Erratic Yoga 11 automatic rotation after updating Windows 10

Similar Questions

• Yet WT8-A-102 screen auto rotation after update not

  Yet WT8-A-102 screen auto rotation after update not
  I have re installed the drivers

  Now the Tablet does not start-> error - system thread unhandled exception

  The system Thread Exception BSOD error unhandled in Windows 8 arises especially due to incompatible or old graphics card drivers.

  I assume that you have installed drivers that were not compatible
  To solve this problem I recommend you choose the Windows repair procedure

  You should start the tablet in the menu boot device
  Press on and hold the flight button + and hold also the power button until the device turns on and the boot device selection menu appears.

  Now you should be able to choose the option of HARD drive recovery.
  Then choose troubleshooting and got advanced options
  Here, you should be able to repair the system automatically.

  Useful info:
  http://APS2.toshiba-tro.de/KB0/HTD4103K90000R01.htm

• By using the system restore before computer restart after updating Windows 10...

  I chose to try the upgrade of Windows 10 on my laptop primary.  Because of the long installation times, I started late in the evening then followed finishing (or almost) the update the next morning.  Until I sat down to 'start' I spoke with a friend who had just completed an installation of two heavy day of problems.    Although I am good enough to solve computer OS and software installation problems, I was very reluctant to go forward.   After serious soul searching I elected continue to use Windows 7, I don't really like.

  That's why I chose to use the system restore before restarting my computer needed complete Windows Update 10.  I chose the previous restore point before the update of windows 10 and ran through the entire procedure and then restarted the computer after the restore point.

  Everything worked fine and I was able to do the foregoing... Except that I can't do updates of security that have been uninstalled.   The Windows Update screen repeat "you must restart your computer...". "with the reboot by holding the active button.

  This window doesn't go away even after reboot, and I can not "check for Updates".

  Does anyone have any suggestions on how to reset this program if I can do all the updates except Windows 10 security.

  Thank you for any assistance.

  By using the system restore before computer restart after updating Windows 10...

  Sorry, System Restore does not cancel the major updates, that's why a lot of automatic updates delete all system restore points. The tool that is appropriate in this case would be a restore Image. If you have not created an image before the upgrade, then you are out of luck.

• MY ipad has not automatically closing after update to ios 10

  MY ipad has not automatically closing after update to ios 10

  Take a look at suggestions from this thread. iOS 10 Auto-Lock does not.

• After updating windows 7 Edition family premium my phone regularly crashes when you try to access the folder

  After updating windows 7 Edition family premium my phone breaks down regularly when you try to access the folder - I installed several updates, correct its and also removed countless system software - can someone help please!  It normally occurs when you access my folder music or documents, even if they are empty! I'm using an asus laptop

  There is no free or paid for the software will fix PC problems

  'used cmd & scan' could mean allmost anything.

  Apparently, you have a portable computer, you do not have scource drivers for a laptop computer via windows update (unless this portable machine said) but this laptop manufacturers support site, then visit this site of support of decision makers and reinstall all the drivers available.

• After updating Windows 10, the CPU cannot push frequency.

  After updating Windows 10, the CPU cannot push frequency. The setting of the battery's performance. Alienware 15. Really need help

  You will probably get a better response if you re - post it in the forum of the Club of Alienware

• After updating Windows 10 on my PC, when I try to update Adobe Muse, I get an error DF024. Help, please!

  After updating Windows 10 on my PC, when I try to update Adobe Muse, I get an error DF024. Help, please!

  Hello

  Please see the help document for troubleshooting with the installation logs: https://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

  Let us know if this helps!

• HP Envy 13-j001ng 2 X: no rotation of the screen after updating Windows 10

  Hello

  After the Windows 10 update, the screen will not rotate automatically. Sensor apps tests show that they are working correctly. I have the rotation toggle lock in the notification Panel (I read that some people affected by similar problems don't have it). Any solution for now or should I just wait for updates?

  To solve the problem, I had to replace the pilot ODS sensor V2 with the Simple device orientation sensor driver. Now rotation works.

• After updating Windows, causing KB981957 XP BSOD, C000021a Service Control Manager error at startup in safe and normal mode.

  After you apply this update, the system starts more (secure or normal) and gives the BSOD error above.  Manual removal of the patch Recovery Console fix the BSOD using batch spuninst.txt in the patch folder.  The affected system is an AMD Athlon 2400 + with 2 GB of RAM and XP SP3.  All other updates installs successfully.  I scanned viruses with Avast, Dr Web CureIt, ComboFix, Malwarebytes and TDSSKiller.  The system seems to work fine without the update.

  It seems to be a problem with the Win32k.sys file in the patch, but I ran out of utilities to solve this problem.

  Hello

  The solution is to report the problem, so the update can be set to not to do so. Microsoft
  may already be a fix, or work on it, or it could be a new problem. He
  There's even a phone number to make it easier.

  Certainly keep good backups that there could be an underlying hard disk or hardware
  issue.

  ========================================================

  Here is the solution for the coooo21A except use it when you can just get the fixed update
  is not the method I want to use.

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the WindowsAdvanced Options menu that results, select thelast known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not try to repair it, you can borrow a friends because they are not protected against copying. You can also buy the physical disks
  good system machine cheap that you already own Windows (you have to reinstall them if)
  required). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I get 80244o1c error after updated windows update

  I recently used the reformat windows 8 setting, "all remove and reinstall windows.

  I have had no problems or issues with the process until I've decided to use windows update to install the necessary updates.

  Update Windows prompted me to upgrade to the latest version. I then downloaded and installed the update and it told me that windows update will automatically close and open again. After the update I went and go to check updates. I filled the boxes updates, I want to install the first. I have install updated partially because I don't have the best internet speed to download all updates at once. But after installing the updates I get only error 8024401c. I tried to use the Troubleshoot utility and restart the computer when you are finished, but I still get the error. I tried all of the solutions in this link http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_update/windows-update-error-code-8024401c/f8b9dc5f-a512-4e74-b41c-d357ca40f9f7. But still nothing.

  Help, please.

  P.S

  I also tried to reset (delete everything and reinstall windows) several times and the recovery of a option restore point until I started the update from windows update. But still no luck.

  Hi Justin,

  Thanks for posting your query on the Microsoft Community.

  I appreciate your troubleshooting steps.

  As you said you get a 8024401C error after installing Windows updates.

  I need some information.

  1. What is the brand and model of your computer?
  2. Do you remember the numbers KB installed updates?
  3. What happened when you performed the reset and restore? Do you have an error code or message?

  I suggest you to please provide us with the number of the last update that you have installed on your computer.

  See the link given below to find the number of the update through view update history. Please refer to the appropriate section (how can I find out what updates have been installed).

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  Try the methods.

  Method 1:

  As you have already tried to reinstall your Windows, I still once suggest to run the system update tool as system update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008.

  See the link below for the procedure:
  http://support.Microsoft.com/kb/947821

  Method 2:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tells you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  I hope this helps. Please let us know the results. We will be happy to help you further.

• Firefox runs very slowly after updating Windows 10

  Saturday, December 12, 10 Windows spent an age of update itself, with several reboots. Since then, the navigation is horribly slow with Firefox, although my internet connection is always very well (fast my Smartphone using Microsoft Edge). I have two PCs, and both seem to have been affected in the same way. Using the Task Manager, I see that Firefox uses a lot of CPU most of the time - often more than 50%. Even typing and scrolling are very slow, not just downloading.
  I disabled all my add-ins and plug-ins, run in safe mode, rebooted and reinstalled Firefox without result. So far, I'd say that Firefox is the fastest browser. I think that Firefox updated itself 42.0 version a few days, so I have a suspect that this slowdown has occurred just after a Windows Update.

  Update: Windows update itself again today and, like magic, Firefox is again well. So problem solved.

• HP ENVY Notebook PC m6: after updating windows 10 touchpad freeze shortly after using the keyboard

  Hello

  I've updated my laptop it has windows 8.1 to 10 and for a few days then my touchpad/pointer has been gel 4-5 seconds after I touch any key on the keyboard. for example. If I hit enter then I can't move the pointer for a few seconds... I can always use the left and right click while the pointer does not move.

  Everything worked perfectly until I upgraded to windows 10 and everything else outside the mouse freezing seems to work properly after the upgrade.

  Any help fixing this issue would be greatly appreciated, thanks!

  Hello @juibre,

  Welcome to the Forums of HP Support!

  I understand that you are having a problem with your TouchPad and wanted to help you!

  For starters, can you provide me with the product number of the laptop?  Here is a link, you can use that will help you find your model and product number: How can I find my model number or product number?

  In the meantime, please see the post by Member of the DanG82community.  In this post, you will find details of disputes with keys touch after installing Windows 10: Re: How do I solve the Post-Windows 10 questions about HP laptops Upgrade

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Welitebook HP 8540p: Wireless disconnects frequently after updating windows 10 Hp Notebook welitebook 8540p

  I'm updating to win10 about a month ago. Since 3 days wifi disconnect every minute...

  is it because of a windows update?

  concerning

  linustocn

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on WiFi often disconnect and wanted to help.
  
  Whenever someone comes here running Win10 and complains about something just suddenly does not work, I immediately suspect driver updates Windows.
  
  Unfortunately, Win10 forces automatically updates driver on each of us, without our knowledge and without our permission - and in this case, a work PC is suddenly 'broken '.  This could happen to you.
  
  You must go to settings, update & security--> Windows Update.
  
  Then choose Advanced Options--> history to see when the updates have been applied last.  If you see one that include device drivers, who might be the problem. So, if you can, you should see if you can restore the drivers that are causing the problem.  Do so you by going into Device Manager, see if the device is still listed and so, trying to restore the last driver update.
  
  And if this resolves the problem, then disable future driver updates by using the information in the link: http://www.tenforums.com/tutorials/48277-driver-updates-windows-update-enable-disable-windows-10-a.html

  If you don't see the driver updates recently, then try the steps in this thread: HP PC - wireless network and Internet troubleshooting
  
  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Officejet OfficeJet Pro 8600 Plus: Pro 8600 more will not scan from touchpad after updating Windows 10

  After a Windows 10 update, my printer will not touchpad analyze. It will scan the troubleshooting utility. I unplugged and reset without success. I have updated to the latest version of the HP software for the printer. What else can I try?

  Hello

  You can try to install from the link here:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8600-plus-e-all-in-one-printer-series-N911/4322915/model/4323647

  Before installing the HP software above, please uninstall your previous version first.

  During installation, select the type of standard or recommended installation when you are prompted by the installation software. If you choose a minimum installation, read the description of each component software with caution to avoid the unintentional loss of functionality of the printer.

  You can check via "Control Panel" > "Hardware and sound"-> "Devices and printers"-> under "printers and faxes". There will be a green check mark is marked to your printer if it connected successfully.

  Hope this helps you.

• No sound from speakers after update (Windows/BIOS)? What can I do to fix this?

  If you do not have from speakers after an update (Windows or Bios), please try a Hard reset first. Also, keep reset material mind does the same thing with each cell.

   

  Now, if the hard reset does not work, you will need to update the Audio drivers (Realtek High definition (HD) Audio Driver) on the HP site.

  Once you arrive at this page of your product type # in (if you don't know what your product is # or when it is on the laptop, here is a video that will show you exactly where to find ) > search click > select the option 'Software & Driver Downloads' > choose your operating system (not sure what operating system you have or where?) ( This should help out you) > then click after selecting operating system > scroll down and click on the + (plus) next to "Audio driver" > and then select the most recent version by checking the date on each download > then run.  Now test the sound after installation.

  Also, please try to use Recovery Manager to reinstall the IDT HD Audio Driver If the steps above do not work. How to use the Recovery Manager to reinstall the drivers and software is detailed in the document below.

  http://support.HP.com/us-en/document/c01868333

  The last step to do if you get always no sound at all is a system restore to when you know the sound worked and do not download the last updated after that.

  Here is the document to show you how to proceed. Select the option at the top that says "restore windows to an earlier point.

  Just make sure and save the files and upload, you have recently installed or saved on your laptop.

  THX

  Hope this information is helpful to you.

  THX guys