erroe code 646 for windows updates
I am trying to install microsoft updates and the software and I get an erroe 646 code
http://www.Microsoft.com/downloads/en/default.aspx
Try a direct download.
Put each Kbnumero in the search engine at the link above.
If this does not work:
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
error code 80070673 for windows update for vista
error code 80070673 for windows update for vista
Hello Jwisetoyo,
Thank you for your message. Please click HERE for a possible solution to your problem.
See you soon
Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Error Code C800044E for Windows updates.
I get this error code c800044e for Windows updates. I tried the support center to the bottom of the load and fix, but it does not resolve this error. Help, please.
Hello
1. all the troubleshooting steps have followed so far?
2. the updates could not be installed?
3. what fixit did you run?
4 have have there been recent changes made on the computer before the show?
I suggest you to follow the steps mentioned below and check if it helps.
Method 1: Put the computer in a clean boot state and try to install the updates.
http://support.Microsoft.com/kb/929135
Note: After installing the updates, follow step 7 in the link provided to return the computer to a Normal startupmode.
Try to download the update and install.
Download Center.
http://www.Microsoft.com/download/en/default.aspx
Method 2: If the problem persists with Windows updates, the problems with the installation of the updates.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Method 3: How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Then try to reinstall updates.
I hope the information is useful!
-
Error code 646 for Windows Microsoft Office Update.
I have Microsoft Office 2007, and for weeks now Windows Update is not able to update the necessary updates. Error code 646 appears after updates fail, but all of the other Windows updates work very well but these Microsoft Office simply don't work and it happened for weeks. I searched for answers, but all lead to dead ends. Help!
BROWNEY,
Gives it a try and see if it solves the problem....
http://support.Microsoft.com/kb/2258121>
Let us know if this helped
-
Windows Vista Home Premium update says that Office 2003 requires updates below. Windows Update is running, but is unable to install the updates, returning to the place this error message "Code 646 Windows Update encountered an unknown error." How can it be solved for Windows update functions correctly?
1. this box a Norton 360 installed, but turn off the Norton firewall or AV does not solve the problem.
2. a register.bat file has been created and executed without success (http://social.answers.microsoft.com/Forums/en-US/vistainstall/thread/ea11e1cf-150a-4d44-99a8-de00a1532f44/)
Here are the updates that Windows says it needs:Update of security for Microsoft Office 2003 (KB972580)
Download size: 1.2 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
A vulnerability of security in Microsoft Office 2003 that could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves the vulnerability so that Microsoft Office 2003 documents are handled appropriately.
More information:
http://support.Microsoft.com/kb/972580Help and Support:
http://support.Microsoft.com/?ln=en-usUpdate of security for Microsoft Office 2003 (KB974554)
Download size: 829 KB
You may have to restart your computer for this update is taken into account.
Update type: Important
This update resolves a problem that can cause programs that use Outlook view with Forms 2.0 control, such as Microsoft Office Outlook with Business Contact Manager, stop functioning as expected after installation of update of security for Microsoft Office Outlook 2003 (KB973705).
More information:
http://support.Microsoft.com/kb/974554Help and Support:
http://support.Microsoft.com/?ln=en-usUpdate of security for Microsoft Office Excel 2003 (KB973475)
Download size: 4.9 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
A vulnerability of security in Microsoft Office Excel 2003 that could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves this vulnerability.
More information:
http://support.Microsoft.com/kb/973475Help and Support:
http://support.Microsoft.com/?ln=en-usUpdate of security for Microsoft Office Outlook 2003 (KB973705)
Download size: 4.8 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
A vulnerability of security in Microsoft Office Outlook 2003 that could allow arbitrary code to run when a malicious web page that is updated it is open. This update resolves this vulnerability.
More information:
http://support.Microsoft.com/kb/973705Help and Support:
http://support.Microsoft.com/?ln=en-usUpdate of security for Microsoft Office Word 2003 (KB973443)
Download size: 5.6 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
This update resolves a vulnerability that exists in Microsoft Office 2003 that could allow arbitrary code to run when opening a file modified for malicious purposes.
More information:
http://support.Microsoft.com/kb/973443Help and Support:
http://support.Microsoft.com/?ln=en-usUpdate for the junk e-mail in Outlook 2003 (KB975958) filter
Download size: 3.4 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
This update provides the filter of junk e-mail in Microsoft Office Outlook 2003 a more current definition of which e-mail messages should be considered junk e-mail.
More information:
http://support.Microsoft.com/kb/975958Help and Support:
http://support.Microsoft.com/?ln=en-usMicrosoft, I solved this problem on my own. I wish you all that you experience the same problems that make your users, again and again, until your souls bankrupts bleed into oblivion.
-
error code 646 for the updates of Microsoft office
error code 646 for Microsoft office updates KB949710, KB951550, KB973593, KB950130, KB951944, KB973704, KB974561. Help, please
Try this for your error Code 646 and read ALL the messages/solutions to your problem on the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f3390e74-9961-4AAE-8a05-554c1a9cf1a2
Read the info on the above link to error Code 646.
With the compliments of: David_O - Support Engineer
This problem occurs when the agent Windows Update Wups2.dll file is incorrectly registered in the registry. Because registry files that correspond to the Wups2.dll file are missing, update facilities have failed. There are two methods to resolve this issue, use method 1 first, and if it did not resolve your issue, go to method 2
Method 1: Save the Windows Update files
1. click Start and type notepad in the box start the search .
2. click on Notepad in the programs list.
3. copy the following commands, and then paste them into the opened Notepad window:
REGSVR32 WUPS2. DLL/S
REGSVR32 STINKS. DLL/S
REGSVR32 WUAUENG. DLL/S
REGSVR32 WUAPI. DLL/S
REGSVR32 WUCLTUX. DLL/S
REGSVR32 WUWEBV. DLL/S
REGSVR32 JSCRIPT. DLL/S
REGSVR32 MSXML3. DLL/S1. in Notepad, on the file menu, click on record under.
2. in the list record under , click all files.
3. in the file name box, type register.bat.
4. save the Register.bat file to your desktop.
5 right-click the Register.bat file, and then click run as administrator. Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password or click continue.
6. try to install the updates again.
Method 2: Download and install Windows Update agent
For more information about how to download and install the latest Windows Update agent, click on the number below to view the article in the Microsoft Knowledge Base:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the above does not help:
You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include this error Code, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon
Mick Murphy - Microsoft partner
-
Lack of this continuous update and when I tried to download it from Windows Center it says error opening installation log file. Verify that the specified log file location exists and is writable. Grateful for any advice, because this is my oldest update and seems to be the origin of the later updates to fail
http://support.Microsoft.com/kb/2258121/en-AU
You receive the error code 0 x 80070646 or 646 error code when you try to install Microsoft Office updates
http://www.Microsoft.com/downloads/en/default.aspx
Also, try to put the KB numbers in the search at the above link > then download them manually.
If the above does not solve it:
Windows Update Forum:
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon
Mick Murphy - Microsoft partner
-
Install error code 646 for security update has failed. I run Windows Vista
I tried to install six important updates. One is an update of security for Microsoft Works 8.
Then I updates security for Microsoft Office Outlook 2007, Microsoft Office Visio Viewer 2007. I have two updates of security for Microsoft Office System 2007. I have an update for Microsoft Outlook 2007 Junk e-mail filter. I get an error code. The code is 646.I error code tried to install these updates since 10/16/09.Whenever I try to install these updates, I get the same error code 646. I tried since 16/10/09. When I stopped my laptop updates try to install and they fail. When I go to help and support he told me to accept the terms, but the screen is never the same. I'm at my wits end. How can I fix the problem. It is the first time that this has happened.
Hello
Try this 1st to see if it helps: (it usually does)
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary:
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the preparation tool update for Windows Vista for Windows Server 2008 and Windows 7 system
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the groups of the Agency who could
have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Erroe code: 0x8007F007 for Windows XP (KB941569) security update.
Original title:
install failure: windows media runtime 9.5 & 11 windows xp security undate
install failure: format KB941569 windows media runtime 9.5 & 11 windows xp security update.
the bad code # is: 0x8007F007
system: windows xp / x 86, 2002 professional, service pack 3
PC: processor intel pentium 1.5 GHz, 598 MHz, 504 MB of RAM
HelloThanks for posting in Microsoft Community!
I understand that you are facing problems with Windows updates.Let's see the following steps in the article and sugg_r_es and check:You cannot install some programs or updatesNote:Ignore "method 7: upgrade on site" link above.Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:How to back up and restore the registry in Windows XPImportant note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Thanks for posting the result and let us know if you need assistance on Windows. -
Error code 646 for Windows Vista
When I try to install these updates, I get an error code 646. I have a laptop Dell Inspiron 1501 with Windows Vista.
Update of security for the viewer Microsoft Office Visio 2007 (KB973709)
Download size: 2.5 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
A vulnerability of security in Microsoft Office Visio Viewer 2007 could allow arbitrary code to run when a malicious web page that is updated it is open. This update resolves this vulnerability.
More information:
http://support.Microsoft.com/kb/973709Help and Support:
http://support.Microsoft.com/?ln=en-usUpdate of security for Microsoft Office System 2007 (KB972581)
Download size: 1.0 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
A 2007 Microsoft Office System security vulnerability could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves the vulnerability so that the 2007 Microsoft Office System documents are managed appropriately.
More information:
http://support.Microsoft.com/kb/972581Help and Support:
http://support.Microsoft.com/?ln=en-usUpdate of security for Microsoft Office System 2007 (KB974234)
Download size: 525 KB
You may have to restart your computer for this update is taken into account.
Update type: Important
This update resolves a problem that can cause programs that use Outlook view with Forms 2.0 control, such as Microsoft Office Outlook with Business Contact Manager, stop functioning as expected after installation of update of security for Microsoft Office Outlook 2007 (KB972363).
More information:
http://support.Microsoft.com/kb/974234Help and Support:
http://support.Microsoft.com/?ln=en-usOK... I had the same problem with the download of the 2007 Microsoft security updates. When I tried to install updates, I receive error 646. I finally solved my problem by going to the Download Center on Microsoft and I install manually.
Here are the steps that I took... which I think should work:
(1) go to the Microsoft Download Center: http://www.microsoft.com/downloads/en/default.aspx
(2) look for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB974234)
3) click on the link for the download and then click on download and run. I think you have to accept an agreement, then click on continue or OK
4) repeat for all downloads that you can not install
(5) run Microsoft Update new and click search the updates and if updates have been installed successfully, they should no longer appear in the updates that must be installed.I don't know if it is not relevant or if it helped me succeed to install updates manually, but before I manually installed my updates I followed the instructions David_O posted here http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f3390e74-9961-4aae-8a05-554c1a9cf1a2 . I suggest that first of all try to download manually by following my directions. If it does not, then it's a possibility instructions of David resolved an issue that allowed me to download them manually disable Microsoft downloads site.
I can't believe all the research and the suggestions of the technicians did not work... sometimes your own research is the best!
I hope this helps! Good luck!
-
Original title: 646, windows update error code has encountered an unknown error.
I tried several times to allow the updates to install on my computer but I keep getting the above error message. Here are the following updates are not transferred to the system
Security for Microsoft Office 2007 Suite KB2596785 update,
Update for Microsoft Office system 2007 KB2553089 security,
Update of security for Microsoft Office 2007 System KB2553090,
Update of security for Microsoft Office 2007 System KB2584063,
Update for Microsoft Office Excel 2007 KB2553073 security,
Update for Microsoft Office Powerpoint 2007 KB2596764 security,
Update for Microsoft Office Powerpoint 2007 KB2596912 security,
Update for the 2007 Microsoft Office System KB2553074 security
Update for Microsoft Office 2007 suite KB2596651
Update for Microsoft Office 2007 suite KB2596789
Update for Microsoft Office Excel 2007 KB2596596
I installed the update of Windows SP2 and ran the 'Fix It' program, but updates above will be not installed this over the last 2 weeks.
PLEASE HELP ME! Not an expert computer operator, but I can follow the clear and direct instructions on how to solve the problem.
Hi Monicas,
What Fixit did you run?
You can read the following article and try the steps.
http://support.Microsoft.com/kb/2258121?WA=wsignin1.0
Note: If running the Fixit to resolve your problem, then you must try the steps for Windows Vista users solve the problem.
Important: The above article contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information about how to back up and restore the registry, follow the steps from the link below:
-
Error code 646 for KB982331 update
Had evil on 6 updates on 10JN2010. Downloaded directly from the MS. Download Center Everything worked but KB982331 who does not and keeps rebooting and fail more than 6 times. What is the first cause and what is the solution?
http://www.vista4beginners.com/how-to-disable-UAC
You can try the above to install it.
http://www.Microsoft.com/downloads/en/default.aspx
Put the KB numbers in the search at the above link > download them manually.
If this does not solve it:
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon
Mick Murphy - Microsoft partner
-
When I shut down my pc overnight. Windows updates try to install, but they fail every time. This happened for bout 4 weeks now. There are 3 updates failed. they are; Microsoft office onenote 2007 update KB980729, the 2007 microsoft office system KB981715 and update of security for Microsoft office system 2007 KB976321. I don't know what to do these updates can install correctly. I have windows 7. I use to have security of norton, but I know I have mcafee. and I've changed programs of security around the same time, I started getting these error codes.
Thank you
Lwwhite
Sorry, you have problems getting your patches installed. I have a number of things for you to look at. First of all, your Background Intelligent Transfer Services set to Automaticand started and Windows Update ? You can check these settings by typing services.msc in the search box of the start menu.
Since they are all Office updates, you can do a repair for office function. To do this, click the Start button, type programs and features and click the enter key. Right click on Microsoft Office 2007 and choose change. Choose fix and continue. Microsoft Office will attempt to fix any problems there (this will) take a few minutes to run.
Sometimes in order to get patches to install correctly, you must perform these tasks manually. Download and run each patch:
One last thing, you mention that you removed Norton. Did you use just add/remove programs? If so, you must run the Norton Romoval Tool (from Norton). Add/Remove Programs does not receive everything uninstalled. Here is the link: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
Hope this helps to get your installed patches.
Barbara
-
Error code 646 on windows update.
Im trying to install the important updates 9 to my computer, but repeat me error code 646. I also have the internet connection but internet Explorer itself does not work. I can't get onilne with her to get help and to manually download the updates. What should I do?
Santeria126,
Please post with the information requested here: what to post in the Windows Update forum
Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.Clean boot your PC, and then run Windows Update.
Reset the Windows Update components
Perform operations of KB883825
You can look at this thread as well, it covers the error you see: Error Code 646 Thread
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
When using automatic update I have error Code 646 for all update 2007 office
Whenever I'm going to update office 2007 using updat auto I get the error code 646. I have to have to review the updates and goto discovers each separately to update and install them one at a time. How to return to the installation of automatic update, so I did not install them one at a time?
1. maybe repair or reinstall Office 2007. You will need your product key and the original installation media.
2. try to install the updates with the media in the drive of original installation.
I think it's because of a registry problem that keeps this error for specific products that is why I proposed the repair/reinstallation of office.
TaurArian [MVP] 2005-2010 - Update Services
Maybe you are looking for
-
I get the message below everytime I use Firefox. None of the recommended fixes have worked. I tried to reinstall Firefox but the problem reoccurs. Help! This is the message I get: This connection is Untrusted You asked Firefox to connect safely to ww
-
worksheet do not add line break
Why only give me a line rather than 5?
-
Router is not connecting to the new cable modem
Time Warner has replaced my cable modem with a Motorola SBV1521 and my Linksys BEFSR81 router cannot connect to it. No lights for the WAN port when the modem is connected. I have tried everything what Linksys said in their "set up a Linksys router w
-
How many times windows empty cache on disk
I have an SSD, with write cache enable and using write cache flushing flushing buffer (i.e., uchecked, not turned off). I read that this means that windows periodically empty the contents. My question is: how many times windows empty the cache (if yo
-
could not clean the file history data element not found in windows 8
My drive hard ext fills, and when I try to clean the first versions or any version I get the same message "could not clean the file history data element not found in windows 8" I don't know if there is a corrupted file. The only thing I have not don