Error 0x80071AC3: the operation is not successful because the volume is dirty

I have just reformatted my hard drive... 500 GB of Buffalo
but after that, I tried to move files on the hard drive and I got the error code.
How can I solve this problem?

Hi Izzat Emir,

I suggest you perform a check disk (Chkdsk) and check if it helps.

http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

Chkdsk WARNING: When running Chkdsk on the drive if bad sectors are found on the hard disk, repairing this sector if all available data on this sector can be lost.

Tags: Windows

Similar Questions

  • copy files from my C drive to my external drive error E 0x800718ac3: the volume is dirty?

    Original title: can anyone help with this problem error 0x800718ac3: the volume is dirty?

    I am trying to copy files from my C drive to my external drive E using the operation drag and drop method. That's what happens "error 0x800718ac3: the volume is dirty" can you help me?

    Hello

    1. What is the full error message?

    2. what operating system is installed on the computer?

    3 did you changes to the computer before the show?

    4. What are the names of files and the exact location of the files you are trying to copy?

    Method 1:   Format the external drive of E and see if that helps.

    Reference:

    Formatting disks and drives: frequently asked questions:

    http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

    Note: Format deletes the data on the disk. Be sure to back up data before the format.

      

    Method 2: You can check the external E drive to find errors.

    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

    Reference:

    Check a drive for errors:

     http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  • "Unable to connect to the printer operation was not successful"

    I use the operating system Win Xp I have the WiFi network and I can't connect to any shared printer on my computer. She has a massage error like
    "Unable to connect to the printer operation was not successful"
    Can you please help me solve this problem

    Thank you
    Ramil

    Hi RamilAnuja,

    ·         This is the first time that you connect a wireless printer?

    Method 1: See if you follow the steps as suggested here.

    Microsoft Windows XP - to connect to a printer on a network

    Method 2: Check to see if this article helps you.

    How to set up a wireless network (WLAN) in your home

    See also:

    Microsoft Windows XP - overview of network configurations

    Printer in Windows problems

  • Error creating - snapshot operation is not allowed in the current state

    Hi all

    Using Veeam Backup & Recovery 6 software to replicate a LIVE VM (virtual MACHINE, 1). But I can't and I got the following error:

    Error creating - snapshot operation is not allowed in the current state

    The above virtual machine can only be copied when it is STOPPED the VM is running on ESXi 4.0.

    I have a more LIVE VM (virtual MACHINE, 2) on the ESXi Host which I was able to replicate successfully to another ESXi host.

    I contacted the Veeam Support before posting here.

    Things to note about VM 1: I can't take a snapshot manually from the vSphere client. This option is greyed (disabled) on VM1... While its OK on VM2.

    Veeam support told me that since its software uses the snapshot function of ESXi and this feature is disabled, replication cannot continue.

    Thanks for helping me on this.

    Exactly what I thought. When you delte this PCI passtrough your Backup Exec tape will not longer work.
    You will not be able to do replication when you use this passtrough.

    Only solution for replication (which is what I think you want for purposes of disaster) is to install a 3rd VM (or as physical) as "Backup Server" where you install Backup Exec and enable PCI-Passtrough to your tape drive. Then this new virtual machine with Backup Exec backup.

    After that you can delete the passtrough of your SBS and your replication will work.

    Sorry

    Concerning

    Simon

  • Error message - "this application could not start because the side-by-side - configuration - is incorrect, when you access programs."

    Hello

    Any help step by step to address this issue would be welcome

    On a Fujitsu laptop running Vista and MS office 2010, when I try to access word, excel, or one of the other programs, I get the following error message - "this application could not start because the configuration - side by side - is incorrect." see the applications for more information event log"

    Thank you in anticipation

    Hi BackrowSteve,

    1. did you of recent changes on the computer?

    Method 1:

    If you are facing the issue only with the Office programs, you can read the following article and check if that helps:

    http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

    Method 2:

    If not, then you can uninstall all existing versions of Microsoft Visual C++ Redistributable Package and install the latest version of Microsoft Visual C++ 2010 redistributable and check if it helps.

    Step 1: To uninstall the package:

    a. open programs and features.

    b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

    c. click on uninstall at the top of the list.

    Step 2: Download and install the latest package depending on the version of Windows Vista, you use and see if it helps.

    Package redistributable Microsoft Visual C++ 2010 (x 86)

    Package redistributable Microsoft Visual C++ 2010 (x 64)

    Hope this information is useful.

  • Error code 797: connection is not available because there is a problem with your network card or modem

    I have a Windows 7 laptop. I use broadband (DSL) to connect to the internet. Lately, I have an error with the code 797. It says connection is not available because there is a problem with your modem or network card. I have a Sony Vaio e series laptop.

    Hi Muffakham,

    Thanks for posting your question in the Microsoft Community forums.

    I see from the description of the problem that you are unable to connect to the Internet and receive "Error Code 797 connection is not available because there is a problem with your network card or modem".

    I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

    To provide the proper resolution, that I would need more information on your side.
    Did you the latest changes on the computer before this problem?

    This problem may occur because of damaged or incompatible, drivers connection settings incorrect network, hardware or software problems and missing updates.

    Method 1:
    I suggest you try the procedure described in the article and see if it helps.

    How can I troubleshoot network card?
    Method 2:
    If the problem is not resolved, I suggest you try the procedure described in the article and see if it helps.

    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Check out the link for more information.

    Let us know the status of the issue after you perform the troubleshooting steps. If you need information about the problem with the connection to the Internet or get help, I'll be happy to help you. We, at tender Microsoft to excellence.
  • Install Acrobat 10 on Surface by 3 with the error "Error 1006, the volume of a file has been externally modified."

    When installing acrobat 10 on Surface Pro 3, had Error 1006 "the volume for a file has been externally altered', how to fix?

    Hi rickyf36983392,

    Try to install Acrobat X using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X.

    Kind regards

    Nicos

  • chkdisk-type of file system is NTFS, the volume is dirty, what it means

    When I turn on my computer, I see the following: file system to check on C: the type of the file system is NTFS, the volume is dirty.  What does that mean?

    A volume can be marked as dirty, if the system underwent a power interruption (power failure, pulling plug, removing the battery, button / stop), abandoned restart or an abnormal termination.  One of these events?

    When XP starts, it automatically checks the bit of impurity on each volume.  You can also tell XP to ignore the bit of impurity on any volume, but this probably isn't a good idea in case there is a real problem that needs to be fixed.  If you have a hard drive where the dirty bit will not be deleted, you could tell XP to check everything just do not.

    If the starting XP detects the volume is dirty, it will automatically run the disk with error correction (chkdsk/p) check and try to fix the problems detected.

    You can check the status of your bit of impurity from a command prompt window.

    To do this, click Start, run and enter in the box:

    cmd

    Click OK to open a command prompt window.

    For example, to query the bit of impurity on drive C, type:

    fsutil dirty query C:

    The sample output:
    Volume c is dirty
    Volume C: is dirty

    You cannot use fsutil or chkntfs from a command prompt to delete the bit of impurity on a volume.

    This does not mean that a disk check is scheduled to run, and you can't cancel what needs to happen in this case because this isn't the problem.

    You also won't solve this problem by editing your registry database - not where is the problem.

    Once a volume is marked as dirty, the only way to clear the dirty bit is to run "chkdsk/r" or "chkdsk/p" when the volume is not in use.  The only way a volume can not be used while XP is just starting to load or from the XP Recovery Console.

    If XP will not run chkdsk correctly when your system restarts or the dirty bit will not erase as it should, you need to look in the Event Viewer log chkdsk and see what is happening and fix it.

    If XP will not always clear the dirty bit, you need to run chkdsk/r of the XP Recovery Console so you can look and see what works and run it again until it works.  If your hard drive fails, you may never be able to clear the dirty bit, in this case, you can also say XP never check the afflicted volume dirty bit.

    Saying XP not to check the bit of impurity on a volume would be risky behavior because there would always be some kind of problem with your hard drive.

    When chkdsk runs automatically restart either because XP thinks he needs to (perhaps your NTFS volume has been marked as dirty) or you have chosen to do the chkdsk command yourself, the results appear in the viewing Application event log.  You should look there for the chkdsk log to see what happened and no problems after running chkdsk.

    To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

    A shortcut to the event viewer is to click on start, run and enter in the box:

    %SystemRoot%\system32\eventvwr.msc

    Click OK to launch the event viewer.

    Search the Application log for an event originally by Winlogon, something like:

    Event type: Information
    Event source: Winlogon
    Event category: no
    Event ID: 1001
    Date: 04/08/2010
    Time: 11:25:57
    Description:
    Checking file system on C:

    The type of the file system is NTFS.

    One of your disks needs to be checked for consistency. You
    may cancel the disk check, but it is strongly recommended
    that you continue.

    Windows will now check the disk.

    Cleaning of minor inconsistencies on the drive.
    CHKDSK checks Usn Journal...
    Audit of the USN Journal is complete.

    39070048 KB total disk space.
    28017948 KB in 100571 files.
    56540 Ko 10556 index.
    0 KB in bad sectors.
    236440 KB in use by the system.
    65536 KB occupied by the log file.
    10759120 KB available on disk.

    4 096 bytes in each allocation unit.
    9767512 total allocation on the drive units.
    2689780 allocation units available on disk.

    Windows has finished checking your disk.
    Please wait while your computer restarts.

    The dirty bit fade not until chkdsk /r (or chkdsk/p) tracks clean when the system reboots (as in the example) or when you run chkdsk /r from the XP Recovery Console.

    If for some reason chkdsk will not erase the dirty, you say XP never check the bit of impurity of a player, but that will not set your fault of potentially hard drive, or he could be the player just needs have chkdsk to run on it for some other recoverable error condition.

    A simple power interruption is something that could result in a disc was marked as dirty.

    The event log is where you need to look to see what to do about it.

  • Checking file system on C: the Type of file is NTFS. The Volume is dirty. -What this means and how do I clean the Volume, please? My computer is Dell XPS

    Recently, when I turn on my computer is starts, guests of the computer and starts check my system files as follows: "checking file system on C: the Type of the file is NTFS. The Volume is dirty. "That is what this means and how can I clean and maintain the clean Volume, please? My computer is Dell XPS

    The computer system continues and invite "CHKDSK checks the files (step 1 of 3)... .

    The system deletes some files and at the end of shows, complete audit files and then show

    CHLDSK is verifying indexes (stage 2 of 3)...

    Once again, it shows the following:

    Deleting Index Entry _64280 ~ 1. jpg in index file 4632 $130

    Deleting Index Entry _64280552_little-mix_211112_get [1] .jpg in index file 4632 $130

    Deleting Index Entry 69gw [1] .jpg in index file 6722 $130

    Remove entries of Index 69 GW_1 ~ 1. jpg in index file 6722 $130

    Deleting Index Entry _64274754_messi_211112_elvis [1] .jpg in index file 6722 $130

    Deleting entry Index _64274 ~ 1. jpg in index file 6722 $130

    Finished the index checking

    CHKDSK is checking security descriptors (stage 3 of 3)...

    100%

    CHKDSK checks usn Journal...

    Windows control disc is finished.

    After all checks, Windows proceed to start as usual.

    I would like to know if I need the dirty Volume, and if so, how can I carry out the cleaning operation.

    Sometimes, at the early stage of the CHKDSK, the computer makes a pe. .. PE... noise and cut.  Then I turn the computer off via the key of the insulation. When I restart the computer, it then runs the check again until the end.

    Please advice me on the following points:

    1 is this normal as he started only happening in recent weeks?

    2. How can clean the Volume in order to show "Volume is clean instead of sale"

    I look forward to hear from you.

    Thank you

    Hi, Dr.,

    Volumes that contain file system errors are known as Sales. To indicate that a file system problem has occurred and that the volume is dirty, Windows XP Professional displays a message similar to the following when you try to open, delete, or rename a file or folder by using Microsoft Windows Explorer or the command prompt:

    Autochk runs if the volume is marked as modified.

    If the file system has marked the volume as dirty, Autochk runs the Startup Repair process. Volumes are marked as dirty, when the file system detects an error on the volume. If Autochk detects a dirty volume, it provides a delay of 10 seconds, and then starts the repair process. If you cancel Autochk when a volume is dirty, Autochk tries to run again after a 10 second delay every time the computer is restarted.

    See Chkdsk for all the necessary explanations:

    http://TechNet.Microsoft.com/en-us/library/bb457122.aspx

    Run the Dell Diagnostics to check the drive failure.  If the disc is a failure, it must be replaced.

  • The operation did not complete because the disk management console view is not updated.

    Disk title management error: Windows 7 original by adding a drive letter
    Well, I don't know why this is happening, but if I try to add a disk to my windows system, it will not automatically add a drive letter, but it will add a drive letter to my USB and USB external drives without problem. It's just when I plug it in sata he's going all wobbly. I see the HARD internal disk in disk as a disk, but windows disk management Refuses anyway shape to add a drive letter, even with diskpart automount enabled. This is the error I get when I try:

    "The operation failed to complete because the disk management console view is not updated. Refresh the view by using the refresh task. If the problem persists close the disk management console, then restart disk management or restart the computer. »

    Absolutely nothing works. I tried Diskpart, acronis, AOMEI, EausUS, chkdsk, sfc/scannow, Microsoft fixit. Nothing works to get the drive Manager to add a drive letter to an internal HARD disk. Like I said, sticks and USB drives are no problem. I looked all over Google and I have not seen one solution to this problem short of a total erase and start again, and at this point, I'm not be done with everything I installed and might have to reinstall.

    I have other systems that do not have this problem. Just this one windows 7 install x 64. Can anyone shed some light on why this happens and how to fix it or if there is even a fix for it.

    Thank you

    Methadras

    Just to follow and finish this, the old MAIN drive has had some problems and was

    continues to worsen, it ends up by crashed.  scannow revealed some Windows system

    Files were corrupted and could not be repaired.  After the crash, I used the blank hard disc 500 gig

    and did a restore of the system since the disks created with the purchase and restored the system to

    "DAY 1".   Yes all the data and installed programs are missing, but I reinstalled my software.

    Adding external or internal disks worked without any problem now.

    I created a Windows 7/64 system repair disc.

    I created an Image of the system.

    I have a backup plan.

    I do the scheduled backup.

    I learned a lesson...

    Joe_T45

  • Error E0BB0147: the "Volume Snap" operation is not currently enabled for this Volume

    Hello!

    Since an update of my Windows XP at the end of 2011, I have problems on my HD using Ghost 14.0 backup. I get the following error message:

    -Impossible to create an image of the selected disk virtual volume.

    -E0BB0147 error: "Volume Snap" operation is not currently enabled for this Volume.

    What should I do to fix this?

    Thanking in advance for your help,.

    tico776

    Hello

    I suggest you to see link and check if it helps:

    Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    For more information about how to back up the registry, see the link:

    Back up the registry

    http://support.Microsoft.com/kb/322756

     

    Error: "error E0BB0147: the 'Snap Volume' operation is not currently enabled for this Volume" when creating a backup using Norton Ghost 14.0

    https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=United+States&docid=20080929121249EN&product=home&version=1&PVID=f-home

  • Error code 646: I could not successfully install an upgrade (upgrade of security for WORD 9, # KB2092914)

    Since 12/08/10 I could not successfully install an upgrade (update of security for WORD 9, # KB2092914.) Six times I haveEncountered Unknown Error Code 646. Any suggestions? I have Windows 7.  Thanks you

    Hello

    It is a Microsoft Fixit who will help with this issue.

    You receive code 646 error or error code 0 x 80070646 when you try to install Microsoft
    Office updates
    http://support.Microsoft.com/kb/2258121

    Check this thread:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b

    ------------------------------------------------------------

    If necessary you can incident free get reports however the above should take care of it for you.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • When computer booting XP, getting an error saying that windows could not start because a file is missing - windowsroot7\system32\ntoskrnl.exe

    When I pass my computer on a message informing you that windows didn't start because a file is manquant-windowsroot7\system32\ntoskrnl.exe, can you help me?

    * original title - computer error! *

    Hi shortie083,

    You did it of any material changes or software on the computer before this problem?

    You can follow this link & check if the problem persists.

    Error message: "Windows did not start because of a configuration of the disk of the computer problem.

    Hope the helps of information.
    Please post back and we do know.

  • After downloading, I try and install lightroom 4 and message: get operation was not successful. (com

    After downloading lightroom 4, I'll install and get the message ' operation could not completed e.» (error com. apple.installer.pagecontroller - 1.)

    Cannot open the 'adobe Photoshop Lightroom 4.pkg."

    Help, please

    What version of Mac OS are you using?  Photoshop Lightroom requires at least Mac OS 10.6.8.

  • I get the error "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

    original title: NTFS problem
    Every 5 seconds, I get a warning (event ID 136) that says: "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

    Immediately followed by an error (event ID 137) that says "on the C: volume default transaction resource manager encountered a one-time error and could not start. The data contains the error code. »

    I am running windows 7 ultimate in any way to solve this problem?

    Hello

    This problem occurs if the Windows file system transaction log is damaged. The Windows file system uses the transaction log to retrieve the system transactions when a file error occurs. The system of common log (CLFS) transaction logs may be left in an inconsistent state. When the CLFS transaction logs are in an inconsistent state.
    To resolve this problem, delete the files .blf and .regtrans-ms in the folder % Windir%\System32\SMI\Store\Machine.
    After you restart the computer, the registry regenerates the deleted files. These regenerated files are in a consistent state.
    1. click on Start , type cmd in the Search box, and then click cmd in the list of programs .

    2. click on run as administratorand then click continue.
    If you are prompted for an administrator password or for confirmation, type the password, or click allow.

    3. at a command prompt, type the following command and press ENTER:
    fsutil resource setautoreset true c:\
    Note
    these steps assume that Windows is installed in the default location, drive C. If this is not the case, adjust the drive letter of the path of the folder to match your configuration.

    4 restart the computer.

    I hope this helps.

Maybe you are looking for