its value is "froot, server, Admin, SSOMMC, Pwdsync.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding INSTALLDIR property. Its value is "C:\Program Files\Common Files\Enterprise Single sign-dans\ '."
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CURRENTDIRECTORY property. Its value is 'C:\Users\acc\AppData\Local\EBZ28334.tmp '.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MSICLIENTUSESEXTERNALUI property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTPROCESSID property. Its value is "3776".
MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (AC:64) [12:40:21:634]: MANAGER of REBOOT: disabled by the property MSIRESTARTMANAGERCONTROL. Windows Installer uses the built-in functionality of FilesInUse.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MsiSystemRebootPending property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:634]: TRANSFORMS property is now:
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding VersionDatabase property. Its value is "200".
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Favorites
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Network shortcuts
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Documents
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Printer shortcuts
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Recent
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\SendTo
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Templates
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Local
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Pictures
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start start\program
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu\Programs\Administrative C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start of Directors
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start start\program
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Desktop
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
MSI (s) (AC:64) [12:40:21:650]: Note: 1: 2898 2: MS without Serif 3: MS without Serif 4: 0 05:16
MSI (s) (AC:64) [12:40:21:650]: MSI_LUA: the MsiRunningElevated of the parameter property to 1 because the installation is already running high.
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding MsiRunningElevated property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding privileged property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding USERNAME property. Its value is 'KPN '.
MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding COMPANYNAME property. Its value is 'KPN '.
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding a DATABASE property. Its value is 'C:\Windows\Installer\1ebf5f91.msi '.
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding OriginalDatabase property. Its value is "SSO x64\SSO64\SSO64.msi...............................
................................
Property (S): GPTSupport = 1
Property (S): OLEAdvtSupport = 1
Property (S): ShellAdvtSupport = 1
Property (S): MsiAMD64 = 6
Property (S): Msix64 = 6
Property (S): Intel = 6
Property (S): PhysicalMemory = 3840
Property (S): VirtualMemory = 4312
Property (S): AdminUser = 1
Property (S): MsiTrueAdminUser = 1
Property (S): LogonUser = acc
Property (S): UserSID = S-1-5-21-1305377269-4159824490-449157577-297538
Property (S): UserLanguageID = 1033
Property (S): ComputerName = W1613
Property (S): SystemLanguageID = 1033
Property (S): ScreenX = 1024
Property (S): ScreenY = 768
Property (S): CaptionHeight = 19
Property (S): BorderTop = 1
Property (S): BorderSide = 1
Property (S): TextHeight = 16
Property (S): TextInternalLeading = 3
Property (S): ColorBits = 32
Property (S): TTCSupport = 1
Property (S): Time = 12:40:37
Property (S): Date = 01/03/2012
Property (S): MsiNetAssemblySupport = 2.0.50727.4927
Property (S): MsiWin32AssemblySupport = 6.1.7600.16385
Property (S): RedirectedDllSupport = 2
Property (S): MsiRunningElevated = 1
Property (S): The privilege = 1
Property (S): Name of USER = KPN
Property (S): COMPANYNAME = KPN
Property (S): basis of DATA = C:\Windows\Installer\1ebf5f91.msi
Property (S): OriginalDatabase = SSO x64\SSO64\SSO64.msi
Property (S): UILevel = 2
Property (S): MsiUISourceResOnly = 1
Property (S): Preselected = 1
Property (S): ACTION = INSTALL
Property (S): AccountAuthenticatedUsers = authenticated users
Property (S): AccountCreatorOwner = CREATOR OWNER
Property (S): AccountPowerUsers = power users
Property (S): AccountUsers = Users
Property (S): ROOTDRIVE = D:\
Property (S): CostingComplete = 1
Property (S): OutOfDiskSpace = 0
Property (S): OutOfNoRbDiskSpace = 0
Property (S): PrimaryVolumeSpaceAvailable = 0
Property (S): PrimaryVolumeSpaceRequired = 0
Property (S): PrimaryVolumeSpaceRemaining = 0
Property (S): INSTALLLEVEL = 1
Property (S): Complus_XML_Data =Property (S): SOURCEDIR = SSO x64\SSO64\
Property (S): SourcedirProduct = {F89B22BC-2768-4237-B300-5CFA52D9AC84}
Property (S): ProductToBeRegistered = 1
MSI (s) (AC:64) [12:40:37:260]: Note: 1: 1708
MSI (s) (AC:64) [12:40:37:260]: product: Microsoft Enterprise Single Sign-On - the Installation operation failed.MSI (s) (AC:64) [12:40:37:275]: Windows Installer installed the product. Product name: Microsoft Enterprise Single Sign-On. Product version: 6.0.0245.0. Product language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (AC:64) [12:40:37:275]: see clean files/packages, if there
MSI (s) (AC:64) [12:40:37:275]: MainEngineThread returned 1603
MSI (s) (C AC:3) [12:40:37:275]: sequence number number for this installation system restore.
= Logging stopped: 01/03/2012 12:40:37 =.
MSI (s) (C AC:3) [12:40:37:275]: strategy user 'DisableRollback' is 0
MSI (s) (C AC:3) [12:40:37:275]: policy value 'DisableRollback' Machine is 0
MSI (s) (C AC:3) [12:40:37:275]: meter is incremented to disable the stop. Counter after increment: 0
MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
MSI (s) (C AC:3) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop. Counter after decrement:-1
MSI (s) (C AC:3) [12:40:37:275]: restoration of the environment variables
MSI (s) (C AC:3) [12:40:37:275]: object to destroy RemoteAPI.
MSI (s) (C AC:3) [12:40:37:275]: end of thread Custom Action Manager.
MSI (c) (C0:58) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop. Counter after decrement:-1
MSI (c) (C0:58) [12:40:37:275]: MainEngineThread returned 1603
= Recording stopped: 01/03/2012 12:40:37 =.Hello Philippe Gupta.
Since the question you posted is on a Windows Server 2008-based computer, the question would be better suited on the TechNet support forum. Then I suggest you to post the question on the following link.
-
Resolution 1: Install the stand-alone package for the service pack instead of using Windows Update to install the Service Pack
Click here to show or hide detailed information
Note If you have already tried to install the stand-alone package for the service pack and you have encountered this problem, skip this resolution and go to resolution 2.
If you don't know if you've tried to install the stand-alone package for the service pack, it is recommended that you try the following steps to install the stand-alone package for the service pack. By using the stand-alone package to install the service pack, you eliminate installation issues that may be related to Windows Update. This simplifies the troubleshooting process.
How to obtain the stand-alone package for the service pack
To obtain the service pack, see the following articles in the Microsoft Knowledge Base, depending on your operating system, and then look for the option to install the service pack from the Microsoft Download Center.
935791 how to obtain the latest Windows Vista service pack
968849 how to obtain the latest service pack for Windows Server 2008
Solution 2: Run the system update readiness tool
Click here to show or hide detailed information
System Update tool checks your computer and trying to resolve certain conditions that can interfere with the installation of the updates or other software. However, before you download the tool, you must determine whether your computer is running a 32-bit version or a 64 bit version of the Windows Vista operating system. If your computer is Windows Vista installed, and you know which version you are using, go to the How to download the system update readiness toolsection ".» If you are unsure which version your computer has installed, follow these steps:
1. click on Start
Collapse this includes this image
.
2. in the Search box, type System, and then click System in the programs list.
Collapse this includes this image
The operating system is displayed as follows:
- For a 32 - bit version operating system, 32-bit operating system appears for the system type under System.
- For a 64 - bit version operating system, 64-bit operating system appears for the system type under System.
Collapse this includes this image
After you determine which version of Windows Vista, your computer is running, download system update readiness tool.
How to download the system update tool
You can click here to download the preparation tool system update from the following Microsoft Download Center Web site. The following files are available for download from the Microsoft Download Center:
Collapse this includes this image
Download the System Update Readiness Tool for Windows Vista (KB947821) package now.
Collapse this includes this image
Download the update tool for Windows Vista x 64 (KB947821) package now.
Collapse this includes this image
Download the System Update Readiness Tool for Windows Server 2008 (KB947821) package now.
Collapse this includes this image
Download the System Update Readiness Tool for Windows Server 2008 x 64 (KB947821) package now.
Collapse this includes this image
Download the system update for the systems Itanium (KB947821) package.
After you download and run the system update readiness tool, restart your computer. Then, immediately try to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site:
http://www.Microsoft.com/downloads
For more information about the update of the system tool, click on the numbers below to view the articles in the Microsoft Knowledge Base:
947821 description of the update for Windows Vista and Windows Server 2008 system preparation tool
Resolution 3: Close or disable any applications that may be running, restart the computer and then install the service pack
Click here to show or hide detailed information
Important These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system. We recommend that you use this process only if you really need this process.
During installation, one of the most frequent causes of failure occurs when a third-party application holds open a file or locks a file that the service pack installer should use. For example, an application third-party antivirus or antispyware may cause this problem. To minimize this risk, follow these steps:
1. close all applications and restart your computer.
2. Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps:
a. right-click on the icon of the third-party program.
b. click Close, disable, outputor an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.
3. as soon as you close the antivirus or the antispyware software, try to click here to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site.
4. After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.
If your problem is still not resolved, you can try the steps of troubleshooting on your own, or you can contact Microsoft technical support.
Resolution 4: Uninstall security applications, restart the computer and then install the service pack
Click here to show or hide detailed information
Important These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system. We recommend that you use this process only if you really need this process.
A third-party security application (for example, an antivirus application, a firewall, or antispyware software) can still be causing the installation fails, even though you tried to disable the application. The Windows Vista SP1 installation requires several restarts of the computer, and the security application may be reload after the first reboot. Applications that provide registry repair features may also cause the installation to fail.
You can uninstall your third-party security application before you install the service pack. However, you should do this only if you are positive that you can reinstall the application as soon as the service pack installation is complete. To reinstall the third-party security application, you'll need either the original installation media for the application, or you need the original download. You may also need a product key to reinstall the third-party security application.
If you are sure that you can reinstall the third-party application, uninstall the application from the programs and features item in Control Panel. To do this, follow these steps:
1. close all applications and restart your computer.
2. Once your computer has restarted, click Start
Collapse this includes this image
.
3. in the find what box, type programs.
4. click on programs and features.
5. click on the name of the security program that you want to uninstall.
6. click on Uninstall.
7. After you have uninstalled the program, restart the computer.
8. try to click here to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site.
Note You have uninstalled your security software, and your computer is more vulnerable to attack by malicious users or by malicious software such as viruses. We recommend that you do not surf the Web, use e-mail, or use instant messaging, up to what you have done to solve the problem, and you have reinstalled your security software.9. After completing the installation of Windows Vista SP1, reinstall the security program that you uninstalled in the previous steps.
* All of these resolutions were conducted, but still having trouble running SP1 & SP2. It's a problem of installation and after the installation of Service packs 1 & 2 times. I have a SYSTEM of 32-bit operating systems. KB947821 analytical TOOL has also been installed!, by following the instructions in res 2. Security / Antivirus has also been disabled in accordance with the instructions of res 3 & 4. Service packs Download but will not work!
Get help the community?
Hello DavidCarmichael,
Thank you for your message. I see that you have already run the system update readiness tool. Feel free to skip step 1, but follow-up on the rest of the below troubleshooting steps:
1. According to your architecture of Windows 7, download / install and run the tool update system - CheckSur you can download the tool from the links below depending on your system type.
Download the tool update system (64-bit)
Download (32-bit) system update readiness tool
2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator
Inside the command prompt, type sfc/scannow
For more information regarding the file system checker.
* If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
3. once the SFC is finished, check your hard drive for errors.
4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.
5. perform a Startup Repair, when starting, try to install the Service Pack.
Please let us know the results of each utility. We can't wait to hear back on your part.
See you soon
-
Are windows puts an administrator account during the installation?
Are windows puts an administrator account during the installation? I'm the only admin user on windows, but I can't do much like I said I need admin which remove, access or open the files.
I use windows 7
Original title: Admin account
You must be an administrator, because the first account you create during Setup must be an administrator-level account. There is also a built-in account (with a current name 'administrator'), but it is disabled, unless you are in Safe Mode (restart hold F8 for safe mode). As soon as the integrated, you can sign in and upgrade your real account on a daily basis at the level of administrator control panel.
Note: even if you are an administrator, some processes will ask confirmation continue. This is recommended because it prevents the virus of piracy of your profile and using your account.
-
Cisco Aironet 1262N stuck during the startup process
I'm banging my head against the wall, trying to figure out why my AIR-AP1262N-A-K9 will start all the way. He'll get all the way to initiate interfaces and stop. I can never get to control the CLI. This is my first time with a cisco ap but everything I read it very easy sewing.
This unit from what I understand will work on its own with no controller. Therefore, it is called a "stand-alone" model Yet he seems to be looking for something to complete during the boot. Below the out put for starting. The last line is where it stops.
If anyone can help me I would be very happy.
WRDTR, CLKTR r: 0x8200083f 0x40000000
r RQDC, RFDC: 0 x 80000033 0 x 00000212using the values from the eeprom
WRDTR, CLKTR: 0X8200083F 0X40000000
RQDC, RFDC: 0 X 80000033 0 X 00000212MCNG ddr static values of the eeprom series
init done DDRIOS Bootloader - start System.
Flash CHIP: Numonyx P33
Check for more deleted blocks
................................................................................
................................................................................
................................................................................
......
XMODEM file system is available.DDR used values of the system serial eeprom.
WRDTR, CLKTR: 0X8200083F, 0X40000000
RQDC, RFDC: 0 X 80000033, 0 X 00000212PCIE0: the connection is established.
PCIE0: VC0 is active
PCIE1: the connection is established.
PCIE1: VC0 is active
PCIE 64-bit devices
PCIEx: initialization done
flashfs [0]: 147 files, 7 folders
flashfs [0]: 0 orphaned files, orphaned directories 0
flashfs [0]: Total number of bytes: 31739904
flashfs [0]: bytes used: 6435328
flashfs [0]: available bytes: 25304576
flashfs [0]: flashfs fsck took 9 seconds.
The system eeprom read cookie series... Fact
MAC Ethernet address of base: 7 c: ad: 74:93:36:ba
Waiting for auto-negotiation complete PHY... TIME-OUT!
Ethernet link is down.
Error: Speed RGMIIThe system has encountered an error during initialization
the Ethernet port.
The system is ignoring the error and continue to start.
If you stop the system startup process, what follows
orders will be re - initialize Ethernet, TFTP and finishing
loading the operating system software:ether_init
tftp_init
bootfor 22 seconds
process_config_recovery: set the IP address and the default config 10.0.0.1
process_config_recovery: image recoveryPA:
WRDTR, CLKTR r: 0x8200083f 0x40000000
r RQDC, RFDC: 0 x 80000033 0 x 00000212using the values from the eeprom
WRDTR, CLKTR: 0X8200083F 0X40000000
RQDC, RFDC: 0 X 80000033 0 X 00000212MCNG ddr static values of the eeprom series
init done DDRNormal running Memtest...
Past.
IOS Bootloader - start System.
Flash CHIP: Numonyx P33
Check for more deleted blocks
................................................................................
................................................................................
................................................................................
......
XMODEM file system is available.DDR used values of the system serial eeprom.
WRDTR, CLKTR: 0X8200083F, 0X40000000
RQDC, RFDC: 0 X 80000033, 0 X 00000212PCIE0: the connection is established.
PCIE0: VC0 is active
PCIE1: the connection is established.
PCIE1: VC0 is active
PCIE 64-bit devices
PCIEx: initialization done
flashfs [0]: 147 files, 7 folders
flashfs [0]: 0 orphaned files, orphaned directories 0
flashfs [0]: Total number of bytes: 31739904
flashfs [0]: bytes used: 6435328
flashfs [0]: available bytes: 25304576
flashfs [0]: flashfs fsck took 9 seconds.
The system eeprom read cookie series... Fact
MAC Ethernet address of base: 7 c: ad: 74:93:36:ba
Waiting for auto-negotiation complete PHY... TIME-OUT!
Ethernet link is down.
Error: Speed RGMIIThe system has encountered an error during initialization
the Ethernet port.
The system is ignoring the error and continue to start.
If you stop the system startup process, what follows
orders will be re - initialize Ethernet, TFTP and finishing
loading the operating system software:ether_init
tftp_init
boot"Loading Flash:/ap3g1-k9w7-mx.124-25d.JA1/ap3g1-k9w7-mx.124-25d.JA1"...### ".
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
###############################################################################File "flash:/ap3g1-k9w7-mx.124-25d.JA1/ap3g1-k9w7-mx.124-25d.JA1" uncompressed one
ND installed, point of entry: 0x4000
execution of...
ENET stoppedLegend restricted rights
Use, duplication, or disclosure by the Government is
subject to such restrictions as set out in paragraph
(c) Commercial - limited computer software
The rights to FAR clause 52.227 - 19 and subparagraph s
(c) (1) (ii) rights to technical and computer data
Clause of DFARS 252.227 - 7013 section software.Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706Software Cisco IOS, C1260 Software (AP3G1-K9W7-M), Version 12.4 (25 d) JA1, COMMUNICATED
SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Updated Friday, August 11, 11 02:07 by prod_rel_teamProceed with the initialization of the system
Proceeding to unmask interrupts
Initialization of flashfs...
Flash CHIP: Numonyx P33
Check for more deleted blocks
................................................................................
................................................................................
................................................................................
......flashfs [1]: 147 files, 7 folders
flashfs [1]: 0 orphaned files, orphaned directories 0
flashfs [1]: Total number of bytes: 31481856
flashfs [1]: bytes used: 6435328
flashfs [1]: available bytes: 25046528
flashfs [1]: flashfs fsck took 7 seconds.
flashfs [1]: initialization complete.
flashfs [2]: 0 files, directories 1
flashfs [2]: 0 orphaned files, orphaned directories 0
flashfs [2]: Total number of bytes: 11999232
flashfs [2]: used bytes: 1024
flashfs [2]: available bytes: 11998208
flashfs [2]: fsck flashfs took 1 seconds.
flashfs [2]: initialization complete... done Initializing flashfs.Radio0 presents 8364B 8000 B8020000 0 B8030000 10
Present Radio1 8364B 8000 B0020000 0 B0030000 C
Waiting for auto-negotiation complete PHY... TIME-OUT!
Ethernet link is down.This product contains cryptographic features and is under the United States
States and local laws governing the import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third party approval to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. laws and local countries. By using this product you
agree to comply with the regulations and laws in force. If you are unable
to satisfy the United States and local laws, return the product.A summary of U.S. laws governing Cisco cryptographic products to:
http://www.Cisco.com/WWL/export/crypto/tool/stqrg.htmlIf you need assistance please contact us by mail at
[email protected] / * /.processor of Cisco AIR-AP1262N-A-K9 (PowerPC460exr) (revision B0) with 81910 K/4
9152K bytes of memory.
Card processor ID FTX1716E2DN
PowerPC460exr CPU 666 Mhz, the 0x18A8 revision number
Last reset of tension
1 gigabit Ethernet interface
2 802.11 radios32K bytes memory simulated by flash not volatile configuration.
Basic Ethernet MAC address: 7 c: AD:74:93:36:BA
Part number: 73-12175-06
Kit numbered PCA: 800-32268-06
Revision number of PCA: B0
Serial number of PCB: FOC17106662
Top Assembly part number: 800-33866-02
Top of page the Assembly serial number: FTX1716E2DN
Top of page revision number: A0
Product/model number: AIR-AP1262N-A-K9Press RETURN to get started!
* 00:00:09.481 Mar 1: % SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: crypto IOS FIPS t auto
is spent
* 00:00:09.490 Mar 1: * CRASH_LOG = YES* 00:00:09.490 Mar 1: PCIE 64-bit devices
* 1 Mar 00:00:09.789: soap_extern_intr_dispatch: no handler for UIC2 intrno 12 l
n level 4
* 1 Mar 00:00:10.088: soap_extern_intr_dispatch: no handler for UIC2 intrno 12 l
n level 4
* 00:00:12.966 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS auto
test successful Dot11Radio interface 0
* 00:00:15.649 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS auto
test successful 1Base Dot11Radio interface Ethernet MAC address: 7 c: AD:74:93:36:
BA* 00:00:56.377 Mar 1: % LINK-3-UPDOWN: Interface GigabitEthernet0, changed state
up to
up to
ernet0, changed state down
* 00:11:00.003 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio1, changed state of a
dministratively down
* 00:11:00.003 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed state of a
dministratively down
* 00:11:00.003 Mar 1: % CDP_PD-4-POWER_OK: full power - AC_ADAPTOR inline power s
ource
* 00:11:00.012 Mar 1: % SYS-5-RESTART: System restarted.
Software Cisco IOS, C1260 Software (AP3G1-K9W7-M), Version 12.4 (25 d) JA1, COMMUNICATED
SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Updated Friday, August 11, 11 02:07 by prod_rel_team
* 00:11:00.012 Mar 1: % SNMP-5-start COLD: SNMP agent on host ap undergoes a c
old beginning
* 00:11:00.994 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
State of GED until
* 00:11:01.003 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
1, changed down state
* 00:11:01.003 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed down state
* 00:11:11.956 Mar 1: % LINK-3-UPDOWN: Interface BVI1, changed State to down
* 00:11:12.957 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
State of GOL downstairsWhat are your settings of the nec console?
You must be 9600, none, 8, 1 and flow controll set off to be able to interact with the CLI
HTH,
Steve------------------------------------------------------------------------------------------------
Please don't forget to rate helpful messages and mark the questions answers -
Hello
I'm putting it on oracle 11.2.0.1 to 11.2.0.3 DB level but during DBUA, I got error
"ORA-00205: error in the identification of control files, check the log of alerts for more information.
I have check the alerts log in E:\app\kmahalingam\diag\rdbms\orcl\orcl\trace\alert_orcl.txt
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SNA system picked latch-free 3
With the help of LOG_ARCHIVE_DEST_1 parameter value by default as USE_DB_RECOVERY_FILE_DEST
Autotune undo retention is enabled.
IMODE = BR
ILAT = 51
LICENSE_MAX_USERS = 0
SYS audit is disabled
Commissioning:
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
With the options of partitioning, OLAP, Data Mining and Real Application Testing.
Windows NT Version V6.1 Service Pack 1
UC: 8 - type 8664, 8 physical cores
Process affinity: 0 x 0 x 0000000000000000
Memory (success/Total): Ph: 3241 M / 16383 M, Ph + FCP: 16565 M / 32765 M
Using parameters in spfile E:\APP\KMAHALINGAM\PRODUCT\11.2.0\DBHOME_2\DATABASE\SPFILEORCL server-side. ORA
Parameters of the system with default values:
process = 300
sessions = 472
memory_target = 3280M
control_files = 'E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL.
control_files = 'E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL.
DB_BLOCK_SIZE = 8192
compatible = "11.2.0.0.0."
db_recovery_file_dest = 'E:\app\kmahalingam\flash_recovery_area. '
db_recovery_file_dest_size = 3912M
undo_tablespace = 'UNDOTBS1.
Remote_login_passwordfile = "EXCLUSIVE."
db_domain = "cpg.com."
dispatchers = "(PROTOCOL=TCP) (SERVICE = orclXDB)" "
audit_file_dest = "E:\APP\KMAHALINGAM\ADMIN\ORCL\ADUMP".
AUDIT_TRAIL = 'NONE '.
db_name = "orcl".
open_cursors = 300
star_transformation_enabled = 'TRUE '.
diagnostic_dest = "E:\APP\KMAHALINGAM".
Fri Mar 07 00:33:15 2014
PMON started with pid = 2, OS id = 25072
Fri Mar 07 00:33:15 2014
PSP0 started with pid = 3, OS id = 25688
Fri Mar 07 00:33:16 2014
VKTM started with pid = 4, OS id = 27608 high priority
VKTM clocked at (10) precision of milliseconds with DBRM quantum (100) ms
Fri Mar 07 00:33:16 2014
GEN0 started with pid = 5, OS id = 11484
Fri Mar 07 00:33:16 2014
DIAG started with pid = 6, OS id = 16980
Fri Mar 07 00:33:16 2014
DBRM started with pid = 7, OS id = 2200
Fri Mar 07 00:33:16 2014
DIA0 started with pid = 8, OS id = 8024
Fri Mar 07 00:33:16 2014
MA started with pid = 9, OS id = 15688
Fri Mar 07 00:33:16 2014
DBW0 started with pid = 10, OS id = 19908
Fri Mar 07 00:33:16 2014
LGWR started with pid = 11, OS id = 22616
Fri Mar 07 00:33:16 2014
CKPT started with pid = 12, OS id = 12828
Fri Mar 07 00:33:16 2014
SMON started with pid = 13, OS id = 10184
Fri Mar 07 00:33:16 2014
RECCE has started with pid = 14, OS id = 28984
Fri Mar 07 00:33:16 2014
MMON started with pid = 15, OS id = 22288
Fri Mar 07 00:33:16 2014
MMNL started with pid = 16, OS id = 12072
commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...
commissioning or shared server 1...
Environment ORACLE_BASE = E:\app\kmahalingam
Fri Mar 07 00:33:16 2014
ALTER DATABASE MOUNT
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 marked during: ALTER DATABASE MOUNT...
Fri Mar 07 00:34:46 2014
ALTER DATABASE MOUNT
Fri Mar 07 00:34:46 2014
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 marked during: ALTER DATABASE MOUNT...
Fri Mar 07 00:45:51 2014
change the database editing
Fri Mar 07 00:45:51 2014
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 scored at the course: change the editing of the database...
Fri Mar 07 00:48:13 2014
change the database editing
Fri Mar 07 00:48:13 2014
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 scored at the course: change the editing of the database...
Fri Mar 07 00:52:34 2014
Derives from detected time. Check the file path VKTM for more details.
Fri Mar 07 00:53:46 2014
Closure of proceedings (immediate)
Closure of proceedings: in addition to logons disabled
Stop background MMNL process
MMON background process stop
The high waters = 1 license
All dispatchers/dispatchers and shared servers stop
ALTER DATABASE CLOSE NORMAL
ORA-1507 marked during: ALTER DATABASE CLOSE NORMAL...
ARCH: Disabled archives due to the stop: 1089
Stop process to archive
Archiving is disabled
ARCH: Disabled archives due to the stop: 1089
Stop process to archive
Archiving is disabled
Fri Mar 07 00:53:49 2014
Stop background VKTM process
Fri Mar 07 00:53:51 2014
Instance shutdown complete
Fri Mar 07 00:54:01, 2014
Setting the default value of the parameter parallel_max_servers
320 to 285 because of the value of the process parameters (300)
Help, please
Thank you
According to spfile.
control_files = 'E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL.
control_files = 'E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL.
You mentioned
Davinapochon wrote:
E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL02. CTL file is there but there is no CONTROL01. CTL file.
So little confused here.
E:\APP\KMAHALINGAM\ORADATA\ORCL\--> must contain CONTROL01. CTL
E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\--> must contain CONTROL02. CTL
What is it now?
Anand
Maybe you are looking for
-
I have an iPhone5s for about 3 years now. My phone has been in place for some time now. My phone just hangs and I have to reset ("home" button and lock button) and when I unlock it after ALL my messages have disappeared or erasing their own messages
-
The download window opens, but it is empty.
When I download a file, the download window opens, but no details of file appear. It remains empty. To access the downloaded file, I have from My Documents downloads file. This oddity showed out of the blue one day, I have no idea why. Otherwise, thi
-
EPrint &; LaserJet Pro 276nw
I installed the printer on my wireless network. The activation process of web Service directly into the printer don't DO NOT WORK. But, I installed the software in my notebook from ASUS EEE, with usb connection to confirm the parameters of the printe
-
How to open a file__ ofx
Should what files or drivers I download in order to open an ofx file
-
Another type of MTP issue I read here
need information: Sansa Fuze 4 GB version 02.03.31A using the MTP, info PC mode: build self system, XP home SP3, WMP 11. CPU AMD FX 60 2.6 Ghz, 3 GB, ATI gfx card ram Problem: The mode MTP and WMP 11 worked fine several weeks ago. As sync playlists,