error 03-EEEE-0000

Similar Questions

• Satellite A215-7422 - restore DVD gives the error "03-EEEE-0000" 'press 'OK' to restart.

  Hi all!

  I'm trying to restore my Toshiba A215 in the way that it comes from the factory, because I messed with it so that it is not worth of clean install myself if I want to do a clean install of Vista original.

  But for some reason when I booted from the DVD and then chose the "Restore Wizard" or what ever and then it gives me error and makes me reboot. The only things I changed from the factory are a stick 2 gig of ram, latest version of bios and updated firmware for the DVD drive.

  I'm starting to think that the firmware of the DVD drive can affect the DVD because it is not a material commonly updated. I guess right here, but that might be the problem.

  Any thoughts?

  -A_DoNuT

  Hmm... Do you have you have downloaded and used the firmware and the BIOS from the Toshiba page we?
  Satellite A215-7422 belongs to the American TV series and therefore you must use the drivers from the Toshiba driver page we.

  Have you tried to install the OS by using the original CD of Microsoft Windows?

  This allows to know if this problem could be linked to the issue of CD/DVD drive (firmware) or corrupted RAM modules.

  According to your post above, the new RAM 2 GB module has been inserted.
  Perhaps you should withdraw and should try to install the operating system using the original modules were installed in the laptop from the beginning.

  Check it out

• Failed to retrieve ERROR: 06-0204-0000 on Satellite M300

  Hey guys,.

  I tried to run the Toshiba Recovery on my M300 laptop and its come with a message saying ERROR: 06-0204-0000
  An error has occurred
  Please close [OK] to turn off the computer

  What kind of error is it?
  Anyway, any help would be much appreciated

  Hello

  Just a question;
  Have you tried to recover the device, or you tried to create a recovery disk?

  To be honest I'm not quite sure this error but if it occurred during the system restore, then you must repeat this procedure to new m.

  I think that's only a temporal error message

  Try to boot from the recovery again disk and check how it will work.

  Good luck

• Get an error asus eee pc acpi service has encountered a problem and needs to close

  I get an error on startup: get an error asus eee pc acpi service has encountered a problem and needs to close

  What can I do to fix this?
  GR Erik Frederiks
  (Asus EEE PC 1005HA)

  Hello

  Did you change on your computer before the show?

  Follow the steps mentioned below:

  Method 1:

  Step 1: Start the computer in safe mode with network and check the issue

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  If the problem does not occur in safe mode with network, follow the next step to isolate the problem.

  Step 2:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2: Reinstall ACPI drivers from the site of the factory

  Click on the link http://www.asus.com/Eee/Eee_PC/Eee_PC_1005HA_Seashell/#download and try to reinstall the drivers.

  It could be useful!

• Restore my toshiba satellite error 03-FFFF-0000

  I want to restore my toshiba so I run the Pentecost the drive of toshiba Recovery Wizard, but it came: error 03-FFFF-0000... What can I do?

  Thank you!

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• 03-EEEE-0000 Recovery Disc Error

  Bad recovery disk. I installed an OEM version and everything worked fine.

  Hello

  It may be more useful to provide more details on your problem.
  What cell phone do you have?
  When have you seen this error? He appears during the creation of the recovery disc or during execution of a process of recovery?

• Get an error asus eee pc acpi service has encountered a problem and needs to close "and widows crashes"

  OP: AppName: asacpisvr.exe_ AppVer: 6.1.1.36_ ModName: unknown__ModVer: 0.0.0.0_ Offset: 1000b63e

  tried to clarify some of my options in "run" and I have not typed msconfig startup required and I made a few small changes and now an error message is popping up saying "asus eee pc acpi service has encountered a problem and needs to close" and it keeps popping up. So I went back after it rebooted and has defeated the changes and restarted again and it the error message keeps coming back!

  Hello, Gina Cecchetelli,.

  The error message and the event log indicates that the problem is related to the ACPI driver. I suggest you reinstall the ACPI driver and check if you have the same problem. Here is a link I found on the Asus website support to download the ACPI driver:

  http://support.ASUS.com/download/download.aspx?model=Eee%20pc%201005P&F_NAME=HotkeyService-1_15.zip&f_type=26&OS=29

  Note: Install the driver requires professional help. I suggest you to contact Asus to help you best in the installation of the drivers.

  You may also need to update the Chipset drivers. You can contact Asus to help you with this:

  Here is a link that will give you information about Support for Asus information:

  http://support.ASUS.com/contact/contact.aspx?SLanguage=en-us

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• DMI error when executing a recovery of Toshiba - Satellite A205

  I try my laptop recovery in the default original system and then I get these errors:

  "DMI. EXE - Application error"

  The statement to be made 0x7756lad5 reference memory at 0 x 00004235. The memory could not be read.

  Click on Ok to terminate the program. »

  Then after this error, I get this:

  "Toshiba Recovery Wizard.

  
  An error has occurred.

  Error: 03-EEEE-0000

  An error has occurred.
  Please press [OK] to turn on the computer. »

  I got new Ram chips earlier which is the problem?

  AFAIK compatible RAM modules have no negative influence on the recovery procedure.
  Can you please tell me what model of laptop do you have?
  You try to use the image of recovery for the first time?

• Qosmio F45-AV413 refurbished showing DMI.exe error when trying to restore

  Here's the problem:

  I formatted the original disc to install Vista in another language with my own Vista disc.
  After that, I couldn't do some drivers to work properly, so I decided to do a system restore.
  I didn't have the disc so I asked Toshiba for some DVDs. They send them to me and after insertion of the discs and choosing Toshiba utility to restore from the menu it appears a window saying error DMI.exe and some codes and the error "memory could not be read.
  After I pressed OK, it appears another window with this error "03-eeee-0000.
  After I press OK again. The disc is ejected and the computer turns off.

  I updated the bios to the latest version 1.9 and I changed the ram sticks with other ones that work well, but the problem persists.

  Searching in Google, I read that it may be something with the Toshiba DMI and it is fixed with a DMI update utility, but I have not found one for this laptop. Also, I read something about the original MBR who is not respected and Toshiba needed for restoration. I don't think it's OK, because I can install any OS I want with my laptop and I have to restore the original OS when I want to.

  So please, I ask to help with this problem.

  Thank you in advance.

  Hello

  DMI.exe is part of the recovery process that verifies material in order to ensure that you are trying to load your OS on a different machine.
  There is specific information inside the Toshiba hard drive so that DMI could restore your preactivated version of vista.

  You can install fresh windows vista and use the drivers on this page:

  [Click here | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modItemList.jsp?moid=1757693&rpn=PQF43U&ct=D L&BV_SessionID=@@@1588502434.1220287432@@@&BV_En = ccceadefddkhiekcgfkceghdgngdgmm.0 gineID]

• Unable to stop errors with acpi.sys ksetdd.sys

  Vista Windows can not remember if any service packs where in there or not but Prem home and it's a closed satellite toshiba worked very well before hand and then for the last week were not able to find out why when you turn it on, he says the entire f12 and f8 and tried all of the above but still the drivers fail to load windows the comp. is really completely useless right now I did happen to get a laptop that came with his recovery disks but she neither no den worked when I run toshiba recovery wizrd is executed, it ends with just a screen saying ERROR 03-EEEE-0000, and then click ok to stop his why similar wouldn't disks accompanying work with it in any case to completely redo windows not only restore cause it won't work UH I just on once again I am not worried about the files that I have on the computer I want to just the new deadline and if someone can help me please facilitate the instructions step by step, maybe even what the screen would look like if I do things right was doing things again and again for the last week and nothing had moved any further... Thanks for your time

  AD

  original title: drivers acpi.sys ksetdd.sys? Error recovery complete for Toshiba Recovery with discs 03-EEEE-0000 error

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Problem with the Toshiba recovery process, contact Toshiba at the link above.

  This isn't their recovery process, Microsoft.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if you do not want to save anthing:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A215-S7414 will not recovery disc read

  I need to restore my laptop to factory setting, but whenever I start the wizard of toshiba recory it stops and displays and error: 03-EEEE-0000.
  I know he can play discs b/c last time I put the 2nd drive instead of the 1st and the computer says to put 1 disc.
  When I made the same mistake that presented themselves. I tried to boot from the cd/dvd but it stil does not work. :(

  Hello

  Have you tried to boot from another bootable CD? I mean can start you Microsoft Windows CD or DVD in Vista?

  The error looks like the CD/DVD drive is not able to read and to start from the first recovery CD Toshiba.
  Maybe the disc is not more readable for this drive.

• Installation of Canon PIXMA MG5200 Wireless Printer gives the error code 0 x 00000643 on Windows Vista

  Original title: Wireless Printer put in place

  Trying to install the scanner software etc. on my new printer canon PIXMA MG5200, already implemented successfully using WPS, while it was printing ok, error code 0200 0000 documents came along with a "a newer version of MP readers is installed for cancelled installation. Uninstalling now left me unable to reinstall the printer link with my laptop with the advent of error code 0 x 00000643 up - help what I did?  Vista Home is my OS. Our other laptop which runs on Windows 7 is still printing ok but also not load the software. Canon told me to ask you to clean the registry? ! If this is what is needed, how can I do this, and surely the problem repeats whenever I try to install again. I tried the system restore before I loaded the software and no change.

  Hi AlisonHamilton,

  It is sufficient to indicate the complete error message you receive.

  Method 1: You can see the steps outlined in the article below, which deals with a similar question

  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).

  http://support.Microsoft.com/kb/944960

  Method 2:  You can run the fixit available in the link below

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************

• APP - PO - 14142:PO_MOAC_UTILS. Initialize-000: ORA-0000: normal, R12.2.4 EBS

  Hello

  We get the following when error access purchase order summary in the responsibility of the federal Government to purchase, United States. Please help on this issue.

  APP - PO - 14142:PO_MOAC_UTILS. Initialize-000: ORA-0000: normal, success

  Cause: A SQL error has occurred in PO_MOAC_UTILS. Initialize. The SQL error is ORA - 0000:norma, of success.

  Action: Take note of the error number and the actions that you were trying to perform. Contact your system administrator for more information.

  

  Please help on this.

  Thank you

  Jeremy.

  Hi all

  Now I'm able to access purchase order summary in the responsibility of the federal Government to purchase, United States.

  Invalid objects compiled after creating synonymous then issues resolved.

  Now, we have still a few invalid objects.

  SQL > alter package apps. AP_MASS_ADDITIONS_CREATE_PKG compile body;

  WARNING: The bodies of Package modified with compilation errors.

  SQL > show errors

  Errors for BODY of PACKAGE applications. AP_MASS_ADDITIONS_CREATE_PKG:

  LINE/COL ERROR

  -------- -----------------------------------------------------------------

  361/5 PL/SQL: statement ignored

  361/17 PL/SQL: ORA-00942: table or view does not exist

  560/7 PL/SQL: statement ignored

  793/17 PL/SQL: ORA-00942: table or view does not exist

  860/5 PL/SQL: statement ignored

  860/17 PL/SQL: ORA-00942: table or view does not exist

  1061/7 PL/SQL: statement ignored

  1298/17 PL/SQL: ORA-00942: table or view does not exist

  1373/6 PL/SQL: statement ignored

  1377/12 PL/SQL: ORA-00942: table or view does not exist

  1388/1 PL/SQL: statement ignored

  LINE/COL ERROR

  -------- -----------------------------------------------------------------

  1394/10 PL/SQL: ORA-00942: table or view does not exist

  1412/5 PL/SQL: statement ignored

  1416/14 PL/SQL: ORA-00942: table or view does not exist

  Thank you

  Jeremy.

• Change the SSD on Portege Z830

  I have a Z830, 3 years, ssd shows errors (chkdsk: Found.0000)

  Should I change the (128 GB) ssd to another?

  If Yes: what kind of ssd?

  concerning

  charlyr

  is it a toshiba tool to do the job of ssd?

  "" Toshiba does not provide any ' SSD repair tools.
  But to be honest, the SSD hardware malfunction can not be fixed... before SSD drive begin to malfunction, you should always back up the data.

• How to define upskin and downskin

  Hai, I need to know how to set upskin and downskin on the list... I tried this

  package com.cellapp.list.skin
  {
      import flash.display.Sprite;
      import flash.geom.Rectangle;
  
      import qnx.fuse.ui.display.Image;
      import qnx.fuse.ui.listClasses.CellRenderer;
      import qnx.fuse.ui.text.Label;
      import qnx.fuse.ui.text.TextAlign;
      import qnx.fuse.ui.text.TextFormat;
  
      public class ListSkin extends CellRenderer
      {
          /*UPSKIN*/
          protected var upSkin:Sprite;
  
          /*DOWNSKIN*/
          protected var downSkin:Sprite;
  
          /*SELECTEDSKIN*/
          protected var selectedSKin:Sprite;
  
          protected var gridRect:Rectangle;
  
          public function ListSkin ()
          {
              super();
  
              gridRect = new Rectangle(0,0, 768, 100);
  
          }
  
          override public function set data(value:Object):void
          {
              // TODO Auto Generated method stub
              super.data = value.data;
              updateUI();
  
              try{
                  upSkin          =   new Sprite();
                  upSkin.graphics.beginFill(0x000000);
                  upSkin.graphics.drawRect(0,0,768, 100);
                  upSkin.graphics.endFill();
                  upSkin.alpha    =   1;
                  upSkin.scale9Grid   =   gridRect;
  
                  downSkin            =   new Sprite();
                  downSkin.graphics.beginFill(0x000000);
                  downSkin.graphics.drawRect(0,0,768, 100);
                  downSkin.graphics.endFill();
                  downSkin.alpha  =   1;
                  downSkin.scale9Grid = gridRect;
              }
              catch(e:Error)
              {
                  trace("EEEE : " , e.message);
              }
  
          }   
  
          private function updateUI():void
          {
              trace("here");
              var img:Image = new Image();
              img.setImage(data.img);
              img.alpha               =   data.alpha;
              img.x = 568;
              img.y = 20;
  
              /*var backGround:Image          =   new Image();
              backGround.setImage(data.background);
              backGround.setPosition(0,0);*/
  
              var textFormat:TextFormat       = new TextFormat();
              textFormat.color                =   0x000000;
              textFormat.align                =   TextAlign.LEFT;
              textFormat.italic               =   true;
              textFormat.size                 =   47;
  
              var oneLable:Label              =   new Label();
              oneLable.alpha                  =   1;
              oneLable.text                   =   data.text;
              oneLable.x                      =   30;
              oneLable.y                      =   15;
              oneLable.format                 =   textFormat;
              oneLable.width                  =   768;
              oneLable.height                 =   100;            
  
              //addChild(img1);
          //  addChild(backGround);
              addChild(oneLable);
              addChild(img);
  
          }       
  
          override public function set state(value:String):void
          {
              // TODO Auto Generated method stub
              super.state = value;
  
              try
              {
                  trace("VALUE ", value);
                  if(value=="up")
                  {
                      setSkin(upSkin);
                  }
                  else
                  {
                      if(value=="down")
                      {
                          setSkin(downSkin);
                      }
                      else
                      {
  
                      }
                  }
              }
              catch(e:Error)
              {
                  trace("VALERR : ",  e.message);
              }
  
          }
  
      }
  }
  

  Any help is appreciated

  Thanks in advance...

  Hello!

  «"" You're almost here!»»»

  I see that in these two sprites (upSkin and downSkin), the color is black (0x000000) so you will not see the change.

  In addition, there is no function setSkin (at least it is not in the latest version of the SDK). So, I used sprites as a backdrop. In the service of the State (that you evaluate correctly), you must add the upSkin sprite when the State is in PLACE (by default) and also you must change for downSkin when the State of the cell is out of SERVICE.

  Something like this:

  override public function set state(value:String):void
  {
      super.state = value;
      if(value=="up")
      {                 upSkin = new Sprite();                 upSkin.graphics.beginFill(0x000000);                 upSkin.graphics.drawRect(0,0,768, 100);                 upSkin.graphics.endFill();                 upSkin.alpha = 1;                 addChild(upSkin);
          }        else if(value=="down")        {                 downSkin = new Sprite();
           downSkin.graphics.beginFill(0x01A8DF);
           downSkin.graphics.drawRect(0,0,768, 100);
           downSkin.graphics.endFill();
           downSkin.alpha = 1;                 addChild(downSkin);       }}
  

  In this way, you will see the background color change when you select a cell in the list.

  I hope it will work for you.