Error 0x801F0004 - prohibit the fast path of e/s

Similar Questions

• Error 0x801F0004, ban the fast i/o path

  For this operation. I can't put a new folder on the desktop in windows vista Ultimate edition, above is the message I get, it has happened only recently, any ideas on a solution, I ran windows clean up, but nothing is.

  Eureka, I found the answer to this problem, I used a software called folder Lock 6 product and I put a new folder in the 'safe' and locked, the result being that he disabled the ability to place a new folder on the desktop, because the IO path was lost. But thanks to aqll who tried to help him.

  Hi Dufrazier,
   
  1. don't you make changes before the show?
  2. are you able to create a new folder somewhere else?
   
  We did check the 0x8101F0004 error code and couldn't find any information on the code. We recommend cross check if the error code is correct or not.

  In the meantime, try the following steps.
  Step 1: Create a folder in safe mode.
  1 start the computer and press the F8 key continuously to get advanced boot menu options.
  2. in the menu, select Safe mode, and press to enter.

  For more information about safe mode, see this link: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  Step 2: Scanner of sfc (System File Checker) to find and difficulty of the missing or corrupt system files. To do this, try the following steps.
  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. type the following command and press ENTER: sfc/scannow
   
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
  For more information, see this article: http://support.microsoft.com/kb/929833
   
  Return message details, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• 765 and for Thinkpad 760XD BIOS updates are missing in driver matrix and 'use the fast path.

  BIOS update for ThinkPad 760XD and 765 all are not in the download area of Lenovo - the matrix driver , or using the fast path.

  I have found the BIOS 2.13 HXET60WW 09/12/99 hidden in the Lenovo area download by trial and error:

  The README file:

  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles/spsdhx60.txt

  The update of the BIOS can be found here:

  Download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles/spsdhx60.exe

  These are versions of BIOS:

  1.00 HXET23WW 11/01/96 file not available
  1.01 HXET27WW 11/12/96 file not available
  1.02 HXET31WW 18/02/97 file not available
  2.00 HXET51WW 15/08/97 file not available
  2.01 HXET53WW 25/09/97 sytph201 README: "an error occurred during the processing of your request."
  2.10 HXET57WW 21/05/98 sytph210 README: "an error occurred during the processing of your request."
  2.11 HXET58WW 30/03/99 spsdhx58 README: "an error occurred during the processing of your request."
  2.12 HXET59WW 07/09/99 spsdhx59 README: "an error occurred during the processing of your request."
  2.13 HXET60WW 12/09/99 version README

  I submitted a request by e-mail to ask for inclusion in driver matrices.

• The cancellation of the 'file' dialog box and handle errors caused by the empty path that makes the DB connection

  Hi guys.

  I developed a VI that connects to the database reads the names of tables, columns of the selected table, etc. It works well as I want to.

  However, I have problem with identifying the UDL file with function of dialog 'file' use in a structure of the event that is triggered when the button 'Open' value is changed. It also works well, when I choose the UDL file, but the problem is when I cancel it and I get the error 43.

  I tried to deal with this problem with a "error handler" function to clear the error 43 but the next errors that are associated with the database conncetion appeared. The reason is, when file dialog is cancelled, an empty path passes by reference of connection and I can't start the while loop where are the key codes. I also used a box Structure connected to "Cancelled" with 'DB connection tool' in case of real and connection the reference connection for the while loop, but I get the same result.

  I want to apply for work as: start to push the button "Open" and select the file UDL, the loop run to establish the connections database, if not with the cancellation of the file dialog box, the application waits by pushing the button open and select the UDL file again.

  Thanks a lot for your help in advance.

  Hi lman,.

  start to push the button "Open" and select the file UDL, the loop run to establish the connections database, if not with the cancellation of the file dialog box, the application waits by pushing the button open and select the UDL file again.

  Some pseudocode, easy to implement:

  WHILE
  
    onevent(OPEN button)
      FileDialog
  
    IF file selected THEN
      open database
      do calculations
    ELSE
      do nothing
    ENDIF
  
  WEND
  

  What is your problem with the help of loops and structures of the case?

• Export Release Build: error 303 - defining the right path to the PNG file

  Hello.
  I have a 32 x 32 pixels pixels and icon in the code XML Application descriptor file, I tried all possible ways for the icon.png and I get an error message 303. My application deploys fine if I leave aside the icon... just seems to be a path issue but can not understand why... I put the file in the libs folder and tried png just in the src folder, but no luck... I saw other posts talked about checking the 'no embedded files to output folder copy' and I have this checked... Thank you!
  
  

  After trying for centuries created a flex project and copied all the code as a whole in the new project. But did not use the old app - xml file used for the new flex project and the icons have worked.

• Error: cannot read the registry path common runtime. This happens when I try to use "Topaz" or NIK filters. How to fix?

  When I go to use filters "Topaz" or NIK I get this message. It started today. Can someone give me help?

  @

  Hi Alschuler,

  Have tried to uninstall and re - install plug-ins or try and delete the files in the files to %temp%.

  https://www.topazlabs.com/downloads

  Collection of Google Nik

  It will be useful,

  ~ Mohit

• STEAM will not install. Fatal Error 1324; The folder path ' Program Files (x 86) contains an invalid character. How to fix this?

  I can't play any of my games, because STEAM refused to install... I have used their Web Site and my records... the results are the same... the same fatal error pops up...

  From the other thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-gaming/error-1324-when-installing-steam/d9515071-2fc1-405c-875a-8fd6bca91930

  Title: ERROR 1324 When STEAM plant

  I tried to install STEAM via the WEB and game discs (games include Civilization V, Napoleon - Total War & EMPIER - Total War)

  Program runs until the WIZARD of INSTALLATION of STEAM... as soon as I received an ERROR 1324. The fold path ' Program Files (x 86) contains an invalid character. It does not specify which file or which character is not valid. I tried several registry cleaners... no luck. There is nowhere any folder on the computer for the Valve or STEAM...

  I disable the security & firewall and still get the same results... The installer of Steam does not work... Help?

  Hello

  Have you contacted https://support.steampowered.com/newticket.php to help?

  Thank you!

• Calculate the fastest path between 2 nodes with the data model for the Oracle network

  Hi all,
  
  I have Oracle 10 g 2.
  
  My problem is the following:
  
  I created a network named ITALIA_NET in the data model for the Oracle network.
  The table of links of this network is named: ITALIA_NET_LINK$.
  The table of the nodes of this network is named: ITALIA_NET_NODE$.
  
  The table ITALIA_NET_LINK$ contains a field named COST that contains links (in meters) lengths.
  
  I've already calculated the SHORTEST PATH between two nodes of the network, by using the method of shortestPath() (using the Java API) as shown on "Pro Oracle Spatial for Oracle Database 11 g" manual. Infact, this method makes reference to the COST field for $ ITALIA_NET_LINK to make this calculation.
  
  Now, I want to calculate the FASTER PATH between two nodes of the network. I have the links (in hours) travel time to make this calculation.
  
  My idea is to create a new field in ITALIA_NET_LINK$ named Cost2 containing the travel time from the links and then do the math by using the shorthestPath() method, referring to the Cost2 field to $ ITALIA_NET_LINK COST field instead.
  By default, I know that the shorthestPath() method returns the COST field for $ ITALIA_NET_LINK. Is possible to change this setting and do that this method refers to the Cost2 field?
  
  In the alternative, is another way for the calculation of the fastest way?
  I want to leave the creation of another network as last solution, because I will have other costs of field (Cost3, cos4t,...)
  
  Thank you much in advance.

  Your approach is good. You will have two networks and you can read them in memory and analyze of shortest path. The shortestPath method is static for the class of NetworkManager. You can use the same method for both networks, once they are read into memory.

  ...
  read the network with time as cost of link
  NetTime network = NetworkManager.readNetwork (dbConnection, 'ITALIA_NET_TIME');
  read the network length as cost of link
  Network netLength = NetworkManager.readNetwork (dbConnection, 'ITALIA_NET_LENGTH');

  calculate the quickest way
  PathTime path = NetworkManager.shortestPath (netTime, startNodeID, endNodeID);
  calculate the shortest path
  PathLength path = NetworkManager.shortestPath (netLength, startNodeID, endNodeID);
  ...

  In the future, if you upgrade to 11g, network data model provides a load on demand (LOD) API that loads only the scores of necessary network in memory during the analysis. This command removes the restriction of the memory of the 10g (in memory API you use) API. API of LOD can handle very large networks and offers more features analysis and modeling capabilities.

  The following link contains the tutorial of NDM LOD API ready for download. Just for your information.
  https://spatial.SampleCode.Oracle.com/servlets/ProjectProcess?PageID=0Zl7oV

  Kind regards
  Jack

• The shortcut error message: the specified path is not; Maybe reinstall Firefox whenever I want to use.

  When I install Firefox, it works very well. Installation does not include a shortcut on my desktop, then when I try to start it again, I go to "all programs." Next, I get the message "the specified path does not exist. I think it has something to do with the confusion between two hard disks. C: drive, a small SSD, contains the operating system and other software. D: drive is my data disc, contains other applications, photos, music, etc. The way referred to in the error message is D:\Program Files (x 86) \Mozilla Firefox\firefox.exe.

  Firefox does not have the ability to choose a disk for installation. Is it possible that it is automatically installed on the C: drive, the shortcut continues to send on the D: drive?

  If you have any ideas or suggestions, I'd like to hear them.

  Using your file browser, look for Firefox in c:\Program Files (x 86)
  After, look in other files of the program (x 86)

  Once you find it, click with the right button on Firefox.exe and create a shortcut.
  Move it to your desktop. It work?

  Note: In the creation of shortcuts, you can without spaces. Instead of use;
  c:\Program Files (x 86), you should use; "c:\Program Files (x 86)".

• Table of path error 1430 in the loop for

  Hello!

  I have a problem with the 1430 error: path is empty or relative, which seems impossible. The thing is that I have a battery of indicators of path connected to the loop for (check the .jpg and there is no problem with writing to a file by using the paths of an array with the first and last index.) Others are not saved because of the error... to be honest, that all data paths are absolute. Record in the file of the idicator path is the work of a Subvi (merge data vi) but it is in a for loop because I need to make it available to multiple files. There is no error that occur with the work of Subvi to a path. The question is: what labview makes with the paths saved in a table between the loops? I have just run out of ideas so if someone had some time, I would really appreciate for all the tips and ideas.

  K.

  Hello again,

  If someone was interested in the happy ending: the solution is: 2 loops for. I think there must be something with the way that labview sends data between iterations. In any case - don't know how much exactly but works

  the floor is .jpg.

• Example: Pavilion 6240f: installation of clone and get the error biohd-3. How can I get the startup path?

  I made a clone to replace a failing hard drive. biohd-3 is the error code. The clone has implemented two partitions one key for a recovery disk partition hard theoriginal. I deleted the second primary partition and the recovery partition. This will be enough to read a path of startup or do I have to do something more? I have the new hard drive in an external enclosure and can be accessed. I have not tried to put in the computer from hp since the deletions.

  Hello

  The BIOS has detected a hardware error on port 3.  Try to run hardware diagnostics. If the diagnostics detects errors, then it is time to replace the hard drive. If you do, buy a non-avance format model that is less than 2 GB.

  Backup your data anda remember to create the external HP recovery media before doing anything.

• I am trying to download a WOW patch for my computer. I am using Windows 7 Home premium. I get an error message: "could not initialize storage. You may not be allowed to write on the destination path. »

  I am trying to download a WOW patch for my computer. I am using Windows 7 Home premium. I get an error message: "could not initialize storage.  You may not be allowed to write on the destination path. "I'm on my admin account, so I should have permission to play where I want to. I did have this problem before with Windows 7. Is this a problem in Windows?  Y at - it an easy fix?

  Have you tried to manually install the hotfix by clicking on it, and as an administrator?

• Script to add a domain user to the local Administrators group raises the error "the network path is not found."

  I have a Windows Server 2008 R2 domain and a Windows XP Pro workstation that has been attached to the domain and then disconnected. I am trying to create a VBS script to add a domain user to the local Administrators group.

  I log on my computer as a local administrator and run the following script:

  Dim oNetwork: Set oNetwork = WScript.CreateObject ("WScript.Network")
  StrPC Dim: strPC = oNetwork.ComputerName
  Dim OGroup: Set oGroup = GetObject ("WinNT: / /" & strPC & "/ directors")
  Dim OUser: Set oUser = GetObject ("WinNT://domainname/username")
  oGroup.Add (oUser.ADsPath)

  This script returns the error "the network path is not found."

  However, I am able to go into control panel > user accounts > enter the user name and the domain name > click Next... > choose the administrators of the 'other' group and the user name will be added to the local Admin group.

  The same script runs without error if it is launched after logon on the workstation with a domain administrator account.

  How can I get my script runs without error, when you are logged into the workstation as a local administrator?

  Best regards, Andy

  The code that I used came from here. If the syntax of the Add method is passed to oUser.ADsPAth to "WinNT: / /" & domainname & "/" & username, the script works correctly.

  Therefore, the modified script:

  Dim oNetwork: Set oNetwork = WScript.CreateObject ("WScript.Network")
  StrPC Dim: strPC = oNetwork.ComputerName
  Dim OGroup: Set oGroup = GetObject ("WinNT: / /" & strPC & "/ directors")
  Dim strUser: strUser = "WinNT://domainname/username."
  oGroup.Add strUser

  Thanks to Qasim Zaidi to show the code of work here.

  Best regards, Andy

• When I perform a net view on, I get the error system error 51 next. Windows cannot find the network path.

  Net 51 with a view system error

  I have two boxes of Windows XP that I login as administrator account. I was able to synchronize files, map network drives and can do a tracert to reach one of them.

  However, when I perform a net view on, I get the following error

  51 system error has occurred.

  Windows cannot find the network path. Make sure the network path is correct and the destination computer is not busy or turned off the coast. If Windows still can't find the network path, contact your network administrator.

  How to make this command work?

  Hello

  ·         Your computer is on a domain network?

  Follow the steps in troubleshooting this article and check if that helps:

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP

  http://support.Microsoft.com/kb/318030

  See also this article that resembles the same error.

  Error when you try to access shared resources on a computer that is running Windows 2000 or Windows Server 2003: "53 system error has occurred" or "51 system error has occurred."

  http://support.Microsoft.com/kb/259878

• Error 1314. The %appdata%\Autocad\ specified path is not unavailable

  Hi name is Kenya Caldwell and I am trying to install a program called Autocad, but whenever I do, I get the message following error 1314. The %appdata%\Autocad specified path is not unavailable.  I received a response from Autocad, but I do not understand, or not if it is correct.  Could someone help me with this problem?  Below is the message of Autocad.

  By specifying an installation location using a Windows environment variable

  Question

  When you have created a deployment or performing a stand-alone installation, you tried to specify the installation location using an environment variable, such as %ProgramFiles%, but you receive one of the following error messages:

  Please provide the path name where the customers go to install AutoCAD 2007 on their local computers.

  Error 1314. The path '% PROGRAMFILES%\..' is not available.

  Solution

  It is not possible to specify a variable of environment such as installation or the installation of customer location in a stand-alone installation or network deployment. If you install to different locations on different machines, it is strongly recommended that you use the deployment wizard to create several configurations of deployment for each location.

  To use a variable of environment as the installation location, you must run the installation of the product from the command line. This can be done by entering the following in the command line Windows or via a batch/script file.

  Note: This installation method is not tested or supported by Autodesk.

  Stand-alone installation

  MsiExec.exe /i "\Bin\AcadFEUI\acad.msi ' INSTALLDIR=%PROGRAMFILES%\

  Note: Replace the drive letter containing product for disk. Replace the rest of your installation for location. It is strongly recommended to use paths without spaces for this type of installation.

  Kenya Caldwell

  Salute to the Kenya,

  Try the steps mentioned by me in my first post and verify if the problem persists.
  See cannot install AutoCAD

  Visit our Microsoft answers feedback Forum and let us know what you think.