error 0X8007001F

Similar Questions

• Cannot install updates error: 0X8007001F

  Title: 0X8007001F

  I get the message "Failed to install" on security updats goes bact 07/15/12.  I have tried a new IE8, only clean startup, check virus etc help.  I think I have something in the registry trashed by the runnig AVG PC tune up.  Mayby not their fault fault but the timing is right.  Also: If I go in run and type msconfig not found it.  I can get there by entering the full address.  $I also has managed to erase all my points of restor system while in msconfig - not too bright! $ Anyway, any help will be appreciated.

  Hello

  -Did you do changes on the computer before this problem?

  Method 1: Run the Microsoft FIXIT from the link below and check if the problem persists.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  I suggest to maintain the computer in clean boot mode and check if the problem persists.
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  How to solve a problem by performing a clean boot in Windows XP?
  http://support.Microsoft.com/kb/310353
  Note: After the troubleshooting steps, refer to step 7 of the binding of boot is a way of putting your computer to normal startup mode.

  Method 3: You can try to reset the Windows update components and check if you can install the updates.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 4: Follow the steps mentioned below and check.

  1. click on Start, click all programsand then click Windows Update
  2. to view your Update history, click view your update history in the left pane of control Panel.
  3. check the State of the question.

  Cannot install Windows updates
  http://support.Microsoft.com/kb/555461

  Method 5: Try manually install updates from Microsoft Download Center in the clean boot state.
  a. visit the Microsoft Download Web site.
  http://www.Microsoft.com/en-us/download/default.aspx
  b. Enter the number in the search field and press ENTER.
  c. double-click on the downloaded file.
  d. you can either click on Run to start the installation, or you can click on save and save it on the desktop and run the installation once the update is completely downloaded.

  Hope this information helps.

• I can't install windows update error 0x8007001F

  (KB2719985) (KB2698365) (KB2691442) (KB2655992) (KB2718523)

  Restart your PC and launch Windows Update Fixit:

  http://support.Microsoft.com/mats/windows_update/

• Error code: 0x8007001f and six critical updates failed to install.

  Original title: I have six critical updates which will not refresh error.

  I have six critical updates which does not update error 0x8007001f code anyone with an answer

  Hi GeraldRichter,

  You can try the following steps and check if it helps.

  Method 1:

  You can try to reset the Windows update components and check if you can install the updates.

  How to reset the Windows Update components?

  Method 2:

  If the problem persists, then put the computer in a clean boot state and check if you can install

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can check the article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows XP:

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

  Method 3: Try manually install updates from Microsoft Download Center in the clean boot state.

  a. visit the Microsoft Download Web site.

  b. enter the number in the search field and press enter.

  c. double-click on the downloaded file.

  d. you can either click run to start the installation, or you can click on Save and save it on the desktop and start the installation after the update is completely downloaded.

• x 80070002 error when trying to install Windows 8.1

  Hello.

  I try to install Windows 8.1 Windows 8 and I get the error message x 80070002.

  I can't update the other applications also.

  Does anyone have a solution?

  Thank you.

  I get this in the journal of setuperr:

  Setuperr.log
   
  Windows $ CAN/BT/sources/Panther
   
   
  2014 09/11 21:44:40, SetupMgr MOUPG error: error reading
  Store data in registry M². Data = [StoreSetupDownloadCancel], HRESULT =
  [0 x 80070002]
  2014 09/11 21:44:40, SetupMgr MOUPG error: error reading
  Store data in registry M². Data = [StoreSetupDownloadPause], HRESULT =
  [0 x 80070002]
  2014 09/11 21:47:48, error MOUPG
  CSetupManager::Execute (363): result = 0x800705BB
  2014 09/11 21:47:48, error MOUPG CSetupHost::Execute (209):
  Result = 0x800705BB
  2014 09/11 21:47:55, SetupMgr MOUPG error: error reading
  Store data in registry M². Data = [StoreSetupDownloadCancel], HRESULT =
  [0 x 80070002]
  2014 09/11 21:47:55, SetupMgr MOUPG error: error reading
  Store data in registry M². Data = [StoreSetupDownloadPause], HRESULT =
  [0 x 80070002]
  2014 09/11 22:19:56, error [0x08039d] MIG cannot add mapping for
  Profile of user C:\Users\g_moo_000. Error: 1009: Win32Exception: configuration
  Registry is corrupt. [0x000003F1] __cdecl
  MIG::CIndirectKeyMapper:CIndirectKeyMapper(Class_UnBCL::String_*,struct_HKEY__)
  *, Class UnBCL::String *, class UnBCL::String *, int, int, const
  MIG::HiveLoadRetryOptions *) [gle = 0x000000cb]
  2014 09/11 22:19:56, error [0 x 080801] MIG profil_utilisateur loading
  error. Abandonment as a result of an external request. [gle = 0x000000cb]
  2014 09/11 22:19:56, error InitDownlevelOCMode
  an exception: Win32Exception: error loading user profile. Abandonment due to
  external demand. : the specified user does not have a valid profile.
  [0x000004E5] void __cdecl Mig::COnlineWinNTPlatform:ProcessUser (class
  MIG::CRegistryDataStore *, class Mig::CRegistryDataUnit *, UnBCL::String, class
  (*, Class UnBCL::String *, int, int)
  2014 09/11 22:19:56, error Exception MIG OC:
  OC::CDownlevelOCStore:CDownlevelOCStore: InitDownlevelOCMode of motor
  has failed.
  2014 09/11 22:19:56, error MS could not save the State of OC.
  Error: 0x8007001F
  2014 09/11 22:24:23, error [0x08039d] MIG cannot add mapping for
  Profile of user C:\Users\g_moo_000. Error: 1009: Win32Exception: configuration
  Registry is corrupt. [0x000003F1] __cdecl
  MIG::CIndirectKeyMapper:CIndirectKeyMapper(Class_UnBCL::String_*,struct_HKEY__)
  *, Class UnBCL::String *, class UnBCL::String *, int, int, const
  MIG::HiveLoadRetryOptions *) [gle = 0x000000cb]
  2014 09/11 22:24:23, error [0 x 080801] MIG profil_utilisateur loading
  error. Abandonment as a result of an external request. [gle = 0x000000cb]
  2014 09/11 22:24:23, MigStartupOnline error caught
  exception: Win32Exception: error loading user profile. Abandonment due to external
  request: the specified user does not have a valid profile. [0x000004E5] empty
  __cdecl Mig::COnlineWinNTPlatform:ProcessUser(class_Mig::CRegistryDataStore)
  *, Class Mig::CRegistryDataUnit *, class UnBCL::String *, UnBCL::String, class
  (*, int, int)
  2014 09/11 22:24:23, SP pSPDoMainGather error: engine
  initialization failed with error: 0 x 00000004
  2014 09/11 22:24:23, SP CGatherData error: Migration
  failure of the phase. Status: 4 [gle = 0 x 00000012]
  2014 09/11 22:24:24, SP operation failed error: collect
  data, the field of action: everything. Error: 0 x 80070004 [gle = 0x000000b7]
  2014 09/11 22:24:24, error MOUPG MoSetupPlatform:
  ExecuteCurrentOperations reported failure! [gle = 0x000000b7]
  2014 09/11 22:24:24, MOUPG MoSetupPlatform error: help
  
  transform the error code: [0x80070004] [gle = 0x000000b7]
  2014 09/11 22:24:24, error MOUPG
  CDlpTransformDataMigrate::MigrateData (1477): result =
  0 x 80070004 [gle = 0x000000b7]
  2014 09/11 22:24:24, error MOUPG
  CDlpTransformDataMigrate::TransformFile (1095): result =
  0 x 80070004 [gle = 0x000000b7]
  2014 09/11 22:24:24, error MOUPG
  CDlpTransformDataMigrate::Execute (544): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  
  CDlpTask::ExecuteTransform (3154): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CDlpTask::ExecuteTransforms (3327): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG CDlpTask::Execute (1550):
  Result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CSetupManager::ExecuteTask (1323): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CSetupManager::ExecuteTask (1288): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CSetupManager::Execute (413): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CDlpTask::RestartTransform (2444): result = 0xC1800107
  2014 09/11 22:24:29, error CONX [UploadTelemetryFile]
  failed to download telemetry files [0x803d0013]
  2014 09/11 22:24:29, error CONX [SendTelemetry] has no
  Download the file of telemetry on AEStat
  2014 09/11 22:24:29, error MS
  CSqmSession::SetSQMEndTime: Cannot set EndTime for datapoint with Id = 12576.
  DataPoint not found
  2014 09/11 22:24:29, error MS does not have end M²
  time. HR = 0 x 80070490
  2014 09/11 22:24:29, develop the error MOUPG: Error reporting
  Finalize time: [0x80004005]
  2014 09/11 22:25:45, error MOUPG CSetupHost::Execute (209):
  Result = 0x80070004

  Hello

  Welcome to the Microsoft community forums.

  Use the troubleshooter in this article to resolve errors Windows Update '0 x 80070002' or '0 x 80070003 '. This problem occurs when some files in the update of Windows are missing, even if the update is downloaded and extracted successfully.

  Also, follow the additional manual steps in this article and check if that helps:

  Error code Windows Update '0 x 80070002' or '0 x 80070003 '.

  http://support.Microsoft.com/kb/910336/en-us

  Also see this Microsoft article:

  Update to Windows 8.1 of Windows 8

  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• x 80070002 error when trying to install Windows 8.1 Windows 8

  Hello.

  I try to install Windows 8.1 Windows 8 and I get the error message x 80070002.

  I can't update the other applications also.

  Does anyone have a solution?

  Thank you.

  I get this in the journal of setuperr:

  Setuperr.log
   
  Windows $ CAN/BT/sources/Panther
   
   
  2014 09/11 21:44:40, SetupMgr MOUPG error: error reading
  Store data in registry M². Data = [StoreSetupDownloadCancel], HRESULT =
  [0 x 80070002]
  2014 09/11 21:44:40, SetupMgr MOUPG error: error reading
  Store data in registry M². Data = [StoreSetupDownloadPause], HRESULT =
  [0 x 80070002]
  2014 09/11 21:47:48, error MOUPG
  CSetupManager::Execute (363): result = 0x800705BB
  2014 09/11 21:47:48, error MOUPG CSetupHost::Execute (209):
  Result = 0x800705BB
  2014 09/11 21:47:55, SetupMgr MOUPG error: error reading
  Store data in registry M². Data = [StoreSetupDownloadCancel], HRESULT =
  [0 x 80070002]
  2014 09/11 21:47:55, SetupMgr MOUPG error: error reading
  Store data in registry M². Data = [StoreSetupDownloadPause], HRESULT =
  [0 x 80070002]
  2014 09/11 22:19:56, error [0x08039d] MIG cannot add mapping for
  Profile of user C:\Users\g_moo_000. Error: 1009: Win32Exception: configuration
  Registry is corrupt. [0x000003F1] __cdecl
  MIG::CIndirectKeyMapper:CIndirectKeyMapper(Class_UnBCL::String_*,struct_HKEY__)
  *, Class UnBCL::String *, class UnBCL::String *, int, int, const
  MIG::HiveLoadRetryOptions *) [gle = 0x000000cb]
  2014 09/11 22:19:56, error [0 x 080801] MIG profil_utilisateur loading
  error. Abandonment as a result of an external request. [gle = 0x000000cb]
  2014 09/11 22:19:56, error InitDownlevelOCMode
  an exception: Win32Exception: error loading user profile. Abandonment due to
  external demand. : the specified user does not have a valid profile.
  [0x000004E5] void __cdecl Mig::COnlineWinNTPlatform:ProcessUser (class
  MIG::CRegistryDataStore *, class Mig::CRegistryDataUnit *, UnBCL::String, class
  (*, Class UnBCL::String *, int, int)
  2014 09/11 22:19:56, error Exception MIG OC:
  OC::CDownlevelOCStore:CDownlevelOCStore: InitDownlevelOCMode of motor
  has failed.
  2014 09/11 22:19:56, error MS could not save the State of OC.
  Error: 0x8007001F
  2014 09/11 22:24:23, error [0x08039d] MIG cannot add mapping for
  Profile of user C:\Users\g_moo_000. Error: 1009: Win32Exception: configuration
  Registry is corrupt. [0x000003F1] __cdecl
  MIG::CIndirectKeyMapper:CIndirectKeyMapper(Class_UnBCL::String_*,struct_HKEY__)
  *, Class UnBCL::String *, class UnBCL::String *, int, int, const
  MIG::HiveLoadRetryOptions *) [gle = 0x000000cb]
  2014 09/11 22:24:23, error [0 x 080801] MIG profil_utilisateur loading
  error. Abandonment as a result of an external request. [gle = 0x000000cb]
  2014 09/11 22:24:23, MigStartupOnline error caught
  exception: Win32Exception: error loading user profile. Abandonment due to external
  request: the specified user does not have a valid profile. [0x000004E5] empty
  __cdecl Mig::COnlineWinNTPlatform:ProcessUser(class_Mig::CRegistryDataStore)
  *, Class Mig::CRegistryDataUnit *, class UnBCL::String *, UnBCL::String, class
  (*, int, int)
  2014 09/11 22:24:23, SP pSPDoMainGather error: engine
  initialization failed with error: 0 x 00000004
  2014 09/11 22:24:23, SP CGatherData error: Migration
  failure of the phase. Status: 4 [gle = 0 x 00000012]
  2014 09/11 22:24:24, SP operation failed error: collect
  data, the field of action: everything. Error: 0 x 80070004 [gle = 0x000000b7]
  2014 09/11 22:24:24, error MOUPG MoSetupPlatform:
  ExecuteCurrentOperations reported failure! [gle = 0x000000b7]
  2014 09/11 22:24:24, MOUPG MoSetupPlatform error: help
  
  transform the error code: [0x80070004] [gle = 0x000000b7]
  2014 09/11 22:24:24, error MOUPG
  CDlpTransformDataMigrate::MigrateData (1477): result =
  0 x 80070004 [gle = 0x000000b7]
  2014 09/11 22:24:24, error MOUPG
  CDlpTransformDataMigrate::TransformFile (1095): result =
  0 x 80070004 [gle = 0x000000b7]
  2014 09/11 22:24:24, error MOUPG
  CDlpTransformDataMigrate::Execute (544): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  
  CDlpTask::ExecuteTransform (3154): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CDlpTask::ExecuteTransforms (3327): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG CDlpTask::Execute (1550):
  Result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CSetupManager::ExecuteTask (1323): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CSetupManager::ExecuteTask (1288): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CSetupManager::Execute (413): result = 0x80070004
  2014 09/11 22:24:26, error MOUPG
  CDlpTask::RestartTransform (2444): result = 0xC1800107
  2014 09/11 22:24:29, error CONX [UploadTelemetryFile]
  failed to download telemetry files [0x803d0013]
  2014 09/11 22:24:29, error CONX [SendTelemetry] has no
  Download the file of telemetry on AEStat
  2014 09/11 22:24:29, error MS
  CSqmSession::SetSQMEndTime: Cannot set EndTime for datapoint with Id = 12576.
  DataPoint not found
  2014 09/11 22:24:29, error MS does not have end M²
  time. HR = 0 x 80070490
  2014 09/11 22:24:29, develop the error MOUPG: Error reporting
  Finalize time: [0x80004005]
  2014 09/11 22:25:45, error MOUPG CSetupHost::Execute (209):
  Result = 0x80070004

  Hello

  Thanks for posting your query in the forums of Windows.

  I understand that you get an x 80070002 error message when you try to update Windows 8 to 8.1 Windows. We're really sorry for the inconvenience caused to you. If you receive Error 80070002 while accessing applications on Windows store or by updating to Windows 8.1, you must delete the temporary files to update that Windows uses to identify updates for your computer. You might face this problem due to several reasons like corrupt Windows Update components, software Antivirus installed on the computer, third, conflicts etc. I would suggest trying the following steps and check if it helps.

  You can refer to the suggestion of Praseetha K Nair in the following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_store/after-updating-to-Windows-81-receiving-error-code/a0efca65-233D-42DE-A58B-f1f8455fd59e

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• P7-1299cb: no sound for desktop computer after update to windows 10

  I have a desktop computer that used to run windows 7 and finally decided to upgrade to windows 10.  Update had no problems, but I have no sound.  I tried to update the driver through windows update and HP support assistant, both did not acknowledge the problem

  Windows update, I get the following message: IDT - Audio Device - IDT High Definition Audio CODEC - error 0x8007001f

  Please any advice would be appreciated.

  Thank you

  Hello:

  The page sheet product indicates that your PC came with W7 64 bit.

  I can tell you that there is no audio driver W10 32 bit.

  If you have inadvertently posted the wrong bit version, see if this W10 64-bit IDT audio driver works...

  This package provides the Tempo IDT High Definition Audio Driver for assumption of office models that are running a supported operating system.

  File name: sp71717.exe

  Otherwise, there is a workaround solution that you can try to get at least the noise at work...

  Go to Device Manager and click to expand the category of audio, video and game controllers device.

  1. Select IDT High Definition Audio CODEC under this category.

  2. Select the driver tab.

  3. click on Update Driver... button.

  4-> select Browse my computer for driver software.

  5. Select-> Let pick me from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  A warning message may appear, but click Yes.

  7 Windows has updated your driver software.

  8 restart the PC.

  The key is step 6.

• 700 - 230qe envy: after upgrade to Windows 10, I have no sound

  I have no sound after upgrading to Windows 10.  When I try to update driver I get error 0x8007001f Audio device IDT High Definition Audio CODEC.    Also get audio servicd without answering

  @gemini2

  Try this.

  1. Select the CODEC Audio IDT high definition in Device Manager.
  2. Select the driver tab.
  3. Click on update driver... button.
  4. -> Select Browse my computer for driver software.
  5. Select-> Let pick me from a list of drivers for devices on my computer.
  6. Select high definition Audio Device (not IDT High Def... that's important...) and click Next. Displays warning message, but the answer Yes.

  REO

• Download 0x8007001F error message when you install the latest updates in Windows XP.

  Original title: problems with the update of my compooper (computing)

  Windows will not update it after updates KB2707511, KB2699988, KB2709162, KB2685939, KB2510531, KB2544521, KB2718704. I already got an answer to a clean boot and I did with no results, I also re installed IE8 with still no result. I get the 0x8007001F error code and all these updates keep in default even after using Mr. Fixit. This becomes a real headache. My computer is constantly freezing up and I lost my audio controls, it does not at the moment where opening tabs announces that there is a long list. Please, someone give me a remedy for this nightmare.

  Your suggestion of a clean boot is not resolution, I first had to remove a virus with Norton and then install the latest version of IE 8, then updates went through. I also had to use the Norton Power Eraser program in order to irradicate of other inhibitory start-up problems which were deeply rooted in my hard drive. Thank you for your attempt to help me, but I was the one who had to understand this. Now, my computer is high and GREAT work! I would say that MSN and Norton to collaborate in trouble all program and incorporate into the program of Mr.Fixit you who will remove the virus and update at the same time in order to avoid such a period of long downtime for all customers who have similar problems.

  Sincerely,

  Clinton joints

• 0x8007001f error code

  I trieg run 11 update and they all failed error code; 0x8007001f. I tried more than once. Same error of all time.

  Thank you * address email is removed from the privacy *

  Among the updates:

  Update security for Windows Xp (KB2585542)

  Fior updated security Windows XP (KB2723135)

  Update security for Windows XP 9 KB 27331847)

  Hello

  You have all 3rd party antivirus installed on your computer?
  Try the methods provided and check.
  Method 1:
  If you have a software antivirus installed on the computer, then turn it off.
  Warning: If you need to disable temporarily to install additional software; You must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Method 2:
  Perform a clean boot and then try to install the update. Check if the problem persists. Check out the link and follow the steps.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: Once the diagnosis is made, follow the steps in the article to configure the computer to start the Normal start.
  Method 3:
  You also check out the link and follow the steps.
  Cannot install Windows updates
  http://support.Microsoft.com/kb/555461

• Why I can't update windows and fail. and the error is 0x8007001F

  Why I can't update windows and fail. and the error is 0x8007001F

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  and/or

  Claire on your temporary internet cache.

  and/or

  Rename the folder C:\Windows\SoftwareDistribution

  Click Start, choose run.
  In the run box, type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Click on stop.
  Stopping the service will take a moment.

  Rename the folder "C:\Windows\SoftwareDistribution":
  a. Click Start, click Run, type %any and then click OK.
  b. right-click on the C:\Windows\SoftwareDistribution folder, and then click Rename.
  c. Type SoftwareDistribution.old, and then press ENTER to rename this folder.

  Click Start. Choose run.
  In the run box, type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Click Start.
  Starting the service will take a moment.

  Restart if necessary and try and update again.

  You will notice that you will lose your history of updates, but it's not important.

  If everything works well again, you can delete the old renamed folder.

• Error code 0x8007001F when reinstalling Windows Vista

  Well I try to perform a restore of the system since the restore disc, that I got with my PC 4 years and it copies the files and broadens their and then I get the 0x8007001F error code and he said: he can't complete the installation.

  Please can I just get a new clean copy of vista?

  Well I try to perform a restore of the system since the restore disc, that I got with my PC 4 years and it copies the files and broadens their and then I get the 0x8007001F error code and he said: he can't complete the installation.

  Please can I just get a new clean copy of vista?

  Hey becci1978

  you don't say why you were reinstall vista

  You may have a hardware problem with your computer that causes the error

  I suggest you contact your computer manufacturer for assistance with the help of their recovery methods

  Walter, the time zone traveller

• Cannot install updates. Error code constant of 0x8007001f.

  IE8, SP3 and windows reinstalled update. Still can not install new updates.

  Hello

  (1) update that you are trying to install?

  (2) what is you get the exact error message?

  (3) remember when you make changes to the computer before the show?

  I would suggest trying the following methods and check if it helps.

  Method 1: Run Microsoft Fixit
  The problem with Microsoft Windows Update is not working: http://support.microsoft.com/mats/windows_update/

  Method 2:
  You can also try the steps in the link and check if it helps.
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:
  http://support.Microsoft.com/kb/322756/

  Method 3:
  If the problem is not resolved, I suggest you try the procedure described in the link mentioned below.

  You cannot install some programs or updates: http://support.Microsoft.com/kb/822798

  Note: It is very important that you back up all your personal data before going ahead with the upgrade on the spot.

  Follow the article below to learn more:
  Temporary connection related errors may occur when you use Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/836941#advmethodC

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Several updates fail with 0x8007001F

  Windows XP, 2699988 and 2632503 updates fail with 0x8007001F error code. He had 11 updates fail, manually installed microsoft.com/download 10, but could not be the last of them. Follow-up of the diagnoses of FixIt to manually reset Windows update, the re-registration of the DLL and clear the distribution of software with several stop folder net start commands, no solution.  Added an optional update and it did not. Tried several profiles and reboots.

  The user has installed Real Player about two weeks ago. Symentec Endpoint Protection started Pavilion virus after that. Do you have a manual removal of Real Player. Scanned and cleaned with MalwareBytes and seven. No other problems not reported except this problem of Windows Update.

  I paid $49 for support chat. Anoop representative quicky identified a rootkit virus. Fixed with Kapersky anti-rootkit utility TDSSKiller and complete a reset of settings IE. One of the symptoms that identified, he was Manager of disc appears not all discs. Closed question.

• Cannot use Windows Update - KB982132 and KB972270 fail to install, error 0x800A0007

  I can't using Windows Update for two 'critical updates of security". I got anumber of error messages, but the last was 0x800A0007. This is nowhere on their support pages. Can someone suggest a possible solution?  (If I can solve this problem, I can get IE9 fixing.) With the help of Windows XP Edition family

  The two KB982132 and KB972270 updates failed to install (twice) with error message that appears now is no longer on the 0x8007001F support page.

  Since that time when I get to "check your computer for Updates" page fails to display and code error 0x800A0007, which also appears nowhere.

  Norton Internet Security Firewall is disabled and the Windows Firewall is enabled.

  Thank you-

  Do not uninstall IE8 or IE7 before doing a repair installation leaves the two Internet Explorer and Windows in a "confused" or "broken" State - so your Windows Update (if any) problems.

  I'm sorry to tell you that your only recourse now formats the hard drive & then by doing a new installation of Windows. [1]

  Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional help with the clean install, please start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

  =======================================================
  [1] PS: I learned that the hard way, too, many years ago!