error 0x0000007B (0xf78a2524, 0xC0000034, 0x00000000, 0x00000000) after the installation of the new RAM

I get the BSOD when booting with the STOP: 0x0000007B (0xf78a2524, 0xC0000034, 0x00000000, 0x00000000) message. The computer is a Dell Dimension 8400. I installed the new ram to find this message and we tried him swinging back the RAM on the former with the problem still persists.

Hello

Very good chance you loosened a cable or connection when you replaced the
memory.

Check with Dell Support, their drivers and documentation online and ask in the Dell
forums for known issues.

Dell support
http://support.Dell.com/

Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

Dell forums
http://en.community.Dell.com/forums/
================================================================

Check the disk for malware:

Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
Integrable Hirem is another choice - more can be found using Google.

Trinity Rescue Kit - download on top right of the page
http://trinityhome.org/home/index.php?wpid=1&front_id=12

CD of Hirem boot is another good choice
http://www.hirensbootcd.NET/Download.html
http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

===================================================================

You can also save the data and re-install Windows 7. The hard drive can be set
another computer as a 2nd drive (the best) or in an external USB enclosure. Either would allow
allows you to copy the data to removable media such as CD, DVD or other USB drives.

Or you can use a boot Ubuntu CD to back up data.

Use Ubuntu Live CD to backup files from your Windows computer dead
http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

===================================================================

For slightly more:

BCCode: 7B 0x0000007B<-- read="" this="">

INACCESSIBLE_BOOT_DEVICE bug control has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.

Important information if you have received a STOP Code

If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.

If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

Cause

Bug INACCESSIBLE_BOOT_DEVICE control often occurs due to a failure of the boot device. During the initialization of the I/O system, the boot device driver could have no initialize the boot device (usually a hard drive). Initialization of file system may have failed because it does not recognize the data on the boot device. In addition, repartition the system partition or installing a new SCSI adapter or disk controller could encourage this error.

This error can also occur because of incompatible disc material. If the error occurred in the initial configuration of the system, the system have maybe installed on an unsupported drive or a SCSI controller. Some controllers are supported only by the drivers that are in the library of drivers Windows (WDL). (These drivers require the user to perform a custom installation.)


Resolution

This error always occurs during the startup of the system. This error often occurs before the debugger connection, kind of debugging can be difficult, if not impossible.

Fix a defective boot device: If a boot device is at fault, you must change the boot options. For more information changing these options, see Software Configuration on the target computer.

Solve a problem of incompatible hard disk: If the installation program automatically detects the controller, you may have to skip the detection and the disc of the specific manufacturer allows to load the driver. Also, check the availability of updates for the firmware of the system BIOS and SCSI controller. Updates of this kind are usually available on the website or BBS of the hardware manufacturer.

Delete all material recently added, especially of hard disks or controllers, to see if the error is resolved. If the problematic material is a hard drive, the firmware version of the drive may be incompatible with your version of the Windows operating system. Contact the manufacturer for updates. If you have removed another material element and the error is resolved, conflicts of port IRQ or i/o likely exist. Reconfigure the new device according to the manufacturer's instructions.

Confirm that the hard disk drivers, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

If you have recently added a driver, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

In addition, check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

This error can also occur due to corruption of the hard drive. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

If you cannot start the system in the last known good configuration, you should try to boot from the Windows CD. Then, you can run Chkdsk from the Repair Console.

Warning   If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

If your system has SCSI adapters, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination. For IDE devices, define the IDE port integrated as primary only. Also check each IDE device for setting good master/subordinate/stand alone . Try to remove all IDE devices except for the hard drives. Finally, check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error.

BCCode: 7B 0x0000007B<-- read="" this="">
* 1138.html? order = votes http://www.faultwire.com/solutions-fatal_error/Check-for-viruses-on-your-Computer-0x0000007B-

=================================================================

If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
protected. The manufacturer of your system will also sell the physical DVD cheap since you already
Clean Windows. You can also do an ERD on another computer.

Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
return and then try to startup repair.)

How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.html

What are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

Try the disk Options recovery or Windows 7 startup repair.

How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.html

Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

sfc/scannow

How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

Then run checkdisk (chkdsk).

How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html

Retry After Chkdsk startup repair.

If after those you can try the system restore to fashion without failure or the valuation or Windows 7
disc.

How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html

--------------------------------------------------------------------

If you need to repair disks - these help repair Windows not re-install.
Often an ERD will help you when the recovery disk is not - use OPTION 2 to
make the disc.

How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

======================================

If necessary:

What to do if Windows does not start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.html

What are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials

I hope this helps.

Tags: Windows

Similar Questions

  • Blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

    I have my Acer 5920 laptop, 2 GB of RAM and 160 hard drive, last stop system time correctly with all the files to day, but when I restart then comes windows XP Jean-Christophe and then a blue screen with the error. Nor I have install new software or remove something in the laptop. My system was perfect, and that was before the last stop.
    I have Windows XP SP2-teacher-pack. I have the original CD of this package.
    But when I use the CD then nothing is happen and come same messgae of error. I do not have any other CD bootable for windowXP except your originalCD.
    Please suggest me what I should do to fix my probem. I'm not to much expert for the formatting and other things computer.

    After reading your following suggession:
    Here are a few things to try:
    The first thing to do is to boot your system and start pressing F8 as soon as it starts booting.  You will get the Windows startup options screen.  Select "Disable automatic restart in the event of system failure" and let it restart.  When it starts, it can now stop with an error screen and give an error message and code.

    Disconnect all external devices (printers, USB Hub, drives external, etc.) and try to start.

    I got the result of the error that comes on a blue screen after you follow your process-blue screen with STOP error 0x0000007B (0xBA4CF524, 0xC0000034, 0x00000000, 0x00000000)

    Thanks in advance for help
    What about nice Rajneesh

    Just one quick response for others...

    Go to your bios to change the mode of training of your s - ata AHCI or IDE Compatible mode or all that apply :) Windows XP is not like SATA, because it has no native support for it. At the start of the second phase of a Setup program, it would fail with this BSOD.

    Also read the following Microsoft article that describes many other causes (including file system damage):Troubleshooting of errors "Stop 0x0000007B" in Windows XP Advanced

    Sometimes, your BIOS will provide its default settings after a system crash or a configuration. Should not happen, but it is...

    For BIOS-discussions, see: 0x0000007B 0xBA4cf524 - Forum of Support PC - Free Computer help , XP installation: * STOP: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000)? - Page 4 - Cyber Tech Help Support Forums , 0x0000007B (0xBA4CF524 - Google zoeken .)

    Have fun, and... Peace!

    Devvie

    ~ ~ ~ * E-mail address is removed from the privacy * ~ ~ ~

    CONARE nullius momenti videri fortasse missilibus careant
    ------
    All the spelling mistakes are my own and may not be distributed under the GNU General Public License! -(© 95 1 by Coredump; 2-10 by DevNullius)

  • error 0x0000007b (0xf78d2524, 0xc0000034 0x00000000 0x00000000)

    My son has an acer 5735 laptop that was infected by some kind of virus or spyware. Tried to format the hard drive and reinstall windows but had the error 0x0000007b (0xf78d2524, 0xc0000034 0x00000000 0x00000000). So I bought a new hard drive and got the same message. I don't know what to do, I read several possible fixes but do not know what I should try. Please help if you can. Thank you!

    Hi Djlhope,

    You receive the STOP error: 0x0000007B, for various reasons. You can access the links below and follow the steps in the article to resolve error STOP 0x0000007B on your computer.

    http://support.Microsoft.com/kb/324103

    Hope this helps and let us know the result.

    Thank you and best regards,

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Compaq Presario C303NR is not completely put on after the new RAM upgrade

    Hello Paul,

    It's Tammy. I finally took the time this morning to upgrade the ram in my laptop, model C303nr. And I am desperate need help because something has gone terribly wrong.

    The laptop starts up to my office, I get nothing but then move lines, a little like snow tv, but more structured. I took the new memory on a couple of times and tried to re-sitting, but I get the same results. Furthermore, when I tried to put the old memory, exactly the same thing happens. Have I completely broke my laptop?

    Can you or anyone out there please help me. This is my first attempt to do something like that and I feel absolutely sick results.

    Clinging to hope for a fix.

    Tammy

    Hi Paul,.

    I must say once again, you have a way very appreciated to bring the balance to my pc problems.

    During my first attempt to install new ram not worked, I thought that I had inadvertently he damaged everything trying to embed. (It is certainly not a room of heap for the maneuver of the ram, clips and fingers! Besides, while trying to stay grounded.) Then, when I couldn't get the old RAM to work either, I thought I had I damaged the laptop everything somehow. It was a horrible feeling.

    Even after that I finally got the new ram to work, I felt bad to not get it in correctly the first time. I felt as if I should have been able to prevent any inconvenience on my part. However, when I read that you have recently encountered a problem with ram of your son, your post made me appreciate that sometimes things happen if its your first time or umpteenth time to do.

    Thank you for giving me the space to hold myself.

    In addition, I can imagine how the ram of your son was stuck. If that does not damage its ram, then maybe ram is a bit more durable than the shell egg-nitroglycerin, I felt... like manipulating its fragility should not always be a concern.

    I wish you the best,

    Tammy

  • Satellite L675-10T stucks in a black screen after the new RAM upgrade

    Hi all

    I recently decided to upgrade the memory in my laptop pretty.
    I went online, has adapted Rams and ordered.

    What I got are 2 of them:
    http://www.offtek.co.UK/RAM-specification/Toshiba/Toshiba-laptop-memory/satellite-L675-10T/pid921300

    The installation is very easy, but as soon as I turn on my laptop, it stucks in a black screen with a straight white line underscore.

    I guess it's an incompatibility problem?
    Could you please help me?

    Thank you.

    I think you're right, it seems that the modules are not totally compatible, even if the online retailer page says they are
    You can remove the new RAM modules just to check if the laptop to boot up properly I guess correctly the unit upwards.

    Solution? Use a different RAM modules I had good experience using modules from Kingston, they might be a little expensive, but I think they should work correctly.

  • stop; 0x0000007B (0xF78A2524, 0xC0000034, 0x00000000, 0x00000000)

    Hello

    Can someone tell me how to solve this problem!

    Thanks Chris

    Hello

    ·        When you get this error message?

    ·        Remember to make changes to the system?

    I suggest you to follow the steps mentioned in the links below and let us know if the problem is solved or not.

    Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

    http://support.Microsoft.com/kb/316401

    Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

    http://support.Microsoft.com/kb/324103

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Blue error screen 0x0000007B (0xF78DA63C, 0xC0000034, 0x00000000, 0x00000000)

    Ok. I have Ubuntu installation. While re - partition my drive, the computer froze during resizing a NTFS partition, and while in Ubuntu Live (from the CD) he told me to run chkdsk f, then restart twice. So I found an old XP disc and tried to boot from it in mode of recovery etc but he finished the preliminary tasks and starts to run windows, I get this error blue screen (blue screen error 0x0000007B (0xF78DA63C, 0xC0000034, 0x00000000, 0x00000000)).

    I don't understand why I can't launch the recovery on the drive mode to try to recover my hard drive. Help!

    Hello

    I would recommend that you follow the steps in this article and see if the problem still occurs.
    Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

    See also:

    http://social.technet.Microsoft.com/forums/en-us/itproxpsp/thread/a4428641-e7f4-4C57-8afb-4dedfb098670

  • How to overcome error * stop: 0X0000007b (0xf78d2524, 0xc0000034, 0x00000000, 0x00000000)

    Hello..

    I'm editing O. S XP for my laptop of Lenovo ideapad Z560 after reformulating BIOS and copy the files over and before the program installation the following error will come (it has no virus in my laptop).

    the error is: * stop: 0X0000007b (0xf78d2524, 0xc0000034, 0x00000000, 0x00000000)

    before I was using two operating systems on different (windows7 & xp2) disks I thought of removingtwo os and re install windows xp3 then I had been troubled by the error mentioned above

    Please give me the solution for this problem

    Hello

    I suggest you to follow the steps in this link and check if it helps:
    http://support.Microsoft.com/kb/316401

    For more information, see this link:
    http://support.Microsoft.com/kb/324103

    It will be useful.

  • Lenovo SL500 Windows Vista crashed with STOP: 0x0000007B (0x80599BB0, 0xC0000034, 0x00000000, 0x00000000) error and won't start.

    Original title: Lenovo SL500 Windows Vista crashed with STOP error message and won't start

    Hello peoples,
    I just installed an iMicro Bluetooth adapter on my computer, and then I wanted to restart my computer. When I turned it on, loading like regular until right after the Vista loading screen, when the Blue Screen of Death (a blue screen with an error on this subject) flashed for about 1/2 second and then restarted my computer. Then he asked me if I wanted to load startup repair or simply start WIndows normally and I chose to start WIndows normally, but it's the same thing, so when the computer is restarted again, I chose the Startup Repair. He said that if I inserted an external device in my computer for me to remove it. But I had no external devices in my computer at the same time! I already pulled the iMicro adapter! So when my computer restarted again, I pressed the button Lenovo Care and charge of Lenovo Rescue and Recovery 4. (This is where I am now, typing away in the Opera browser.) I tried to find help, but could not find anythign useful so far. I installed for many drivers, updates, patches, etc. But none have anything to remove the blue screen of death. Now, after 7 hours, I really frustrated, and this is my last hope! (I don't want to save my hard drive and reinstall, because I paid more than 250 applications and more than 270 free programs on my computer! Of more, more than 350 iPad apps, of which a few are paid! Oh and 700 iBooks!)
    Help, please! I'm really desperate right now, and any help would be appreciated!
    Thanks in advance!

    PS I run Windows Vista Home Basic SP2 (I think) on a Lenovo ThinkPad SL500 (NOT SL500c!)

    PPS Lenovo all computers have this Lenovo Rescue Recovery 4, which is like an operating system of its own. It has a browser that you can install updates and other things. Right now I use Rescue and Recovery. Thanks again in advance and please answer my question! I had this problem for a week and I'm in school tomorrow! Thanks again!

    EDIT: The error message went like this:

    A problem has been detected and Windows has shut down to prevent damage to your computer.

    If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

    Check for viruses on your computer. Remove the hard drives newly installed on the hard disk controllers. Check your hard drive to ensure that it is configured and completed proeprly. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

    Technical information:

    STOP: 0X0000007B (0X80599BB0, 0XC0000034, 0X00000000, 0X00000000)

    Thanks for the billionth time!

    have you tried diving into the blue tooth to the computer with a usb cable before starting the computer u? Sometimes it works

  • STOP 0X0000007B 0XF7A1863C 0XC0000034 0X00000000 0X00000000

    Original title: STOP CODES

    STOP 0X0000007B 0XF7A1863C 0XC0000034 0X00000000 0X00000000, WHICH IS GOING ON THIS MACHINE IT WILL START TO A CD AND STOPS IN THE MIDDLE OF LOADING WINDOWS.   WHAT CAN BE DONE RESSEMELABLE THE PROBLEM?  DELL OPTIPLEX 755

    Hello

    1 did you the hardware changes to your computer?
    2. you are trying to install Windows XP? When you get this error message?

    This problem can occur if the new motherboard contains an embedded IDE controller that has a different chipset that the card mother original. See the articles below and check if this can help you to solve this problem.

    Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP
    http://support.Microsoft.com/kb/324103

    Error message "STOP 0x0000007B" when you restart your Windows XP-based computer
    http://support.Microsoft.com/kb/316401

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • 0x0000007B (0x80D86B58, 0xC0000034, 0x00000000, 0 x 0000000)

    I recently changed my motherboard for a better and at the start of windows 7 is I get this BSOD error

    STOP: 0X0000007B (0X80D86B58, 0XC0000034, 0X00000000, 0 X 0000000)

    What does this mean and how to solve this? I read somewhere that this has to do with the hard drive. I know that he sees the HARD drive because it appears in the BIOS and I've accessed via diskpart although the drive letters have changed for some reason any. I ran the recovery without success. Says he can not solve the problem manually.

    If the startup repair does not work, try a repair installation before wipe you it: http://www.sevenforums.com/tutorials/3413-repair-install.html

  • P2V of win 7 - getting STOP: 0x0000007B (0x80786B50, 0xC0000034, 0x00000000, 0x00000000)

    Hi, trying to P2V a win 7, starting VM to BSOD - STOP: 0x0000007B (0x80786B50, 0xC0000034, 0x00000000, 0x00000000).

    Converted into ' slots tension "on the local computer.

    V5.0.0 build 470252 Converter standalone

    (I tried v5.1 but had an error "unable to get hardware information", so down converter versions)

    -writes the new virtual machine on a separate SATA drive, attached to the local computer

    -attempt to start the virtual machine using vmware workstation - version 9.0.2 build-1031769 (although the destination version of the converter is workstation 8)

    -for converting the value of the "disk controller" IDE

    Attached are the vmware.log and .vmx files

    I know STOP 0x0000007B is well worn territory and I googled and tried everything I have found over the past two days.  I must be missing something basic, but don't see it. I'm pretty frustrated at this point and could use a helping hand.  Any help would be greatly appreciated.

    Thank you

    Jay

    Welcome to the community,

    for Windows 7, the controller, you have to select in the wizard's "LSI Logic SAS".

    André

  • After the new installation Mobo and CPU, HDD IDE does not start in XP.

    I have improved my Athlon XP a new motherboard with an Athlon XII after 5 years. XP does not start and gives the following error:

    0x0000007B (0xF789E528, 0xC0000034, 0x00000000)

    I guess that's due to the used on the boards of different drivers. I can't boot mode safe. How can I fix?

    Help, please. Thank you!

    Hello Riggs614

    After Exchange of this type of major equipment, you will have to make at least a "repair" of XP.

    A repair will not lose any data, other that the Service Pack (if not on CD), no matter what Windows updates and unsigned, drivers that will need to be re-installed later.

    Stay offline for repairs and not go online again without a firewall is activated. After the repair of XP, install the Service Pack (if necessary), firewall, then you must install to the all the critical updates then.

    How to fix XP.

    1. start the computer from your Windows XP CD.

    2. When you see the "Welcome" screen press [Enter] to start the configuration of Windows.

    Note: Do not choose "to repair a Windows XP installation using Recovery Console, press R", not wanting to load the Recovery Console.

    3. accept the license agreement and Windows will search for existing installations of Windows.

    4. Select the XP installation that you want to repair in the list, and then press [R] to start the repair. Setup copies the necessary files to the hard drive, and then restart.

    5. do not press a key to boot from CD when the message appears. Setup then continues as if she were doing a clean install, but your applications and settings are preserved.

    http://www.theeldergeek.com/repairing_windows_xp.htm

    Way to scroll to the bottom of page for

    Windows installation CD - repair current Installation

     

    http://michaelstevenstech.com/XPrepairinstall.htm

    .

  • After the new installation of hard drive and a reinstall of Windows XP on I: function used Drive, Windows Update

    After the new installation of hard drive and a reinstallation of Windows XP I: Drive, Windows Update continually responds with: "Files required to use Windows Update are longer registered or installed on your computer" by clicking on the option to register or reinstall results by bike to the same error.

    Hi TedWie,

    Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and typeWinver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

    Windows XP SP3.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

    Windows XP SP2. (According to THE level of SP)

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

    Note:
    If your system has a Processor AMD, download and install before installation of the SP3 of XP, theUpgrade utility Microsoft for processors not intel

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

    If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

    How to troubleshoot a SP3 Installation fails.

    http://support.Microsoft.com/kb/950718

    Let us know if this solves the problem.

  • Can not start the server of the University Complutense of MADRID after the new installation of 11.1.1.8 on Microsoft server 2008 R2 SP1 64-bit EA

    Hi all

    After the new installation of the WCC 11.1.1.8 on Microsoft server 2008 R2 SP1 64-bit UCM_server1 EE cannot start. (Please see trace below). WCC 11.1.1.7 work fine in this environment.

    Steps to follow:

    1. installation of jrockit - jdk1.6.0_45 - R28.2.7 - 4.1.0

    2. installation of WLS 10.3.6

    3. installation of the WCC 11.1.1.8

    4 creating the UCR 11.1.1.8 schema

    5. creation of field of config.cmd with AdminServer, UCM_server1, IBR_server1

    6. run Admin - (success)

    7 run (optional) NodeManager - (success)

    8 run UCM_server1 - failed

    Still not work after having patched MLR 1 for WCC 11.1.1.8 or upgrade 11.1.1.7.

    Log files we can see this problem caused by the JniNativeOsUtils.dll file in ' < Middleware Home > \Oracle_ECM1\ucm\idc\components\NativeOsUtils\lib\windows-amd64\7.2.1.1.

    I have replaced JniNativeOsUtils.dll with the same 11.1.1.7 file version and UCM_server1 started working

    I got errors when starting (syNativeOsUtilsNotLoaded and UnsatisfiedLinkError - you can raise in trace below), but COE upward and the works.

    I also get error when you try to start the utility SystemProperties or ComponentWithard:

    Activation context generation failed for "C:\Oracle\MIDDLE~1\USER_P~1\domains\WCC_DO~1\ucm\cs\bin\SystemProperties.exe." Load Assembly Microsoft.VC80.MFC, processorArchitecture = "amd64", publicKeyToken is "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.762' is not found. Please use sxstrace.exe for detailed diagnosis.

    Any ideas?

    Thank you

    Leon

    -------------------------------------------------------------------------------------------------------------------------

    ERROR:

    javax.servlet.ServletException: could not start a deployment of servers of IDC.

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1268)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: java.io.IOException: csServletFailedToFullyInitialize

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:139)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1257)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: intradoc.common.ServiceException:

    at intradoc.server.IdcServerManager.init(IdcServerManager.java:252)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1259)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: intradoc.data.DataException:! Abandoned facility.

    at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:554)

    at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

    at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)

    at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1259)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: intradoc.common.ServiceException:! csInitSecurityError

    at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:140)

    at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)

    at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)

    at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)

    at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)

    at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)

    at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

    at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:328)

    at intradoc.server.IdcServerManager.init(IdcServerManager.java:101)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1259)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: intradoc.common.ServiceException:! syFileUtilsUnableToCreateSpecifiedDir, C:/Oracle/MEDIUM ~ 1/USER_P ~ 1/areas/WCC_DO ~ 1-AAU/cs/config/private

    at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:570)

    at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)

    at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)

    at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)

    at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:76)

    at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)

    at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)

    at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:574)

    at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)

    at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

    at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:328)

    at intradoc.server.IdcServerManager.init(IdcServerManager.java:101)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1259)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: java.lang.AssertionError:! syNativeOsUtilsNotLoaded

    at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:452)

    to intradoc.common.NativeOsUtilsBase. < init > (NativeOsUtilsBase.java:360)

    to intradoc.common.NativeOsUtils. < init > (NativeOsUtils.java:28)

    at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:566)

    at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)

    at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)

    at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)

    at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)

    at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)

    at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)

    at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)

    at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)

    at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

    at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)

    at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:626)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1257)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: java.lang.UnsatisfiedLinkError: intradoc/common/NativeOsUtilsBase.getNativeVersion () Ljava/lang/String;

    at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:448)

    to intradoc.common.NativeOsUtilsBase. < init > (NativeOsUtilsBase.java:360)

    to intradoc.common.NativeOsUtils. < init > (NativeOsUtils.java:28)

    at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:566)

    at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)

    at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)

    at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)

    at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)

    at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)

    at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)

    at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)

    at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)

    at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

    at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)

    at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:626)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1257)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Hi all

    Cause of problems is the lack of 'Visual C++ 2005 SP1 Redistributable Package'

    Environment works great after installing the two versions (x 86 and x 64)

    Thank you

    Leon

Maybe you are looking for

  • Why my old Apple ID get on my iPad and iPhone?

    I recently changed my Apple ID. However; my iPhone and iPad continue to flow upward with an error message indicating that my ID Apple is used about 100 miles away from me and showing the old address of e-mail as my ID. I'm also unable to get my Apple

  • Qosmio G30-163 asks if I want to put HDD2 for mirroring

    I just got my new G30-163. Whenever I turn it on it asked if I would like to configure HDD2 for mirroring. I always press Cancel, but it repeates demand with every start upward. As a result, my second drive does not appear and cannot be used. I tried

  • Pavillion DV-2001TX: I can not find the diver of the multimedia controller

    I can't find a driver for the multimedia controller on Win 7 64 bit for a HP Pavilion dv6-2001tx.  The information I have in Device Manager are: "Multimedia controller". Type of device: other devices Manufacturer: unknown Location: PCI Bus 4, device

  • How to upgrade an array of objects?

    Dear friends,I have a number of objects stored in a table.It seems that the table does not point to objects, but has copies.The element of the array is only updated with the notation table [index] prop, not with the object.prop notation.It would be p

  • vSphere Licensing 5.1: rights of vCPU

    Hi allI wonder about the rights of vCPU by vSphere edition.In the standard edition, the right of vCPU is 8.Does this means:(1) VM can have max of 8 socket with 1 core per socket(2) VM can have max of 8 shooting BUT the number of per-socket basis may