Error 0x800704b3 when you try to map a network drive

Hello

I have the following error message when you try to map a network drive in my home network:
"\\iomegahmd cannot be reached" and the error code is 0x800704b3.

I already looked in the services, and my strong assumption is that the problem is that 'TCP/IP NetBIOS Assistance' service is not statrted and it is disabled. When I try to start it, there is an error message:
"The system could not find the specified path".

I also checked the dependency of the 'TCP/IP NetBIOS Assistance' service components:
Auxiliary function for Winsock driver
NetBT
TCP/IP protocol driver
NetIO-legacy-TDI Support driver
in the Device Manager is running, but they are all running. Startup is set to 'system '.

Under the properties of version 4 of TCP/IP Internet of the wireless device, under Advanced-> WINS I ve put enable NetBIOS over TCP/IP, but it helps t is not either.

What else could try, so that I can map network drives?

I should also mention, that the problem persists for a few weeks. Before, it was working properly. In addition, on other computers on my network I don't have access to the same network drive problem.

Thanks in advance,
Tithe

> I should also mention that the problem persists for a few weeks. Before, it was working properly.

It of difficult to say what's wrong in your case. My first idea is: put installation beginning point of time before this error appeared.

I recommend also to disable all security software and check if you experience the same problem.
If you still experience the problem, then follow the link to fix the damaged user profile.
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

Tags: Toshiba

Similar Questions

  • error ikernelexe when you try to install the multimedia driver

    When you try to install the multimedia driver, I get the following message: "error installing ikernelexe. Using Windows XP. Please notify.
    Thank you

    Hi MarkPfeffer,
     
    This problem may occur if one or more of the following files are missing from the Windows\System32 folder:
    • Stdole32.tlb
    • Stdole2.tlb
    • Stdole.tlb

    Follow the steps listed in the article given to solve this problem:

    Error in Ikernel.exe when you install programs using InstallShield

  • 1935 error message when you try to install the device driver for the wireless broadband

    need help addressing an error message when you install a device wide band.   Error 1935

    Hello

    1. have you done any book to the computer before this problem?
    2. What is the exact error message of th?
    3. What is the brand and model of the computer?

     
    Method 1:
    I suggest you perform the steps in the section "" method 1: repair the installation of .NET Framework 4' and ' method 4: repair the .NET Framework "in the following article." You can ignore the title of the article.
    http://support.Microsoft.com/kb/2507641

    Method 2:
    Unregister and re-register Windows Installer
    Unregister and re-register Windows install to fix the Error 1935 in Windows. Follow the steps below to reregister Windows Installer.
    a. Click Start, click all programs, and click Accessories.
    b. right click on command prompt and run as Admin
    c. type following commands
    msiexec /unreg
    msiexec/regserver
    d. Exit at the command prompt

     
    Method 3:
    Run the System File Checker
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833
     
  • Stopper 0x000000F7 blue screen error occurs when you try to access the floppy drive.

    The error occurs on computers 3differnt.  Sometimes using "My Computer" to access the floppy drive.  Malware, spyware and viruses, the computer has been verified.  Clean everything. No new disk drivers listed.

    Tell us what you have done that you are convinced that it's clean... Here is a description of the error code in the Windows debugging tools help file:
    "Bug Check 0xF7: DRIVER_OVERRAN_STACK_BUFFER.
    Bug Check 0xF7: DRIVER_OVERRAN_STACK_BUFFER

    Bug DRIVER_OVERRAN_STACK_BUFFER control has a value of 0x000000F7. This indicates that a driver has saturated a stack-based buffer.
     
    Parameters

    The following settings are displayed on the blue screen.
    Description of the parameter
    1 the battery's actual security check cookie
    2 the expected security check cookie
    3 the bit complement of the expected security check cookie
    4 0
     
    Cause

    A driver invaded a buffer based on the stack (or a local variable) in a way that would have replaced the function's return address and jumped to an arbitrary address when the function returned. »

    This is the classic "buffer overflow" attacks of piracy in my opinion. The system has been reduced to prevent a malicious user to take complete control of it.

    This is very probably a malware problem or a problem with a driver.  I suggest several anti-malware scans to make sure you are clean and then begin to check your drivers to see if there are some more updated versions available.

  • Error 800703eb when you try to connect the network printer

    HII guys, can someone help me on this problem?

    I am trying to install the network printer. But I face the error code 800703EB and another description is cause to line 4 and 1 from vbs code tank.

    The following vbs code to connect the computer to the network printer:

    1. '
    2. ' Printers.vbs - Windows Logon Script.
    3. Set objNetwork = CreateObject
    4. objNetwork.AddWindowsPrinterConnection \\printserver\xerox2

    I am very grateful to the response of anyone on this issue, thank you very much.

    Hello

    (1) have you made changes before the start of this issue?

    (2) what is the brand and model of the printer?

    Perform a clean boot and try to connect to the printer:

    Step 1: Clean boot

    How to set up Windows 7 to start in a "clean boot" State

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Step 2: Try to download and install the latest printer drivers.

    Please visit the websites below:

    Install a printer

    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

    Install a printer on a home network

    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

  • "Unexpected error" occurs when you try to create a network with a security profile wpa/wpa2 enterprise

    I recently started using Windows 7 x 64 and I'm unable to create a network with WPA2 - Enterprise Security profile.  I have a wireless card for Intel PRO/Wireless 3945ABG with 13.0.0.107 driver version.  I have had no trouble to create this network in Vista Ultimate x 86 profile, and I do not know what is causing the error.

    I went through the steps to create a network profile:
    1 'Add' a network profile
    2 ' manually create a network profile '.
    3 name the profile, and then select WPA2 - Enterprise with AES encryption

    When I click on 'Next' to complete the configuration of the profile I just get a message that says:
    "An unexpected error has occurred."

    Has anyone experience the same problem?

    Thanks to another post and help Orgwizard, followed it to Symantec Endpoint Protection. I had emigrated from laptops using the Easy Transfer Wizard and did not reinstall MS and sought instead to Microsoft Security Essentials. MSE deleted and reinstalled MS and everything is fine now!

  • I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

    I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

    It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

    Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

    If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

    As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

    But it's your call.

  • Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

    Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

    It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

    Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

  • Keep gettig this error message when you try to connect to Firefox, the proxy server refuses connections.

    Redownloaded Firefox and keep getting this error message when you try to connect: proxy server refuses connections

             Firefox is configured to use a proxy server that is refusing connections.
    
     Check the proxy settings to make sure that they are correct.
     Contact your network administrator to make sure the proxy server is
       working.
    

    Go to Options > advanced > network > connection > settings, then choose 'no proxy '.

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    It is important that you keep updated IE. The information included with your question indicates that you use IE7; you need to update to IE8 for your own protection. IE9 will be available for Windows XP.

  • HP 15 F018dx: Error notice when you try to search the drivers + occasional noise from the fan

    Hello. I just did a scan of software on the hp site and it recommended related diagnostic software and I installed it.

    But when I try to do a software scan and the pilot of "search for the updates and recommendations" on the website of HP support for my laptop model, I always have this:

    "HP has encountered an error when trying to analyze your product.

    Please verify that your product is turned on and connected, and then try again in a few minutes.

    Or display all drivers available for your product below. »

    I'm sure that my laptop is up-to-date with software and drivers because my HP support assistant software can't find nothing available, but I'm just curious as to why I get this error on the hp site.

    Another thing.  Very rarely, it looks like one of the fans (or is the hard drive?) in the laptop will be rev suddenley plus enough fort. If I stop the laptop turned off and on again, the fan noise is back to normal - nice and very quiet. Even just quickly put the laptop to sleep and wake it will fan (if that's what it is) back to normal. This loud fan noise maybe happens once every 2 weeks if I average.

    Initially, I thought that this problem of fan noise may be caused or related to a game (asphalt 8) that seems to cause fans to redouble efforts in general (but this casual loud fan noise I'm talking is much stronger than that) when the game is played and the problem seems to occur more frequently with installed. However, I uninstalled it for a few days (although I don't know if I did a reboot after that I uninstalled it) and it arrived this morning after starting with past nothing. I suppose it could still be linked to the game, but I'm not sure. I restarted the laptop and now it is fine.

    As I said that the problem occurs very rarely and most of the time my laptop is very quiet, but still I would like to understand/fix the issue if I could. It of one of the reasons why I was trying just a software/driver scan to see if something is recommended on the site but when I do this pilot analysis I get this error and have always.

    Thanks for any help or suggestion.

    Tom

    Hi @tomstar,

    Thank you for posting. I read your post, and I understand that you received the error message when you try to run a verification of updates and recommended software on the HP Web site. You need not worry since this could be a problem connecting to the HP Web site.

    For the issue of fan, here's a document can help: computers laptops HP-Fan is Noisy and runs constantly, PC is hotter than normal

    Let me know how it goes.

    To say thank you, click on the "thumbs-up". Accept the post as a solution, if your problem solved, so that other people have the same problem can see it.

    Kind regards

  • After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

    After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

    It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

    The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

  • Error message when you try to download files - WINDOWS SECURITY, these files cannot be opened. Your internet security settings prevented one or more files being opened.

    Original title: C:\windows\system32\icacls.exe
    For the last few days I tried to download the different elements as well as download Trend Micro security/antivirus protection.  Whenever I do; try to download something or download something, I get the following error:

    WINDOWS SECURITY, these files cannot be opened.  Your internet security settings prevented one or more files being opened.
    C:\windows\system32\icacls\exe

    I have not found anything within windows security who would do this and when I get this error C:\... it just on my screen flashes, then disappears.

    Any suggestions?  I really need to download Trend Micro.

    Thank you
    Amy

    See the article below:

    ID of the KB Article: 2588679.
    Error message when you try to open some files in Windows 7: "your Internet security settings prevented one or more files being opened."

    Check the following settings:

    Right-click on the downloaded file. Select Properties.
    Click the Unlock button.

    Check the suggestions the following threads:
    http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/ab6de772-CE20-4621-88ce-5ae568369826

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/these-files-cant-be-opened-your-Internet-Security/7bbe6bc9-d89f-4407-81fa-ea4c24b39aaf

    Let us know if that helps.

  • I get an error 80070643 when you try to do an update. __

    I get an error 80070643 when you try to do an update. Using Windows 7 Pro. The updates seem to be security patches. Any ideas?

    Hello

    Windows Update error 80070643 can happen for several reasons. The most common cause is a problem with the .NET Framework is installed on the computer. You can also encounter this error when installing updates for Microsoft Office 2003. If you were installing Microsoft Office 2003 updates when you received the error, follow the instructions in the "Microsoft Office 2003" section below. Otherwise, follow the instructions in the "Windows.NET Framework" section in the article below:
    Windows Update error 80070643
    http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

    Also see the article below:
    You receive the error 0 x 643, error code 0 x 80070643 or updates may be offered again when you try to install the .NET Framework updates when you use Windows Update or Microsoft Updates
    http://support.Microsoft.com/kb/976982

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • 00643 error code when you try to install important update __WHy?

    Several times the same error code - tried this only started recently - what am I doing wrong? Can someone help me please

    Operating system? Update in question?

    1 Windows Update error 80070643
    http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

    2. Windows Update error 80070643
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

    3. you receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates
    http://support.Microsoft.com/kb/958052

    4. you receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services
    http://support.Microsoft.com/kb/903772

    and finally -.

    5. When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
    http://support.Microsoft.com/kb/923100

    and/or

    When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
    http://support.Microsoft.com/kb/976982

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • 490 error code when you try to install service pack 2 with vista

    I have service pack 1 installed on my computer but I get an error message when you try to install service pack 2

    blztcj,
    Take a look at this article and try the steps inside:
    Troubleshooting Vista Service Pack installation issues

    Post back with the results.

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • adjust the top bar

    1. How can I get the tabs to the right next to the firefox orange-menu button at the top?2. How can I get my add-on which decreases the size of my bookmark bookmark-fields (smart bookmarks bar) for not being as wide as it is? Bookmark icons finished

  • HP SLATE 6 VOICE TAB - AFTER THAT INSTALLATION 4.2 ANDROID RESTARTING PHONE.

    Hello 2 months back, I bought this phone. Today, there is an update on my HP Slate 6 for upgrade version of Android and once its done, the phone continues to display the home page frequently but againg goes back to restart with HP logo screen I have

  • stop a loop without waiting for its next iteration

    I wonder if there is a good way, or still anyway to stop a while loop without waiting for its next iteration. Lets say you have a timer in the loop so he iterates once evey 10 seconds, and then you have to wait 10 seconds for him to stop after you pr

  • IdeaPad Y710A Radeon 2600 drivers for Vista the serial number of the computer is EB07637793

    The drivers for the Radeon keep crashing the video card. Are there problems with the drivers for this card. The pilot's accident only happens when my son plays world of Warcraft on the Lenovo Ideapad. The screen is normal for a period of time, then a

  • Try to get the laptop connected to my network?

    I have a laptop Sony Viao, who still works on windows XP and it will not connect to my wireless router, my vista desktop works perfectly well. The error message I get when I get my reading key of the network, "the network password needs to be 40bits